diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/mdfld_device.c')
-rw-r--r-- | drivers/gpu/drm/gma500/mdfld_device.c | 562 |
1 files changed, 0 insertions, 562 deletions
diff --git a/drivers/gpu/drm/gma500/mdfld_device.c b/drivers/gpu/drm/gma500/mdfld_device.c deleted file mode 100644 index b83d59b21de5..000000000000 --- a/drivers/gpu/drm/gma500/mdfld_device.c +++ /dev/null @@ -1,562 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/************************************************************************** - * Copyright (c) 2011, Intel Corporation. - * All Rights Reserved. - * - **************************************************************************/ - -#include <linux/delay.h> -#include <linux/gpio/machine.h> - -#include <asm/intel_scu_ipc.h> - -#include "mdfld_dsi_output.h" -#include "mdfld_output.h" -#include "mid_bios.h" -#include "psb_drv.h" -#include "tc35876x-dsi-lvds.h" - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - -#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF -#define BLC_PWM_PRECISION_FACTOR 100 /* 10000000 */ -#define BLC_PWM_FREQ_CALC_CONSTANT 32 -#define MHz 1000000 -#define BRIGHTNESS_MIN_LEVEL 1 -#define BRIGHTNESS_MAX_LEVEL 100 -#define BRIGHTNESS_MASK 0xFF -#define BLC_POLARITY_NORMAL 0 -#define BLC_POLARITY_INVERSE 1 -#define BLC_ADJUSTMENT_MAX 100 - -#define MDFLD_BLC_PWM_PRECISION_FACTOR 10 -#define MDFLD_BLC_MAX_PWM_REG_FREQ 0xFFFE -#define MDFLD_BLC_MIN_PWM_REG_FREQ 0x2 - -#define MDFLD_BACKLIGHT_PWM_POLARITY_BIT_CLEAR (0xFFFE) -#define MDFLD_BACKLIGHT_PWM_CTL_SHIFT (16) - -static struct backlight_device *mdfld_backlight_device; - -int mdfld_set_brightness(struct backlight_device *bd) -{ - struct drm_device *dev = - (struct drm_device *)bl_get_data(mdfld_backlight_device); - struct drm_psb_private *dev_priv = dev->dev_private; - int level = bd->props.brightness; - - DRM_DEBUG_DRIVER("backlight level set to %d\n", level); - - /* Perform value bounds checking */ - if (level < BRIGHTNESS_MIN_LEVEL) - level = BRIGHTNESS_MIN_LEVEL; - - if (gma_power_begin(dev, false)) { - u32 adjusted_level = 0; - - /* - * Adjust the backlight level with the percent in - * dev_priv->blc_adj2 - */ - adjusted_level = level * dev_priv->blc_adj2; - adjusted_level = adjusted_level / BLC_ADJUSTMENT_MAX; - dev_priv->brightness_adjusted = adjusted_level; - - if (mdfld_get_panel_type(dev, 0) == TC35876X) { - if (dev_priv->dpi_panel_on[0] || - dev_priv->dpi_panel_on[2]) - tc35876x_brightness_control(dev, - dev_priv->brightness_adjusted); - } else { - if (dev_priv->dpi_panel_on[0]) - mdfld_dsi_brightness_control(dev, 0, - dev_priv->brightness_adjusted); - } - - if (dev_priv->dpi_panel_on[2]) - mdfld_dsi_brightness_control(dev, 2, - dev_priv->brightness_adjusted); - gma_power_end(dev); - } - - /* cache the brightness for later use */ - dev_priv->brightness = level; - return 0; -} - -static int mdfld_get_brightness(struct backlight_device *bd) -{ - struct drm_device *dev = - (struct drm_device *)bl_get_data(mdfld_backlight_device); - struct drm_psb_private *dev_priv = dev->dev_private; - - DRM_DEBUG_DRIVER("brightness = 0x%x \n", dev_priv->brightness); - - /* return locally cached var instead of HW read (due to DPST etc.) */ - return dev_priv->brightness; -} - -static const struct backlight_ops mdfld_ops = { - .get_brightness = mdfld_get_brightness, - .update_status = mdfld_set_brightness, -}; - -static int device_backlight_init(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = (struct drm_psb_private *) - dev->dev_private; - - dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX; - dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX; - - return 0; -} - -static int