diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/mvm/scan.c')
-rw-r--r-- | drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 216 |
1 files changed, 213 insertions, 3 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index 49ec515b5bad..a7ec172eeade 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -226,6 +226,14 @@ iwl_mvm_scan_type _iwl_mvm_get_scan_type(struct iwl_mvm *mvm, .global_cnt = 0, }; + /* + * A scanning AP interface probably wants to generate a survey to do + * ACS (automatic channel selection). + * Force a non-fragmented scan in that case. + */ + if (vif && ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_AP) + return IWL_SCAN_TYPE_WILD; + ieee80211_iterate_active_interfaces_atomic(mvm->hw, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_scan_iterator, @@ -852,11 +860,13 @@ static inline bool iwl_mvm_scan_use_ebs(struct iwl_mvm *mvm, * 4. it's not a p2p find operation. * 5. we are not in low latency mode, * or if fragmented ebs is supported by the FW + * 6. the VIF is not an AP interface (scan wants survey results) */ return ((capa->flags & IWL_UCODE_TLV_FLAGS_EBS_SUPPORT) && mvm->last_ebs_successful && IWL_MVM_ENABLE_EBS && vif->type != NL80211_IFTYPE_P2P_DEVICE && - (!low_latency || iwl_mvm_is_frag_ebs_supported(mvm))); + (!low_latency || iwl_mvm_is_frag_ebs_supported(mvm)) && + ieee80211_vif_type_p2p(vif) != NL80211_IFTYPE_AP); } static inline bool iwl_mvm_is_regular_scan(struct iwl_mvm_scan_params *params) @@ -2124,7 +2134,8 @@ static u16 iwl_mvm_scan_umac_flags_v2(struct iwl_mvm *mvm, static u8 iwl_mvm_scan_umac_flags2(struct iwl_mvm *mvm, struct iwl_mvm_scan_params *params, - struct ieee80211_vif *vif, int type) + struct ieee80211_vif *vif, int type, + u16 gen_flags) { u8 flags = 0; @@ -2144,6 +2155,13 @@ static u8 iwl_mvm_scan_umac_flags2(struct iwl_mvm *mvm, IWL_UCODE_TLV_CAPA_SCAN_DONT_TOGGLE_ANT)) flags |= IWL_UMAC_SCAN_GEN_PARAMS_FLAGS2_DONT_TOGGLE_ANT; + /* Passive and AP interface -> ACS (automatic channel selection) */ + if (gen_flags & IWL_UMAC_SCAN_GEN_FLAGS_V2_FORCE_PASSIVE && + ieee80211_vif_type_p2p(vif) == NL80211_IFTYPE_AP && + iwl_fw_lookup_notif_ver(mvm->fw, SCAN_GROUP, CHANNEL_SURVEY_NOTIF, + 0) >= 1) + flags |= IWL_UMAC_SCAN_GEN_FLAGS2_COLLECT_CHANNEL_STATS; + return flags; } @@ -2513,7 +2531,8 @@ static int iwl_mvm_scan_umac_v14_and_above(struct iwl_mvm *mvm, gen_flags = iwl_mvm_scan_umac_flags_v2(mvm, params, vif, type); if (version >= 15) - gen_flags2 = iwl_mvm_scan_umac_flags2(mvm, params, vif, type); + gen_flags2 = iwl_mvm_scan_umac_flags2(mvm, params, vif, type, + gen_flags); else gen_flags2 = 0; @@ -3602,3 +3621,194 @@ int iwl_mvm_int_mlo_scan(struct iwl_mvm *mvm, struct ieee80211_vif *vif) return iwl_mvm_int_mlo_scan_start(mvm, vif, channels, n_channels); } + +static int iwl_mvm_chanidx_from_phy(struct iwl_mvm *mvm, + enum nl80211_band band, + u16 phy_chan_num) +{ + struct ieee80211_supported_band *sband = mvm->hw->wiphy->bands[band]; + int chan_idx; + + if (WARN_ON_ONCE(!sband)) + return -EINVAL; + + for (chan_idx = 0; chan_idx < sband->n_channels; chan_idx++) { + struct ieee80211_channel *channel = &sband->channels[chan_idx]; + + if (channel->hw_value == phy_chan_num) + return chan_idx; + } + + return -EINVAL; +} + +static u32 iwl_mvm_div_by_db(u32 value, u8 db) +{ + /* + * 2^32 * 10**(i / 10) for i = [1, 10], skipping 0 and simply stopping + * at 10 dB and looping instead of using a much larger table. + * + * Using 64 bit math is overkill, but means the helper does not require + * a limit on the input range. + */ + static const u32 db_to_val[] = { + 0xcb59185e, 0xa1866ba8, 0x804dce7a, 0x65ea59fe, 0x50f44d89, + 0x404de61f, 0x331426af, 0x2892c18b, 0x203a7e5b, 0x1999999a, + }; + + while (value && db > 0) { + u8 change = min_t(u8, db, ARRAY_SIZE(db_to_val)); + + value = (((u64)value) * db_to_val[change - 1]) >> 32; + + db -= change; + } + + return value; +} + +VISIBLE_IF_IWLWIFI_KUNIT s8 +iwl_mvm_average_dbm_values(const struct iwl_umac_scan_channel_survey_notif *notif) +{ + s8 average_magnitude; + u32 average_factor; + s8 sum_magnitude = -128; + u32 sum_factor = 0; + int