diff options
Diffstat (limited to 'drivers/iommu/Kconfig')
| -rw-r--r-- | drivers/iommu/Kconfig | 145 |
1 files changed, 4 insertions, 141 deletions
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index b0f308cb7f7c..49fd9d7e14bf 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -128,139 +128,8 @@ config MSM_IOMMU If unsure, say N here. -config IOMMU_PGTABLES_L2 - def_bool y - depends on MSM_IOMMU && MMU && SMP && CPU_DCACHE_DISABLE=n - -# AMD IOMMU support -config AMD_IOMMU - bool "AMD IOMMU support" - select SWIOTLB - select PCI_MSI - select PCI_ATS - select PCI_PRI - select PCI_PASID - select IOMMU_API - select IOMMU_IOVA - select IOMMU_DMA - depends on X86_64 && PCI && ACPI - help - With this option you can enable support for AMD IOMMU hardware in - your system. An IOMMU is a hardware component which provides - remapping of DMA memory accesses from devices. With an AMD IOMMU you - can isolate the DMA memory of different devices and protect the - system from misbehaving device drivers or hardware. - - You can find out if your system has an AMD IOMMU if you look into - your BIOS for an option to enable it or if you have an IVRS ACPI - table. - -config AMD_IOMMU_V2 - tristate "AMD IOMMU Version 2 driver" - depends on AMD_IOMMU - select MMU_NOTIFIER - help - This option enables support for the AMD IOMMUv2 features of the IOMMU - hardware. Select this option if you want to use devices that support - the PCI PRI and PASID interface. - -config AMD_IOMMU_DEBUGFS - bool "Enable AMD IOMMU internals in DebugFS" - depends on AMD_IOMMU && IOMMU_DEBUGFS - help - !!!WARNING!!! !!!WARNING!!! !!!WARNING!!! !!!WARNING!!! - - DO NOT ENABLE THIS OPTION UNLESS YOU REALLY, -REALLY- KNOW WHAT YOU ARE DOING!!! - Exposes AMD IOMMU device internals in DebugFS. - - This option is -NOT- intended for production environments, and should - not generally be enabled. - -# Intel IOMMU support -config DMAR_TABLE - bool - -config INTEL_IOMMU - bool "Support for Intel IOMMU using DMA Remapping Devices" - depends on PCI_MSI && ACPI && (X86 || IA64) - select IOMMU_API - select IOMMU_IOVA - select NEED_DMA_MAP_STATE - select DMAR_TABLE - select SWIOTLB - select IOASID - help - DMA remapping (DMAR) devices support enables independent address - translations for Direct Memory Access (DMA) from devices. - These DMA remapping devices are reported via ACPI tables - and include PCI device scope covered by these DMA - remapping devices. - -config INTEL_IOMMU_DEBUGFS - bool "Export Intel IOMMU internals in Debugfs" - depends on INTEL_IOMMU && IOMMU_DEBUGFS - help - !!!WARNING!!! - - DO NOT ENABLE THIS OPTION UNLESS YOU REALLY KNOW WHAT YOU ARE DOING!!! - - Expose Intel IOMMU internals in Debugfs. - - This option is -NOT- intended for production environments, and should - only be enabled for debugging Intel IOMMU. - -config INTEL_IOMMU_SVM - bool "Support for Shared Virtual Memory with Intel IOMMU" - depends on INTEL_IOMMU && X86_64 - select PCI_PASID - select PCI_PRI - select MMU_NOTIFIER - select IOASID - help - Shared Virtual Memory (SVM) provides a facility for devices - to access DMA resources through process address space by - means of a Process Address Space ID (PASID). - -config INTEL_IOMMU_DEFAULT_ON - def_bool y - prompt "Enable Intel DMA Remapping Devices by default" - depends on INTEL_IOMMU - help - Selecting this option will enable a DMAR device at boot time if - one is found. If this option is not