summaryrefslogtreecommitdiff
path: root/arch/arm64/boot/dts
AgeCommit message (Collapse)AuthorFilesLines
2024-03-21Merge tag 'usb-6.9-rc1' of ↵Linus Torvalds1-0/+46
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots of tiny changes and forward progress to support new hardware and better support for existing devices. Included in here are: - Thunderbolt (i.e. USB4) updates for newer hardware and uses as more people start to use the hardware - default USB authentication mode Kconfig and documentation update to make it more obvious what is going on - USB typec updates and enhancements - usual dwc3 driver updates - usual xhci driver updates - function USB (i.e. gadget) driver updates and additions - new device ids for lots of drivers - loads of other small updates, full details in the shortlog All of these, including a "last minute regression fix" have been in linux-next with no reported issues" * tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits) usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic phy: tegra: xusb: Add API to retrieve the port number of phy USB: gadget: pxa27x_udc: Remove unused of_gpio.h usb: gadget/snps_udc_plat: Remove unused of_gpio.h usb: ohci-pxa27x: Remove unused of_gpio.h usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined usb: Clarify expected behavior of dev_bin_attrs_are_visible() xhci: Allow RPM on the USB controller (1022:43f7) by default usb: isp1760: remove SLAB_MEM_SPREAD flag usage usb: misc: onboard_hub: use pointer consistently in the probe function usb: gadget: fsl: Increase size of name buffer for endpoints usb: gadget: fsl: Add of device table to enable module autoloading usb: typec: tcpm: add support to set tcpc connector orientatition usb: typec: tcpci: add generic tcpci fallback compatible dt-bindings: usb: typec-tcpci: add tcpci fallback binding usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg} usb: core: Set connect_type of ports based on DT node dt-bindings: usb: Add downstream facing ports to realtek binding ...
2024-03-19Merge tag 'soc-late-6.9' of ↵Linus Torvalds2-9/+7
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull more ARM SoC updates from Arnd Bergmann: "These are changes that for some reason ended up not making it into the first four branches but that should still make it into 6.9: - A rework of the omap clock support that touches both drivers and device tree files - The reset controller branch changes that had a dependency on late bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the drivers branch - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree changes that got delayed and needed some extra time in linux-next for wider testing" * tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) soc: fsl: dpio: fix kcalloc() argument order bus: ts-nbus: Improve error reporting bus: ts-nbus: Convert to atomic pwm API riscv: dts: starfive: jh7110: Add camera subsystem nodes ARM: bcm: stop selecing CONFIG_TICK_ONESHOT ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift clk: ti: Improve clksel clock bit parsing for reg property clk: ti: Handle possible address in the node name dt-bindings: pwm: opencores: Add compatible for StarFive JH8100 dt-bindings: riscv: cpus: reg matches hart ID reset: Instantiate reset GPIO controller for shared reset-gpios reset: gpio: Add GPIO-based reset controller cpufreq: do not open-code of_phandle_args_equal() of: Add of_phandle_args_equal() helper reset: simple: add support for Sophgo SG2042 dt-bindings: reset: sophgo: support SG2042 riscv: dts: microchip: add specific compatible for mpfs pdma riscv: dts: microchip: add missing CAN bus clocks ARM: brcmstb: Add debug UART entry for 74165 ...
2024-03-15Merge tag 'mtd/for-6.9' of ↵Linus Torvalds17-3/+171
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD: - The Carillo Ranch driver has been removed - Top level mtd bindings have received a couple of improvements (references, selects) - The ssfdc driver received few minor adjustments - The usual load of misc/small improvements and fixes Raw NAND: - The main series brought is an update of the Broadcom support to support all BCMBCA SoCs and their specificity (ECC, write protection, configuration straps), plus a few misc fixes and changes in the main driver. Device tree updates are also part of this PR, initially because of a misunderstanding on my side. - The STM32_FMC2 controller driver is also upgraded to properly support MP1 and MP25 SoCs. - A new compatible is added for an Atmel flavor. - Among all these feature changes, there is as well a load of continuous read related fixes, avoiding more corner conditions and clarifying the logic. Finally a few miscellaneous fixes are made to the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as final one in the Hynix vendor driver. SPI-NAND: - The ESMT support has been extended to match 5 bytes ID to avoid collisions. Winbond support on its side receives support for W25N04KV chips. SPI NOR: - SPI NOR gets the non uniform erase code cleaned. We stopped using bitmasks for erase types and flags, and instead introduced dedicated members. We then passed the SPI NOR erase map to MTD. Users can now determine the erase regions and make informed decisions on partitions size. - An optional interrupt property is now described in the bindings" * tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits) mtd: rawnand: Ensure continuous reads are well disabled mtd: rawnand: Constrain even more when continuous reads are enabled mtd: rawnand: brcmnand: Add support for getting ecc setting from strap mtd: rawnand: brcmnand: fix sparse warnings mtd: nand: raw: atmel: Fix comment in timings preparation mtd: rawnand: Ensure all continuous terms are always in sync mtd: rawnand: Add a helper for calculating a page index mtd: rawnand: Fix and simplify again the continuous read derivations mtd: rawnand: hynix: remove @nand_technology kernel-doc description dt-bindings: atmel-nand: add microchip,sam9x7-pmecc mtd: rawnand: brcmnand: Support write protection setting from dts mtd: rawnand: brcmnand: Add BCMBCA read data bus interface mtd: rawnand: brcmnand: Rename bcm63138 nand driver arm64: dts: broadcom: bcmbca: Update router boards arm64: dts: broadcom: bcmbca: Add NAND controller node ARM: dts: broadcom: bcmbca: Add NAND controller node mtd: spi-nor: core: correct type of i mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag ...
