summaryrefslogtreecommitdiff
path: root/drivers/clk/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2022-10-04Merge branches 'clk-baikal', 'clk-broadcom', 'clk-vc5' and 'clk-versaclock' ↵Stephen Boyd1-0/+9
into clk-next - Convert Baikal-T1 CCU driver to platform driver - Split reset support out of primary Baikal-T1 CCU driver - Add some missing clks required for RPiVid Video Decoder on RaspberryPi - Mark PLLC critical on bcm2835 - Support for Renesas VersaClock7 clock generator family * clk-baikal: clk: baikal-t1: Convert to platform device driver clk: baikal-t1: Add DDR/PCIe directly controlled resets support dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs clk: baikal-t1: Move reset-controls code into a dedicated module clk: baikal-t1: Add SATA internal ref clock buffer clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent clk: baikal-t1: Fix invalid xGMAC PTP clock divider clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD * clk-broadcom: clk: bcm: rpi: Add support for VEC clock clk: bcm: rpi: Handle pixel clock in firmware clk: bcm: rpi: Add support HEVC clock clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration clk: bcm2835: Round UART input clock up clk: bcm2835: Make peripheral PLLC critical * clk-vc5: clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975 dt-bindings: clock: vc5: Add 5P49V6975 clk: vc5: Use regmap_{set,clear}_bits() where appropriate clk: vc5: Check IO access results * clk-versaclock: clk: Renesas versaclock7 ccf device driver dt-bindings: Renesas versaclock7 device tree bindings
2022-10-04clk: allow building lan966x as a moduleClément Léger1-1/+1
Set the COMMON_CLK_LAN966X option as a tristate and switch from builtin_platform_driver() to module_platform_driver() to allow building and using this driver as a module. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220617103306.489466-1-clement.leger@bootlin.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-10-01clk: Renesas versaclock7 ccf device driverAlex Helms1-0/+9
Renesas Versaclock7 is a family of configurable clock generator ICs with fractional and integer dividers. This driver has basic support for the RC21008A device, a clock synthesizer with a crystal input and 8 outputs. The supports changing the FOD and IOD rates, and each output can be gated. Signed-off-by: Alex Helms <alexander.helms.jy@renesas.com> Link: https://lore.kernel.org/r/20220912183613.22213-3-alexander.helms.jy@renesas.com Tested-by: Saeed Nowshadi <saeed.nowshadi@amd.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-05-25Merge branches 'clk-rockchip', 'clk-ingenic', 'clk-bindings', 'clk-samsung' ↵Stephen Boyd1-0/+5
and 'clk-stm' into clk-next - Mark some clks critical on Ingenic X1000 - Add STM32MP13 RCC driver (Reset Clock Controller) * clk-rockchip: dt-bindings: clock: convert rockchip,rk3368-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3228-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3036-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3308-cru.txt to YAML dt-bindings: clock: convert rockchip,px30-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3188-cru.txt to YAML dt-bindings: clock: convert rockchip,rk3288-cru.txt to YAML dt-bindings: clock: convert rockchip,rv1108-cru.txt to YAML dt-binding: clock: Add missing rk3568 cru bindings clk: rockchip: Mark hclk_vo as critical on rk3568 dt-bindings: clock: fix rk3399 cru clock issues dt-bindings: clock: use generic node name for pmucru example in rockchip,rk3399-cru.yaml dt-bindings: clock: replace a maintainer for rockchip,rk3399-cru.yaml dt-bindings: clock: fix some conversion style issues for rockchip,rk3399-cru.yaml * clk-ingenic: clk: ingenic-tcu: Fix missing TCU clock for X1000 SoCs mips: ingenic: Do not manually reference the CPU clock clk: ingenic: Mark critical clocks in Ingenic SoCs clk: ingenic: Allow specifying common clock flags * clk-bindings: dt-bindings: clock: Replace common binding with link to schema * clk-samsung: dt-bindings: clock: exynosautov9: correct count of NR_CLK clk: samsung: exynosautov9: add cmu_peric1 clock support clk: samsung: exynosautov9: add cmu_peric0 clock support clk: samsung: exynosautov9: add cmu_fsys2 clock support clk: samsung: exynosautov9: add cmu_busmc clock support clk: samsung: exynosautov9: add cmu_peris clock support clk: samsung: exynosautov9: add cmu_core clock support clk: samsung: add top clock support for Exynos Auto v9 SoC dt-bindings: clock: add Exynos Auto v9 SoC CMU bindings dt-bindings: clock: add clock binding definitions for Exynos Auto v9 * clk-stm: clk: stm32mp13: add safe mux management clk: stm32mp13: add multi mux function clk: stm32mp13: add all STM32MP13 kernel clocks clk: stm32mp13: add all STM32MP13 peripheral clocks clk: stm32mp13: manage secured clocks clk: stm32mp13: add composite clock clk: stm32mp13: add stm32 divider clock clk: stm32mp13: add stm32_gate management clk: stm32mp13: add stm32_mux clock management clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller) dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
2022-05-21clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)Gabriel Fernandez1-0/+5
