summaryrefslogtreecommitdiff
path: root/drivers/ufs/host/ufs-qcom.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ufs/host/ufs-qcom.c')
-rw-r--r--drivers/ufs/host/ufs-qcom.c1543
1 files changed, 1543 insertions, 0 deletions
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
new file mode 100644
index 000000000000..f10d4668814c
--- /dev/null
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -0,0 +1,1543 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2013-2016, Linux Foundation. All rights reserved.
+ */
+
+#include <linux/acpi.h>
+#include <linux/time.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/gpio/consumer.h>
+#include <linux/reset-controller.h>
+#include <linux/devfreq.h>
+
+#include <ufs/ufshcd.h>
+#include "ufshcd-pltfrm.h"
+#include <ufs/unipro.h>
+#include "ufs-qcom.h"
+#include <ufs/ufshci.h>
+#include <ufs/ufs_quirks.h>
+
+#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
+ (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
+
+enum {
+ TSTBUS_UAWM,
+ TSTBUS_UARM,
+ TSTBUS_TXUC,
+ TSTBUS_RXUC,
+ TSTBUS_DFC,
+ TSTBUS_TRLUT,
+ TSTBUS_TMRLUT,
+ TSTBUS_OCSC,
+ TSTBUS_UTP_HCI,
+ TSTBUS_COMBINED,
+ TSTBUS_WRAPPER,
+ TSTBUS_UNIPRO,
+ TSTBUS_MAX,
+};
+
+static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS];
+
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host);
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles);
+
+static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd)
+{
+ return container_of(rcd, struct ufs_qcom_host, rcdev);
+}
+
+static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len,
+ const char *prefix, void *priv)
+{
+ ufshcd_dump_regs(hba, offset, len * 4, prefix);
+}
+
+static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes)
+{
+ int err = 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes);
+ if (err)
+ dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n",
+ __func__, err);
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_get(struct device *dev,
+ const char *name, struct clk **clk_out, bool optional)
+{
+ struct clk *clk;
+ int err = 0;
+
+ clk = devm_clk_get(dev, name);
+ if (!IS_ERR(clk)) {
+ *clk_out = clk;
+ return 0;
+ }
+
+ err = PTR_ERR(clk);
+
+ if (optional && err == -ENOENT) {
+ *clk_out = NULL;
+ return 0;
+ }
+
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "failed to get %s err %d\n", name, err);
+
+ return err;
+}
+
+static int ufs_qcom_host_clk_enable(struct device *dev,
+ const char *name, struct clk *clk)
+{
+ int err = 0;
+
+ err = clk_prepare_enable(clk);
+ if (err)
+ dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err);
+
+ return err;
+}
+
+static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host)
+{
+ if (!host->is_lane_clks_enabled)
+ return;
+
+ clk_disable_unprepare(host->tx_l1_sync_clk);
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+
+ host->is_lane_clks_enabled = false;
+}
+
+static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ if (host->is_lane_clks_enabled)
+ return 0;
+
+ err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk",
+ host->rx_l0_sync_clk);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk",
+ host->tx_l0_sync_clk);
+ if (err)
+ goto disable_rx_l0;
+
+ err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk",
+ host->rx_l1_sync_clk);
+ if (err)
+ goto disable_tx_l0;
+
+ err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk",
+ host->tx_l1_sync_clk);
+ if (err)
+ goto disable_rx_l1;
+
+ host->is_lane_clks_enabled = true;
+ goto out;
+
+disable_rx_l1:
+ clk_disable_unprepare(host->rx_l1_sync_clk);
+disable_tx_l0:
+ clk_disable_unprepare(host->tx_l0_sync_clk);
+disable_rx_l0:
+ clk_disable_unprepare(host->rx_l0_sync_clk);
+out:
+ return err;
+}
+
+static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host)
+{
+ int err = 0;
+ struct device *dev = host->hba->dev;
+
+ if (has_acpi_companion(dev))
+ return 0;
+
+ err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk",
+ &host->rx_l0_sync_clk, false);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk",
+ &host->tx_l0_sync_clk, false);
+ if (err)
+ goto out;
+
+ /* In case of single lane per direction, don't read lane1 clocks */
+ if (host->hba->lanes_per_direction > 1) {
+ err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk",
+ &host->rx_l1_sync_clk, false);
+ if (err)
+ goto out;
+
+ err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk",
+ &host->tx_l1_sync_clk, true);
+ }
+out:
+ return err;
+}
+
+static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba)
+{
+ u32 tx_lanes;
+
+ return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes);
+}
+
+static int ufs_qcom_check_hibern8(struct ufs_hba *hba)
+{
+ int err;
+ u32 tx_fsm_val = 0;
+ unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
+ if (err || tx_fsm_val == TX_FSM_HIBERN8)
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout))
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE,
+ UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)),
+ &tx_fsm_val);
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+ __func__, err);
+ } else if (tx_fsm_val != TX_FSM_HIBERN8) {
+ err = tx_fsm_val;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n",
+ __func__, err);
+ }
+
+ return err;
+}
+
+static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host)
+{
+ ufshcd_rmwl(host->hba, QUNIPRO_SEL,
+ ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0,
+ REG_UFS_CFG1);
+ /* make sure above configuration is applied before we return */
+ mb();
+}
+
+/*
+ * ufs_qcom_host_reset - reset host controller and PHY
+ */
+static int ufs_qcom_host_reset(struct ufs_hba *hba)
+{
+ int ret = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ bool reenable_intr = false;
+
+ if (!host->core_reset) {
+ dev_warn(hba->dev, "%s: reset control not set\n", __func__);
+ goto out;
+ }
+
+ reenable_intr = hba->is_irq_enabled;
+ disable_irq(hba->irq);
+ hba->is_irq_enabled = false;
+
+ ret = reset_control_assert(host->core_reset);
+ if (ret) {
+ dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ /*
+ * The hardware requirement for delay between assert/deassert
+ * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
+ * ~125us (4/32768). To be on the safe side add 200us delay.