i, count = 0; + + /* + * To properly average the decibel values (signal values given in dBm) + * we need to do the math in linear space. Doing a linear average of + * dB (dBm) values is a bit annoying though due to the large range of + * at least -10 to -110 dBm that will not fit into a 32 bit integer. + * + * A 64 bit integer should be sufficient, but then we still have the + * problem that there are no directly usable utility functions + * available. + * + * So, lets not deal with that and instead do much of the calculation + * with a 16.16 fixed point integer along with a base in dBm. 16.16 bit + * gives us plenty of head-room for adding up a few values and even + * doing some math on it. And the tail should be accurate enough too + * (1/2^16 is somewhere around -48 dB, so effectively zero). + * + * i.e. the real value of sum is: + * sum = sum_factor / 2^16 * 10^(sum_magnitude / 10) mW + * + * However, that does mean we need to be able to bring two values to + * a common base, so we need a helper for that. + * + * Note that this function takes an input with unsigned negative dBm + * values but returns a signed dBm (i.e. a negative value). + */ + + for (i = 0; i < ARRAY_SIZE(notif->noise); i++) { + s8 val_magnitude; + u32 val_factor; + + if (notif->noise[i] == 0xff) + continue; + + val_factor = 0x10000; + val_magnitude = -notif->noise[i]; + + if (val_magnitude <= sum_magnitude) { + u8 div_db = sum_magnitude - val_magnitude; + + val_factor = iwl_mvm_div_by_db(val_factor, div_db); + val_magnitude = sum_magnitude; + } else { + u8 div_db = val_magnitude - sum_magnitude; + + sum_factor = iwl_mvm_div_by_db(sum_factor, div_db); + sum_magnitude = val_magnitude; + } + + sum_factor += val_factor; + count++; + } + + /* No valid noise measurement, return a very high noise level */ + if (count == 0) + return 0; + + average_magnitude = sum_magnitude; + average_factor = sum_factor / count; + + /* + * average_factor will be a number smaller than 1.0 (0x10000) at this + * point. What we need to do now is to adjust average_magnitude so that + * average_factor is between -0.5 dB and 0.5 dB. + * + * Just do -1 dB steps and find the point where + * -0.5 dB * -i dB = 0x10000 * 10^(-0.5/10) / i dB + * = div_by_db(0xe429, i) + * is smaller than average_factor. + */ + for (i = 0; average_factor < iwl_mvm_div_by_db(0xe429, i); i++) { + /* nothing */ + } + + return average_magnitude - i; +} +EXPORT_SYMBOL_IF_IWLWIFI_KUNIT(iwl_mvm_average_dbm_values); + +void iwl_mvm_rx_channel_survey_notif(struct iwl_mvm *mvm, + struct iwl_rx_cmd_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + const struct iwl_umac_scan_channel_survey_notif *notif = + (void *)pkt->data; + struct iwl_mvm_acs_survey_channel *info; + enum nl80211_band band; + int chan_idx; + + lockdep_assert_held(&mvm->mutex); + + if (!mvm->acs_survey) { + size_t n_channels = 0; + + for (band = 0; band < NUM_NL80211_BANDS; band++) { + if (!mvm->hw->wiphy->bands[band]) + continue; + + n_channels += mvm->hw->wiphy->bands[band]->n_channels; + } + + mvm->acs_survey = kzalloc(struct_size(mvm->acs_survey, + channels, n_channels), + GFP_KERNEL); + + if (!mvm->acs_survey) + return; + + mvm->acs_survey->n_channels = n_channels; + n_channels = 0; + for (band = 0; band < NUM_NL80211_BANDS; band++) { + if (!mvm->hw->wiphy->bands[band]) + continue; + + mvm->acs_survey->bands[band] = + &mvm->acs_survey->channels[n_channels]; + n_channels += mvm->hw->wiphy->bands[band]->n_channels; + } + } + + band = iwl_mvm_nl80211_band_from_phy(le32_to_cpu(notif->band)); + chan_idx = iwl_mvm_chanidx_from_phy(mvm, band, + le32_to_cpu(notif->channel)); + if (WARN_ON_ONCE(chan_idx < 0)) + return; + + IWL_DEBUG_SCAN(mvm, "channel survey received for freq %d\n", + mvm->hw->wiphy->bands[band]->channels[chan_idx].center_freq); + + info = &mvm->acs_survey->bands[band][chan_idx]; + + /* Times are all in ms */ + info->time = le32_to_cpu(notif->active_time); + info->time_busy = le32_to_cpu(notif->busy_time); + info->time_rx = le32_to_cpu(notif->rx_time); + info->time_tx = le32_to_cpu(notif->tx_time); + info->noise = iwl_mvm_average_dbm_values(notif); +} |