This driver manages Reset and Clock of STM32MP13 soc. It uses a clk-stm32-core module to manage stm32 gate, mux and divider for STM32MP13 and for new future soc. All gates, muxes, dividers are identify by an index and information are stored in array (register address, shift, with, flags...) This is useful when we have two clocks with the same gate or when one mux manages two output clocks. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20220516070600.7692-3-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-04-23clk: en7523: Add clock driver for Airoha EN7523 SoCFelix Fietkau1-0/+9
This driver only registers fixed rate clocks, since the clocks are fully initialized by the boot loader and should not be changed later, according to Airoha. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20220314084409.84394-3-nbd@nbd.name Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-30Merge tag 'clk-for-linus' of ↵Linus Torvalds1-3/+36
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd1-0/+16
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd1-0/+1
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-29Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' ↵Stephen Boyd1-0/+18
into clk-next - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks
2022-03-19clk: rs9: Add Renesas 9-series PCIe clock generator driverMarek Vasut1-0/+9
Add driver for Renesas 9-series PCIe clock generators. This driver is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C PCIe clock generators, currently the only tested and supported chip is 9FGV0241. The driver is capable of configuring per-chip spread spectrum mode and output amplitude, as well as per-output slew rate. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@kernel.org> Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de [sboyd@kernel.org: Use non-underscore API for fixed factor] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-15clk: clk-apple-nco: Allow and fix module buildingMartin Povišer1-1/+1
Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220312135722.20770-1-povik+lin@cutebit.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: clk-apple-nco: Add driver for Apple NCOMartin Povišer1-0/+9
Add a common clock driver for NCO blocks found on Apple SoCs where they are typically the generators of audio clocks. Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220208183411.61090-3-povik+lin@cutebit.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: microchip: Add driver for Microchip PolarFire SoCDaire McNamara1-3/+1
Add support for clock configuration on Microchip PolarFire SoC Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Co-developed-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Padmarao Begari <padmarao.begari@microchip.com> Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com> Co-developed-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220222121143.3316880-2-conor.dooley@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: COMMON_CLK_LAN966X should depend on SOC_LAN966Geert Uytterhoeven1-0/+1
The LAN966x Generic Clock Controller is only present on Microchip LAN966x SoCs. Hence add a dependency on SOC_LAN966, to prevent asking the user about this driver when configuring a kernel without LAN966x SoC support. Fixes: 54104ee023333e3b ("clk: lan966x: Add lan966x SoC clock driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/eb102eae05e5667b9bd342a0c387f7f262d24bda.1645716471.git.geert+renesas@glider.be Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-03-12clk: Introduce Kunit Tests for the frameworkMaxime Ripard1-0/+7
Let's test various parts of the rate-related clock API with the kunit testing framework. Cc: kunit-dev@googlegroups.com Tested-by: Daniel Latypov <dlatypov@google.com> Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-3-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-02-25clk: lan966x: Fix linking errorHoratiu Vultur1-0/+2
If the config options HAS_IOMEM is not set then the driver fails to link with the following error: clk-lan966x.c:(.text+0x950): undefined reference to `devm_platform_ioremap_resource' Therefor add missing dependencies: HAS_IOMEM and OF. Fixes: 54104ee02333 ("clk: lan966x: Add lan966x SoC clock driver") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20220219141536.460812-1-horatiu.vultur@microchip.com Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-26clk: cs2000-cp: convert driver to regmapDaniel Mack1-0/+1
Regmap gives us caching, debugging infrastructure and other things for free and does away with open-coded bit-fiddling implementations. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20220125093336.226787-10-daniel@zonque.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-25clk: gate: Add some kunit test suitesStephen Boyd1-0/+8
Test various parts of the clk gate implementation with the kunit testing framework. Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Acked-by: Daniel Latypov <dlatypov@google.com> Cc: <kunit-dev@googlegroups.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220120175902.2165958-1-sboyd@kernel.org
2022-01-13Merge tag 'clk-for-linus' of ↵Linus Torvalds1-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...
