summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb3/sge.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb3/sge.c')
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/sge.c91
1 files changed, 50 insertions, 41 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index 6dabbf1502c7..e18e9ce27f94 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -372,7 +372,7 @@ static void clear_rx_desc(struct pci_dev *pdev, const struct sge_fl *q,
/**
* free_rx_bufs - free the Rx buffers on an SGE free list
* @pdev: the PCI device associated with the adapter
- * @rxq: the SGE free list to clean up
+ * @q: the SGE free list to clean up
*
* Release the buffers on an SGE free-buffer Rx queue. HW fetching from
* this queue should be stopped before calling this function.
@@ -493,7 +493,7 @@ static inline void ring_fl_db(struct adapter *adap, struct sge_fl *q)
/**
* refill_fl - refill an SGE free-buffer list
- * @adapter: the adapter
+ * @adap: the adapter
* @q: the free-list to refill
* @n: the number of new buffers to allocate
* @gfp: the gfp flags for allocating new buffers
@@ -568,7 +568,7 @@ static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
/**
* recycle_rx_buf - recycle a receive buffer
- * @adapter: the adapter
+ * @adap: the adapter
* @q: the SGE free list
* @idx: index of buffer to recycle
*
@@ -825,6 +825,7 @@ use_orig_buf:
* get_packet_pg - return the next ingress packet buffer from a free list
* @adap: the adapter that received the packet
* @fl: the SGE free list holding the packet
+ * @q: the queue
* @len: the packet length including any SGE padding
* @drop_thres: # of remaining buffers before we start dropping packets
*
@@ -1173,6 +1174,7 @@ static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
* @q: the Tx queue
* @ndesc: number of descriptors the packet will occupy
* @compl: the value of the COMPL bit to use
+ * @addr: address
*
* Generate a TX_PKT work request to send the supplied packet.
*/
@@ -1516,14 +1518,14 @@ static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
/**
* restart_ctrlq - restart a suspended control queue
- * @qs: the queue set cotaining the control queue
+ * @t: pointer to the tasklet associated with this handler
*
* Resumes transmission on a suspended Tx control queue.
*/
-static void restart_ctrlq(unsigned long data)
+static void restart_ctrlq(struct tasklet_struct *t)
{
struct sk_buff *skb;
- struct sge_qset *qs = (struct sge_qset *)data;
+ struct sge_qset *qs = from_tasklet(qs, t, txq[TXQ_CTRL].qresume_tsk);
struct sge_txq *q = &qs->txq[TXQ_CTRL];
spin_lock(&q->lock);
@@ -1622,6 +1624,7 @@ static void setup_deferred_unmapping(struct sk_buff *skb, struct pci_dev *pdev,
* @pidx: index of the first Tx descriptor to write
* @gen: the generation value to use
* @ndesc: number of descriptors the packet will occupy
+ * @addr: the address
*
* Write an offload work request to send the supplied packet. The packet
* data already carry the work request with most fields populated.
@@ -1733,14 +1736,14 @@ again: reclaim_completed_tx(adap, q, TX_RECLAIM_CHUNK);
/**
* restart_offloadq - restart a suspended offload queue
- * @qs: the queue set cotaining the offload queue
+ * @t: pointer to the tasklet associated with this handler
*
* Resumes transmission on a suspended Tx offload queue.
*/
-static void restart_offloadq(unsigned long data)
+static void restart_offloadq(struct tasklet_struct *t)
{
struct sk_buff *skb;
- struct sge_qset *qs = (struct sge_qset *)data;
+ struct sge_qset *qs = from_tasklet(qs, t, txq[TXQ_OFLD].qresume_tsk);
struct sge_txq *q = &qs->txq[TXQ_OFLD];
const struct port_info *pi = netdev_priv(qs->netdev);
struct adapter *adap = pi->adapter;
@@ -1883,7 +1886,7 @@ static inline void deliver_partial_bundle(struct t3cdev *tdev,
/**
* ofld_poll - NAPI handler for offload packets in interrupt mode
- * @dev: the network device doing the polling
+ * @napi: the network device doing the polling
* @budget: polling budget
*
* The NAPI handler for offload packets when a response queue is serviced
@@ -2007,7 +2010,7 @@ static void restart_tx(struct sge_qset *qs)
/**
* cxgb3_arp_process - process an ARP request probing a private IP address
- * @adapter: the adapter
+ * @pi: the port info
* @skb: the skbuff containing the ARP request
*
* Check if the ARP request is probing the private IP address
@@ -2069,7 +2072,8 @@ static void cxgb3_process_iscsi_prov_pack(struct port_info *pi,
* @adap: the adapter
* @rq: the response queue that received the packet
* @skb: the packet
- * @pad: amount of padding at the start of the buffer
+ * @pad: padding
+ * @lro: large receive offload
*
* Process an ingress ethernet pakcet and deliver it to the stack.
