summaryrefslogtreecommitdiff
path: root/arch/avr32/configs/atstk1006_defconfig
AgeCommit message (Collapse)AuthorFilesLines
2017-05-01avr32: remove support for AVR32 architectureHans-Christian Noren Egtvedt1-160/+0
This patch drops support for AVR32 architecture from the Linux kernel. The AVR32 architecture is not keeping up with the development of the kernel, and since it shares so much of the drivers with Atmel ARM SoC, it is starting to hinder these drivers to develop swiftly. Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now Microchip). Finally, the GCC toolchain is stuck at version 4.2.x, and has not received any patches since the last release from Atmel; 4.2.4-atmel.1.1.3.avr32linux.1. When building kernel v4.10, this toolchain is no longer able to properly link the network stack. Haavard and I have came to the conclusion that we feel keeping AVR32 on life support offers more obstacles for Atmel ARMs, than it gives joy to AVR32 users. I also suspect there are very few AVR32 users left today, if anybody at all. Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: HÃ¥vard Skinnemoen <hskinnemoen@gmail.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-02-09avr32: update all default configurationsHans-Christian Egtvedt1-23/+7
This patch runs all the default configurations through make silentoldconfig and make savedefconfig to rinse out outdated kconfig entries. for config in arch/avr32/configs/*defconfig; do make ARCH=avr32 `basename $config` make ARCH=avr32 silentoldconfig make ARCH=avr32 savedefconfig cp defconfig $config done Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2014-07-09avr32: update defconfig to use the generic PWM frameworkAlexandre Belloni1-2/+3
Now that all boards have switched to the generic PWM framework, update the defconfigs to use it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-10avr32: Kill CONFIG_MTD_PARTITIONSEunbong Song1-1/+0
This patch removes CONFIG_MTD_PARTITIONS in config files for avr32. Because CONFIG_MTD_PARTITIONS was removed by commit 6a8a98b22b10f1560d5f90aded4a54234b9b2724. Signed-off-by: Eunbong Song <eunb.song@samsung.com> Acked-by: Hans-Christian Egtvedt <hegtvedt@cisco.com>
2013-04-10cpufreq: AVR32: move cpufreq driver to drivers/cpufreqViresh Kumar1-1/+1
This patch moves cpufreq driver of AVR32 based at32ap platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-08arch: Change defconfigs to point to g_mass_storage.Michal Nazarewicz1-1/+1
The File-backed Storage Gadget (g_file_storage) is being removed, since it has been replaced by Mass Storage Gadget (g_mass_storage). This commit changes defconfigs point to the new gadget. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> (AT91) Acked-by: Tony Lindgren <tony@atomide.com> (OMAP1) Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> (AVR32) Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-06-14avr32: set CONFIG_CC_OPTIMIZE_FOR_SIZE=y for all defconfigsHans-Christian Egtvedt1-0/+1
This patch makes sure the kconfig option CC_OPTIMIZE_FOR_SIZE is set to yes for all default configuration files. This ensures the kernel is optimized for size, and avoids potential relocation truncated to fit problems. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-01-13avr32: update default configuration files for Atmel boardsHans-Christian Egtvedt1-12/+9
This patch adjusts some values to make the default configuration for Atmel boards more similar, and adds missing values to enable required functions. Also remove defined symbols for functions not in use. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2011-01-13avr32: disable kprobes for all default configurationsHans-Christian Egtvedt1-1/+1
This patch will disable kprobes for all the default AVR32 board configurations. This works around a regression in kprobes which seems to be related to AVR32 is now lacking the struct kprobe_ctlblk. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
2010-08-15defconfig reductionSam Ravnborg1-1321/+0
Use the defconfig files generated by "make savedefconfig" for remaining defconfig files. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-12-14avr32: update default configurations for ATNGW100, ATSTK1002 and ATSTK1006Hans-Christian Egtvedt1-81/+216
This patch updates the default configuration for ATNGW100 (also for the EVKLCD10X configs), ATSTK1002 and ATSTK1006. By default all kernels will now have support for EXT2/3/4 out of the box, this is handy if the user wants to boot from SD-Card. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2009-01-26eeprom: More consistent symbol namesJean Delvare1-3/+3
Now that all EEPROM drivers live in the same place, let's harmonize their symbol names. Also fix eeprom's dependencies, it definitely needs sysfs, and is no longer experimental after many years in the kernel tree. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: David Brownell <dbrownell@users.sourceforge.net>
2009-01-06avr32: Remove DMATEST from defconfigsBen Nizette1-1/+1
In the defconfigs for ATNGW100 and ATSTK100[236] the DMA Test driver is compiled as a module. This means systems built with *_defconfig + CONFIG_MODULES=n are unusable as the 3 dma test channels monopolise the CPU. I 'spose Haavard uses this module a lot but IMO it isn't really something needed on all eval boards by default. Signed-off-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-12-18ATSTK1006: Fix boot from NAND flashHaavard Skinnemoen1-37/+97
Enable JFFS2 write buffer support so that the kernel can access a root filesystem in NAND flash. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
2008-08-08avr32: Update defconfigsHaavard Skinnemoen1-0/+1304
Enable power management, DMA and MMC on all boards except ATSTK1004, and add defconfig for the new ATSTK1006 board with NAND flash, UBI and UBIFS enabled as well. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>