diff options
Diffstat (limited to 'drivers/ptp/idt8a340_reg.h')
| -rw-r--r-- | drivers/ptp/idt8a340_reg.h | 61 |
1 files changed, 60 insertions, 1 deletions
diff --git a/drivers/ptp/idt8a340_reg.h b/drivers/ptp/idt8a340_reg.h index ac524cf0f31f..dea8e1d6edaa 100644 --- a/drivers/ptp/idt8a340_reg.h +++ b/drivers/ptp/idt8a340_reg.h @@ -5,7 +5,7 @@ * https://github.com/richardcochran/regen * * Hand modified to include some HW registers. - * Based on 4.8.0, SCSR rev C commit a03c7ae5 + * Based on 5.2.0, Family Programming Guide (Sept 30, 2020) */ #ifndef HAVE_IDT8A340_REG #define HAVE_IDT8A340_REG @@ -100,6 +100,7 @@ #define RESET_CTRL 0xc000 #define SM_RESET 0x0012 +#define SM_RESET_V520 0x0013 #define SM_RESET_CMD 0x5A #define GENERAL_STATUS 0xc014 @@ -130,6 +131,8 @@ #define GPIO_USER_CONTROL 0xc160 #define GPIO0_TO_7_OUT 0x0000 #define GPIO8_TO_15_OUT 0x0001 +#define GPIO0_TO_7_OUT_V520 0x0002 +#define GPIO8_TO_15_OUT_V520 0x0003 #define STICKY_STATUS_CLEAR 0xc164 @@ -216,22 +219,27 @@ #define DPLL_REF_MODE 0x0035 #define DPLL_PHASE_MEASUREMENT_CFG 0x0036 #define DPLL_MODE 0x0037 +#define DPLL_MODE_V520 0x003B #define DPLL_1 0xc400 #define DPLL_2 0xc438 +#define DPLL_2_V520 0xc43c #define DPLL_3 0xc480 #define DPLL_4 0xc4b8 +#define DPLL_4_V520 0xc4bc #define DPLL_5 0xc500 #define DPLL_6 0xc538 +#define DPLL_6_V520 0xc53c #define DPLL_7 0xc580 #define SYS_DPLL 0xc5b8 +#define SYS_DPLL_V520 0xc5bc #define DPLL_CTRL_0 0xc600 #define DPLL_CTRL_DPLL_MANU_REF_CFG 0x0001 @@ -331,6 +339,7 @@ #define GPIO_ALERT_OUT_CFG 0x000e #define GPIO_TOD_NOTIFICATION_CFG 0x000f #define GPIO_CTRL 0x0010 +#define GPIO_CTRL_V520 0x0011 #define GPIO_1 0xc8d4 @@ -365,6 +374,7 @@ #define OUT_DIV_MUX 0xca12 #define OUTPUT_0 0xca14 +#define OUTPUT_0_V520 0xca20 /* FOD frequency output divider value */ #define OUT_DIV 0x0000 #define OUT_DUTY_CYCLE_HIGH 0x0004 @@ -374,28 +384,40 @@ #define OUT_PHASE_ADJ 0x000c #define OUTPUT_1 0xca24 +#define OUTPUT_1_V520 0xca30 #define OUTPUT_2 0xca34 +#define OUTPUT_2_V520 0xca40 #define OUTPUT_3 0xca44 +#define OUTPUT_3_V520 0xca50 #define OUTPUT_4 0xca54 +#define OUTPUT_4_V520 0xca60 #define OUTPUT_5 0xca64 +#define OUTPUT_5_V520 0xca80 #define OUTPUT_6 0xca80 +#define OUTPUT_6_V520 0xca90 #define OUTPUT_7 0xca90 +#define OUTPUT_7_V520 0xcaa0 #define OUTPUT_8 0xcaa0 +#define OUTPUT_8_V520 0xcab0 #define OUTPUT_9 0xcab0 +#define OUTPUT_9_V520 0xcac0 #define OUTPUT_10 0xcac0 +#define OUTPUT_10_V520 0xcad0 #define OUTPUT_11 0xcad0 +#define OUTPUT_11_V520 0xcae0 #define SERIAL 0xcae0 +#define SERIAL_V520 0xcaf0 #define PWM_ENCODER_0 0xcb00 @@ -416,50 +438,72 @@ #define PWM_DECODER_0 0xcb40 #define PWM_DECODER_1 0xcb48 +#define PWM_DECODER_1_V520 0xcb4a #define PWM_DECODER_2 0xcb50 +#define PWM_DECODER_2_V520 0xcb54 #define PWM_DECODER_3 