1 files changed, 41 insertions, 52 deletions

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0d89dfa6eef5..aeeec751c53c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -657,6 +657,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action)
 /**
  * dwc3_gadget_calc_tx_fifo_size - calculates the txfifo size value
  * @dwc: pointer to the DWC3 context
+ * @mult: multiplier to be used when calculating the fifo_size
  *
  * Calculates the size value based on the equation below:
  *
@@ -1182,17 +1183,49 @@ static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
 	return trbs_left;
 }
 
-static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
-		dma_addr_t dma, unsigned int length, unsigned int chain,
-		unsigned int node, unsigned int stream_id,
-		unsigned int short_not_ok, unsigned int no_interrupt,
-		unsigned int is_last, bool must_interrupt)
+/**
+ * dwc3_prepare_one_trb - setup one TRB from one request
+ * @dep: endpoint for which this request is prepared
+ * @req: dwc3_request pointer
+ * @trb_length: buffer size of the TRB
+ * @chain: should this TRB be chained to the next?
+ * @node: only for isochronous endpoints. First TRB needs different type.
+ * @use_bounce_buffer: set to use bounce buffer
+ * @must_interrupt: set to interrupt on TRB completion
+ */
+static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned int trb_length,
+		unsigned int chain, unsigned int node, bool use_bounce_buffer,
+		bool must_interrupt)
 {
+	struct dwc3_trb		*trb;
+	dma_addr_t		dma;
+	unsigned int		stream_id = req->request.stream_id;
+	unsigned int		short_not_ok = req->request.short_not_ok;
+	unsigned int		no_interrupt = req->request.no_interrupt;
+	unsigned int		is_last = req->request.is_last;
 	struct dwc3		*dwc = dep->dwc;
 	struct usb_gadget	*gadget = dwc->gadget;
 	enum usb_device_speed	speed = gadget->speed;
 
-	trb->size = DWC3_TRB_SIZE_LENGTH(length);
+	if (use_bounce_buffer)
+		dma = dep->dwc->bounce_addr;
+	else if (req->request.num_sgs > 0)
+		dma = sg_dma_address(req->start_sg);
+	else
+		dma = req->request.dma;
+
+	trb = &dep->trb_pool[dep->trb_enqueue];
+
+	if (!req->trb) {
+		dwc3_gadget_move_started_request(req);
+		req->trb = trb;
+		req->trb_dma = dwc3_trb_dma_offset(dep, trb);
+	}
+
+	req->num_trbs++;
+
+	trb->size = DWC3_TRB_SIZE_LENGTH(trb_length);
 	trb->bpl = lower_32_bits(dma);
 	trb->bph = upper_32_bits(dma);
 
@@ -1232,10 +1265,10 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 				unsigned int mult = 2;
 				unsigned int maxp = usb_endpoint_maxp(ep->desc);
 
-				if (length <= (2 * maxp))
+				if (req->request.length <= (2 * maxp))
 					mult--;
 
-				if (length <= maxp)
+				if (req->request.length <= maxp)
 					mult--;
 
 				trb->size |= DWC3_TRB_SIZE_PCM1(mult);
@@ -1309,50 +1342,6 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb,
 	trace_dwc3_prepare_trb(dep, trb);
 }
 
-/**
- * dwc3_prepare_one_trb - setup one TRB from one request
- * @dep: endpoint for which this request is prepared
- * @req: dwc3_request pointer
- * @trb_length: buffer size of the TRB
- * @chain: should this TRB be chained to the next?
- * @node: only for isochronous endpoints. First TRB needs different type.
- * @use_bounce_buffer: set to use bounce buffer
- * @must_interrupt: set to interrupt on TRB completion
- */
-static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
-		struct dwc3_request *req, unsigned int trb_length,
-		unsigned int chain, unsigned int node, bool use_bounce_buffer,
-		bool must_interrupt)
-{
-	struct dwc3_trb		*trb;
-	dma_addr_t		dma;
-	unsigned int		stream_id = req->request.stream_id;
-	unsigned int		short_not_ok = req->request.short_not_ok;
-	unsigned int		no_interrupt = req->request.no_interrupt;
-	unsigned int		is_last = req->request.is_last;
-
-	if (use_bounce_buffer)
-		dma = dep->dwc->bounce_addr;
-	else if (req->request.num_sgs > 0)
-		dma = sg_dma_address(req->start_sg);
-	else
-		dma = req->request.dma;
-
-	trb = &dep->trb_pool[dep->trb_enqueue];
-
-	if (!req->trb) {
-		dwc3_gadget_move_started_request(req);
-		req->trb = trb;
-		req->trb_dma = dwc3_trb_dma_offset(dep, trb);
-	}
-
-	req->num_trbs++;
-
-	__dwc3_prepare_one_trb(dep, trb, dma, trb_length, chain, node,
-			stream_id, short_not_ok, no_interrupt, is_last,
-			must_interrupt);
-}
-
 static bool dwc3_needs_extra_trb(struct dwc3_ep *dep, struct dwc3_request *req)
 {
 	unsigned int maxp = usb_endpoint_maxp(dep->endpoint.desc);