+ */
+ usleep_range(200, 210);
+
+ ret = reset_control_deassert(host->core_reset);
+ if (ret)
+ dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n",
+ __func__, ret);
+
+ usleep_range(1000, 1100);
+
+ if (reenable_intr) {
+ enable_irq(hba->irq);
+ hba->is_irq_enabled = true;
+ }
+
+out:
+ return ret;
+}
+
+static int ufs_qcom_power_up_sequence(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ int ret = 0;
+ bool is_rate_B = UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B;
+
+ /* Reset UFS Host Controller and PHY */
+ ret = ufs_qcom_host_reset(hba);
+ if (ret)
+ dev_warn(hba->dev, "%s: host reset returned %d\n",
+ __func__, ret);
+
+ if (is_rate_B)
+ phy_set_mode(phy, PHY_MODE_UFS_HS_B);
+
+ /* phy initialization - calibrate the phy */
+ ret = phy_init(phy);
+ if (ret) {
+ dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ /* power on phy - start serdes and phy's power and clocks */
+ ret = phy_power_on(phy);
+ if (ret) {
+ dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
+ __func__, ret);
+ goto out_disable_phy;
+ }
+
+ ufs_qcom_select_unipro_mode(host);
+
+ return 0;
+
+out_disable_phy:
+ phy_exit(phy);
+out:
+ return ret;
+}
+
+/*
+ * The UTP controller has a number of internal clock gating cells (CGCs).
+ * Internal hardware sub-modules within the UTP controller control the CGCs.
+ * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved
+ * in a specific operation, UTP controller CGCs are by default disabled and
+ * this function enables them (after every UFS link startup) to save some power
+ * leakage.
+ */
+static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba)
+{
+ ufshcd_writel(hba,
+ ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL,
+ REG_UFS_CFG2);
+
+ /* Ensure that HW clock gating is enabled before next operations */
+ mb();
+}
+
+static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_qcom_power_up_sequence(hba);
+ /*
+ * The PHY PLL output is the source of tx/rx lane symbol
+ * clocks, hence, enable the lane clocks only after PHY
+ * is initialized.
+ */
+ err = ufs_qcom_enable_lane_clks(host);
+ break;
+ case POST_CHANGE:
+ /* check if UFS PHY moved from DISABLED to HIBERN8 */
+ err = ufs_qcom_check_hibern8(hba);
+ ufs_qcom_enable_hw_clk_gating(hba);
+ ufs_qcom_ice_enable(host);
+ break;
+ default:
+ dev_err(hba->dev, "%s: invalid status %d\n", __func__, status);
+ err = -EINVAL;
+ break;
+ }
+ return err;
+}
+
+/*
+ * Returns zero for success and non-zero in case of a failure
+ */
+static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
+ u32 hs, u32 rate, bool update_link_startup_timer)
+{
+ int ret = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufs_clk_info *clki;
+ u32 core_clk_period_in_ns;
+ u32 tx_clk_cycles_per_us = 0;
+ unsigned long core_clk_rate = 0;
+ u32 core_clk_cycles_per_us = 0;
+
+ static u32 pwm_fr_table[][2] = {
+ {UFS_PWM_G1, 0x1},
+ {UFS_PWM_G2, 0x1},
+ {UFS_PWM_G3, 0x1},
+ {UFS_PWM_G4, 0x1},
+ };
+
+ static u32 hs_fr_table_rA[][2] = {
+ {UFS_HS_G1, 0x1F},
+ {UFS_HS_G2, 0x3e},
+ {UFS_HS_G3, 0x7D},
+ };
+
+ static u32 hs_fr_table_rB[][2] = {
+ {UFS_HS_G1, 0x24},
+ {UFS_HS_G2, 0x49},
+ {UFS_HS_G3, 0x92},
+ };
+
+ /*
+ * The Qunipro controller does not use following registers:
+ * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
+ * UFS_REG_PA_LINK_STARTUP_TIMER
+ * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
+ * Aggregation logic.
