diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/pinctrl/pinctrl-at91-pio4.c | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c index 36c6078b93b3..781f46ab7b10 100644 --- a/drivers/pinctrl/pinctrl-at91-pio4.c +++ b/drivers/pinctrl/pinctrl-at91-pio4.c @@ -36,6 +36,7 @@ #define ATMEL_PIO_DIR_MASK BIT(8) #define ATMEL_PIO_PUEN_MASK BIT(9) #define ATMEL_PIO_PDEN_MASK BIT(10) +#define ATMEL_PIO_SR_MASK BIT(11) #define ATMEL_PIO_IFEN_MASK BIT(12) #define ATMEL_PIO_IFSCEN_MASK BIT(13) #define ATMEL_PIO_OPD_MASK BIT(14) @@ -76,10 +77,12 @@ * @nbanks: number of PIO banks * @last_bank_count: number of lines in the last bank (can be less than * the rest of the banks). + * @slew_rate_support: slew rate support */ struct atmel_pioctrl_data { unsigned nbanks; unsigned last_bank_count; + unsigned int slew_rate_support; }; struct atmel_group { @@ -117,6 +120,7 @@ struct atmel_pin { * @pm_suspend_backup: backup/restore register values on suspend/resume * @dev: device entry for the Atmel PIO controller. * @node: node of the Atmel PIO controller. + * @slew_rate_support: slew rate support */ struct atmel_pioctrl { void __iomem *reg_base; @@ -138,6 +142,7 @@ struct atmel_pioctrl { } *pm_suspend_backup; struct device *dev; struct device_node *node; + unsigned int slew_rate_support; }; static const char * const atmel_functions[] = { @@ -760,6 +765,13 @@ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev, return -EINVAL; arg = 1; break; + case PIN_CONFIG_SLEW_RATE: + if (!atmel_pioctrl->slew_rate_support) + return -EOPNOTSUPP; + if (!(res & ATMEL_PIO_SR_MASK)) + return -EINVAL; + arg = 1; + break; case ATMEL_PIN_CONFIG_DRIVE_STRENGTH: if (!(res & ATMEL_PIO_DRVSTR_MASK)) return -EINVAL; @@ -793,6 +805,10 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev, dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n", __func__, pin_id, configs[i]); + /* Keep slew rate enabled by default. */ + if (atmel_pioctrl->slew_rate_support) + conf |= ATMEL_PIO_SR_MASK; + switch (param) { case PIN_CONFIG_BIAS_DISABLE: conf &= (~ATMEL_PIO_PUEN_MASK); @@ -850,6 +866,13 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev, ATMEL_PIO_SODR); } break; + case PIN_CONFIG_SLEW_RATE: + if (!atmel_pioctrl->slew_rate_support) + break; + /* And remove it if explicitly requested. */ + if (arg == 0) + conf &= ~ATMEL_PIO_SR_MASK; + break; case ATMEL_PIN_CONFIG_DRIVE_STRENGTH: switch (arg) { case ATMEL_PIO_DRVSTR_LO: @@ -901,6 +924,8 @@ static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev, seq_printf(s, "%s ", "open-drain"); if (conf & ATMEL_PIO_SCHMITT_MASK) seq_printf(s, "%s ", "schmitt"); + if (atmel_pioctrl->slew_rate_support && (conf & ATMEL_PIO_SR_MASK)) + seq_printf(s, "%s ", "slew-rate"); if (conf & ATMEL_PIO_DRVSTR_MASK) { switch ((conf & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET) { case ATMEL_PIO_DRVSTR_ME: @@ -994,6 +1019,7 @@ static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = { static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = { .nbanks = 5, .last_bank_count = 8, /* sama7g5 has only PE0 to PE7 */ + .slew_rate_support = 1, }; static const struct of_device_id atmel_pctrl_of_match[] = { @@ -1039,6 +1065,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev) atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK; atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count; } + atmel_pioctrl->slew_rate_support = atmel_pioctrl_data->slew_rate_support; atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(atmel_pioctrl->reg_base)) |