2022-01-12Merge branches 'clk-socfpga', 'clk-toshiba', 'clk-st' and 'clk-bitmain' into ↵Stephen Boyd1-10/+1
clk-next - Clock and reset driver for Toshiba Visconti SoCs * clk-socfpga: clk: socfpga: s10: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: agilex: Make use of the helper function devm_platform_ioremap_resource() clk: socfpga: remove redundant assignment after a mask operation clk: socfpga: remove redundant assignment on division * clk-toshiba: clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver dt-bindings: clock: Add DT bindings for SMU of Toshiba Visconti TMPV770x SoC dt-bindings: clock: Add DT bindings for PLL of Toshiba Visconti TMPV770x SoC * clk-st: clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent * clk-bitmain: clk: bm1880: remove kfrees on static allocations
2022-01-12Merge branches 'clk-x86', 'clk-stm', 'clk-amlogic' and 'clk-allwinner' into ↵Stephen Boyd1-0/+8
clk-next * clk-x86: clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: Introduce clk-tps68470 driver platform/x86: int3472: Deal with probe ordering issues platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Add get_sensor_adev_and_name() helper platform/x86: int3472: Split into 2 drivers platform_data: Add linux/platform_data/tps68470.h file i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function i2c: acpi: Use acpi_dev_ready_for_enumeration() helper ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device * clk-stm: clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell * clk-amlogic: clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB * clk-allwinner: clk: sunxi-ng: Add support for the D1 SoC clocks clk: sunxi-ng: gate: Add macros for gates with fixed dividers clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw dt-bindings: clk: Add compatibles for D1 CCUs clk: sunxi-ng: Allow the CCU core to be built as a module clk: sunxi-ng: Convert early providers to platform drivers clk: sunxi-ng: Allow drivers to be built as modules clk: sunxi-ng: Export symbols used by CCU drivers
2022-01-06clk: Drop unused COMMON_CLK_STM32MP157_SCMI configSudeep Holla1-10/+0
Commit 21e743300dd0 ("clk: stm32mp1: new compatible for secure RCC support") introduced a new Kconfig option COMMON_CLK_STM32MP157_SCMI which is not used anywhere. Further, it looks like this Kconfig option is just to select bunch of other options which doesn't sound correct to me. There is no need for another SCMI firmware based clock driver and hence the same applies for the config option too. Let us just drop the unused COMMON_CLK_STM32MP157_SCMI before it gives someone idea to write a specific clock driver for this SoC/platform. Cc: Etienne Carriere <etienne.carriere@foss.st.com> Cc: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Cc: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Link: https://lore.kernel.org/r/20211015150043.140793-1-sudeep.holla@arm.com Reviewed-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2022-01-06clk: visconti: Add support common clock driver and reset driverNobuhiro Iwamatsu1-0/+1
Add support for common interface of the common clock and reset driver for Toshiba Visconti5 and its SoC, TMPV7708. The PIPLLCT provides the PLL, and the PISMU provides clock and reset functionality. Each drivers are provided in this patch. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Link: https://lore.kernel.org/r/20211025031038.4180686-4-nobuhiro1.iwamatsu@toshiba.co.jp [sboyd@kernel.org: Add bitfield.h include to pll.c] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-16clk: starfive: Add JH7100 clock generator driverGeert Uytterhoeven1-0/+1
Add a driver for the StarFive JH7100 clock generator. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Co-developed-by: Emil Renner Berthing <kernel@esmil.dk> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
2021-12-16clk: Introduce clk-tps68470 driverHans de Goede1-0/+8