mdfld_backlight_init(struct drm_device *dev) -{ - struct backlight_properties props; - int ret = 0; - - memset(&props, 0, sizeof(struct backlight_properties)); - props.max_brightness = BRIGHTNESS_MAX_LEVEL; - props.type = BACKLIGHT_PLATFORM; - mdfld_backlight_device = backlight_device_register("mdfld-bl", - NULL, (void *)dev, &mdfld_ops, &props); - - if (IS_ERR(mdfld_backlight_device)) - return PTR_ERR(mdfld_backlight_device); - - ret = device_backlight_init(dev); - if (ret) - return ret; - - mdfld_backlight_device->props.brightness = BRIGHTNESS_MAX_LEVEL; - mdfld_backlight_device->props.max_brightness = BRIGHTNESS_MAX_LEVEL; - backlight_update_status(mdfld_backlight_device); - return 0; -} -#endif - -struct backlight_device *mdfld_get_backlight_device(void) -{ -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - return mdfld_backlight_device; -#else - return NULL; -#endif -} - -/* - * mdfld_save_display_registers - * - * Description: We are going to suspend so save current display - * register state. - * - * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio - */ -static int mdfld_save_display_registers(struct drm_device *dev, int pipenum) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - struct medfield_state *regs = &dev_priv->regs.mdfld; - struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum]; - const struct psb_offset *map = &dev_priv->regmap[pipenum]; - int i; - u32 *mipi_val; - - /* register */ - u32 mipi_reg = MIPI; - - switch (pipenum) { - case 0: - mipi_val = ®s->saveMIPI; - break; - case 1: - mipi_val = ®s->saveMIPI; - break; - case 2: - /* register */ - mipi_reg = MIPI_C; - /* pointer to values */ - mipi_val = ®s->saveMIPI_C; - break; - default: - DRM_ERROR("%s, invalid pipe number.\n", __func__); - return -EINVAL; - } - - /* Pipe & plane A info */ - pipe->dpll = PSB_RVDC32(map->dpll); - pipe->fp0 = PSB_RVDC32(map->fp0); - pipe->conf = PSB_RVDC32(map->conf); - pipe->htotal = PSB_RVDC32(map->htotal); - pipe->hblank = PSB_RVDC32(map->hblank); - pipe->hsync = PSB_RVDC32(map->hsync); - pipe->vtotal = PSB_RVDC32(map->vtotal); - pipe->vblank = PSB_RVDC32(map->vblank); - pipe->vsync = PSB_RVDC32(map->vsync); - pipe->src = PSB_RVDC32(map->src); - pipe->stride = PSB_RVDC32(map->stride); - pipe->linoff = PSB_RVDC32(map->linoff); - pipe->tileoff = PSB_RVDC32(map->tileoff); - pipe->size = PSB_RVDC32(map->size); - pipe->pos = PSB_RVDC32(map->pos); - pipe->surf = PSB_RVDC32(map->surf); - pipe->cntr = PSB_RVDC32(map->cntr); - pipe->status = PSB_RVDC32(map->status); - - /*save palette (gamma) */ - for (i = 0; i < 256; i++) - pipe->palette[i] = PSB_RVDC32(map->palette + (i << 2)); - - if (pipenum == 1) { - regs->savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL); - regs->savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS); - - regs->saveHDMIPHYMISCCTL = PSB_RVDC32(HDMIPHYMISCCTL); - regs->saveHDMIB_CONTROL = PSB_RVDC32(HDMIB_CONTROL); - return 0; - } - - *mipi_val = PSB_RVDC32(mipi_reg); - return 0; -} - -/* - * mdfld_restore_display_registers - * - * Description: We are going to resume so restore display register state. - * - * Notes: FIXME_JLIU7 need to add the support for DPI MIPI & HDMI audio - */ -static int mdfld_restore_display_registers(struct drm_device *dev, int pipenum) -{ - /* To get panel out of ULPS mode. */ - u32 temp = 0; - u32 device_ready_reg = DEVICE_READY_REG; - struct drm_psb_private *dev_priv = dev->dev_private; - struct mdfld_dsi_config *dsi_config = NULL; - struct medfield_state *regs = &dev_priv->regs.mdfld; - struct psb_pipe *pipe = &dev_priv->regs.pipe[pipenum]; - const struct psb_offset *map = &dev_priv->regmap[pipenum]; - u32 i; - u32 dpll; - u32 timeout = 0; - - /* register */ - u32 mipi_reg = MIPI; - - /* values */ - u32 dpll_val = pipe->dpll; - u32 mipi_val = regs->saveMIPI; - - switch (pipenum) { - case 0: - dpll_val &= ~DPLL_VCO_ENABLE; - dsi_config = dev_priv->dsi_configs[0]; - break; - case 1: - dpll_val &= ~DPLL_VCO_ENABLE; - break; - case 2: - mipi_reg = MIPI_C; - mipi_val = regs->saveMIPI_C; - dsi_config = dev_priv->dsi_configs[1]; - break; - default: - DRM_ERROR("%s, invalid pipe number.