2024-03-15arm64: dts: broadcom: bcmbca: Update router boardsWilliam Zhang3-1/+15
Enable the nand controller and add WP pin connection property in actual board dts as they are board level properties now that they are disabled and moved out from SoC dtsi. Also remove the unnecessary brcm,nand-has-wp property from AC5300 board. This property is only needed for some old controller that this board does not apply. Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-10-william.zhang@broadcom.com
2024-03-15arm64: dts: broadcom: bcmbca: Add NAND controller nodeWilliam Zhang14-2/+156
Add support for Broadcom STB NAND controller in BCMBCA ARMv8 chip dts files. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-9-william.zhang@broadcom.com
2024-03-12Merge tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds493-5863/+32360
Pull SoC device tree updates from Arnd Bergmann: "There is very little going on with new SoC support this time, all the new chips are variations of others that we already support, and they are all based on ARMv8 cores: - Mediatek MT7981B (Filogic 820) and MT7988A (Filogic 880) are networking SoCs designed to be used in wireless routers, similar to the already supported MT7986A (Filogic 830). - NXP i.MX8DXP is a variant of i.MX8QXP, with two CPU cores less. These are used in many embedded and industrial applications. - Renesas R8A779G2 (R-Car V4H ES2.0) and R8A779H0 (R-Car V4M) are automotive SoCs. - TI J722S is another automotive variant of its K3 family, related to the AM62 series. There are a total of 7 new arm32 machines and 45 arm64 ones, including - Two Android phones based on the old Tegra30 chip - Two machines using Cortex-A53 SoCs from Allwinner, a mini PC and a SoM development board - A set-top box using Amlogic Meson G12A S905X2 - Eight embedded board using NXP i.MX6/8/9 - Three machines using Mediatek network router chips - Ten Chromebooks, all based on Mediatek MT8186 - One development board based on Mediatek MT8395 (Genio 1200) - Seven tablets and phones based on Qualcomm SoCs, most of them from Samsung. - A third development board for Qualcomm SM8550 (Snapdragon 8 Gen 2) - Three variants of the "White Hawk" board for Renesas automotive SoCs - Ten Rockchips RK35xx based machines, including NAS, Tablet, Game console and industrial form factors. - Three evaluation boards for TI K3 based SoCs The other changes are mainly the usual feature additions for existing hardware, cleanups, and dtc compile time fixes. One notable change is the inclusion of PowerVR SGX GPU nodes on TI SoCs" * tag 'soc-dt-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (824 commits) riscv: dts: Move BUILTIN_DTB_SOURCE to common Kconfig riscv: dts: starfive: jh7100: fix root clock names ARM: dts: samsung: exynos4412: decrease memory to account for unusable region arm64: dts: qcom: sm8250-xiaomi-elish: set rotation arm64: dts: qcom: sm8650: Fix SPMI channels size arm64: dts: qcom: sm8550: Fix SPMI channels size arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433 arm: dts: marvell: clearfog-gtr-l8: align port numbers with enclosure arm: dts: marvell: clearfog-gtr-l8: add support for second sfp connector dt-bindings: soc: renesas: renesas-soc: Add pattern for gray-hawk dtc: Enable dtc interrupt_provider check arm64: dts: st: add video encoder support to stm32mp255 arm64: dts: st: add video decoder support to stm32mp255 ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk ARM: dts: stm32: enable CRC on stm32mp135f-dk ARM: dts: stm32: add CRC on stm32mp131 ARM: dts: add stm32f769-disco-mb1166-reva09 ARM: dts: stm32: add display support on stm32f769-disco ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add DSI support on stm32f769 ...
2024-03-11Merge tag 'irq-core-2024-03-10' of ↵Linus Torvalds1-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Core: - Make affinity changes take effect immediately for interrupt threads. This reduces the impact on isolated CPUs as it pulls over the thread right away instead of doing it after the next hardware interrupt arrived. - Cleanup and improvements for the interrupt chip simulator - Deduplication of the interrupt descriptor initialization code so the sparse and non-sparse mode share more code. Drivers: - A set of conversions to platform_drivers::remove_new() which gets rid of the pointless return value. - A new driver for the Starfive JH8100 SoC - Support for Amlogic-T7 SoCs - Improvement for the interrupt handling and EOI management for the loongson interrupt controller. - The usual fixes and improvements all over the place" * tag 'irq-core-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits) irqchip/ts4800: Convert to platform_driver::remove_new() callback irqchip/stm32-exti: Convert to platform_driver::remove_new() callback irqchip/renesas-rza1: Convert to platform_driver::remove_new() callback irqchip/renesas-irqc: Convert to platform_driver::remove_new() callback irqchip/renesas-intc-irqpin: Convert to platform_driver::remove_new() callback irqchip/pruss-intc: Convert to platform_driver::remove_new() callback irqchip/mvebu-pic: Convert to platform_driver::remove_new() callback irqchip/madera: Convert to platform_driver::remove_new() callback irqchip/ls-scfg-msi: Convert to platform_driver::remove_new() callback irqchip/keystone: Convert to platform_driver::remove_new() callback irqchip/imx-irqsteer: Convert to platform_driver::remove_new() callback irqchip/imx-intmux: Convert to platform_driver::remove_new() callback irqchip/imgpdc: Convert to platform_driver::remove_new() callback irqchip: Add StarFive external interrupt controller dt-bindings: interrupt-controller: Add starfive,jh8100-intc arm64: dts: Add gpio_intc node for Amlogic-T7 SoCs irqchip/meson-gpio: Add support for Amlogic-T7 SoCs dt-bindings: interrupt-controller: Add support for Amlogic-T7 SoCs irqchip/vic: Fix a kernel-doc warning genirq: Wake interrupt threads immediately when changing affinity ...
2024-03-11Merge tag 'arm-soc/for-6.9/devicetree-arm64' of ↵Arnd Bergmann2-9/+7
https://github.com/Broadcom/stblinux into soc/late This pull request contains Broadcom ARM64-based SoCs changes for 6.9, please pull the following: - Rafal defines a proper NVMEM layout for the Asus GT-AC5300 router and removes some invalid Device Tree properties pertaining to the Ethernet switch on bcm4908 * tag 'arm-soc/for-6.9/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: bcmbca: bcm4908: drop invalid switch cells arm64: dts: broadcom: bcmbca: bcm4908: use NVMEM layout for Asus GT-AC5300 Link: https://lore.kernel.org/r/20240307200441.2151734-1-florian.fainelli@broadcom.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-06Merge tag 'qcom-arm64-for-6.9-2' of ↵Arnd Bergmann3-3/+4
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt A few Qualcomm Arm64 DeviceTree fixes for v6.9 This corrects the orientation of the panel of Xiaomi Pad 5 Pro, and corrects a typo in the size of the SPMI channel register size in both SM8550 and SM8650. * tag 'qcom-arm64-for-6.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sm8250-xiaomi-elish: set rotation arm64: dts: qcom: sm8650: Fix SPMI channels size arm64: dts: qcom: sm8550: Fix SPMI channels size Link: https://lore.kernel.org/r/20240306031451.4545-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-06Merge tag 'qcom-arm64-fixes-for-6.8-2' of ↵Arnd Bergmann3-33/+10