The TPS68470 PMIC provides Clocks, GPIOs and Regulators. At present in the kernel the Regulators and Clocks are controlled by an OpRegion driver designed to work with power control methods defined in ACPI, but some platforms lack those methods, meaning drivers need to be able to consume the resources of these chips through the usual frameworks. This commit adds a driver for the clocks provided by the tps68470, and is designed to bind to the platform_device registered by the intel_skl_int3472 module. This is based on this out of tree driver written by Intel: https://github.com/intel/linux-intel-lts/blob/4.14/base/drivers/clk/clk-tps68470.c with various cleanups added. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211203102857.44539-7-hdegoede@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-12-08clk: lan966x: Add lan966x SoC clock driverKavyasree Kotagiri1-0/+7
This adds Generic Clock Controller driver for lan966x SoC. Lan966x clock controller contains 3 PLLs - cpu_clk, ddr_clk and sys_clk. It generates and supplies clock to various peripherals within SoC. Register settings required to provide GCK clocking to a peripheral is as below: GCK_SRC_SEL = Select clock source. GCK_PRESCALER = Set divider value. GCK_ENA = 1 - Enable GCK clock. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211103061935.25677-4-kavyasree.kotagiri@microchip.com
2021-08-12clk: pistachio: Make it selectable for generic MIPS kernelJiaxun Yang1-0/+1
We're moving pistachio to generic MIPS kernel. The clk driver should be avilable to the generic MIPS kernel. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-06-29Merge branches 'clk-lmk04832', 'clk-stm', 'clk-rohm', 'clk-actions' and ↵Stephen Boyd1-3/+21
'clk-ingenic' into clk-next - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs - Support secure mode of STM32MP1 SoCs - Improve clock support for Actions S500 SoC * clk-lmk04832: clk: lmk04832: Use of match table clk: lmk04832: Depend on SPI clk: lmk04832: add support for digital delay clk: add support for the lmk04832 dt-bindings: clock: add ti,lmk04832 bindings * clk-stm: clk: stm32mp1: new compatible for secure RCC support dt-bindings: clock: stm32mp1 new compatible for secure rcc dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15 dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15 dt-bindings: clock: add IDs for SCMI clocks on stm32mp15 reset: stm32mp1: remove stm32mp1 reset clk: stm32mp1: move RCC reset controller into RCC clock driver clk: stm32mp1: convert to module driver clk: stm32mp1: remove intermediate pll clocks clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock * clk-rohm: clk: bd718xx: Drop BD70528 support * clk-actions: clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC dt-bindings: clock: Add NIC and ETHERNET bindings for Actions S500 SoC clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC clk: actions: Fix SD clocks factor table on Owl S500 SoC clk: actions: Fix UART clock dividers on Owl S500 SoC * clk-ingenic: clk: ingenic: Add support for the JZ4760 clk: ingenic: Support overriding PLLs M/N/OD calc algorithm clk: ingenic: Remove pll_info.no_bypass_bit clk: ingenic: Read bypass register only when there is one clk: Support bypassing dividers dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
2021-06-29clk: lmk04832: Depend on SPIStephen Boyd1-0/+1
This driver depends on SPI. Otherwise compilation fails clk-lmk04832.c:(.text+0x1668): undefined reference to `spi_get_device_id' Reported-by: kernel test robot <lkp@intel.com> Cc: Liam Beguin <lvb@xiphos.com> Fixes: 3bc61cfd6f4a ("clk: add support for the lmk04832") Link: https://lore.kernel.org/r/20210629060751.3119453-1-sboyd@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-29clk: stm32mp1: new compatible for secure RCC supportGabriel Fernandez1-0/+10
