summaryrefslogtreecommitdiff
path: root/drivers/clk/bcm/clk-iproc.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk/bcm/clk-iproc.h')
-rw-r--r--drivers/clk/bcm/clk-iproc.h22
1 files changed, 21 insertions, 1 deletions
diff --git a/drivers/clk/bcm/clk-iproc.h b/drivers/clk/bcm/clk-iproc.h
index d834b7abd5c6..8988de70a98c 100644
--- a/drivers/clk/bcm/clk-iproc.h
+++ b/drivers/clk/bcm/clk-iproc.h
@@ -49,6 +49,18 @@
#define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4)
/*
+ * Some PLLs use a different way to control clock power, via the PWRDWN bit in
+ * the PLL control register
+ */
+#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
+
+/*
+ * Some PLLs have separate registers for Status and Control. Identify this to
+ * let the driver know if additional registers need to be used
+ */
+#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
+
+/*
* Parameters for VCO frequency configuration
*
* VCO frequency =
@@ -88,12 +100,19 @@ struct iproc_pll_aon_pwr_ctrl {
};
/*
- * Control of the PLL reset, with Ki, Kp, and Ka parameters
+ * Control of the PLL reset
*/
struct iproc_pll_reset_ctrl {
unsigned int offset;
unsigned int reset_shift;
unsigned int p_reset_shift;
+};
+
+/*
+ * Control of the Ki, Kp, and Ka parameters
+ */
+struct iproc_pll_dig_filter_ctrl {
+ unsigned int offset;
unsigned int ki_shift;
unsigned int ki_width;
unsigned int kp_shift;
@@ -123,6 +142,7 @@ struct iproc_pll_ctrl {
struct iproc_pll_aon_pwr_ctrl aon;
struct iproc_asiu_gate asiu;
struct iproc_pll_reset_ctrl reset;
+ struct iproc_pll_dig_filter_ctrl dig_filter;
struct iproc_pll_sw_ctrl sw_ctrl;
struct iproc_clk_reg_op ndiv_int;
struct iproc_clk_reg_op ndiv_frac;