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes A few more Qualcomm Arm64 DeviceTree fixes for v6.8 This reduces the link speed of the PCIe bus with WiFi-card connected on the Lenovo ThinkPad X13s and the Qualcomm Compute Reference Device, avoid link errors and initialization issues reported by users. It also reverts the enablement of MPM on MSM8996, which is reported to prevent boards on this platform from booting for some users. * tag 'qcom-arm64-fixes-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: Revert "arm64: dts: qcom: msm8996: Hook up MPM" arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed Link: https://lore.kernel.org/r/20240306031208.4218-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04Merge tag 'tegra-for-6.8-arm64-dt' of ↵Arnd Bergmann2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v6.8 This contains two fixes to make the MGBE Ethernet devices found on Tegra234 work properly. * tag 'tegra-for-6.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Fix Tegra234 MGBE power-domains arm64: tegra: Set the correct PHY mode for MGBE Link: https://lore.kernel.org/r/20240226144536.1525704-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04Merge tag 'imx-fixes-6.8-2' of ↵Arnd Bergmann2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 6.8, round 2: - Update MAINTAINERS to use a public mailing list for NXP i.MX development. - Re-enable CONFIG_BACKLIGHT_CLASS_DEVICE in imx_v6_v7_defconfig to fix a backlight regression. - Remove DSI port endpoints from i.MX7 SoC DTSI to fix a display regression. - Fix LDB clocks property for i.MX8MP device tree. - Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM. * tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mp: Fix LDB clocks property arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM MAINTAINERS: Use a proper mailinglist for NXP i.MX development ARM: dts: imx7: remove DSI port endpoints ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE Link: https://lore.kernel.org/r/ZdtPJzdenRybI+Bq@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04Merge tag 'qcom-arm64-fixes-for-6.8' of ↵Arnd Bergmann3-2/+5
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DeviceTree fixes for 6.8 This marks an additional GPIO as protected on SM8650 devices, to avoid a system reset caused by a security violation with some firmware versions. It also adds the missing interconnect-names, which resolves a regression where one of the I2C busses on SM6115 devices would no longer probe in Linux. * tag 'qcom-arm64-fixes-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: sm6115: Fix missing interconnect-names arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio Link: https://lore.kernel.org/r/20240225025205.479589-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04Merge tag 'sunxi-fixes-for-6.8-1' of ↵Arnd Bergmann1-0/+1
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes - include Orange Pi Zero 2W DT in Makefile * tag 'sunxi-fixes-for-6.8-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile Link: https://lore.kernel.org/r/20240223205450.GA8881@jernej-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04Merge tag 'v6.9-rockchip-dts64-2' of ↵Arnd Bergmann9-5/+1759
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt Initial support for the rk3568 Qnap TS433 NAS, the rk3588-based Tiger SoM from Theobroma-Systems and the rk3588-based Toybrick TB-RK3588X. Some fixes to conform to dt-bindings for i2s (rk3588, rk356x) and rk356x video-decoder (missing interrupt-names). Correcting the vendor in the compatible for OrangePi RK3399 and BananaPi R2 Pro (discussed with DT-maintainers beforehand of course). The VO1-GRF syscon needs its clock to work, and that clock also needed to be actually exported forst, so we're sharing a branch with the Rockchip clock-tree (that already got merged into the main clock-tree for 6.9) for this small shared code. And as another step on the long road to graphics output on rk3588, 6.9 will get the hdmi-phy via the phy-tree, so here the dts node is added. * tag 'v6.9-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433 arm64: dts: rockchip: Add basic support for QNAP TS-433 dt-bindings: arm: rockchip: Add QNAP TS-433 arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoM arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoM dt-bindings: arm: rockchip: Add Theobroma-Systems RK3588 Q7 with baseboard arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2s arm64: dts: rockchip: fix reset-names for rk356x i2s2 controller arm64: dts: rockchip: add missing interrupt-names for rk356x vdpu arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588 dt-bindings: arm: rockchip: Add Toybrick TB-RK3588X arm64: dts: rockchip: Add devicetree support for TB-RK3588X board arm64: dts: rockchip: adjust vendor on orangepi rk3399 board arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board dt-bindings: arm: rockchip: Correct vendor for Banana Pi R2 Pro dt-bindings: arm: rockchip: Correct vendor for Orange Pi RK3399 board arm64: dts: rockchip: Add HDMI0 PHY to rk3588 dt-bindings: clock: rk3588: add missing PCLK_VO1GRF dt-bindings: clock: rk3588: drop CLK_NR_CLKS clk: rockchip: rk3588: fix CLK_NR_CLKS usage Link: https://lore.kernel.org/r/3695004.ElGaqSPkdT@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04Merge tag 'mvebu-dt64-6.9-1' of ↵Arnd Bergmann5-11/+47
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt mvebu dt64 for 6.9 (part 1) Add mmc support for AC5 Reorder crypto interrupts on Armada 3720 Use the correct thermal coefficients for the Armada AP807 dies * tag 'mvebu-dt64-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: armada-ap807: update thermal compatible arm64: dts: marvell: reorder crypto interrupts on Armada SoCs arm64: dts: ac5: add mmc node and clock Link: https://lore.kernel.org/r/87a5nihr8g.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04Merge tag 'stm32-dt-for-v6.9-1' of ↵Arnd Bergmann2-0/+29
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt STM32 DT for v6.9, round 1 Highlights: ---------- - MCU: - Add DSI support on stm32f769. - Add display support on stm32f769-disco. - Add stm32f769-disco-mb1166-reva09 board support which belongs to the novatek NT35510 panel. - MPU: - STM32MP13: - Add CRC support an enable it on stm32mp135f-dk. - Enable CRYP on stm32mp135f-dk. - STMP32MP15: - Fix DSI peripheral clock: use bus clock instead of kernel clock for pclk. - LXA: driver powerboard lines as open drain. - LXA: reduce RGMII drive strenght to reduce EMI emmissions. - STM32MP25: - Add video encoder / video decoder support. * tag 'stm32-dt-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: arm64: dts: st: add video encoder support to stm32mp255 arm64: dts: st: add video decoder support to stm32mp255 ARM: dts: stm32: enable crypto accelerator on stm32mp135f-dk ARM: dts: stm32: enable CRC on stm32mp135f-dk ARM: dts: stm32: add CRC on stm32mp131 ARM: dts: add stm32f769-disco-mb1166-reva09 ARM: dts: stm32: add display support on stm32f769-disco ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add DSI support on stm32f769 dt-bindings: mfd: stm32f7: Add binding definition for DSI dt-bindings: nt35510: document 'port' property ARM: dts: stm32: lxa-tac: reduce RGMII interface drive strength ARM: dts: stm32: fix DSI peripheral clock on stm32mp15 boards ARM: dts: stm32: lxa-tac: drive powerboard lines as open-drain Link: https://lore.kernel.org/r/a7ae1058-e24d-4a6b-900f-401f0e3ae17c@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-04arm64: dts: qcom: sm8250-xiaomi-elish: set rotationJianhua Lu1-1/+2