+ */
+ if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
+ goto out;
+
+ if (gear == 0) {
+ dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear);
+ goto out_error;
+ }
+
+ list_for_each_entry(clki, &hba->clk_list_head, list) {
+ if (!strcmp(clki->name, "core_clk"))
+ core_clk_rate = clk_get_rate(clki->clk);
+ }
+
+ /* If frequency is smaller than 1MHz, set to 1MHz */
+ if (core_clk_rate < DEFAULT_CLK_RATE_HZ)
+ core_clk_rate = DEFAULT_CLK_RATE_HZ;
+
+ core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC;
+ if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) {
+ ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (ufs_qcom_cap_qunipro(host))
+ goto out;
+
+ core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate;
+ core_clk_period_in_ns <<= OFFSET_CLK_NS_REG;
+ core_clk_period_in_ns &= MASK_CLK_NS_REG;
+
+ switch (hs) {
+ case FASTAUTO_MODE:
+ case FAST_MODE:
+ if (rate == PA_HS_MODE_A) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rA)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rA));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1];
+ } else if (rate == PA_HS_MODE_B) {
+ if (gear > ARRAY_SIZE(hs_fr_table_rB)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(hs_fr_table_rB));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1];
+ } else {
+ dev_err(hba->dev, "%s: invalid rate = %d\n",
+ __func__, rate);
+ goto out_error;
+ }
+ break;
+ case SLOWAUTO_MODE:
+ case SLOW_MODE:
+ if (gear > ARRAY_SIZE(pwm_fr_table)) {
+ dev_err(hba->dev,
+ "%s: index %d exceeds table size %zu\n",
+ __func__, gear,
+ ARRAY_SIZE(pwm_fr_table));
+ goto out_error;
+ }
+ tx_clk_cycles_per_us = pwm_fr_table[gear-1][1];
+ break;
+ case UNCHANGED:
+ default:
+ dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs);
+ goto out_error;
+ }
+
+ if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) !=
+ (core_clk_period_in_ns | tx_clk_cycles_per_us)) {
+ /* this register 2 fields shall be written at once */
+ ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us,
+ REG_UFS_TX_SYMBOL_CLK_NS_US);
+ /*
+ * make sure above write gets applied before we return from
+ * this function.
+ */
+ mb();
+ }
+
+ if (update_link_startup_timer) {
+ ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
+ REG_UFS_PA_LINK_STARTUP_TIMER);
+ /*
+ * make sure that this configuration is applied before
+ * we return
+ */
+ mb();
+ }
+ goto out;
+
+out_error:
+ ret = -EINVAL;
+out:
+ return ret;
+}
+
+static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ switch (status) {
+ case PRE_CHANGE:
+ if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
+ 0, true)) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+ __func__);
+ err = -EINVAL;
+ goto out;
+ }
+
+ if (ufs_qcom_cap_qunipro(host))
+ /*
+ * set unipro core clock cycles to 150 & clear clock
+ * divider
+ */
+ err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba,
+ 150);
+
+ /*
+ * Some UFS devices (and may be host) have issues if LCC is
+ * enabled. So we are setting PA_Local_TX_LCC_Enable to 0
+ * before link startup which will make sure that both host
+ * and device TX LCC are disabled once link startup is
+ * completed.
+ */
+ if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41)
+ err = ufshcd_disable_host_tx_lcc(hba);
+
+ break;
+ case POST_CHANGE:
+ ufs_qcom_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+out:
+ return err;
+}
+
+static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ /* reset gpio is optional */
+ if (!host->device_reset)
+ return;
+
+ gpiod_set_value_cansleep(host->device_reset, asserted);
+}
+
+static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op,
+ enum ufs_notify_change_status status)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+
+ if (status == PRE_CHANGE)
+ return 0;
+
+ if (ufs_qcom_is_link_off(hba)) {
+ /*
+ * Disable the tx/rx lane symbol clocks before PHY is
+ * powered down as the PLL source should be disabled
+ * after downstream clocks are disabled.