* The padding is 2 if the packet was delivered in an Rx buffer and 0
@@ -2239,7 +2243,7 @@ static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
/**
* check_ring_db - check if we need to ring any doorbells
- * @adapter: the adapter
+ * @adap: the adapter
* @qs: the queue set whose Tx queues are to be examined
* @sleeping: indicates which Tx queue sent GTS
*
@@ -2372,10 +2376,7 @@ no_mem:
if (fl->use_pages) {
void *addr = fl->sdesc[fl->cidx].pg_chunk.va;
- prefetch(addr);
-#if L1_CACHE_BYTES < 128
- prefetch(addr + L1_CACHE_BYTES);
-#endif
+ net_prefetch(addr);
__refill_fl(adap, fl);
if (lro > 0) {
lro_add_page(adap, qs, fl,
@@ -2902,7 +2903,7 @@ void t3_sge_err_intr_handler(struct adapter *adapter)
/**
* sge_timer_tx - perform periodic maintenance of an SGE qset
- * @data: the SGE queue set to maintain
+ * @t: a timer list containing the SGE queue set to maintain
*
* Runs periodically from a timer to perform maintenance of an SGE queue
* set. It performs two tasks:
@@ -2946,7 +2947,7 @@ static void sge_timer_tx(struct timer_list *t)
/**
* sge_timer_rx - perform periodic maintenance of an SGE qset
- * @data: the SGE queue set to maintain
+ * @t: the timer list containing the SGE queue set to maintain
*
* a) Replenishes Rx queues that have run out due to memory shortage.
* Normally new Rx buffers are added when existing ones are consumed but
@@ -3024,7 +3025,7 @@ void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
* @irq_vec_idx: the IRQ vector index for response queue interrupts
* @p: configuration parameters for this queue set
* @ntxq: number of Tx queues for the queue set
- * @netdev: net device associated with this queue set
+ * @dev: net device associated with this queue set
* @netdevq: net device TX queue associated with this queue set
*
* Allocate resources and initialize an SGE queue set. A queue set
@@ -3084,10 +3085,8 @@ int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
skb_queue_head_init(&q->txq[i].sendq);
}
- tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
- (unsigned long)q);
- tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
- (unsigned long)q);
+ tasklet_setup(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq);
+ tasklet_setup(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq);
q->fl[0].gen = q->fl[1].gen = 1;
q->fl[0].size = p->fl_size;
@@ -3271,30 +3270,40 @@ void t3_sge_start(struct adapter *adap)
}
/**
- * t3_sge_stop - disable SGE operation
+ * t3_sge_stop_dma - Disable SGE DMA engine operation
* @adap: the adapter
*
- * Disables the DMA engine. This can be called in emeregencies (e.g.,
- * from error interrupts) or from normal process context. In the latter
- * case it also disables any pending queue restart tasklets. Note that
- * if it is called in interrupt context it cannot disable the restart
- * tasklets as it cannot wait, however the tasklets will have no effect
- * since the doorbells are disabled and the driver will call this again
- * later from process context, at which time the tasklets will be stopped
- * if they are still running.
+ * Can be invoked from interrupt context e.g. error handler.
+ *
+ * Note that this function cannot disable the restart of tasklets as
+ * it cannot wait if called from interrupt context, however the
+ * tasklets will have no effect since the doorbells are disabled. The
+ * driver will call tg3_sge_stop() later from process context, at
+ * which time the tasklets will be stopped if they are still running.
*/
-void t3_sge_stop(struct adapter *adap)
+void t3_sge_stop_dma(struct adapter *adap)
{
t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
- if (!in_interrupt()) {
- int i;
+}
- for (i = 0; i < SGE_QSETS; ++i) {
- struct sge_qset *qs = &adap->sge.qs[i];
+/**
+ * t3_sge_stop - disable SGE operation completly
+ * @adap: the adapter
+ *
+ * Called from process context. Disables the DMA engine and any
+ * pending queue restart tasklets.
+ */
+void t3_sge_stop(struct adapter *adap)
+{
+ int i;
- tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
- tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
- }
+ t3_sge_stop_dma(adap);
+
+ for (i = 0; i < SGE_QSETS; ++i) {
+ struct sge_qset *qs = &adap->sge.qs[i];
+
+ tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
+ tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
}
}