Xiaomi Pad 5 Pro has a 2560x1600 portrait screen, set RIGHT_UP rotation to make it look like a landscape screen. Signed-off-by: Jianhua Lu <lujianhua000@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20240227121744.10918-1-lujianhua000@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-04arm64: dts: qcom: sm8650: Fix SPMI channels sizeAbel Vesa1-1/+1
The actual size of the channels registers region is 4MB, according to the documentation. This issue was not caught until now because the driver was supposed to allow same regions being mapped multiple times for supporting multiple buses. Thie driver is using platform_get_resource_byname() and devm_ioremap() towards that purpose, which intentionally avoids devm_request_mem_region() altogether. Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Link: https://lore.kernel.org/r/20240221-dts-qcom-sm8550-fix-spmi-chnls-size-v2-2-72b5efd9dc4f@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-04arm64: dts: qcom: sm8550: Fix SPMI channels sizeAbel Vesa1-1/+1
The actual size of the channels registers region is 4MB, according to the documentation. This issue was not caught until now because the driver was supposed to allow same regions being mapped multiple times for supporting multiple buses. Thie driver is using platform_get_resource_byname() and devm_ioremap() towards that purpose, which intentionally avoids devm_request_mem_region() altogether. Fixes: ffc50b2d3828 ("arm64: dts: qcom: Add base SM8550 dtsi") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240221-dts-qcom-sm8550-fix-spmi-chnls-size-v2-1-72b5efd9dc4f@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-04Revert "arm64: dts: qcom: msm8996: Hook up MPM"Dmitry Baryshkov1-33/+6
Commit 09896da07315 ("arm64: dts: qcom: msm8996: Hook up MPM") has hooked up the MPM irq chip on the MSM8996 platform. However this causes my Dragonboard 820c crash during bootup (usually when probing IOMMUs). Revert the offending commit for now. Quick debug shows that making tlmm's wakeup-parent point to the MPM is enough to trigger the crash. Fixes: 09896da07315 ("arm64: dts: qcom: msm8996: Hook up MPM") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240221-msm8996-revert-mpm-v1-1-cdca9e30c9b4@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-02arm64: dts: qcom: pm6150: define USB-C related blocksDanila Tikhonov1-0/+46
Define VBUS regulator and the Type-C handling block as present on the Qualcomm PM6150 PMIC. Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240220202147.228911-3-danila@jiaxyga.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-02arm64: dts: rockchip: Fix name for UART pin header on qnap-ts433Uwe Kleine-König1-1/+1
I typoed the pin header name when copying it from my notes on paper. Fixes: 9da1c0327d58 ("arm64: dts: rockchip: Add basic support for QNAP TS-433") Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> Link: https://lore.kernel.org/r/20240301163201.559787-2-ukleinek@debian.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-03-01Merge tag 'amlogic-arm64-dt-for-v6.9' of ↵Arnd Bergmann44-184/+708
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt Amlogic ARM64 DT changes for v6.9: - New Board: - Freebox Pop Player (IPTV Set-To-Box from Free FRench internet provider) - Add reset controller for Amlogic C3 - Set initial rate for the NPU on Amlogic G12 SoCs - Set initial clocks for USB on Amlogic A1 - Initialize Amlogic AXG SoC capacitance - Drop unstable remark on Amlogic Bindings - Add all Amlogic maintainers/reviewers on Amlogic SoCs bindings - Cleanups: - T7 whitespaces - Underscore in names * tag 'amlogic-arm64-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux: dt-bindings: arm: amlogic: add Neil, Martin and Jerome as maintainers dt-bindings: arm: amlogic: remove unstable remark arm64: dts: amlogic: add fbx8am DT overlays arm64: dts: amlogic: add fbx8am board dt-bindings: arm: amlogic: add fbx8am binding dt-bindings: vendor-prefixes: add freebox arm64: dts: amlogic: replace underscores in node names arm64: dts: amlogic: t7: minor whitespace cleanup arm64: dts: amlogic: axg: initialize default SoC capacitance arm64: dts: amlogic: axg: move cpu cooling-cells to common dtsi arch: arm64: dts: meson: a1: add assigned-clocks for usb node arm64: dts: amlogic: meson-g12-common: Set the rates of the clocks for the NPU arm64: dts: amlogic: add reset controller for Amlogic C3 SoC Link: https://lore.kernel.org/r/1937f5ef-5d76-4259-931d-523c0e2f0a91@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'ti-k3-dt-for-v6.9' of ↵Arnd Bergmann120-1399/+5235
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt TI K3 device tree updates for v6.9 New Features across family / New SoCs: - J722s SoC and board support with OSPI NOR, CPSW ethernet - Camera capture support on mulitple J7xx SoCs, AM68, AM69 and AM62P SoCs - Wave5 Encoder/Decoder support for J721s2, J784s4 and AM62P Generic Cleanups/Fixes: - Stop spliting single mbox items - Adds MIT license along with GPL-2.0 for all TI DTS files - Moves PCIe EP nodes in overlays - VTM Power domain fixups for J7xx SoCs - Conversion of mmio mux users to reg-mux where possible - Drops unnecessary UART pinmuxes on J7xx SoCs - MMC TAP value updates for AM64/AM62A/AM62P for improved stability - DSS register space updates for AM65/AM62/AM62A SoC specific Fixes/Features: J7200: - Adds CAN support - New compatible for J7200 to support IO wakeup AM62A - HDMI Display (DSS) support - Move to simple-bus for main_conf node - eMMC, additional MMC/SD instance support AM62 - move to simple-bus for main_conf node AM654 - IOT2050-SM board support - IOT2050 DT refractoring. AM64 - SolidRun AM642 HummingBoard-T support and its DT overlays - ICSSG Ethernet support and associated peripherals Board specific fixes/Features: - Beagle Play MDIO and USB node fixes - TPM support on k3-am642-phyboard-electra and verdin-am62-mallow - Phycore-am64 ADC - PCIe + USB2.0 SERDES and PCIe + USB3.0 SERDES card support - USB1 support on verdin-am62 * tag 'ti-k3-dt-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (126 commits) arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3 arm64: dts: add description for solidrun am642 som and evaluation board dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T arm64: dts: ti: k3-am62p: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-j721s2-main: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-j784s4: Add Wave5 Video Encoder/Decoder Node arm64: dts: ti: k3-am69-sk: Add support for OSPI flash arm64: dts: ti: k3-am69-sk: Enable CAN interfaces for AM69 SK board arm64: dts: ti: Enable overlays for SK-AM62P arm64: dts: ti: k3-am62p: Add nodes for CSI-RX arm64: dts: ti: k3-am62p: Add DMASS1 for CSI arm64: dts: ti: k3-am62p: Fix memory ranges for DMSS arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support arm64: dts: ti: k3-j722s-evm: Enable CPSW3G RGMII1 arm64: dts: ti: k3-j784s4-main: Fix mux-reg-masks in serdes_ln_ctrl arm64: dts: ti: k3-j721e: Fix mux-reg-masks in hbmc_mux arm64: dts: ti: Add common1 register space for AM62A SoC arm64: dts: ti: Add common1 register space for AM62x SoC arm64: dts: ti: Add common1 register space for AM65x SoC arm64: dts: ti: k3-am642-evm: add overlay for ICSSG1 2nd port ... Link: https://lore.kernel.org/r/e7e984db-47b9-404a-9471-5d2ed0effe1d@ti.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speedJohan Hovold1-0/+2
Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the speed that the boot firmware has brought up the link at (and that Windows uses). This is specifically needed to avoid a large amount of link errors when restarting the link during boot (but which are currently not reported). This also appears to fix intermittent failures to download the ath11k firmware during boot which can be seen when there is a longer delay between restarting the link and loading the WiFi driver (e.g. when using full disk encryption). Fixes: 123b30a75623 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller") Cc: stable@vger.kernel.org # 6.2 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240223152124.20042-8-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-01arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speedJohan Hovold1-0/+2
Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the speed that Windows uses. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20240223152124.20042-7-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-03-01Merge tag 'zynqmp-dt-for-6.9' of https://github.com/Xilinx/linux-xlnx into ↵Arnd Bergmann14-57/+149
soc/dt arm64: ZynqMP DT changes for 6.9 dt-bindings: - Describe firmware for Versal NET - Describe all firmware child nodes - Align versal-fpga node name with dt schema - Describe k26 rev2 and kv260 DTs: - Align firmware node with dt schema - Add an optee node - Describe reset for CANs - Update ECAM size to discover up to 256 buses - Describe assigned-clocks for uarts - Add u-boot node - Comment SMMU entries - Align dwc3 nodes with dt schema - Rename i2c groups to match dt schema - Small DT updates (comments) - Fix default clock frequency for si570 (zcu102, zcu106) - Add output-enable pins and cover MIO38 (SOM) * tag 'zynqmp-dt-for-6.9' of https://github.com/Xilinx/linux-xlnx: (21 commits) dt-bindings: firmware: xilinx: Describe soc-nvmem subnode dt-bindings: soc: xilinx: Add support for KV260 CC dt-bindings: soc: xilinx: Add support for K26 rev2 SOMs arm64: zynqmp: Align usb clock nodes with binding arm64: zynqmp: Comment all smmu entries arm64: zynqmp: Rename i2c?-gpio to i2c?-gpio-grp arm64: zynqmp: Disable Tri-state for MIO38 Pin arm64: zynqmp: Remove incorrect comment from kv260s arm64: zynqmp: Introduce u-boot options node with bootscr-address arm64: zynqmp: Fix comment to be aligned with board name. arm64: zynqmp: Update ECAM size to discover up to 256 buses arm64: zynqmp: Describe assigned-clocks for uarts arm64: zynqmp: Setup default si570 frequency to 156.25MHz arm64: zynqmp: Add resets property for CAN nodes arm64: zynqmp: Add an OP-TEE node to the device tree arm64: zynqmp: Add output-enable pins to SOMs arm64: zynqmp: Rename zynqmp-power node to power-management dt-bindings: firmware: xilinx: Sort node names (clock-controller) dt-bindings: firmware: xilinx: Describe missing child nodes dt-bindings: firmware: xilinx: Fix versal-fpga node name ... Link: https://lore.kernel.org/r/CAHTX3dLEoFMTGg1Q4+OuOwWYd8N73YBTXki8Vvj3cGHUpLJ0=A@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'sgx-for-v6.9-signed' of ↵Arnd Bergmann1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into soc/dt Add PowerVR Series5 SGX GPUs for the TI SoCs With the Imagination Rogue GPU binding added, let's also add the devicetree binding for earlier SGX GPUs. Let's also patch the TI SoCs for the related SGX GPU nodes. Based on the mailing list discussions, the conclusion was that we need two separate device tree bindings, one for Rogue and upcoming GPUS, and one for the older SGX GPUs. For merging the changes, I applied the binding changes together with the TI SoC related changes into a branch leaving out the sun6i and mips changes as suggested by Rob. These changes are mostly 32-bit SoCs, but also contains one arm64 change. It does not cause any merge conflicts. * tag 'sgx-for-v6.9-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: arm64: dts: ti: k3-am654-main: Add device tree entry for SGX GPU ARM: dts: DRA7xx: Add device tree entry for SGX GPU ARM: dts: AM437x: Add device tree entry for SGX GPU ARM: dts: AM33xx: Add device tree entry for SGX GPU ARM: dts: omap5: Add device tree entry for SGX GPU ARM: dts: omap4: Add device tree entry for SGX GPU ARM: dts: omap3: Add device tree entry for SGX GPU dt-bindings: gpu: Add PowerVR Series5 SGX GPUs dt-bindings: gpu: Rename img,powervr to img,powervr-rogue Link: https://lore.kernel.org/r/pull-1708943489-872615@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'imx-dt64-6.9' of ↵Arnd Bergmann62-404/+3748
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt i.MX arm64 device tree for 6.9: - New board support: Apalis eval v1.2 carrier board, Variscite VAR-SOM-MX93, phyBOARD-Segin-i.MX93. - A series from Adam Ford to enable bluetooth, configure multiple queues on eqos, remove unnecessary clock configuration for i.MX8 Beacon boards. - Several changesets from Alexander Stein to add i.MX8DXP support, enable audio and GPU for i.MX8QXP, re-parent MEDIA_MIPI_PHY1_REF clock for i.MX8MP, and improve MBA8xx board description. - A few dt-schema fixes from Fabio Estevam for i.MX8MM and i.MX93 devices. - A bunch of changes from Frank Li to improve i.MX8QM and i.MX8DXL support, correcting edma3 power-domains and interrupt numbers, adding I2C, FlexCAN and SMMU devices, etc. - A series from Frieder Schrempf to improve imx8mm-kontron board descriptions, disabling pulls, fixing up RTC device, adding EEPROM, and refactoring OSM-S module, etc. - A set of Data Modul i.MX8M Plus eDM SBC improvements from Marek Vasut. - A series from Shengjiu Wang to add PDM micphone and SPDIF sound card support for imx8mm-evk board. - A series of imx8mm-venice boards improvement from Tim Harvey to add TPM device, fix USB OTG VBUS etc. - Other small and random improvements on various boards. * tag 'imx-dt64-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (77 commits) arm64: dts: imx8mm-kontron-bl-osm-s: Fix Ethernet PHY compatible arm64: dts: imx8-apalis-v1.1: Remove reset-names from ethernet-phy arm64: dts: imx8mp-evk: Fix hdmi@3d node arm64: dts: imx93-var-som: Remove phy-supply from eqos arm64: dts: imx8mp-phyboard-pollux: Disable pull-up for CD GPIO arm64: dts: imx8mp-phyboard-pollux: Reduce drive strength for eqos tx lines arm64: dts: imx8mp-phyboard-pollux: Set debug uart muxing to 0x140 arm64: dts: imx8mp-phyboard-pollux: Add and update rtc devicetree node arm64: dts: imx8mm-evk: Add spdif sound card support arm64: dts: mba8xx: Add missing #interrupt-cells arm64: dts: imx8mp: Set SPI NOR to max 40 MHz on Data Modul i.MX8M Plus eDM SBC arm64: dts: imx8mn: tqma8mqnl-mba8mx: Add USB DR overlay arm64: dts: imx8mq: tqma8mq-mba8mx: Add missing USB vbus supply arm64: dts: freescale: imx8mm/imx8mq: mba8mx: Use PCIe clock generator arm64: dts: imx8mn-beacon: Remove unnecessary clock configuration arm64: dts: imx8mn: Slow default video_pll clock rate arm64: dts: imx8mp-beacon: Configure multiple queues on eqos arm64: dts: imx8mp-beacon: Enable Bluetooth arm64: dts: freescale: minor whitespace cleanup arm64: dts: lx2160a: Fix DTS for full PL011 UART ... Link: https://lore.kernel.org/r/20240226034147.233993-4-shawnguo2@yeah.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'socfpga_dts_updates_for_v6.9' of ↵Arnd Bergmann1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt SoCFPGA DTS updates for v6.9 - Drop the "master" suffix in I3C controller node name * tag 'socfpga_dts_updates_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: intel: agilex5: drop "master" I3C node name suffix Link: https://lore.kernel.org/r/20240226012528.20380-1-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'qcom-arm64-for-6.9' of ↵Arnd Bergmann79-422/+7982
