summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-topcliff-pch.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-topcliff-pch.c')
-rw-r--r--drivers/spi/spi-topcliff-pch.c47
1 files changed, 6 insertions, 41 deletions
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 88eb57e858b3..f406b30af961 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -332,7 +332,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
data->transfer_active = false;
wake_up(&data->wait);
} else {
- dev_err(&data->master->dev,
+ dev_vdbg(&data->master->dev,
"%s : Transfer is not completed",
__func__);
}
@@ -464,20 +464,6 @@ static void pch_spi_reset(struct spi_master *master)
pch_spi_writereg(master, PCH_SRST, 0x0);
}
-static int pch_spi_setup(struct spi_device *pspi)
-{
- /* Check baud rate setting */
- /* if baud rate of chip is greater than
- max we can support,return error */
- if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE)
- pspi->max_speed_hz = PCH_MAX_BAUDRATE;
-
- dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__,
- (pspi->mode) & (SPI_CPOL | SPI_CPHA));
-
- return 0;
-}
-
static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
{
@@ -486,23 +472,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
int retval;
unsigned long flags;
- /* validate spi message and baud rate */
- if (unlikely(list_empty(&pmsg->transfers) == 1)) {
- dev_err(&pspi->dev, "%s list empty\n", __func__);
- retval = -EINVAL;
- goto err_out;
- }
-
- if (unlikely(pspi->max_speed_hz == 0)) {
- dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n",
- __func__, pspi->max_speed_hz);
- retval = -EINVAL;
- goto err_out;
- }
-
- dev_dbg(&pspi->dev,
- "%s Transfer List not empty. Transfer Speed is set.\n", __func__);
-
spin_lock_irqsave(&data->lock, flags);
/* validate Tx/Rx buffers and Transfer length */
list_for_each_entry(transfer, &pmsg->transfers, transfer_list) {
@@ -523,10 +492,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
dev_dbg(&pspi->dev,
"%s Tx/Rx buffer valid. Transfer length valid\n",
__func__);
-
- /* if baud rate has been specified validate the same */
- if (transfer->speed_hz > PCH_MAX_BAUDRATE)
- transfer->speed_hz = PCH_MAX_BAUDRATE;
}
spin_unlock_irqrestore(&data->lock, flags);
@@ -1151,8 +1116,7 @@ static void pch_spi_handle_dma(struct pch_spi_data *data, int *bpw)
dma->nent = num;
dma->desc_tx = desc_tx;
- dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing "
- "0x2 to SSNXCR\n", __func__);
+ dev_dbg(&data->master->dev, "%s:Pulling down SSN low - writing 0x2 to SSNXCR\n", __func__);
spin_lock_irqsave(&data->lock, flags);
pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW);
@@ -1418,10 +1382,10 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
/* initialize members of SPI master */
master->num_chipselect = PCH_MAX_CS;
- master->setup = pch_spi_setup;
master->transfer = pch_spi_transfer;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
+ master->max_speed_hz = PCH_MAX_BAUDRATE;
data->board_dat = board_dat;
data->plat_dev = plat_dev;
@@ -1605,8 +1569,7 @@ static struct platform_driver pch_spi_pd_driver = {
.resume = pch_spi_pd_resume
};
-static int pch_spi_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
+static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct pch_spi_board_data *board_dat;
struct platform_device *pd_dev = NULL;
@@ -1676,6 +1639,8 @@ static int pch_spi_probe(struct pci_dev *pdev,
return 0;
err_platform_device:
+ while (--i >= 0)
+ platform_device_unregister(pd_dev_save->pd_save[i]);
pci_disable_device(pdev);
pci_enable_device:
pci_release_regions(pdev);