+ */
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(phy);
+
+ /* reset the connected UFS device during power down */
+ ufs_qcom_device_reset_ctrl(hba, true);
+
+ } else if (!ufs_qcom_is_link_active(hba)) {
+ ufs_qcom_disable_lane_clks(host);
+ }
+
+ return 0;
+}
+
+static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct phy *phy = host->generic_phy;
+ int err;
+
+ if (ufs_qcom_is_link_off(hba)) {
+ err = phy_power_on(phy);
+ if (err) {
+ dev_err(hba->dev, "%s: failed PHY power on: %d\n",
+ __func__, err);
+ return err;
+ }
+
+ err = ufs_qcom_enable_lane_clks(host);
+ if (err)
+ return err;
+
+ } else if (!ufs_qcom_is_link_active(hba)) {
+ err = ufs_qcom_enable_lane_clks(host);
+ if (err)
+ return err;
+ }
+
+ return ufs_qcom_ice_resume(host);
+}
+
+static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable)
+{
+ if (host->dev_ref_clk_ctrl_mmio &&
+ (enable ^ host->is_dev_ref_clk_enabled)) {
+ u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio);
+
+ if (enable)
+ temp |= host->dev_ref_clk_en_mask;
+ else
+ temp &= ~host->dev_ref_clk_en_mask;
+
+ /*
+ * If we are here to disable this clock it might be immediately
+ * after entering into hibern8 in which case we need to make
+ * sure that device ref_clk is active for specific time after
+ * hibern8 enter.
+ */
+ if (!enable) {
+ unsigned long gating_wait;
+
+ gating_wait = host->hba->dev_info.clk_gating_wait_us;
+ if (!gating_wait) {
+ udelay(1);
+ } else {
+ /*
+ * bRefClkGatingWaitTime defines the minimum
+ * time for which the reference clock is
+ * required by device during transition from
+ * HS-MODE to LS-MODE or HIBERN8 state. Give it
+ * more delay to be on the safe side.
+ */
+ gating_wait += 10;
+ usleep_range(gating_wait, gating_wait + 10);
+ }
+ }
+
+ writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio);
+
+ /*
+ * Make sure the write to ref_clk reaches the destination and
+ * not stored in a Write Buffer (WB).
+ */
+ readl(host->dev_ref_clk_ctrl_mmio);
+
+ /*
+ * If we call hibern8 exit after this, we need to make sure that
+ * device ref_clk is stable for at least 1us before the hibern8
+ * exit command.
+ */
+ if (enable)
+ udelay(1);
+
+ host->is_dev_ref_clk_enabled = enable;
+ }
+}
+
+static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufs_dev_params ufs_qcom_cap;
+ int ret = 0;
+
+ if (!dev_req_params) {
+ pr_err("%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufshcd_init_pwr_dev_param(&ufs_qcom_cap);
+ ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE;
+
+ if (host->hw_ver.major == 0x1) {
+ /*
+ * HS-G3 operations may not reliably work on legacy QCOM
+ * UFS host controller hardware even though capability
+ * exchange during link startup phase may end up
+ * negotiating maximum supported gear as G3.
+ * Hence downgrade the maximum supported gear to HS-G2.
+ */
+ if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_tx_gear = UFS_HS_G2;
+ if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2)
+ ufs_qcom_cap.hs_rx_gear = UFS_HS_G2;
+ }
+
+ ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap,
+ dev_max_params,
+ dev_req_params);
+ if (ret) {
+ pr_err("%s: failed to determine capabilities\n",
+ __func__);
+ goto out;
+ }
+
+ /* enable the device ref clock before changing to HS mode */
+ if (!ufshcd_is_hs_mode(&hba->pwr_info) &&
+ ufshcd_is_hs_mode(dev_req_params))
+ ufs_qcom_dev_ref_clk_ctrl(host, true);
+
+ if (host->hw_ver.major >= 0x4) {
+ ufshcd_dme_configure_adapt(hba,
+ dev_req_params->gear_tx,
+ PA_INITIAL_ADAPT);
+ }
+ break;
+ case POST_CHANGE:
+ if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate, false)) {
+ dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
+ __func__);
+ /*
+ * we return error code at the end of the routine,
+ * but continue to configure UFS_PHY_TX_LANE_ENABLE
+ * and bus voting as usual
+ */
+ ret = -EINVAL;
+ }
+
+ /* cache the power mode parameters to use internally */
+ memcpy(&host->dev_req_params,
+ dev_req_params, sizeof(*dev_req_params));
+
+ /* disable the device ref clock if entered PWM mode */
+ if (ufshcd_is_hs_mode(&hba->pwr_info) &&
+ !ufshcd_is_hs_mode(dev_req_params))
+ ufs_qcom_dev_ref_clk_ctrl(host, false);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
+{
+ int err;
+ u32 pa_vs_config_reg1;
+
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ &pa_vs_config_reg1);
+ if (err)
+ goto out;
+
+ /* Allow extension of MSB bits of PA_SaveConfigTime attribute */
+ err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
+ (pa_vs_config_reg1 | (1 << 12)));
+
+out:
+ return err;
+}
+
+static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
+{
+ int err = 0;
+
+ if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
+ err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
+
+ if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC)
+ hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE;
+
+ return err;
+}
+
+static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (host->hw_ver.major == 0x1)
+ return ufshci_version(1, 1);
+ else
+ return ufshci_version(2, 0);
+}
+
+/**
+ * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks
+ * @hba: host controller instance
+ *
+ * QCOM UFS host controller might have some non standard behaviours (quirks)
+ * than what is specified by UFSHCI specification. Advertise all such
+ * quirks to standard UFS host controller driver so standard takes them into
+ * account.
