diff options
Diffstat (limited to 'drivers/soc/canaan')
| -rw-r--r-- | drivers/soc/canaan/k210-sysctl.c | 93 |
1 files changed, 26 insertions, 67 deletions
diff --git a/drivers/soc/canaan/k210-sysctl.c b/drivers/soc/canaan/k210-sysctl.c index 4608fbca20e1..60b474c33d45 100644 --- a/drivers/soc/canaan/k210-sysctl.c +++ b/drivers/soc/canaan/k210-sysctl.c @@ -12,74 +12,33 @@ #include <linux/bitfield.h> #include <asm/soc.h> +#include <soc/canaan/k210-sysctl.h> + #define K210_SYSCTL_CLK0_FREQ 26000000UL /* Registers base address */ #define K210_SYSCTL_SYSCTL_BASE_ADDR 0x50440000ULL -/* Registers */ -#define K210_SYSCTL_PLL0 0x08 -#define K210_SYSCTL_PLL1 0x0c -/* clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */ -#define PLL_RESET (1 << 20) -#define PLL_PWR (1 << 21) -#define PLL_INTFB (1 << 22) -#define PLL_BYPASS (1 << 23) -#define PLL_TEST (1 << 24) -#define PLL_OUT_EN (1 << 25) -#define PLL_TEST_EN (1 << 26) -#define K210_SYSCTL_PLL_LOCK 0x18 -#define PLL0_LOCK1 (1 << 0) -#define PLL0_LOCK2 (1 << 1) -#define PLL0_SLIP_CLEAR (1 << 2) -#define PLL0_TEST_CLK_OUT (1 << 3) -#define PLL1_LOCK1 (1 << 8) -#define PLL1_LOCK2 (1 << 9) -#define PLL1_SLIP_CLEAR (1 << 10) -#define PLL1_TEST_CLK_OUT (1 << 11) -#define PLL2_LOCK1 (1 << 16) -#define PLL2_LOCK2 (1 << 16) -#define PLL2_SLIP_CLEAR (1 << 18) -#define PLL2_TEST_CLK_OUT (1 << 19) -#define K210_SYSCTL_CLKSEL0 0x20 -#define CLKSEL_ACLK (1 << 0) -#define K210_SYSCTL_CLKEN_CENT 0x28 -#define CLKEN_CPU (1 << 0) -#define CLKEN_SRAM0 (1 << 1) -#define CLKEN_SRAM1 (1 << 2) -#define CLKEN_APB0 (1 << 3) -#define CLKEN_APB1 (1 << 4) -#define CLKEN_APB2 (1 << 5) -#define K210_SYSCTL_CLKEN_PERI 0x2c -#define CLKEN_ROM (1 << 0) -#define CLKEN_DMA (1 << 1) -#define CLKEN_AI (1 << 2) -#define CLKEN_DVP (1 << 3) -#define CLKEN_FFT (1 << 4) -#define CLKEN_GPIO (1 << 5) -#define CLKEN_SPI0 (1 << 6) -#define CLKEN_SPI1 (1 << 7) -#define CLKEN_SPI2 (1 << 8) -#define CLKEN_SPI3 (1 << 9) -#define CLKEN_I2S0 (1 << 10) -#define CLKEN_I2S1 (1 << 11) -#define CLKEN_I2S2 (1 << 12) -#define CLKEN_I2C0 (1 << 13) -#define CLKEN_I2C1 (1 << 14) -#define CLKEN_I2C2 (1 << 15) -#define CLKEN_UART1 (1 << 16) -#define CLKEN_UART2 (1 << 17) -#define CLKEN_UART3 (1 << 18) -#define CLKEN_AES (1 << 19) -#define CLKEN_FPIO (1 << 20) -#define CLKEN_TIMER0 (1 << 21) -#define CLKEN_TIMER1 (1 << 22) -#define CLKEN_TIMER2 (1 << 23) -#define CLKEN_WDT0 (1 << 24) -#define CLKEN_WDT1 (1 << 25) -#define CLKEN_SHA (1 << 26) -#define CLKEN_OTP (1 << 27) -#define CLKEN_RTC (1 << 29) +/* Register bits */ +/* K210_SYSCTL_PLL1: clkr: 4bits, clkf1: 6bits, clkod: 4bits, bwadj: 4bits */ +#define PLL_RESET (1 << 20) +#define PLL_PWR (1 << 21) +#define PLL_BYPASS (1 << 23) +#define PLL_OUT_EN (1 << 25) +/* K210_SYSCTL_PLL_LOCK */ +#define PLL1_LOCK1 (1 << 8) +#define PLL1_LOCK2 (1 << 9) +#define PLL1_SLIP_CLEAR (1 << 10) +/* K210_SYSCTL_SEL0 */ +#define CLKSEL_ACLK (1 << 0) +/* K210_SYSCTL_CLKEN_CENT */ +#define CLKEN_CPU (1 << 0) +#define CLKEN_SRAM0 (1 << 1) +#define CLKEN_SRAM1 (1 << 2) +/* K210_SYSCTL_EN_PERI */ +#define CLKEN_ROM (1 << 0) +#define CLKEN_TIMER0 (1 << 21) +#define CLKEN_RTC (1 << 29) struct k210_sysctl { void __iomem *regs; @@ -140,7 +99,7 @@ static unsigned long k210_sysctl_clk_recalc_rate(struct clk_hw *hw, * If the clock selector is not set, use the base frequency. * Otherwise, use PLL0 frequency with a frequency divisor. */ - clksel0 = readl(s->regs + K210_SYSCTL_CLKSEL0); + clksel0 = readl(s->regs + K210_SYSCTL_SEL0); if (!(clksel0 & CLKSEL_ACLK)) return K210_SYSCTL_CLK0_FREQ; @@ -237,11 +196,11 @@ static void __init k210_soc_early_init(const void *fdt) k210_set_bits(PLL_OUT_EN, regs + K210_SYSCTL_PLL0); k210_set_bits(CLKEN_CPU | CLKEN_SRAM0 | CLKEN_SRAM1, - regs + K210_SYSCTL_CLKEN_CENT); + regs + K210_SYSCTL_EN_CENT); k210_set_bits(CLKEN_ROM | CLKEN_TIMER0 | CLKEN_RTC, - regs + K210_SYSCTL_CLKEN_PERI); + regs + K210_SYSCTL_EN_PERI); - k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_CLKSEL0); + k210_set_bits(CLKSEL_ACLK, regs + K210_SYSCTL_SEL0); iounmap(regs); } |