Platform STM32MP1 can be used in configuration where some clock resources cannot be accessed by Linux kernel when executing in non-secure state of the CPU(s). In such configuration, the RCC clock driver must not register clocks it cannot access. They are expected to be registered from another clock driver such as the SCMI clock driver. This change uses specific compatible string "st,stm32mp1-rcc-secure" to specify RCC clock driver configuration where RCC is secure. Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Link: https://lore.kernel.org/r/20210617051814.12018-12-gabriel.fernandez@foss.st.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28clk: bd718xx: Drop BD70528 supportMatti Vaittinen1-3/+3
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/937ed0828486a08e2d00bce2815d491c1c9c49b4.1621937490.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-28clk: add support for the lmk04832Liam Beguin1-0/+7
The LMK04832 is an ultra-high performance clock conditioner with JEDEC JESD204B support and is also pin compatible with the LMK0482x family of devices. Signed-off-by: Liam Beguin <lvb@xiphos.com> Link: https://lore.kernel.org/r/20210423004057.283926-2-liambeguin@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08clkdev: remove CONFIG_CLKDEV_LOOKUPArnd Bergmann1-5/+1
This option is now synonymous with CONFIG_HAVE_CLK, so use the latter globally. Any out-of-tree platform ports that still use a private clk_get()/clk_put() implementation should move to CONFIG_COMMON_CLK. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-29Merge tag 'clk-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "Here's a collection of largely clk driver updates. The usual suspects are here: i.MX, Qualcomm, Renesas, Allwinner, Samsung, and Rockchip, but it feels pretty light on commits. There's only one real commit to the framework core and that's to consolidate code. Otherwise the diffstat is dominated by many Qualcomm clk driver patches that modernize the driver for the proper way of speciying clk parents. That's shifting data around, which could subtly break things so I'll be on the lookout for fixes. New Drivers: - Proper clk driver for Mediatek MT7621 SoCs - Support for the clock controller on the new Rockchip rk3568 Updates: - Simplify Zynq Kconfig dependencies - Use clk_hw pointers in socfpga driver - Cleanup parent data in qcom clk drivers - Some cleanups for rk3399 modularization - Fix reparenting of i.MX UART clocks by initializing only the ones associated to stdout - Correct the PCIE clocks for i.MX8MP and i.MX8MQ - Make i.MX LPCG and SCU clocks return on registering failure - Kernel doc fixes - Add DAB hardware accelerator clocks on Renesas R-Car E3 and M3-N - Add timer (TMU) clocks on Renesas R-Car H3 ES1.0 - Add Timer (TMU & CMT) and thermal sensor (TSC) clocks on Renesas R-Car V3U - Sigma-delta modulation on Allwinner V3s audio PLL" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (82 commits) MAINTAINERS: add MT7621 CLOCK maintainer staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk' staging: mt7621-dts: make use of new 'mt7621-clk' clk: ralink: add clock driver for mt7621 SoC clk: uniphier: Fix potential infinite loop clk: qcom: rpmh: add support for SDX55 rpmh IPA clock clk: qcom: gcc-sdm845: get rid of the test clock clk: qcom: convert SDM845 Global Clock Controller to parent_data dt-bindings: clock: separate SDM845 GCC clock bindings clk: qcom: apss-ipq-pll: Add missing MODULE_DEVICE_TABLE clk: qcom: a53-pll: Add missing MODULE_DEVICE_TABLE clk: qcom: a7-pll: Add missing MODULE_DEVICE_TABLE dt: bindings: add mt7621-sysc device tree binding documentation dt-bindings: clock: add dt binding header for mt7621 clocks clk: samsung: Remove redundant dev_err calls clk: zynqmp: pll: add set_pll_mode to check condition in zynqmp_pll_enable clk: zynqmp: move zynqmp_pll_set_mode out of round_rate callback clk: zynqmp: Drop dependency on ARCH_ZYNQMP clk: zynqmp: Enable the driver if ZYNQMP_FIRMWARE is selected clk: qcom: gcc-sm8350: use ARRAY_SIZE instead of specifying num_parents ...