+ */
+static void ufs_qcom_advertise_quirks(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (host->hw_ver.major == 0x01) {
+ hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
+ | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP
+ | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE;
+
+ if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001)
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR;
+
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC;
+ }
+
+ if (host->hw_ver.major == 0x2) {
+ hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION;
+
+ if (!ufs_qcom_cap_qunipro(host))
+ /* Legacy UniPro mode still need following quirks */
+ hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS
+ | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE
+ | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP);
+ }
+}
+
+static void ufs_qcom_set_caps(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
+ hba->caps |= UFSHCD_CAP_CLK_SCALING;
+ hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
+ hba->caps |= UFSHCD_CAP_WB_EN;
+ hba->caps |= UFSHCD_CAP_CRYPTO;
+ hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE;
+ hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND;
+
+ if (host->hw_ver.major >= 0x2) {
+ host->caps = UFS_QCOM_CAP_QUNIPRO |
+ UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE;
+ }
+}
+
+/**
+ * ufs_qcom_setup_clocks - enables/disable clocks
+ * @hba: host controller instance
+ * @on: If true, enable clocks else disable them.
+ * @status: PRE_CHANGE or POST_CHANGE notify
+ *
+ * Returns 0 on success, non-zero on failure.
+ */
+static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on,
+ enum ufs_notify_change_status status)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ /*
+ * In case ufs_qcom_init() is not yet done, simply ignore.
+ * This ufs_qcom_setup_clocks() shall be called from
+ * ufs_qcom_init() after init is done.
+ */
+ if (!host)
+ return 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ if (!on) {
+ if (!ufs_qcom_is_link_active(hba)) {
+ /* disable device ref_clk */
+ ufs_qcom_dev_ref_clk_ctrl(host, false);
+ }
+ }
+ break;
+ case POST_CHANGE:
+ if (on) {
+ /* enable the device ref clock for HS mode*/
+ if (ufshcd_is_hs_mode(&hba->pwr_info))
+ ufs_qcom_dev_ref_clk_ctrl(host, true);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int
+ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
+
+ /* Currently this code only knows about a single reset. */
+ WARN_ON(id);
+ ufs_qcom_assert_reset(host->hba);
+ /* provide 1ms delay to let the reset pulse propagate. */
+ usleep_range(1000, 1100);
+ return 0;
+}
+
+static int
+ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev);
+
+ /* Currently this code only knows about a single reset. */
+ WARN_ON(id);
+ ufs_qcom_deassert_reset(host->hba);
+
+ /*
+ * after reset deassertion, phy will need all ref clocks,
+ * voltage, current to settle down before starting serdes.
+ */
+ usleep_range(1000, 1100);
+ return 0;
+}
+
+static const struct reset_control_ops ufs_qcom_reset_ops = {
+ .assert = ufs_qcom_reset_assert,
+ .deassert = ufs_qcom_reset_deassert,
+};
+
+/**
+ * ufs_qcom_init - bind phy with controller
+ * @hba: host controller instance
+ *
+ * Binds PHY with controller and powers up PHY enabling clocks
+ * and regulators.
+ *
+ * Returns -EPROBE_DEFER if binding fails, returns negative error
+ * on phy power up failure and returns zero on success.
