diff options
Diffstat (limited to 'drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c')
| -rw-r--r-- | drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c index 4c1bf55c5f38..ceec7bb87bf1 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c @@ -37,6 +37,7 @@ /* v2.0.0 28nm LP implementation */ #define DSI_PHY_28NM_QUIRK_PHY_LP BIT(0) +#define DSI_PHY_28NM_QUIRK_PHY_8226 BIT(1) #define LPFR_LUT_SIZE 10 struct lpfr_cfg { @@ -377,6 +378,74 @@ static int dsi_pll_28nm_vco_prepare_hpm(struct clk_hw *hw) return ret; } +static int dsi_pll_28nm_vco_prepare_8226(struct clk_hw *hw) +{ + struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); + struct device *dev = &pll_28nm->phy->pdev->dev; + void __iomem *base = pll_28nm->phy->pll_base; + u32 max_reads = 5, timeout_us = 100; + bool locked; + u32 val; + int i; + + DBG("id=%d", pll_28nm->phy->id); + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_CAL_CFG1, 0x34); + + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 200); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); + + for (i = 0; i < 7; i++) { + /* DSI Uniphy lock detect setting */ + dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); + dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, + 0x0c, 100); + dsi_phy_write(base + REG_DSI_28nm_PHY_PLL_LKDET_CFG2, 0x0d); + + /* poll for PLL ready status */ + locked = pll_28nm_poll_for_ready(pll_28nm, + max_reads, timeout_us); + if (locked) + break; + + pll_28nm_software_reset(pll_28nm); + + /* + * PLL power up sequence. + * Add necessary delays recommended by hardware. + */ + dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_PWRGEN_CFG, 0x00, 50); + + val = DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRDN_B; + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_PWRGEN_PWRDN_B; + dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 100); + + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_LDO_PWRDN_B; + val |= DSI_28nm_PHY_PLL_GLB_CFG_PLL_ENABLE; + dsi_phy_write_udelay(base + REG_DSI_28nm_PHY_PLL_GLB_CFG, val, 600); + } + + if (unlikely(!locked)) + DRM_DEV_ERROR(dev, "DSI PLL lock failed\n"); + else + DBG("DSI PLL Lock success"); + + return locked ? 0 : -EINVAL; +} + static int dsi_pll_28nm_vco_prepare_lp(struct clk_hw *hw) { struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw); @@ -471,6 +540,15 @@ static const struct clk_ops clk_ops_dsi_pll_28nm_vco_lp = { .is_enabled = dsi_pll_28nm_clk_is_enabled, }; +static const struct clk_ops clk_ops_dsi_pll_28nm_vco_8226 = { + .round_rate = dsi_pll_28nm_clk_round_rate, + .set_rate = dsi_pll_28nm_clk_set_rate, + .recalc_rate = dsi_pll_28nm_clk_recalc_rate, + .prepare = dsi_pll_28nm_vco_prepare_8226, + .unprepare = dsi_pll_28nm_vco_unprepare, + .is_enabled = dsi_pll_28nm_clk_is_enabled, +}; + /* * PLL Callbacks */ @@ -536,6 +614,8 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_LP) vco_init.ops = &clk_ops_dsi_pll_28nm_vco_lp; + else if (pll_28nm->phy->cfg->quirks & DSI_PHY_28NM_QUIRK_PHY_8226) + vco_init.ops = &clk_ops_dsi_pll_28nm_vco_8226; else vco_init.ops = &clk_ops_dsi_pll_28nm_vco_hpm; @@ -820,3 +900,20 @@ const struct msm_dsi_phy_cfg dsi_phy_28nm_lp_cfgs = { .quirks = DSI_PHY_28NM_QUIRK_PHY_LP, }; +const struct msm_dsi_phy_cfg dsi_phy_28nm_8226_cfgs = { + .has_phy_regulator = true, + .regulator_data = dsi_phy_28nm_regulators, + .num_regulators = ARRAY_SIZE(dsi_phy_28nm_regulators), + .ops = { + .enable = dsi_28nm_phy_enable, + .disable = dsi_28nm_phy_disable, + .pll_init = dsi_pll_28nm_init, + .save_pll_state = dsi_28nm_pll_save_state, + .restore_pll_state = dsi_28nm_pll_restore_state, + }, + .min_pll_rate = VCO_MIN_RATE, + .max_pll_rate = VCO_MAX_RATE, + .io_start = { 0xfd922b00 }, + .num_dsi_phy = 1, + .quirks = DSI_PHY_28NM_QUIRK_PHY_8226, +}; |