summaryrefslogtreecommitdiff
path: root/drivers/scsi/pm8001/pm80xx_hwi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/pm8001/pm80xx_hwi.c')
-rw-r--r--drivers/scsi/pm8001/pm80xx_hwi.c50
1 files changed, 25 insertions, 25 deletions
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 45ecd9639977..6ffe17b849ae 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -140,7 +140,7 @@ ssize_t pm80xx_get_fatal_dump(struct device *cdev,
pm8001_ha->fatal_bar_loc = 0;
}
- /* Read until accum_len is retrived */
+ /* Read until accum_len is retrieved */
accum_len = pm8001_mr32(fatal_table_address,
MPI_FATAL_EDUMP_TABLE_ACCUM_LEN);
/* Determine length of data between previously stored transfer length
@@ -1011,7 +1011,7 @@ static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
value);
return -EBUSY;
}
- /* check the MPI-State for initialization upto 100ms*/
+ /* check the MPI-State for initialization up to 100ms*/
max_wait_count = 5;/* 100 msec */
do {
msleep(FW_READY_INTERVAL);
@@ -1093,7 +1093,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
- /**
+ /*
* lower 26 bits of SCRATCHPAD0 register describes offset within the
* PCIe BAR where the MPI configuration table is present
*/
@@ -1101,7 +1101,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
pm8001_dbg(pm8001_ha, DEV, "Scratchpad 0 Offset: 0x%x value 0x%x\n",
offset, value);
- /**
+ /*
* Upper 6 bits describe the offset within PCI config space where BAR
* is located.
*/
@@ -1109,7 +1109,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
pcibar = get_pci_bar_index(pcilogic);
pm8001_dbg(pm8001_ha, INIT, "Scratchpad 0 PCI BAR: %d\n", pcibar);
- /**
+ /*
* Make sure the offset falls inside the ioremapped PCI BAR
*/
if (offset > pm8001_ha->io_mem[pcibar].memsize) {
@@ -1121,7 +1121,7 @@ static int init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
pm8001_ha->main_cfg_tbl_addr = base_addr =
pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
- /**
+ /*
* Validate main configuration table address: first DWord should read
* "PMCS"
*/
@@ -1385,7 +1385,7 @@ pm80xx_get_encrypt_info(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_encrypt_update - update flash with encryption informtion
+ * pm80xx_encrypt_update - update flash with encryption information
* @pm8001_ha: our hba card information.
*/
static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
@@ -1422,7 +1422,7 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_chip_init - the main init function that initialize whole PM8001 chip.
+ * pm80xx_chip_init - the main init function that initializes whole PM8001 chip.
* @pm8001_ha: our hba card information
*/
static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha)
@@ -1541,7 +1541,7 @@ static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_fatal_errors - returns non zero *ONLY* when fatal errors
+ * pm80xx_fatal_errors - returns non-zero *ONLY* when fatal errors
* @pm8001_ha: our hba card information
*
* Fatal errors are recoverable only after a host reboot.
@@ -1576,8 +1576,8 @@ pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha)
}
/**
- * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
- * the FW register status to the originated status.
+ * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that all
+ * FW register status are reset to the originated status.
* @pm8001_ha: our hba card information
*/
@@ -1895,13 +1895,13 @@ static void pm80xx_send_read_log(struct pm8001_hba_info *pm8001_ha,
}
/**
- * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * mpi_ssp_completion - process the event that FW response to the SSP request.
* @pm8001_ha: our hba card information
* @piomb: the message contents of this outbound message.
*
* When FW has completed a ssp request for example a IO request, after it has
- * filled the SG data with the data, it will trigger this event represent
- * that he has finished the job,please check the coresponding buffer.
+ * filled the SG data with the data, it will trigger this event representing
+ * that he has finished the job; please check the corresponding buffer.
* So we will tell the caller who maybe waiting the result to tell upper layer
* that the task has been finished.
*/
@@ -3217,7 +3217,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * pm80xx_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * pm80xx_hw_event_ack_req- For PM8001, some events need to acknowledge to FW.
* @pm8001_ha: our hba card information
* @Qnum: the outbound queue message number.
* @SEA: source of event to ack
@@ -3275,7 +3275,7 @@ static void hw_event_port_recover(struct pm8001_hba_info *pm8001_ha,
}
/**
- * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * hw_event_sas_phy_up - FW tells me a SAS phy up event.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3353,7 +3353,7 @@ hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * hw_event_sata_phy_up - FW tells me a SATA phy up event.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3400,7 +3400,7 @@ hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * hw_event_phy_down -we should notify the libsas the phy is down.
+ * hw_event_phy_down - we should notify the libsas the phy is down.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3500,7 +3500,7 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * mpi_thermal_hw_event -The hw event has come.
+ * mpi_thermal_hw_event - a thermal hw event has come.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -3530,7 +3530,7 @@ static int mpi_thermal_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
}
/**
- * mpi_hw_event -The hw event has come.
+ * mpi_hw_event - The hw event has come.
* @pm8001_ha: our hba card information
* @piomb: IO message buffer
*/
@@ -4025,7 +4025,7 @@ static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
case OPC_OUB_SET_DEV_INFO:
pm8001_dbg(pm8001_ha, MSG, "OPC_OUB_SET_DEV_INFO\n");
break;
- /* spcv specifc commands */
+ /* spcv specific commands */
case OPC_OUB_PHY_START_RESP:
pm8001_dbg(pm8001_ha, MSG,
"OPC_OUB_PHY_START_RESP opcode:%x\n", opc);
@@ -4186,7 +4186,7 @@ static void build_smp_cmd(u32 deviceID, __le32 hTag,
}
/**
- * pm80xx_chip_smp_req - send a SMP task to FW
+ * pm80xx_chip_smp_req - send an SMP task to FW
* @pm8001_ha: our hba card information.
* @ccb: the ccb information this request used.
*/
@@ -4346,7 +4346,7 @@ static int check_enc_sat_cmd(struct sas_task *task)
}
/**
- * pm80xx_chip_ssp_io_req - send a SSP task to FW
+ * pm80xx_chip_ssp_io_req - send an SSP task to FW
* @pm8001_ha: our hba card information.
* @ccb: the ccb information this request used.
*/
@@ -4750,13 +4750,13 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
LINKMODE_AUTO | pm8001_ha->link_rate | phy_id);
/* SSC Disable and SAS Analog ST configuration */
- /**
+ /*
payload.ase_sh_lm_slr_phyid =
cpu_to_le32(SSC_DISABLE_30 | SAS_ASE | SPINHOLD_DISABLE |
LINKMODE_AUTO | LINKRATE_15 | LINKRATE_30 | LINKRATE_60 |
phy_id);
Have to add "SAS PHY Analog Setup SPASTI 1 Byte" Based on need
- **/
+ */
payload.sas_identify.dev_type = SAS_END_DEVICE;
payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;