+ */
+static int ufs_qcom_init(struct ufs_hba *hba)
+{
+ int err;
+ struct device *dev = hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ufs_qcom_host *host;
+ struct resource *res;
+ struct ufs_clk_info *clki;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host) {
+ err = -ENOMEM;
+ dev_err(dev, "%s: no memory for qcom ufs host\n", __func__);
+ goto out;
+ }
+
+ /* Make a two way bind between the qcom host and the hba */
+ host->hba = hba;
+ ufshcd_set_variant(hba, host);
+
+ /* Setup the optional reset control of HCI */
+ host->core_reset = devm_reset_control_get_optional(hba->dev, "rst");
+ if (IS_ERR(host->core_reset)) {
+ err = dev_err_probe(dev, PTR_ERR(host->core_reset),
+ "Failed to get reset control\n");
+ goto out_variant_clear;
+ }
+
+ /* Fire up the reset controller. Failure here is non-fatal. */
+ host->rcdev.of_node = dev->of_node;
+ host->rcdev.ops = &ufs_qcom_reset_ops;
+ host->rcdev.owner = dev->driver->owner;
+ host->rcdev.nr_resets = 1;
+ err = devm_reset_controller_register(dev, &host->rcdev);
+ if (err) {
+ dev_warn(dev, "Failed to register reset controller\n");
+ err = 0;
+ }
+
+ if (!has_acpi_companion(dev)) {
+ host->generic_phy = devm_phy_get(dev, "ufsphy");
+ if (IS_ERR(host->generic_phy)) {
+ err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n");
+ goto out_variant_clear;
+ }
+ }
+
+ host->device_reset = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(host->device_reset)) {
+ err = PTR_ERR(host->device_reset);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "failed to acquire reset gpio: %d\n", err);
+ goto out_variant_clear;
+ }
+
+ ufs_qcom_get_controller_revision(hba, &host->hw_ver.major,
+ &host->hw_ver.minor, &host->hw_ver.step);
+
+ /*
+ * for newer controllers, device reference clock control bit has
+ * moved inside UFS controller register address space itself.
+ */
+ if (host->hw_ver.major >= 0x02) {
+ host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1;
+ host->dev_ref_clk_en_mask = BIT(26);
+ } else {
+ /* "dev_ref_clk_ctrl_mem" is optional resource */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "dev_ref_clk_ctrl_mem");
+ if (res) {
+ host->dev_ref_clk_ctrl_mmio =
+ devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->dev_ref_clk_ctrl_mmio))
+ host->dev_ref_clk_ctrl_mmio = NULL;
+ host->dev_ref_clk_en_mask = BIT(5);
+ }
+ }
+
+ list_for_each_entry(clki, &hba->clk_list_head, list) {
+ if (!strcmp(clki->name, "core_clk_unipro"))
+ clki->keep_link_active = true;
+ }
+
+ err = ufs_qcom_init_lane_clks(host);
+ if (err)
+ goto out_variant_clear;
+
+ ufs_qcom_set_caps(hba);
+ ufs_qcom_advertise_quirks(hba);
+
+ err = ufs_qcom_ice_init(host);
+ if (err)
+ goto out_variant_clear;
+
+ ufs_qcom_setup_clocks(hba, true, POST_CHANGE);
+
+ if (hba->dev->id < MAX_UFS_QCOM_HOSTS)
+ ufs_qcom_hosts[hba->dev->id] = host;
+
+ host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN;
+ ufs_qcom_get_default_testbus_cfg(host);
+ err = ufs_qcom_testbus_config(host);
+ if (err) {
+ dev_warn(dev, "%s: failed to configure the testbus %d\n",
+ __func__, err);
+ err = 0;
+ }
+
+ goto out;
+
+out_variant_clear:
+ ufshcd_set_variant(hba, NULL);
+out:
+ return err;
+}
+
+static void ufs_qcom_exit(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ ufs_qcom_disable_lane_clks(host);
+ phy_power_off(host->generic_phy);
+ phy_exit(host->generic_phy);
+}
+
+static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba,
+ u32 clk_cycles)
+{
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK)
+ return -EINVAL;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+ if (err)
+ goto out;
+
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK;
+ core_clk_ctrl_reg |= clk_cycles;
+
+ /* Clear CORE_CLK_DIV_EN */
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+out:
+ return err;
+}
+
+static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
+{
+ /* nothing to do as of now */
+ return 0;
+}
+
+static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 150 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150);
+}
+
+static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ int err;
+ u32 core_clk_ctrl_reg;
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ err = ufshcd_dme_get(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ &core_clk_ctrl_reg);
+
+ /* make sure CORE_CLK_DIV_EN is cleared */
+ if (!err &&
+ (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) {
+ core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT;
+ err = ufshcd_dme_set(hba,
+ UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL),
+ core_clk_ctrl_reg);
+ }
+
+ return err;
+}
+
+static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ if (!ufs_qcom_cap_qunipro(host))
+ return 0;
+
+ /* set unipro core clock cycles to 75 and clear clock divider */
+ return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75);
+}
+
+static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
+ bool scale_up, enum ufs_notify_change_status status)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+ struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
+ int err = 0;
+