\n", __func__); - return -EINVAL; - } - - /*make sure VGA plane is off. it initializes to on after reset!*/ - PSB_WVDC32(0x80000000, VGACNTRL); - - if (pipenum == 1) { - PSB_WVDC32(dpll_val & ~DPLL_VCO_ENABLE, map->dpll); - PSB_RVDC32(map->dpll); - - PSB_WVDC32(pipe->fp0, map->fp0); - } else { - - dpll = PSB_RVDC32(map->dpll); - - if (!(dpll & DPLL_VCO_ENABLE)) { - - /* When ungating power of DPLL, needs to wait 0.5us - before enable the VCO */ - if (dpll & MDFLD_PWR_GATE_EN) { - dpll &= ~MDFLD_PWR_GATE_EN; - PSB_WVDC32(dpll, map->dpll); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - } - - PSB_WVDC32(pipe->fp0, map->fp0); - PSB_WVDC32(dpll_val, map->dpll); - /* FIXME_MDFLD PO - change 500 to 1 after PO */ - udelay(500); - - dpll_val |= DPLL_VCO_ENABLE; - PSB_WVDC32(dpll_val, map->dpll); - PSB_RVDC32(map->dpll); - - /* wait for DSI PLL to lock */ - while (timeout < 20000 && - !(PSB_RVDC32(map->conf) & PIPECONF_DSIPLL_LOCK)) { - udelay(150); - timeout++; - } - - if (timeout == 20000) { - DRM_ERROR("%s, can't lock DSIPLL.\n", - __func__); - return -EINVAL; - } - } - } - /* Restore mode */ - PSB_WVDC32(pipe->htotal, map->htotal); - PSB_WVDC32(pipe->hblank, map->hblank); - PSB_WVDC32(pipe->hsync, map->hsync); - PSB_WVDC32(pipe->vtotal, map->vtotal); - PSB_WVDC32(pipe->vblank, map->vblank); - PSB_WVDC32(pipe->vsync, map->vsync); - PSB_WVDC32(pipe->src, map->src); - PSB_WVDC32(pipe->status, map->status); - - /*set up the plane*/ - PSB_WVDC32(pipe->stride, map->stride); - PSB_WVDC32(pipe->linoff, map->linoff); - PSB_WVDC32(pipe->tileoff, map->tileoff); - PSB_WVDC32(pipe->size, map->size); - PSB_WVDC32(pipe->pos, map->pos); - PSB_WVDC32(pipe->surf, map->surf); - - if (pipenum == 1) { - /* restore palette (gamma) */ - /* udelay(50000); */ - for (i = 0; i < 256; i++) - PSB_WVDC32(pipe->palette[i], map->palette + (i << 2)); - - PSB_WVDC32(regs->savePFIT_CONTROL, PFIT_CONTROL); - PSB_WVDC32(regs->savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS); - - /*TODO: resume HDMI port */ - - /*TODO: resume pipe*/ - - /*enable the plane*/ - PSB_WVDC32(pipe->cntr & ~DISPLAY_PLANE_ENABLE, map->cntr); - - return 0; - } - - /*set up pipe related registers*/ - PSB_WVDC32(mipi_val, mipi_reg); - - /*setup MIPI adapter + MIPI IP registers*/ - if (dsi_config) - mdfld_dsi_controller_init(dsi_config, pipenum); - - if (in_atomic() || in_interrupt()) - mdelay(20); - else - msleep(20); - - /*enable the plane*/ - PSB_WVDC32(pipe->cntr, map->cntr); - - if (in_atomic() || in_interrupt()) - mdelay(20); - else - msleep(20); - - /* LP Hold Release */ - temp = REG_READ(mipi_reg); - temp |= LP_OUTPUT_HOLD_RELEASE; - REG_WRITE(mipi_reg, temp); - mdelay(1); - - - /* Set DSI host to exit from Utra Low Power State */ - temp = REG_READ(device_ready_reg); - temp &= ~ULPS_MASK; - temp |= 0x3; - temp |= EXIT_ULPS_DEV_READY; - REG_WRITE(device_ready_reg, temp); - mdelay(1); - - temp = REG_READ(device_ready_reg); - temp &= ~ULPS_MASK; - temp |= EXITING_ULPS; - REG_WRITE(device_ready_reg, temp); - mdelay(1); - - /*enable the pipe*/ - PSB_WVDC32(pipe->conf, map->conf); - - /* restore palette (gamma) */ - /* udelay(50000); */ - for (i = 0; i < 256; i++) - PSB_WVDC32(pipe->palette[i], map->palette + (i << 2)); - - return 