diff options
Diffstat (limited to 'drivers/staging/lustre/sysfs-fs-lustre')
-rw-r--r-- | drivers/staging/lustre/sysfs-fs-lustre | 654 |
1 files changed, 0 insertions, 654 deletions
diff --git a/drivers/staging/lustre/sysfs-fs-lustre b/drivers/staging/lustre/sysfs-fs-lustre deleted file mode 100644 index 8691c6543a9c..000000000000 --- a/drivers/staging/lustre/sysfs-fs-lustre +++ /dev/null @@ -1,654 +0,0 @@ -What: /sys/fs/lustre/version -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows current running lustre version. - -What: /sys/fs/lustre/pinger -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows if the lustre module has pinger support. - "on" means yes and "off" means no. - -What: /sys/fs/lustre/health_check -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows whenever current system state believed to be "healthy", - "NOT HEALTHY", or "LBUG" whenever lustre has experienced - an internal assertion failure - -What: /sys/fs/lustre/jobid_name -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Currently running job "name" for this node to be transferred - to Lustre servers for purposes of QoS and statistics gathering. - Writing into this file will change the name, reading outputs - currently set value. - -What: /sys/fs/lustre/jobid_var -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Control file for lustre "jobstats" functionality, write new - value from the list below to change the mode: - disable - disable job name reporting to the servers (default) - procname_uid - form the job name as the current running - command name and pid with a dot in between - e.g. dd.1253 - nodelocal - use jobid_name value from above. - -What: /sys/fs/lustre/timeout -Date: June 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls "lustre timeout" variable, also known as obd_timeout - in some old manual. In the past obd_timeout was of paramount - importance as the timeout value used everywhere and where - other timeouts were derived from. These days it's much less - important as network timeouts are mostly determined by - AT (adaptive timeouts). - Unit: seconds, default: 100 - -What: /sys/fs/lustre/max_dirty_mb -Date: June 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls total number of dirty cache (in megabytes) allowed - across all mounted lustre filesystems. - Since writeout of dirty pages in Lustre is somewhat expensive, - when you allow to many dirty pages, this might lead to - performance degradations as kernel tries to desperately - find some pages to free/writeout. - Default 1/2 RAM. Min value 4, max value 9/10 of RAM. - -What: /sys/fs/lustre/debug_peer_on_timeout -Date: June 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Control if lnet debug information should be printed when - an RPC timeout occurs. - 0 disabled (default) - 1 enabled - -What: /sys/fs/lustre/dump_on_timeout -Date: June 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls if Lustre debug log should be dumped when an RPC - timeout occurs. This is useful if yout debug buffer typically - rolls over by the time you notice RPC timeouts. - -What: /sys/fs/lustre/dump_on_eviction -Date: June 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls if Lustre debug log should be dumped when an this - client is evicted from one of the servers. - This is useful if yout debug buffer typically rolls over - by the time you notice the eviction event. - -What: /sys/fs/lustre/at_min -Date: July 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls minimum adaptive timeout in seconds. If you encounter - a case where clients timeout due to server-reported processing - time being too short, you might consider increasing this value. - One common case of this if the underlying network has - unpredictable long delays. - Default: 0 - -What: /sys/fs/lustre/at_max -Date: July 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls maximum adaptive timeout in seconds. If at_max timeout - is reached for an RPC, the RPC will time out. - Some genuinuely slow network hardware might warrant increasing - this value. - Setting this value to 0 disables Adaptive Timeouts - functionality and old-style obd_timeout value is then used. - Default: 600 - -What: /sys/fs/lustre/at_extra -Date: July 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls how much extra time to request for unfinished requests - in processing in seconds. Normally a server-side parameter, it - is also used on the client for responses to various LDLM ASTs - that are handled with a special server thread on the client. - This is a way for the servers to ask the clients not to time - out the request that reached current servicing time estimate - yet and give it some more time. - Default: 30 - -What: /sys/fs/lustre/at_early_margin -Date: July 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls when to send the early reply for requests that are - about to timeout as an offset to the estimated service time in - seconds.. - Default: 5 - -What: /sys/fs/lustre/at_history -Date: July 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls for how many seconds to remember slowest events - encountered by adaptive timeouts code. - Default: 600 - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/blocksize -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Biggest blocksize on object storage server for this filesystem. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/kbytestotal -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows total number of kilobytes of space on this filesystem - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/kbytesfree -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows total number of free kilobytes of space on this filesystem - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/kbytesavail -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows total number of free kilobytes of space on this filesystem - actually available for use (taking into account per-client - grants and filesystem reservations). - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/filestotal -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows total number of inodes on the filesystem. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/filesfree -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows estimated number of free inodes on the filesystem - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/client_type -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows whenever this filesystem considers this client to be - compute cluster-local or remote. Remote clients have - additional uid/gid convrting logic applied. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/fstype -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows filesystem type of the filesystem - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/uuid -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows this filesystem superblock uuid - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/max_read_ahead_mb -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Sets maximum number of megabytes in system memory to be - given to read-ahead cache. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/max_read_ahead_per_file_mb -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Sets maximum number of megabytes to read-ahead for a single file - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/max_read_ahead_whole_mb -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - For small reads, how many megabytes to actually request from - the server as initial read-ahead. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/checksum_pages -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Enables or disables per-page checksum at llite layer, before - the pages are actually given to lower level for network transfer - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/stats_track_pid -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Limit Lustre vfs operations gathering to just a single pid. - 0 to track everything. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/stats_track_ppid -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Limit Lustre vfs operations gathering to just a single ppid. - 0 to track everything. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/stats_track_gid -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Limit Lustre vfs operations gathering to just a single gid. - 0 to track everything. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/statahead_max -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls maximum number of statahead requests to send when - sequential readdir+stat pattern is detected. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/statahead_agl -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls if AGL (async glimpse ahead - obtain object information - from OSTs in parallel with MDS during statahead) should be - enabled or disabled. - 0 to disable, 1 to enable. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/lazystatfs -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls statfs(2) behaviour in the face of down servers. - If 0, always wait for all servers to come online, - if 1, ignote inactive servers. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/max_easize -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows maximum number of bytes file striping data could be - in current configuration of storage. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/default_easize -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows maximum observed file striping data seen by this - filesystem client instance. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/xattr_cache -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls extended attributes client-side cache. - 1 to enable, 0 to disable. - -What: /sys/fs/lustre/llite/<fsname>-<uuid>/unstable_stats -Date: Apr 2016 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows number of pages that were sent and acknowledged by - server but were not yet committed and therefore still - pinned in client memory even though no longer dirty. - -What: /sys/fs/lustre/ldlm/cancel_unused_locks_before_replay -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls if client should replay unused locks during recovery - If a client tends to have a lot of unused locks in LRU, - recovery times might become prolonged. - 1 - just locally cancel unused locks (default) - 0 - replay unused locks. - -What: /sys/fs/lustre/ldlm/namespaces/<name>/resource_count -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Displays number of lock resources (objects on which individual - locks are taken) currently allocated in this namespace. - -What: /sys/fs/lustre/ldlm/namespaces/<name>/lock_count -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Displays number or locks allocated in this namespace. - -What: /sys/fs/lustre/ldlm/namespaces/<name>/lru_size -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls and displays LRU size limit for unused locks for this - namespace. - 0 - LRU size is unlimited, controlled by server resources - positive number - number of locks to allow in lock LRU list - -What: /sys/fs/lustre/ldlm/namespaces/<name>/lock_unused_count -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Display number of locks currently sitting in the LRU list - of this namespace - -What: /sys/fs/lustre/ldlm/namespaces/<name>/lru_max_age -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Maximum number of milliseconds a lock could sit in LRU list - before client would voluntarily cancel it as unused. - -What: /sys/fs/lustre/ldlm/namespaces/<name>/early_lock_cancel -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls "early lock cancellation" feature on this namespace - if supported by the server. - When enabled, tries to preemtively cancel locks that would be - cancelled by verious operations and bundle the cancellation - requests in the same RPC as the main operation, which results - in significant speedups due to reduced lock-pingpong RPCs. - 0 - disabled - 1 - enabled (default) - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/granted -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Displays number of granted locks in this namespace - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/grant_rate -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of granted locks in this namespace during last - time interval - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/cancel_rate -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of lock cancellations in this namespace during - last time interval - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/grant_speed -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Calculated speed of lock granting (grant_rate - cancel_rate) - in this namespace - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/grant_plan -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Estimated number of locks to be granted in the next time - interval in this namespace - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/limit -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls number of allowed locks in this pool. - When lru_size is 0, this is the actual limit then. - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/lock_volume_factor -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Multiplier for all lock volume calculations above. - Default is 1. Increase to make the client to more agressively - clean it's lock LRU list for this namespace. - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/server_lock_volume -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Calculated server lock volume. - -What: /sys/fs/lustre/ldlm/namespaces/<name>/pool/recalc_period -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls length of time between recalculation of above - values (in seconds). - -What: /sys/fs/lustre/ldlm/services/ldlm_cbd/threads_min -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls minimum number of ldlm callback threads to start. - -What: /sys/fs/lustre/ldlm/services/ldlm_cbd/threads_max -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls maximum number of ldlm callback threads to start. - -What: /sys/fs/lustre/ldlm/services/ldlm_cbd/threads_started -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows actual number of ldlm callback threads running. - -What: /sys/fs/lustre/ldlm/services/ldlm_cbd/high_priority_ratio -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls what percentage of ldlm callback threads is dedicated - to "high priority" incoming requests. - -What: /sys/fs/lustre/{obdtype}/{connection_name}/blocksize -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Blocksize on backend filesystem for service behind this obd - device (or biggest blocksize for compound devices like lov - and lmv) - -What: /sys/fs/lustre/{obdtype}/{connection_name}/kbytestotal -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Total number of kilobytes of space on backend filesystem - for service behind this obd (or total amount for compound - devices like lov lmv) - -What: /sys/fs/lustre/{obdtype}/{connection_name}/kbytesfree -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of free kilobytes on backend filesystem for service - behind this obd (or total amount for compound devices - like lov lmv) - -What: /sys/fs/lustre/{obdtype}/{connection_name}/kbytesavail -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of kilobytes of free space on backend filesystem - for service behind this obd (or total amount for compound - devices like lov lmv) that is actually available for use - (taking into account per-client and filesystem reservations). - -What: /sys/fs/lustre/{obdtype}/{connection_name}/filestotal -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of inodes on backend filesystem for service behind this - obd. - -What: /sys/fs/lustre/{obdtype}/{connection_name}/filesfree -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of free inodes on backend filesystem for service - behind this obd. - -What: /sys/fs/lustre/mdc/{connection_name}/max_pages_per_rpc -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Maximum number of readdir pages to fit into a single readdir - RPC. - -What: /sys/fs/lustre/{mdc,osc}/{connection_name}/max_rpcs_in_flight -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Maximum number of parallel RPCs on the wire to allow on - this connection. Increasing this number would help on higher - latency links, but has a chance of overloading a server - if you have too many clients like this. - Default: 8 - -What: /sys/fs/lustre/osc/{connection_name}/max_pages_per_rpc -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Maximum number of pages to fit into a single RPC. - Typically bigger RPCs allow for better performance. - Default: however many pages to form 1M of data (256 pages - for 4K page sized platforms) - -What: /sys/fs/lustre/osc/{connection_name}/active -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls accessibility of this connection. If set to 0, - fail all accesses immediately. - -What: /sys/fs/lustre/osc/{connection_name}/checksums -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls whenever to checksum bulk RPC data over the wire - to this target. - 1: enable (default) ; 0: disable - -What: /sys/fs/lustre/osc/{connection_name}/contention_seconds -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls for how long to consider a file contended once - indicated as such by the server. - When a file is considered contended, all operations switch to - synchronous lockless mode to avoid cache and lock pingpong. - -What: /sys/fs/lustre/osc/{connection_name}/cur_dirty_bytes -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Displays how many dirty bytes is presently in the cache for this - target. - -What: /sys/fs/lustre/osc/{connection_name}/cur_grant_bytes -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows how many bytes we have as a "dirty cache" grant from the - server. Writing a value smaller than shown allows to release - some grant back to the server. - Dirty cache grant is a way Lustre ensures that cached successful - writes on client do not end up discarded by the server due to - lack of space later on. - -What: /sys/fs/lustre/osc/{connection_name}/cur_lost_grant_bytes -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Shows how many granted bytes were released to the server due - to lack of write activity on this client. - -What: /sys/fs/lustre/osc/{connection_name}/grant_shrink_interval -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of seconds with no write activity for this target - to start releasing dirty grant back to the server. - -What: /sys/fs/lustre/osc/{connection_name}/destroys_in_flight -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of DESTROY RPCs currently in flight to this target. - -What: /sys/fs/lustre/osc/{connection_name}/lockless_truncate -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls whether lockless truncate RPCs are allowed to this - target. - Lockless truncate causes server to perform the locking which - is beneficial if the truncate is not followed by a write - immediately. - 1: enable ; 0: disable (default) - -What: /sys/fs/lustre/osc/{connection_name}/max_dirty_mb -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls how much dirty data this client can accumulate - for this target. This is orthogonal to dirty grant and is - a hard limit even if the server would allow a bigger dirty - cache. - While allowing higher dirty cache is beneficial for write - performance, flushing write cache takes longer and as such - the node might be more prone to OOMs. - Having this value set too low might result in not being able - to sent too many parallel WRITE RPCs. - Default: 32 - -What: /sys/fs/lustre/osc/{connection_name}/resend_count -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Controls how many times to try and resend RPCs to this target - that failed with "recoverable" status, such as EAGAIN, - ENOMEM. - -What: /sys/fs/lustre/lov/{connection_name}/numobd -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of OSC targets managed by this LOV instance. - -What: /sys/fs/lustre/lov/{connection_name}/activeobd -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of OSC targets managed by this LOV instance that are - actually active. - -What: /sys/fs/lustre/lmv/{connection_name}/numobd -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of MDC targets managed by this LMV instance. - -What: /sys/fs/lustre/lmv/{connection_name}/activeobd -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Number of MDC targets managed by this LMV instance that are - actually active. - -What: /sys/fs/lustre/lmv/{connection_name}/placement -Date: May 2015 -Contact: "Oleg Drokin" <oleg.drokin@intel.com> -Description: - Determines policy of inode placement in case of multiple - metadata servers: - CHAR - based on a hash of the file name used at creation time - (Default) - NID - based on a hash of creating client network id. |