+ if (status == PRE_CHANGE) {
+ err = ufshcd_uic_hibern8_enter(hba);
+ if (err)
+ return err;
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_pre_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_pre_change(hba);
+ if (err)
+ ufshcd_uic_hibern8_exit(hba);
+
+ } else {
+ if (scale_up)
+ err = ufs_qcom_clk_scale_up_post_change(hba);
+ else
+ err = ufs_qcom_clk_scale_down_post_change(hba);
+
+
+ if (err || !dev_req_params) {
+ ufshcd_uic_hibern8_exit(hba);
+ goto out;
+ }
+
+ ufs_qcom_cfg_timers(hba,
+ dev_req_params->gear_rx,
+ dev_req_params->pwr_rx,
+ dev_req_params->hs_rate,
+ false);
+ ufshcd_uic_hibern8_exit(hba);
+ }
+
+out:
+ return err;
+}
+
+static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba,
+ void *priv, void (*print_fn)(struct ufs_hba *hba,
+ int offset, int num_regs, const char *str, void *priv))
+{
+ u32 reg;
+ struct ufs_qcom_host *host;
+
+ if (unlikely(!hba)) {
+ pr_err("%s: hba is NULL\n", __func__);
+ return;
+ }
+ if (unlikely(!print_fn)) {
+ dev_err(hba->dev, "%s: print_fn is NULL\n", __func__);
+ return;
+ }
+
+ host = ufshcd_get_variant(hba);
+ if (!(host->dbg_print_en & UFS_QCOM_DBG_PRINT_REGS_EN))
+ return;
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC);
+ print_fn(hba, reg, 44, "UFS_UFS_DBG_RD_REG_OCSC ", priv);
+
+ reg = ufshcd_readl(hba, REG_UFS_CFG1);
+ reg |= UTP_DBG_RAMS_EN;
+ ufshcd_writel(hba, reg, REG_UFS_CFG1);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM);
+ print_fn(hba, reg, 32, "UFS_UFS_DBG_RD_EDTL_RAM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM);
+ print_fn(hba, reg, 128, "UFS_UFS_DBG_RD_DESC_RAM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM);
+ print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv);
+
+ /* clear bit 17 - UTP_DBG_RAMS_EN */
+ ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM);
+ print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM);
+ print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UARM ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC);
+ print_fn(hba, reg, 48, "UFS_DBG_RD_REG_TXUC ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC);
+ print_fn(hba, reg, 27, "UFS_DBG_RD_REG_RXUC ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC);
+ print_fn(hba, reg, 19, "UFS_DBG_RD_REG_DFC ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT);
+ print_fn(hba, reg, 34, "UFS_DBG_RD_REG_TRLUT ", priv);
+
+ reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT);
+ print_fn(hba, reg, 9, "UFS_DBG_RD_REG_TMRLUT ", priv);
+}
+
+static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host)
+{
+ if (host->dbg_print_en & UFS_QCOM_DBG_PRINT_TEST_BUS_EN) {
+ ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN,
+ UFS_REG_TEST_BUS_EN, REG_UFS_CFG1);
+ ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1);
+ } else {
+ ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 0, REG_UFS_CFG1);
+ ufshcd_rmwl(host->hba, TEST_BUS_EN, 0, REG_UFS_CFG1);
+ }
+}
+
+static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host)
+{
+ /* provide a legal default configuration */
+ host->testbus.select_major = TSTBUS_UNIPRO;
+ host->testbus.select_minor = 37;
+}
+
+static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host)
+{
+ if (host->testbus.select_major >= TSTBUS_MAX) {
+ dev_err(host->hba->dev,
+ "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n",
+ __func__, host->testbus.select_major);
+ return false;
+ }
+
+ return true;
+}
+
+int ufs_qcom_testbus_config(struct ufs_qcom_host *host)
+{
+ int reg;
+ int offset;
+ u32 mask = TEST_BUS_SUB_SEL_MASK;
+
+ if (!host)
+ return -EINVAL;
+
+ if (!ufs_qcom_testbus_cfg_is_ok(host))
+ return -EPERM;
+
+ switch (host->testbus.select_major) {
+ case TSTBUS_UAWM:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 24;
+ break;
+ case TSTBUS_UARM:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 16;
+ break;
+ case TSTBUS_TXUC:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 8;
+ break;
+ case TSTBUS_RXUC:
+ reg = UFS_TEST_BUS_CTRL_0;
+ offset = 0;
+ break;
+ case TSTBUS_DFC:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 24;
+ break;
+ case TSTBUS_TRLUT:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 16;
+ break;
+ case TSTBUS_TMRLUT:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 8;
+ break;
+ case TSTBUS_OCSC:
+ reg = UFS_TEST_BUS_CTRL_1;
+ offset = 0;
+ break;
+ case TSTBUS_WRAPPER:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 16;
+ break;
+ case TSTBUS_COMBINED:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 8;
+ break;
+ case TSTBUS_UTP_HCI:
+ reg = UFS_TEST_BUS_CTRL_2;
+ offset = 0;
+ break;
+ case TSTBUS_UNIPRO:
+ reg = UFS_UNIPRO_CFG;
+ offset = 20;
+ mask = 0xFFF;
+ break;
+ /*
+ * No need for a default case, since
+ * ufs_qcom_testbus_cfg_is_ok() checks that the configuration
+ * is legal
+ */
+ }
+ mask <<= offset;
+ ufshcd_rmwl(host->hba, TEST_BUS_SEL,
+ (u32)host->testbus.select_major << 19,
+ REG_UFS_CFG1);
+ ufshcd_rmwl(host->hba, mask,
+ (u32)host->testbus.select_minor << offset,
+ reg);
+ ufs_qcom_enable_test_bus(host);
+ /*
+ * Make sure the test bus configuration is
+ * committed before returning.