selected, DMAR support can - be enabled by passing intel_iommu=on to the kernel. - -config INTEL_IOMMU_BROKEN_GFX_WA - bool "Workaround broken graphics drivers (going away soon)" - depends on INTEL_IOMMU && BROKEN && X86 - help - Current Graphics drivers tend to use physical address - for DMA and avoid using DMA APIs. Setting this config - option permits the IOMMU driver to set a unity map for - all the OS-visible memory. Hence the driver can continue - to use physical addresses for DMA, at least until this - option is removed in the 2.6.32 kernel. - -config INTEL_IOMMU_FLOPPY_WA - def_bool y - depends on INTEL_IOMMU && X86 - help - Floppy disk drivers are known to bypass DMA API calls - thereby failing to work when IOMMU is enabled. This - workaround will setup a 1:1 mapping for the first - 16MiB to make floppy (an ISA device) work. - -config INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON - bool "Enable Intel IOMMU scalable mode by default" - depends on INTEL_IOMMU - help - Selecting this option will enable by default the scalable mode if - hardware presents the capability. The scalable mode is defined in - VT-d 3.0. The scalable mode capability could be checked by reading - /sys/devices/virtual/iommu/dmar*/intel-iommu/ecap. If this option - is not selected, scalable mode support could also be enabled by - passing intel_iommu=sm_on to the kernel. If not sure, please use - the default value. +source "drivers/iommu/amd/Kconfig" +source "drivers/iommu/intel/Kconfig" config IRQ_REMAP bool "Support for Interrupt Remapping" @@ -274,7 +143,6 @@ config IRQ_REMAP # OMAP IOMMU support config OMAP_IOMMU bool "OMAP IOMMU Support" - depends on ARM && MMU || (COMPILE_TEST && (ARM || ARM64 || IA64 || SPARC)) depends on ARCH_OMAP2PLUS || COMPILE_TEST select IOMMU_API help @@ -292,7 +160,6 @@ config OMAP_IOMMU_DEBUG config ROCKCHIP_IOMMU bool "Rockchip IOMMU Support" - depends on ARM || ARM64 || (COMPILE_TEST && (ARM64 || IA64 || SPARC)) depends on ARCH_ROCKCHIP || COMPILE_TEST select IOMMU_API select ARM_DMA_USE_IOMMU @@ -309,7 +176,6 @@ config SUN50I_IOMMU depends on ARCH_SUNXI || COMPILE_TEST select ARM_DMA_USE_IOMMU select IOMMU_API - select IOMMU_DMA help Support for the IOMMU introduced in the Allwinner H6 SoCs. @@ -336,7 +202,7 @@ config TEGRA_IOMMU_SMMU config EXYNOS_IOMMU bool "Exynos IOMMU Support" - depends on ARCH_EXYNOS && MMU || (COMPILE_TEST && (ARM || ARM64 || IA64 || SPARC)) + depends on ARCH_EXYNOS || COMPILE_TEST depends on !CPU_BIG_ENDIAN # revisit driver if we can enable big-endian ptes select IOMMU_API select ARM_DMA_USE_IOMMU @@ -359,7 +225,6 @@ config EXYNOS_IOMMU_DEBUG config IPMMU_VMSA bool "Renesas VMSA-compatible IPMMU" - depends on ARM || IOMMU_DMA depends on ARCH_RENESAS || (COMPILE_TEST && !GENERIC_ATOMIC64) select IOMMU_API select IOMMU_IO_PGTABLE_LPAE @@ -381,7 +246,7 @@ config SPAPR_TCE_IOMMU # ARM IOMMU support config ARM_SMMU tristate "ARM Ltd. System MMU (SMMU) Support" - depends on (ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64)) && MMU + depends on ARM64 || ARM || (COMPILE_TEST && !GENERIC_ATOMIC64) select IOMMU_API select IOMMU_IO_PGTABLE_LPAE select ARM_DMA_USE_IOMMU if ARM @@ -467,11 +332,9 @@ config S390_AP_IOMMU config MTK_IOMMU bool "MTK IOMMU Support" - depends on HAS_DMA depends on ARCH_MEDIATEK || COMPILE_TEST select ARM_DMA_USE_IOMMU select IOMMU_API - select IOMMU_DMA select IOMMU_IO_PGTABLE_ARMV7S select MEMORY select MTK_SMI |