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt Qualcomm ARM64 DeviceTree updates for v6.9 Four variants of Samsung Galaxy Core Prime and Grand Prime, built on MSM8916, and the Hardware Development Kit (HDK) for SM8550, are introduced. On X Elite audio and compute remoteprocs, IPCC, PCIe, AOSS QMP, SMP2P, TCSR, USB, display, audio, and soundwire support is introduced, and enabled across the CRD and QCP devices. For SM8650 PCIe controllers are moved to GIC-ITS and msi-map-mask is defined. Missing qlink-logging reserved-memory region is added for the modem remoteproc. FastRPC compute contexts are marked dma-coherent. Audio, USB Type-C and PM8010 support is introduced across MTP and QRD devices. GPU cooling devices are hooked up across MSM8916, MSM8939, SC8180X, SDM630, SDM845, SM6115, SM8150, SM8250, SM8350, and SM8550. UFS PHY clocks are corrected across MSM8996, MSM8998, SC8180X, SC8280XP, SDM845, SM6115, SM6125, SM8150, SM8250, SM8350, SM8550, and SM8650. PCI MSI interrupts are wired up across SM8150, SM8250, SM8350, SM8450, SM8550, SM8650, SC7280, and SC8180X On IPQ6018 QUP5 I2C, tsens sand thermal zones are defined. The Inline Crypto Engine (ICE) is enabled for IPQ9574. On MSM8953 the GPU and its IOMMU is introduced, the reset for the display subsystem is also wired up. VLS CLAMP registers are specified for USB3 PHYs on MSM8998, QCM2290, and SM6115. USB Type-C port management is enabled on QRB4210 RB2. On the SA8295P ADP the MAX20411 regulator powering the GPU rails is introduced and the GPU is enabled. The first PCI instance on SA8540P Ride is disabled for now, as a fix for the interrupt storm produced here has not been presented. On SA8775P the firmware memory map has changed and is updated. Safety IRQ is added to the Ethernet controller. On SC7180 UFS support is introduced and the cros-ec-spi is marked as wakeup source. For SC7280 capacity and DPC properties are added, cryptobam definition is improved to work in more firmware environments, more Chrome-specific properties are moved out from main dtsi, and cros-ec-spi is maked as a wakeup source. Slimbus definition is added to the platform. A missing reserved-memory range is added to Fairphone FP5, PMIC GLINK and Venus are enabled. LEDs are introduced and voltage settings corrected on the QCM6490 IDP, and RB3gen2 sees the same voltage changes and GCC protected clocks are introduced to make the board boot properly. RPMh sleep stats and a variety of cleanups and fixes are introduced for SC8180X. On SC8280XP the additional tsens instances are introduced. Camera Subsystem and Camera Control Interface (CCI) are added. PMIC die-temp vadc channels are introduced on the CRD, to allow ADC channels to be tied to the shared PMIC temp-alarms, to actually report temperature. On SDM630 USB QMP PHY support is introduced and enabled on the Inforce IFC6560 board. On the various Sony Xperia XA2 variants WLED is enabled and configured. On SM6350 display subsystem interconnects and tsens-based thermal zones are added. On SM7125 UFS support is added. On Fairphone FP4, on SM7225, display and GPU are enabled, and firmware paths are corrected. SM8150 PCIe controller definitions are corrected. As with SM8650, the SM8550 the fastrpc compute contexts are marked dm-coherent, and PCIe controllers are moved to use GIC-ITS. The UFS controller frequency definition is moved to the generic opp-table. Touchscreen is enabled on the QRD device. As usual, a variety of smaller cleanups and corrections to match DeviceTree bindings and style guidelines are introduced across the various files. * tag 'qcom-arm64-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (176 commits) arm64: dts: qcom: sm6115: fix USB PHY configuration arm64: dts: sm8650: Add msi-map-mask for PCIe nodes arm64: dts: qcom: replace underscores in node names dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE arm64: dts: qcom: pm4125: define USB-C related blocks arm64: dts: qcom: sa8540p-ride: disable pcie2a node arm64: dts: qcom: sc7280: add slimbus DT node arm64: dts: qcom: sc7280: Add capacity and DPC properties arm64: dts: qcom: pmi632: Add PBS client and use in LPG node arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1 arm64: dts: qcom: sm8150: correct PCIe wake-gpios arm64: dts: qcom: sdm845-db845c: correct PCIe wake-gpios arm64: dts: qcom: sm7225-fairphone-fp4: Enable display and GPU arm64: dts: qcom: sm6350: Remove "disabled" state of GMU arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add fuel gauge arm64: dts: qcom: sm6350: Add interconnect for MDSS arm64: dts: qcom: msm8916-samsung-fortuna/rossa: Add initial device trees arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2 arm64: dts: qcom: sc8180x: describe all PCI MSI interrupts arm64: dts: qcom: minor whitespace cleanup ... Link: https://lore.kernel.org/r/20240225050146.484422-1-andersson@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-03-01Merge tag 'sunxi-dt-for-6.9-1' of ↵Arnd Bergmann12-8/+767
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt - new H616 peripherals: SPDIF, DMA, THS - H616 fanout pin configuration - H6 SPDIF node update - minor cleanups - enabled regulator on FETA40i board - added wifi to Transpeed 8K618-T board - new boards: Jide Remix Mini PC, Sipeed Longan Module 3H and Longan Pi 3H * tag 'sunxi-dt-for-6.9-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: h616: Add thermal sensor and zones ARM: dts: sun8i: Open FETA40i-C regulator aldo1 arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support dt-bindings: arm: sunxi: Add Sipeed Longan Module 3H and Longan Pi 3H arm64: dts: allwinner: h616: minor whitespace cleanup arm64: dts: allwinner: use capital "OR" for multiple licenses in SPDX arm64: dts: allwinner: Transpeed 8K618-T: add WiFi nodes arm64: dts: allwinner: h616: Add 32K fanout pin arm64: dts: allwinner: Add Jide Remix Mini PC support dt-bindings: arm: sunxi: document Remix Mini PC name dt-bindings: vendor-prefixes: add Jide arm64: dts: allwinner: h616: Add SPDIF device node arm64: dts: allwinner: h616: Add DMA controller and DMA channels arm64: dts: allwinner: h6: Add RX DMA channel for SPDIF dt-bindings: sram: narrow regex for unit address to hex numbers arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
2024-02-29Merge tag 'tegra-for-6.9-arm64-dt' of ↵Arnd Bergmann13-2000/+2355
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt arm64: tegra: Device tree changes for v6.9-rc1 This set of changes refactors the audio-related device tree nodes on Tegra234 and improves USB support for Jetson AGX Xavier. Furthermore this consolidates SD/MMC aliases on Tegra234 and provides correct configuration data for the MGBE Ethernet devices found on Tegra234 so that they can operate at full speed. * tag 'tegra-for-6.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Remove Jetson Orin NX and Jetson Orin Nano DTSI arm64: tegra: Add audio support for Jetson Orin NX and Jetson Orin Nano arm64: tegra: Define missing IO ports arm64: tegra: Move AHUB ports to SoC DTSI arm64: tegra: Add USB Type-C controller for Jetson AGX Xavier arm64: tegra: Add USB device support for Jetson AGX Xavier arm64: tegra: Add current monitors for Jetson Xavier arm64: tegra: Add AXI configuration for Tegra234 MGBE arm64: tegra: Use consistent SD/MMC aliases on Tegra234 arm64: tegra: Enable cros-ec-spi as wake source Link: https://lore.kernel.org/r/20240223174849.1509465-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'renesas-dts-for-v6.9-tag2' of ↵Arnd Bergmann14-42/+938
