diff options
Diffstat (limited to 'drivers/gpu/drm/ast/ast_drv.c')
| -rw-r--r-- | drivers/gpu/drm/ast/ast_drv.c | 263 |
1 files changed, 255 insertions, 8 deletions
diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c index cf5b754f044c..90bcb1eb9cd9 100644 --- a/drivers/gpu/drm/ast/ast_drv.c +++ b/drivers/gpu/drm/ast/ast_drv.c @@ -89,11 +89,194 @@ static const struct pci_device_id ast_pciidlist[] = { MODULE_DEVICE_TABLE(pci, ast_pciidlist); +static bool ast_is_vga_enabled(void __iomem *ioregs) +{ + u8 vgaer = __ast_read8(ioregs, AST_IO_VGAER); + + return vgaer & AST_IO_VGAER_VGA_ENABLE; +} + +static void ast_enable_vga(void __iomem *ioregs) +{ + __ast_write8(ioregs, AST_IO_VGAER, AST_IO_VGAER_VGA_ENABLE); + __ast_write8(ioregs, AST_IO_VGAMR_W, AST_IO_VGAMR_IOSEL); +} + +/* + * Run this function as part of the HW device cleanup; not + * when the DRM device gets released. + */ +static void ast_enable_mmio_release(void *data) +{ + void __iomem *ioregs = (void __force __iomem *)data; + + /* enable standard VGA decode */ + __ast_write8_i(ioregs, AST_IO_VGACRI, 0xa1, AST_IO_VGACRA1_MMIO_ENABLED); +} + +static int ast_enable_mmio(struct device *dev, void __iomem *ioregs) +{ + void *data = (void __force *)ioregs; + + __ast_write8_i(ioregs, AST_IO_VGACRI, 0xa1, + AST_IO_VGACRA1_MMIO_ENABLED | + AST_IO_VGACRA1_VGAIO_DISABLED); + + return devm_add_action_or_reset(dev, ast_enable_mmio_release, data); +} + +static void ast_open_key(void __iomem *ioregs) +{ + __ast_write8_i(ioregs, AST_IO_VGACRI, 0x80, AST_IO_VGACR80_PASSWORD); +} + +static int ast_detect_chip(struct pci_dev *pdev, + void __iomem *regs, void __iomem *ioregs, + enum ast_chip *chip_out, + enum ast_config_mode *config_mode_out) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + enum ast_config_mode config_mode = ast_use_defaults; + uint32_t scu_rev = 0xffffffff; + enum ast_chip chip; + u32 data; + u8 vgacrd0, vgacrd1; + + /* + * Find configuration mode and read SCU revision + */ + + /* Check if we have device-tree properties */ + if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", &data)) { + /* We do, disable P2A access */ + config_mode = ast_use_dt; + scu_rev = data; + } else if (pdev->device == PCI_CHIP_AST2000) { // Not all families have a P2A bridge + /* + * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge + * is disabled. We force using P2A if VGA only mode bit + * is set D[7] + */ + vgacrd0 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd0); + vgacrd1 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd1); + if (!(vgacrd0 & 0x80) || !(vgacrd1 & 0x10)) { + + /* + * We have a P2A bridge and it is enabled. + */ + + /* Patch AST2500/AST2510 */ + if ((pdev->revision & 0xf0) == 0x40) { + if (!(vgacrd0 & AST_VRAM_INIT_STATUS_MASK)) + ast_patch_ahb_2500(regs); + } + + /* Double check that it's actually working */ + data = __ast_read32(regs, 0xf004); + if ((data != 0xffffffff) && (data != 0x00)) { + config_mode = ast_use_p2a; + + /* Read SCU7c (silicon revision register) */ + __ast_write32(regs, 0xf004, 0x1e6e0000); + __ast_write32(regs, 0xf000, 0x1); + scu_rev = __ast_read32(regs, 0x1207c); + } + } + } + + switch (config_mode) { + case ast_use_defaults: + dev_info(dev, "Using default configuration\n"); + break; + case ast_use_dt: + dev_info(dev, "Using device-tree for configuration\n"); + break; + case ast_use_p2a: + dev_info(dev, "Using P2A bridge for configuration\n"); + break; + } + + /* + * Identify chipset + */ + + if (pdev->revision >= 0x50) { + chip = AST2600; + dev_info(dev, "AST 2600 detected\n"); + } else if (pdev->revision >= 0x40) { + switch (scu_rev & 0x300) { + case 0x0100: + chip = AST2510; + dev_info(dev, "AST 2510 detected\n"); + break; + default: + chip = AST2500; + dev_info(dev, "AST 2500 detected\n"); + break; + } + } else if (pdev->revision >= 0x30) { + switch (scu_rev & 0x300) { + case 0x0100: + chip = AST1400; + dev_info(dev, "AST 1400 detected\n"); + break; + default: + chip = AST2400; + dev_info(dev, "AST 2400 detected\n"); + break; + } + } else if (pdev->revision >= 0x20) { + switch (scu_rev & 0x300) { + case 0x0000: + chip = AST1300; + dev_info(dev, "AST 1300 detected\n"); + break; + default: + chip = AST2300; + dev_info(dev, "AST 2300 detected\n"); + break; + } + } else if (pdev->revision >= 0x10) { + switch (scu_rev & 0x0300) { + case 0x0200: + chip = AST1100; + dev_info(dev, "AST 1100 detected\n"); + break; + case 0x0100: + chip = AST2200; + dev_info(dev, "AST 2200 detected\n"); + break; + case 0x0000: + chip = AST2150; + dev_info(dev, "AST 2150 detected\n"); + break; + default: + chip = AST2100; + dev_info(dev, "AST 2100 detected\n"); + break; + } + } else { + chip = AST2000; + dev_info(dev, "AST 2000 detected\n"); + } + + *chip_out = chip; + *config_mode_out = config_mode; + + return 0; +} + static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { - struct ast_device *ast; - struct drm_device *dev; + struct device *dev = &pdev->dev; int ret; + void __iomem *regs; + void __iomem *ioregs; + enum ast_config_mode config_mode; + enum ast_chip chip; + struct drm_device *drm; + bool need_post = false; ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &ast_driver); if (ret) @@ -103,16 +286,80 @@ static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret) return ret; - ast = ast_device_create(&ast_driver, pdev, ent->driver_data); - if (IS_ERR(ast)) - return PTR_ERR(ast); - dev = &ast->base; + regs = pcim_iomap(pdev, 1, 0); + if (!regs) + return -EIO; + + if (pdev->revision >= 0x40) { + /* + * On AST2500 and later models, MMIO is enabled by + * default. Adopt it to be compatible with ARM. + */ + resource_size_t len = pci_resource_len(pdev, 1); + + if (len < AST_IO_MM_OFFSET) + return -EIO; + if ((len - AST_IO_MM_OFFSET) < AST_IO_MM_LENGTH) + return -EIO; + ioregs = regs + AST_IO_MM_OFFSET; + } else if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) { + /* + * Map I/O registers if we have a PCI BAR for I/O. + */ + resource_size_t len = pci_resource_len(pdev, 2); + + if (len < AST_IO_MM_LENGTH) + return -EIO; + ioregs = pcim_iomap(pdev, 2, 0); + if (!ioregs) + return -EIO; + } else { + /* + * Anything else is best effort. + */ + resource_size_t len = pci_resource_len(pdev, 1); + + if (len < AST_IO_MM_OFFSET) + return -EIO; + if ((len - AST_IO_MM_OFFSET) < AST_IO_MM_LENGTH) + return -EIO; + ioregs = regs + AST_IO_MM_OFFSET; + + dev_info(dev, "Platform has no I/O space, using MMIO\n"); + } + + if (!ast_is_vga_enabled(ioregs)) { + dev_info(dev, "VGA not enabled on entry, requesting chip POST\n"); + need_post = true; + } + + /* + * If VGA isn't enabled, we need to enable now or subsequent + * access to the scratch registers will fail. + */ + if (need_post) + ast_enable_vga(ioregs); + /* Enable extended register access */ + ast_open_key(ioregs); + + ret = ast_enable_mmio(dev, ioregs); + if (ret) + return ret; + + ret = ast_detect_chip(pdev, regs, ioregs, &chip, &config_mode); + if (ret) + return ret; + + drm = ast_device_create(pdev, &ast_driver, chip, config_mode, regs, ioregs, need_post); + if (IS_ERR(drm)) + return PTR_ERR(drm); + pci_set_drvdata(pdev, drm); - ret = drm_dev_register(dev, ent->driver_data); + ret = drm_dev_register(drm, ent->driver_data); if (ret) return ret; - drm_fbdev_generic_setup(dev, 32); + drm_fbdev_generic_setup(drm, 32); return 0; } |