1 files changed, 0 insertions, 105 deletions
diff --git a/drivers/soc/bcm/brcmstb/pm/aon_defs.h b/drivers/soc/bcm/brcmstb/pm/aon_defs.h
deleted file mode 100644
index f695262ac930..000000000000
--- a/drivers/soc/bcm/brcmstb/pm/aon_defs.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Always ON (AON) register interface between bootloader and Linux
- *
- * Copyright © 2014-2017 Broadcom
- */
-
-#ifndef __BRCMSTB_AON_DEFS_H__
-#define __BRCMSTB_AON_DEFS_H__
-
-#include <linux/compiler.h>
-
-/* Magic number in upper 16-bits */
-#define BRCMSTB_S3_MAGIC_MASK                   0xffff0000
-#define BRCMSTB_S3_MAGIC_SHORT                  0x5AFE0000
-
-enum {
-	/* Restore random key for AES memory verification (off = fixed key) */
-	S3_FLAG_LOAD_RANDKEY		= (1 << 0),
-
-	/* Scratch buffer page table is present */
-	S3_FLAG_SCRATCH_BUFFER_TABLE	= (1 << 1),
-
-	/* Skip all memory verification */
-	S3_FLAG_NO_MEM_VERIFY		= (1 << 2),
-
-	/*
-	 * Modification of this bit reserved for bootloader only.
-	 * 1=PSCI started Linux, 0=Direct jump to Linux.
-	 */
-	S3_FLAG_PSCI_BOOT		= (1 << 3),
-
-	/*
-	 * Modification of this bit reserved for bootloader only.
-	 * 1=64 bit boot, 0=32 bit boot.
-	 */
-	S3_FLAG_BOOTED64		= (1 << 4),
-};
-
-#define BRCMSTB_HASH_LEN			(128 / 8) /* 128-bit hash */
-
-#define AON_REG_MAGIC_FLAGS			0x00
-#define AON_REG_CONTROL_LOW			0x04
-#define AON_REG_CONTROL_HIGH			0x08
-#define AON_REG_S3_HASH				0x0c /* hash of S3 params */
-#define AON_REG_CONTROL_HASH_LEN		0x1c
-#define AON_REG_PANIC				0x20
-
-#define BRCMSTB_S3_MAGIC		0x5AFEB007
-#define BRCMSTB_PANIC_MAGIC		0x512E115E
-#define BOOTLOADER_SCRATCH_SIZE		64
-#define BRCMSTB_DTU_STATE_MAP_ENTRIES	(8*1024)
-#define BRCMSTB_DTU_CONFIG_ENTRIES	(512)
-#define BRCMSTB_DTU_COUNT		(2)
-
-#define IMAGE_DESCRIPTORS_BUFSIZE	(2 * 1024)
-#define S3_BOOTLOADER_RESERVED		(S3_FLAG_PSCI_BOOT | S3_FLAG_BOOTED64)
-
-struct brcmstb_bootloader_dtu_table {
-	uint32_t	dtu_state_map[BRCMSTB_DTU_STATE_MAP_ENTRIES];
-	uint32_t	dtu_config[BRCMSTB_DTU_CONFIG_ENTRIES];
-};
-
-/*
- * Bootloader utilizes a custom parameter block left in DRAM for handling S3
- * warm resume
- */
-struct brcmstb_s3_params {
-	/* scratch memory for bootloader */
-	uint8_t scratch[BOOTLOADER_SCRATCH_SIZE];
-
-	uint32_t magic; /* BRCMSTB_S3_MAGIC */
-	uint64_t reentry; /* PA */
-
-	/* descriptors */
-	uint32_t hash[BRCMSTB_HASH_LEN / 4];
-
-	/*
-	 * If 0, then ignore this parameter (there is only one set of
-	 *   descriptors)
-	 *
-	 * If non-0, then a second set of descriptors is stored at:
-	 *
-	 *   descriptors + desc_offset_2
-	 *
-	 * The MAC result of both descriptors is XOR'd and stored in @hash
-	 */
-	uint32_t desc_offset_2;
-
-	/*
-	 * (Physical) address of a brcmstb_bootloader_scratch_table, for
-	 * providing a large DRAM buffer to the bootloader
-	 */
-	uint64_t buffer_table;
-
-	uint32_t spare[70];
-
-	uint8_t descriptors[IMAGE_DESCRIPTORS_BUFSIZE];
-	/*
-	 * Must be last member of struct. See brcmstb_pm_s3_finish() for reason.
-	 */
-	struct brcmstb_bootloader_dtu_table dtu[BRCMSTB_DTU_COUNT];
-} __packed;
-
-#endif /* __BRCMSTB_AON_DEFS_H__ */