summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/chelsio/cxgb3/t3_hw.c')
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/t3_hw.c98
1 files changed, 16 insertions, 82 deletions
diff --git a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
index 53feac8da503..da41eee2f25c 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/t3_hw.c
@@ -596,81 +596,10 @@ struct t3_vpd {
u32 pad; /* for multiple-of-4 sizing and alignment */
};
-#define EEPROM_MAX_POLL 40
#define EEPROM_STAT_ADDR 0x4000
#define VPD_BASE 0xc00
/**
- * t3_seeprom_read - read a VPD EEPROM location
- * @adapter: adapter to read
- * @addr: EEPROM address
- * @data: where to store the read data
- *
- * Read a 32-bit word from a location in VPD EEPROM using the card's PCI
- * VPD ROM capability. A zero is written to the flag bit when the
- * address is written to the control register. The hardware device will
- * set the flag to 1 when 4 bytes have been read into the data register.
- */
-int t3_seeprom_read(struct adapter *adapter, u32 addr, __le32 *data)
-{
- u16 val;
- int attempts = EEPROM_MAX_POLL;
- u32 v;
- unsigned int base = adapter->params.pci.vpd_cap_addr;
-
- if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
- return -EINVAL;
-
- pci_write_config_word(adapter->pdev, base + PCI_VPD_ADDR, addr);
- do {
- udelay(10);
- pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val);
- } while (!(val & PCI_VPD_ADDR_F) && --attempts);
-
- if (!(val & PCI_VPD_ADDR_F)) {
- CH_ERR(adapter, "reading EEPROM address 0x%x failed\n", addr);
- return -EIO;
- }
- pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, &v);
- *data = cpu_to_le32(v);
- return 0;
-}
-
-/**
- * t3_seeprom_write - write a VPD EEPROM location
- * @adapter: adapter to write
- * @addr: EEPROM address
- * @data: value to write
- *
- * Write a 32-bit word to a location in VPD EEPROM using the card's PCI
- * VPD ROM capability.
- */
-int t3_seeprom_write(struct adapter *adapter, u32 addr, __le32 data)
-{
- u16 val;
- int attempts = EEPROM_MAX_POLL;
- unsigned int base = adapter->params.pci.vpd_cap_addr;
-
- if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
- return -EINVAL;
-
- pci_write_config_dword(adapter->pdev, base + PCI_VPD_DATA,
- le32_to_cpu(data));
- pci_write_config_word(adapter->pdev,base + PCI_VPD_ADDR,
- addr | PCI_VPD_ADDR_F);
- do {
- msleep(1);
- pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val);
- } while ((val & PCI_VPD_ADDR_F) && --attempts);
-
- if (val & PCI_VPD_ADDR_F) {
- CH_ERR(adapter, "write to EEPROM address 0x%x failed\n", addr);
- return -EIO;
- }
- return 0;
-}
-
-/**
* t3_seeprom_wp - enable/disable EEPROM write protection
* @adapter: the adapter
* @enable: 1 to enable write protection, 0 to disable it
@@ -679,7 +608,14 @@ int t3_seeprom_write(struct adapter *adapter, u32 addr, __le32 data)
*/
int t3_seeprom_wp(struct adapter *adapter, int enable)
{
- return t3_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0);
+ u32 data = enable ? 0xc : 0;
+ int ret;
+
+ /* EEPROM_STAT_ADDR is outside VPD area, use pci_write_vpd_any() */
+ ret = pci_write_vpd_any(adapter->pdev, EEPROM_STAT_ADDR, sizeof(u32),
+ &data);
+
+ return ret < 0 ? ret : 0;
}
static int vpdstrtouint(char *s, u8 len, unsigned int base, unsigned int *val)
@@ -709,24 +645,22 @@ static int vpdstrtou16(char *s, u8 len, unsigned int base, u16 *val)
*/
static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
{
- int i, addr, ret;
struct t3_vpd vpd;
+ u8 base_val = 0;
+ int addr, ret;
/*
* Card information is normally at VPD_BASE but some early cards had
* it at 0.
*/
- ret = t3_seeprom_read(adapter, VPD_BASE, (__le32 *)&vpd);
- if (ret)
+ ret = pci_read_vpd(adapter->pdev, VPD_BASE, 1, &base_val);
+ if (ret < 0)
return ret;
- addr = vpd.id_tag == 0x82 ? VPD_BASE : 0;
+ addr = base_val == PCI_VPD_LRDT_ID_STRING ? VPD_BASE : 0;
- for (i = 0; i < sizeof(vpd); i += 4) {
- ret = t3_seeprom_read(adapter, addr + i,
- (__le32 *)((u8 *)&vpd + i));
- if (ret)
- return ret;
- }
+ ret = pci_read_vpd(adapter->pdev, addr, sizeof(vpd), &vpd);
+ if (ret < 0)
+ return ret;
ret = vpdstrtouint(vpd.cclk_data, vpd.cclk_len, 10, &p->cclk);
if (ret)