+ */
+ mb();
+
+ return 0;
+}
+
+static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba)
+{
+ ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4,
+ "HCI Vendor Specific Registers ");
+
+ ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper);
+}
+
+/**
+ * ufs_qcom_device_reset() - toggle the (optional) device reset line
+ * @hba: per-adapter instance
+ *
+ * Toggles the (optional) reset line to reset the attached device.
+ */
+static int ufs_qcom_device_reset(struct ufs_hba *hba)
+{
+ struct ufs_qcom_host *host = ufshcd_get_variant(hba);
+
+ /* reset gpio is optional */
+ if (!host->device_reset)
+ return -EOPNOTSUPP;
+
+ /*
+ * The UFS device shall detect reset pulses of 1us, sleep for 10us to
+ * be on the safe side.
+ */
+ ufs_qcom_device_reset_ctrl(hba, true);
+ usleep_range(10, 15);
+
+ ufs_qcom_device_reset_ctrl(hba, false);
+ usleep_range(10, 15);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
+static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
+ struct devfreq_dev_profile *p,
+ struct devfreq_simple_ondemand_data *d)
+{
+ p->polling_ms = 60;
+ d->upthreshold = 70;
+ d->downdifferential = 5;
+}
+#else
+static void ufs_qcom_config_scaling_param(struct ufs_hba *hba,
+ struct devfreq_dev_profile *p,
+ struct devfreq_simple_ondemand_data *data)
+{
+}
+#endif
+
+/*
+ * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations
+ *
+ * The variant operations configure the necessary controller and PHY
+ * handshake during initialization.
+ */
+static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
+ .name = "qcom",
+ .init = ufs_qcom_init,
+ .exit = ufs_qcom_exit,
+ .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version,
+ .clk_scale_notify = ufs_qcom_clk_scale_notify,
+ .setup_clocks = ufs_qcom_setup_clocks,
+ .hce_enable_notify = ufs_qcom_hce_enable_notify,
+ .link_startup_notify = ufs_qcom_link_startup_notify,
+ .pwr_change_notify = ufs_qcom_pwr_change_notify,
+ .apply_dev_quirks = ufs_qcom_apply_dev_quirks,
+ .suspend = ufs_qcom_suspend,
+ .resume = ufs_qcom_resume,
+ .dbg_register_dump = ufs_qcom_dump_dbg_regs,
+ .device_reset = ufs_qcom_device_reset,
+ .config_scaling_param = ufs_qcom_config_scaling_param,
+ .program_key = ufs_qcom_ice_program_key,
+};
+
+/**
+ * ufs_qcom_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Return zero for success and non-zero for failure
+ */
+static int ufs_qcom_probe(struct platform_device *pdev)
+{
+ int err;
+ struct device *dev = &pdev->dev;
+
+ /* Perform generic probe */
+ err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops);
+ if (err)
+ dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err);
+
+ return err;
+}
+
+/**
+ * ufs_qcom_remove - set driver_data of the device to NULL
+ * @pdev: pointer to platform device handle
+ *
+ * Always returns 0
+ */
+static int ufs_qcom_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ pm_runtime_get_sync(&(pdev)->dev);
+ ufshcd_remove(hba);
+ return 0;
+}
+
+static const struct of_device_id ufs_qcom_of_match[] = {
+ { .compatible = "qcom,ufshc"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ufs_qcom_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id ufs_qcom_acpi_match[] = {
+ { "QCOM24A5" },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match);
+#endif
+
+static const struct dev_pm_ops ufs_qcom_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume)
+ SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL)
+ .prepare = ufshcd_suspend_prepare,
+ .complete = ufshcd_resume_complete,
+};
+
+static struct platform_driver ufs_qcom_pltform = {
+ .probe = ufs_qcom_probe,
+ .remove = ufs_qcom_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-qcom",
+ .pm = &ufs_qcom_pm_ops,
+ .of_match_table = of_match_ptr(ufs_qcom_of_match),
+ .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match),
+ },
+};
+module_platform_driver(ufs_qcom_pltform);
+
+MODULE_LICENSE("GPL v2");