index
:
starfive-tech/linux.git
JH7100_VisionFive_OH_dev
JH7110_VisionFive2_510_devel
JH7110_VisionFive2_6.1.y_devel
JH7110_VisionFive2_6.6.y_devel
JH7110_VisionFive2_devel
JH7110_VisionFive2_upstream
beaglev-5.13.y
beaglev_fedora_devel
buildroot-upstream
esmil_starlight
fedora-vic-7100_5.10.6
master
openwrt-6.1.y
rt-ethercat-release
rt-linux-release
rtthread_AMP
starfive-5.13
starfive-5.15-dubhe
starfive-6.1-dubhe
starfive-6.1.65-dubhe
starfive-6.6.10-dubhe
starfive-6.6.31-dubhe
starlight-5.14.y
visionfive
visionfive-5.13.y-devel
visionfive-5.15.y
visionfive-5.15.y-devel
visionfive-5.15.y_fedora_devel
visionfive-5.16.y
visionfive-5.17.y
visionfive-5.18.y
visionfive-5.19.y
visionfive-6.4.y
visionfive_fedora_devel
StarFive Tech Linux Kernel for VisionFive (JH7110) boards (mirror)
Andrey V.Kosteltsev
summary
refs
log
tree
commit
diff
log msg
author
committer
range
path:
root
/
arch
/
arm
/
boot
/
dts
/
imx6qdl-sabresd.dtsi
Age
Commit message (
Expand
)
Author
Files
Lines
2014-09-16
ARM: dts: imx6qdl-sabresd: Configure the pins locally
Fabio Estevam
1
-13
/
+13
2014-09-16
ARM: dts: imx6qdl-sabresd: add always on pcie regulator
Lucas Stach
1
-0
/
+19
2014-07-18
ARM: dts: imx: remove ssi fsl,mode for audio cards
Markus Pargmann
1
-1
/
+0
2014-07-18
ARM: dts: imx6qdl-sabresd: Configure the ECSPI1 chip select pin
Fabio Estevam
1
-0
/
+1
2014-05-16
ARM: dts: imx6qdl-sabresd: Add USDHC4 support
Fabio Estevam
1
-0
/
+24
2014-05-16
ARM: dts: Add stdout-path property to i.MX boards
Sascha Hauer
1
-0
/
+4
2014-05-16
ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie
Lucas Stach
1
-2
/
+0
2014-05-16
ARM: dts: imx6qdl-sabresd: Add PCIe support
Marek Vasut
1
-0
/
+15
2014-05-16
ARM: dts: imx6qdl-sabresd: Add HDMI support
Fabio Estevam
1
-0
/
+5
2014-04-30
ARM: dts: imx6qdl-sabresd.dtsi: Add red led
Vincent Stehlé
1
-0
/
+19
2014-02-10
ARM: dts: imx6qdl-sabresd: correct gpio key's active state
Anson Huang
1
-3
/
+4
2014-02-10
ARM: dts: imx6qdl-sabresd: Add PFUZE100 support
Fabio Estevam
1
-0
/
+113
2014-02-09
ARM: dts: imx6qdl-sabresd: Add power key support
Anson Huang
1
-4
/
+21
2014-02-09
ARM: dts: imx: specify the value of audmux pinctrl instead of 0x80000000
Nicolin Chen
1
-4
/
+4
2014-02-09
ARM: dts: imx6: use generic node name for fixed regulator
Shawn Guo
1
-3
/
+8
2014-02-09
ARM: dts: imx6qdl: make pinctrl nodes board specific
Shawn Guo
1
-11
/
+112
2013-10-12
ARM: dts: imx6qdl-sabresd: Add backlight support for lvds
Rogerio Pimentel
1
-0
/
+14
2013-09-29
ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios
Fabio Estevam
1
-0
/
+2
2013-09-26
ARM: dts: imx6qdl-sabresd: SDHC ports are 8 bit-wide
Fabio Estevam
1
-0
/
+2
2013-08-22
ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
Peter Chen
1
-0
/
+1
2013-08-22
ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
Peter Chen
1
-0
/
+11
2013-08-22
ARM: dts: imx6qdl-sabresd: Add touchscreen support
Fabio Estevam
1
-0
/
+16
2013-08-22
ARM: dts: imx6qdl-sabresd: Allow buttons to wake-up the system
Fabio Estevam
1
-0
/
+2
2013-08-22
ARM: imx6q: remove board specific CLKO setup
Shawn Guo
1
-1
/
+1
2013-08-22
ARM: dts: imx: add LVDS panel for imx6qdl-sabresd
Shawn Guo
1
-0
/
+25
2013-08-22
ARM: dts: imx: share pad macro names between imx6q and imx6dl
Shawn Guo
1
-0
/
+19
2013-08-22
ARM: dts: imx6qdl-sabresd: enable the SPI NOR
Huang Shijie
1
-0
/
+16
2013-06-17
ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support
Nicolin Chen
1
-0
/
+19
2013-06-17
ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX
Nicolin Chen
1
-0
/
+11
2013-06-17
ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support
Nicolin Chen
1
-0
/
+29
2013-06-17
ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962
Nicolin Chen
1
-0
/
+7
2013-04-09
ARM: dts: imx: make sabreauto and sabresd common
Shawn Guo
1
-0
/
+87