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.9 (take two) - Add pin control, I2C, GPIO, CA76 cluster, Ethernet, SD/MMC, DMA, and HyperFLASH/QSPI (RPC) support for the R-Car V4M SoC, - Add I2C EEPROM, Ethernet, eMMC, and QSPI FLASH support for the Gray Hawk Single development board, - Fix PCIe power on ULCB development boards equipped with the Shimafuji Kingfisher extension, - Add PSCI support for the RZ/G3S SoC, - Add camera support for the RZ/G2UL SMARC EVK development board, - Add display support for the RZ/G2L{,C} and RZ/V2L SoCs and SMARC EVK development boards, - Miscellaneous fixes and improvements, * tag 'renesas-dts-for-v6.9-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (31 commits) arm64: dts: renesas: rzg2l-smarc: Enable DU and link with DSI arm64: dts: renesas: r9a07g054: Add DU node arm64: dts: renesas: r9a07g044: Add DU node arm64: dts: renesas: gray-hawk-single: Add QSPI FLASH support arm64: dts: renesas: r8a779h0: Add RPC node arm64: dts: renesas: r8a779h0: Add DMA support arm64: dts: renesas: gray-hawk-single: Add eMMC support arm64: dts: renesas: r8a779h0: Add SD/MMC node ARM: dts: renesas: r8a7778: Add missing reg-names to sound node arm64: dts: renesas: rzg2ul-smarc: Enable CRU, CSI support arm64: dts: renesas: gray-hawk-single: Add Ethernet support arm64: dts: renesas: r8a779h0: Add Ethernet-AVB support arm64: dts: renesas: r8a779g0: Correct avb[01] reg sizes arm64: dts: renesas: r8a779a0: Correct avb[01] reg sizes arm64: dts: renesas: r9a08g045: Add PSCI support arm64: dts: renesas: rzg3s-smarc-som: Guard Ethernet IRQ GPIO hogs arm64: dts: renesas: r9a08g045: Add missing interrupts to IRQC node arm64: dts: renesas: rzg2l: Add missing interrupts to IRQC nodes arm64: dts: renesas: r8a779h0: Add CA76 operating points arm64: dts: renesas: r8a779h0: Add CPU core clocks ... Link: https://lore.kernel.org/r/cover.1708687134.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'v6.9-rockchip-dts64-1' of ↵Arnd Bergmann39-598/+3300
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards: Powkiddy RGB10MAX3, Pine64 PineTab2, NanoPi R6C+R6S, Anbernic RG-ARC S and RG-ARC D. New peripherals: rs485 on Theobroma Systems boards, usb3 on Indidroid Nova, Edgeble NCM6A (usb2, m.2, ethernet, wifi, cpu-regulator), Rock-5b rfkill for wifi, cache information for rk3399. Snmaller DT fixes (hdmi nodes, aliases, redundant card-detect gpios, max- frequency for spi-flashes on rock-pi 4 boards, missing pmu-io-domains on Ringneck) * tag 'v6.9-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (38 commits) arm64: dts: rockchip: Add USB3.0 to Indiedroid Nova arm64: dts: rockchip: adjust phy-handle name on rock-pi-e arm64: dts: rockchip: fix rk3399 hdmi ports node arm64: dts: rockchip: fix rk3328 hdmi ports node arm64: dts: rockchip: remove redundant cd-gpios from rk3588 sdmmc nodes arm64: dts: rockchip: add rs485 support on uart5 of px30-ringneck-haikou arm64: dts: rockchip: add rs485 support on uart2 of rk3399-puma-haikou arm64: dts: rockchip: Add Powkiddy RGB10MAX3 dt-bindings: arm: rockchip: Add Powkiddy RGB10MAX3 arm64: dts: rockchip: Update powkiddy rk2023 dtsi for RGB10MAX3 arm64: dts: rockchip: Add devicetree for Pine64 PineTab2 dt-bindings: arm64: rockchip: Add Pine64 PineTab2 arm64: dts: rockchip: Add Touch to Anbernic RG-ARC D arm64: dts: rockchip: fix nanopc-t6 sdmmc regulator arm64: dts: rockchip: remove duplicate SPI aliases for helios64 arm64: dts: rockchip: add spi controller aliases on rk3399 arm64: dts: rockchip: Add support for NanoPi R6C arm64: dts: rockchip: Add support for NanoPi R6S dt-bindings: arm: rockchip: Add NanoPi R6 series boards arm64: dts: rockchip: Increase maximum frequency of SPI flash for ROCK Pi 4A/B/C ... Link: https://lore.kernel.org/r/3622360.hdfAi7Kttb@diego Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'mtk-dts64-for-v6.9' of ↵Arnd Bergmann51-187/+4094
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt MediaTek ARM64 DeviceTree updates for v6.9 This adds support for the following new machines: - MT7981B: Xiaomi AX3000T - MT7986A: Acelink EW-7886CAX - MT7988A: BananaPi BPI-R4 - MT8186 Chromebooks: Tentacruel, Tentacool, Steelix, Rusty, Magneton - MT8395/MT8195: Radxa NIO 12L Also adds more support for the MediaTek MT8186 SoC's Video and JPEG encoders and for MT7988 clocks, enables wakeup support for the CrOS EC on SPI in all MediaTek Chromebooks, performs some cleanups and includes some spare fixes. * tag 'mtk-dts64-for-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (51 commits) arm64: dts: mt8195-cherry-tomato: change watchdog reset boot flow arm64: dts: mt7986: add port@5 as CPU port arm64: dts: mt7622: add port@5 as CPU port arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties arm64: dts: mediatek: replace underscores in node names arm64: dts: mediatek: mt8186: Add missing xhci clock to usb controllers arm64: dts: mediatek: mt8186: Add missing clocks to ssusb power domains arm64: dts: mediatek: mt7622: add missing "device_type" to memory nodes arm64: dts: mediatek: mt7986: reorder nodes arm64: dts: mediatek: mt7986: reorder properties arm64: dts: mediatek: Add Acelink EW-7886CAX dt-bindings: arm64: dts: mediatek: Add Acelink EW-7886CAX access point dt-bindings: vendor-prefixes: add acelink arm64: dts: mediatek: Introduce the MT8395 Radxa NIO 12L board dt-bindings: arm64: mediatek: Add MT8395 Radxa NIO 12L board compatible arm64: dts: mediatek: mt8186: Add video decoder device nodes arm64: dts: mediatek: mt8195: Add MTU3 nodes and correctly describe USB arm64: dts: mediatek: Add MT8186 Magneton Chromebooks arm64: dts: mediatek: Add MT8186 Steelix platform based Rusty arm64: dts: mediatek: Introduce MT8186 Steelix ... Link: https://lore.kernel.org/r/20240219131230.157792-1-angelogioacchino.delregno@collabora.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'samsung-dt64-6.9' of ↵Arnd Bergmann5-20/+203
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt Samsung DTS ARM64 changes for v6.9 Mostly work around Google GS101 SoC and Pixel phone (Oriole) adding support for: 1. Multi Core Timer (MCT) clocksource. 2. Several clock controllers (DTS and DT bindings) and use new clocks in several other device nodes. 3. More serial-interface instances: USI8 and USI12 with I2C. Exynos850: 1. SPI and DMA controllers (PL330). * tag 'samsung-dt64-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: fsd: Add fifosize for UART in Device Tree arm64: dts: exynos: gs101: minor whitespace cleanup arm64: dts: exynos: gs101: enable i2c bus 12 on gs101-oriole arm64: dts: exynos: gs101: define USI12 with I2C configuration arm64: dts: exynos: gs101: enable cmu-peric1 clock controller dt-bindings: clock: google,gs101-clock: add PERIC1 clock management unit arm64: dts: exynos: Add SPI nodes for Exynos850 arm64: dts: exynos: Add PDMA node for Exynos850 arm64: dts: exynos: gs101: use correct clocks for usi_uart arm64: dts: exynos: gs101: use correct clocks for usi8 arm64: dts: exynos: gs101: sysreg_peric0 needs a clock arm64: dts: exynos: gs101: enable eeprom on gs101-oriole arm64: dts: exynos: gs101: define USI8 with I2C configuration arm64: dts: exynos: gs101: update USI UART to use peric0 clocks arm64: dts: exynos: gs101: enable cmu-peric0 clock controller arm64: dts: exynos: gs101: remove reg-io-width from serial arm64: dts: exynos: gs101: define Multi Core Timer (MCT) node dt-bindings: clock: exynos850: Add PDMA clocks dt-bindings: clock: google,gs101-clock: add PERIC0 clock management unit Link: https://lore.kernel.org/r/20240218182141.31213-2-krzysztof.kozlowski@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29Merge tag 'renesas-dts-for-v6.9-tag1' of ↵Arnd Bergmann32-529/+1042