0xcb58 +#define PWM_DECODER_3_V520 0xcb5e #define PWM_DECODER_4 0xcb60 +#define PWM_DECODER_4_V520 0xcb68 #define PWM_DECODER_5 0xcb68 +#define PWM_DECODER_5_V520 0xcb80 #define PWM_DECODER_6 0xcb70 +#define PWM_DECODER_6_V520 0xcb8a #define PWM_DECODER_7 0xcb80 +#define PWM_DECODER_7_V520 0xcb94 #define PWM_DECODER_8 0xcb88 +#define PWM_DECODER_8_V520 0xcb9e #define PWM_DECODER_9 0xcb90 +#define PWM_DECODER_9_V520 0xcba8 #define PWM_DECODER_10 0xcb98 +#define PWM_DECODER_10_V520 0xcbb2 #define PWM_DECODER_11 0xcba0 +#define PWM_DECODER_11_V520 0xcbbc #define PWM_DECODER_12 0xcba8 +#define PWM_DECODER_12_V520 0xcbc6 #define PWM_DECODER_13 0xcbb0 +#define PWM_DECODER_13_V520 0xcbd0 #define PWM_DECODER_14 0xcbb8 +#define PWM_DECODER_14_V520 0xcbda #define PWM_DECODER_15 0xcbc0 +#define PWM_DECODER_15_V520 0xcbe4 #define PWM_USER_DATA 0xcbc8 +#define PWM_USER_DATA_V520 0xcbf0 #define TOD_0 0xcbcc +#define TOD_0_V520 0xcc00 /* Enable TOD counter, output channel sync and even-PPS mode */ #define TOD_CFG 0x0000 +#define TOD_CFG_V520 0x0001 #define TOD_1 0xcbce +#define TOD_1_V520 0xcc02 #define TOD_2 0xcbd0 +#define TOD_2_V520 0xcc04 #define TOD_3 0xcbd2 +#define TOD_3_V520 0xcc06 #define TOD_WRITE_0 0xcc00 +#define TOD_WRITE_0_V520 0xcc10 /* 8-bit subns, 32-bit ns, 48-bit seconds */ #define TOD_WRITE 0x0000 /* Counter increments after TOD write is completed */ @@ -470,12 +514,16 @@ #define TOD_WRITE_CMD 0x000f #define TOD_WRITE_1 0xcc10 +#define TOD_WRITE_1_V520 0xcc20 #define TOD_WRITE_2 0xcc20 +#define TOD_WRITE_2_V520 0xcc30 #define TOD_WRITE_3 0xcc30 +#define TOD_WRITE_3_V520 0xcc40 #define TOD_READ_PRIMARY_0 0xcc40 +#define TOD_READ_PRIMARY_0_V520 0xcc50 /* 8-bit subns, 32-bit ns, 48-bit seconds */ #define TOD_READ_PRIMARY 0x0000 /* Counter increments after TOD write is completed */ @@ -484,22 +532,31 @@ #define TOD_READ_PRIMARY_SEL_CFG_0 0x000c /* Read trigger selection */ #define TOD_READ_PRIMARY_CMD 0x000e +#define TOD_READ_PRIMARY_CMD_V520 0x000f #define TOD_READ_PRIMARY_1 0xcc50 +#define TOD_READ_PRIMARY_1_V520 0xcc60 #define TOD_READ_PRIMARY_2 0xcc60 +#define TOD_READ_PRIMARY_2_V520 0xcc80 #define TOD_READ_PRIMARY_3 0xcc80 +#define TOD_READ_PRIMARY_3_V520 0xcc90 #define TOD_READ_SECONDARY_0 0xcc90 +#define TOD_READ_SECONDARY_0_V520 0xcca0 #define TOD_READ_SECONDARY_1 0xcca0 +#define TOD_READ_SECONDARY_1_V520 0xccb0 #define TOD_READ_SECONDARY_2 0xccb0 +#define TOD_READ_SECONDARY_2_V520 0xccc0 #define TOD_READ_SECONDARY_3 0xccc0 +#define TOD_READ_SECONDARY_3_V520 0xccd0 #define OUTPUT_TDC_CFG 0xccd0 +#define OUTPUT_TDC_CFG_V520 0xcce0 #define OUTPUT_TDC_0 0xcd00 @@ -512,8 +569,10 @@ #define INPUT_TDC 0xcd20 #define SCRATCH 0xcf50 +#define SCRATCH_V520 0xcf4c #define EEPROM 0xcf68 +#define EEPROM_V520 0xcf64 #define OTP 0xcf70 |