0; -} - -static int mdfld_save_registers(struct drm_device *dev) -{ - /* mdfld_save_cursor_overlay_registers(dev); */ - mdfld_save_display_registers(dev, 0); - mdfld_save_display_registers(dev, 2); - mdfld_disable_crtc(dev, 0); - mdfld_disable_crtc(dev, 2); - - return 0; -} - -static int mdfld_restore_registers(struct drm_device *dev) -{ - mdfld_restore_display_registers(dev, 2); - mdfld_restore_display_registers(dev, 0); - /* mdfld_restore_cursor_overlay_registers(dev); */ - - return 0; -} - -static int mdfld_power_down(struct drm_device *dev) -{ - /* FIXME */ - return 0; -} - -static int mdfld_power_up(struct drm_device *dev) -{ - /* FIXME */ - return 0; -} - -/* Medfield */ -static const struct psb_offset mdfld_regmap[3] = { - { - .fp0 = MRST_FPA0, - .fp1 = MRST_FPA1, - .cntr = DSPACNTR, - .conf = PIPEACONF, - .src = PIPEASRC, - .dpll = MRST_DPLL_A, - .htotal = HTOTAL_A, - .hblank = HBLANK_A, - .hsync = HSYNC_A, - .vtotal = VTOTAL_A, - .vblank = VBLANK_A, - .vsync = VSYNC_A, - .stride = DSPASTRIDE, - .size = DSPASIZE, - .pos = DSPAPOS, - .surf = DSPASURF, - .addr = MRST_DSPABASE, - .status = PIPEASTAT, - .linoff = DSPALINOFF, - .tileoff = DSPATILEOFF, - .palette = PALETTE_A, - }, - { - .fp0 = MDFLD_DPLL_DIV0, - .cntr = DSPBCNTR, - .conf = PIPEBCONF, - .src = PIPEBSRC, - .dpll = MDFLD_DPLL_B, - .htotal = HTOTAL_B, - .hblank = HBLANK_B, - .hsync = HSYNC_B, - .vtotal = VTOTAL_B, - .vblank = VBLANK_B, - .vsync = VSYNC_B, - .stride = DSPBSTRIDE, - .size = DSPBSIZE, - .pos = DSPBPOS, - .surf = DSPBSURF, - .addr = MRST_DSPBBASE, - .status = PIPEBSTAT, - .linoff = DSPBLINOFF, - .tileoff = DSPBTILEOFF, - .palette = PALETTE_B, - }, - { - .fp0 = MRST_FPA0, /* This is what the old code did ?? */ - .cntr = DSPCCNTR, - .conf = PIPECCONF, - .src = PIPECSRC, - /* No DPLL_C */ - .dpll = MRST_DPLL_A, - .htotal = HTOTAL_C, - .hblank = HBLANK_C, - .hsync = HSYNC_C, - .vtotal = VTOTAL_C, - .vblank = VBLANK_C, - .vsync = VSYNC_C, - .stride = DSPCSTRIDE, - .size = DSPBSIZE, - .pos = DSPCPOS, - .surf = DSPCSURF, - .addr = MDFLD_DSPCBASE, - .status = PIPECSTAT, - .linoff = DSPCLINOFF, - .tileoff = DSPCTILEOFF, - .palette = PALETTE_C, - }, -}; - -/* - * The GPIO lines for resetting DSI pipe 0 and 2 are available in the - * PCI device 0000:00:0c.0 on the Medfield. - */ -static struct gpiod_lookup_table mdfld_dsi_pipe_gpio_table = { - .table = { - GPIO_LOOKUP("0000:00:0c.0", 128, "dsi-pipe0-reset", - GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("0000:00:0c.0", 34, "dsi-pipe2-reset", - GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static int mdfld_chip_setup(struct drm_device *dev) -{ - struct drm_psb_private *dev_priv = dev->dev_private; - if (pci_enable_msi(dev->pdev)) - dev_warn(dev->dev, "Enabling MSI failed!\n"); - dev_priv->regmap = mdfld_regmap; - - /* Associate the GPIO lines with the DRM device */ - mdfld_dsi_pipe_gpio_table.dev_id = dev_name(dev->dev); - gpiod_add_lookup_table(&mdfld_dsi_pipe_gpio_table); - - return mid_chip_setup(dev); -} - -const struct psb_ops mdfld_chip_ops = { - .name = "mdfld", - .pipes = 3, - .crtcs = 3, - .lvds_mask = (1 << 1), - .hdmi_mask = (1 << 1), - .cursor_needs_phys = 0, - .sgx_offset = MRST_SGX_OFFSET, - - .chip_setup = mdfld_chip_setup, - .crtc_helper = &mdfld_helper_funcs, - .crtc_funcs = &psb_intel_crtc_funcs, - - .output_init = mdfld_output_init, - -#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE - .backlight_init = mdfld_backlight_init, -#endif - - .save_regs = mdfld_save_registers, - .restore_regs = mdfld_restore_registers, - .save_crtc = gma_crtc_save, - .restore_crtc = gma_crtc_restore, - .power_down = mdfld_power_down, - .power_up = mdfld_power_up, -}; |