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.9 - Add GPIO keys and watchdog support for the RZ/G3S SMARC development board, - Add GNSS support for Renesas ULCB development boards equipped with the Shimafuji Kingfisher extension, - Add support for the standalone White Hawk CPU board, - Add support for the R-Car V4H ES2.0 (R8A779G2) SoC and the White Hawk Single development board, - Add initial support for the R-Car V4M (R8A779H0) SoC and the Gray Hawk Single development board, - Add camera support for the RZ/G2UL SoC, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (29 commits) arm64: dts: renesas: gray-hawk-single: Enable watchdog timer arm64: dts: renesas: r8a779h0: Add RWDT node arm64: dts: renesas: Improve TMU interrupt descriptions ARM: dts: renesas: Improve TMU interrupt descriptions arm64: dts: renesas: r9a07g043u: Add CSI and CRU nodes arm64: dts: renesas: Add Gray Hawk Single board support arm64: dts: renesas: Add Renesas R8A779H0 SoC support arm64: dts: renesas: rzg3s-smarc-som: Enable the watchdog interface arm64: dts: renesas: r9a08g045: Add watchdog node arm64: dts: renesas: r8a779g0: Add missing SCIF_CLK2 dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions dt-bindings: clock: renesas,cpg-mssr: Document R-Car V4M support dt-bindings: power: Add r8a779h0 SYSC power domain definitions dt-bindings: power: renesas,rcar-sysc: Document R-Car V4M support arm64: dts: renesas: r8a779g2: Add White Hawk Single support arm64: dts: renesas: Add Renesas R8A779G2 SoC support arm64: dts: renesas: white-hawk: Factor out common parts arm64: dts: renesas: white-hawk-cpu: Factor out common parts arm64: dts: renesas: white-hawk: Add SoC name to top-level comment arm64: dts: renesas: white-hawk: Drop SoC parts from sub boards ... Link: https://lore.kernel.org/r/cover.1707487834.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-02-29arm64: dts: st: add video encoder support to stm32mp255Hugues Fruchet2-0/+13
Add VENC hardware video encoder support to STM32MP255. Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-29arm64: dts: st: add video decoder support to stm32mp255Hugues Fruchet2-0/+16
Add VDEC hardware video decoder support to STM32MP255. Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-28arm64: dts: rockchip: Add basic support for QNAP TS-433Uwe Kleine-König2-0/+87
This is enough to make eMMC, networking, UART (console), RTC and a hard disk accessible. Still missing are (at least): USB, LEDs, regulators, fan. Signed-off-by: Uwe Kleine-König <ukleinek@debian.org> Link: https://lore.kernel.org/r/0d9fa5d730ac1cb91261b25b6809fcef3a12f03a.1709034476.git.ukleinek@debian.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-02-28arm64: dts: rockchip: add Haikou baseboard with RK3588-Q7 SoMHeiko Stuebner2-0/+267
Haikou is a Qseven and μQseven baseboard featuring PCIe, USB3 and a video connector for a MIPI-DSI/CSI adapter. This dts is for usage with the RK3588-Q7 SoM Tiger. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240227164659.705271-5-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-02-28arm64: dts: rockchip: add RK3588-Q7 (Tiger) SoMHeiko Stuebner1-0/+690
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3588. It provides the following feature set: * up to 16GB LPDDR4x * on-module eMMC * SD card (on a baseboard) via edge connector * Gigabit Ethernet with on-module GbE PHY * HDMI/eDP * MIPI-DSI * 4x MIPI-CSI (3x on FPC connectors, 1x over Q7) * HDMI input over FPC connector * CAN * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 host * PCIe - 1x PCIe 2.1 Gen3, 4 lanes - 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes * on-module ATtiny816 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) * on-module Secure Element with Global Platform 2.2.1 compliant JavaCard environment Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240227164659.705271-4-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-02-28arm64: dts: rockchip: drop rockchip,trcm-sync-tx-only from rk3588 i2sHeiko Stuebner1-2/+0
The rockchip,trcm-sync-tx-only property is at this time only documented for the tdm variant of Rockchip i2s controllers. While there was a series [0] adding code and binding for the property, it doesn't seem to have gone forward back in 2021. So for now fix the devicetree check by removing the property from rk3588 i2s controllers until support for it gets merged. [0] https://patchwork.kernel.org/project/linux-rockchip/patch/1629796734-4243-5-git-send-email-sugar.zhang@rock-chips.com/ Fixes: 8ae112a5554f ("arm64: dts: rockchip: Add rk3588s I2S nodes") Cc: Sugar Zhang <sugar.zhang@rock-chips.com> Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240227164659.705271-2-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-02-28arm64: dts: rockchip: fix reset-names for rk356x i2s2 controllerHeiko Stuebner1-1/+1
The dtbscheck reports a warning for a wrong reset-names property for the i2s2 controller on rk356x socs. The other controllers on the soc provide tx and rx directions and hence two resets and separate clocks for each direction, while i2s2 only provides one reset. This was so far named just "m" which isn't part of the binding. The clock-names the controller uses all end in "tx", so use the matching "tx-m" reset-name for the i2s controller. Fixes: 755f37010f3e ("arm64: dts: rockchip: RK356x: Add I2S2 device node") Acked-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240227173526.710056-2-heiko@sntech.de
2024-02-28arm64: dts: rockchip: add missing interrupt-names for rk356x vdpuHeiko Stuebner1-0/+1
The video-codec@fdea0400 was missing the interrupt-names property that is part of the binding. Add it. Fixes: 944be6fba401 ("arm64: dts: rockchip: Add VPU support for RK3568/RK3566") Cc: Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Acked-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240227173526.710056-1-heiko@sntech.de
2024-02-28arm64: dts: rockchip: add clock to vo1-grf syscon on rk3588Heiko Stuebner1-0/+1
The VO*-general-register-files need a clock, so add the correct one. Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20240227210521.724754-1-heiko@sntech.de
2024-02-28arm64: dts: rockchip: Add devicetree support for TB-RK3588X boardElon Zhang2-0/+689
Add board file for Rockchip Toybrick TB-RK3588X board. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB Memory LPDDR4x Mali G610MC4 GPU 2× MIPI-CSI0 Connector 1x 2Lanes PCIe3.0 Connector 1x SATA3.0 Connector 32GB eMMC Module 2x USB 2.0, 2x USB 3.0 1x HDMI Output, 1x HDMI Input 2x Ethernet Port Functions work normally: [1] USB2.0 Host [2] Ethernet0 with PHY RTL8211F More information can be obtained from the following websites: [1] https://t.rock-chips.com/en/wiki/EN/tb-rk3588x_en/index.html [2] http://t.rock-chips.com/ Reviewed-by: Weizhao Ouyang <weizhao.ouyang@arm.com> Signed-off-by: Elon Zhang <zhangzj@rock-chips.com> Link: https://lore.kernel.org/r/20240221022902.751528-1-zhangzj@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2024-02-28arm64: dts: rockchip: adjust vendor on orangepi rk3399 boardTim Lunn1-1/+1
Adjust compatible string to match the board vendor of Xunlong Signed-off-by: Tim Lunn <tim@feathertop.org> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240214040731.3069111-5-tim@feathertop.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-15 23:31:46 +0300