2021-04-13clk: ralink: add clock driver for mt7621 SoCSergio Paracuellos1-0/+1
The documentation for this SOC only talks about two registers regarding to the clocks: * SYSC_REG_CPLL_CLKCFG0 - provides some information about boostrapped refclock. PLL and dividers used for CPU and some sort of BUS. * SYSC_REG_CPLL_CLKCFG1 - a banch of gates to enable/disable clocks for all or some ip cores. Looking into driver code, and some openWRT patched there are another frequencies which are used in some drivers (uart, sd...). According to all of this information the clock plan for this SoC is set as follows: - Main top clock "xtal" from where all the rest of the world is derived. - CPU clock "cpu" derived from "xtal" frequencies and a bunch of register reads and predividers. - BUS clock "bus" derived from "cpu" and with (cpu / 4) MHz. - Fixed clocks from "xtal": * "50m": 50 MHz. * "125m": 125 MHz. * "150m": 150 MHz. * "250m": 250 MHz. * "270m": 270 MHz. We also have a buch of gate clocks with their parents: * "hsdma": "150m" * "fe": "250m" * "sp_divtx": "270m" * "timer": "50m" * "pcm": "270m" * "pio": "50m" * "gdma": "bus" * "nand": "125m" * "i2c": "50m" * "i2s": "270m" * "spi": "bus" * "uart1": "50m" * "uart2": "50m" * "uart3": "50m" * "eth": "50m" * "pcie0": "125m" * "pcie1": "125m" * "pcie2": "125m" * "crypto": "250m" * "shxc": "50m" With this information the clk driver will provide clock and gates functionality from a a set of hardcoded clocks allowing to define a nice device tree without fixed clocks. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20210410055059.13518-2-sergio.paracuellos@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-03-23clk: socfpga: allow building N5X clocks with ARCH_N5XKrzysztof Kozlowski1-0/+1
The Intel's eASIC N5X (ARCH_N5X) architecture shares a lot with Agilex (ARCH_AGILEX) so it uses the same socfpga_agilex.dtsi, with minor changes. Also the clock drivers are the same. However the clock drivers won't be build without ARCH_AGILEX. One could assume that ARCH_N5X simply depends on ARCH_AGILEX but this was not modeled in Kconfig. In current stage the ARCH_N5X is simply unbootable. Add a separate Kconfig entry for clocks used by both ARCH_N5X and ARCH_AGILEX so the necessary objects will be built if either of them is selected. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-23clk: Add RISC-V Canaan Kendryte K210 clock driverDamien Le Moal1-0/+7
Add a clock provider driver for the Canaan Kendryte K210 RISC-V SoC. This new driver with the compatible string "canaan,k210-clk" implements support for the full clock structure of the K210 SoC. Since it is required for the correct operation of the SoC, this driver is selected by default for compilation when the SOC_CANAAN option is selected. With this change, the k210-sysctl driver is turned into a simple platform driver which enables its power bus clock and triggers populating its child nodes. The sysctl driver retains the SOC early initialization code, but the implementation now relies on the new function k210_clk_early_init() provided by the new clk-k210 driver. The clock structure implemented and many of the coding ideas for the driver come from the work by Sean Anderson on the K210 support for the U-Boot project. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-17Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' ↵Stephen Boyd1-0/+1
into clk-next - PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - Video clk fixups on Qualcomm SM8250 - GPU clks for Qualcomm SDM660/SDM630 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ * clk-socfpga: clk: socfpga: agilex: add clock driver for eASIC N5X platform dt-bindings: documentation: add clock bindings information for eASIC N5X * clk-mstar: clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: mstar: MStar/SigmaStar MPLL driver clk: fixed: add devm helper for clk_hw_register_fixed_factor() dt-bindings: clk: mstar msc313 mpll binding description dt-bindings: clk: mstar msc313 mpll binding header * clk-qcom: (42 commits) clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical ... * clk-warnings: (27 commits) clk: zynq: clkc: Remove various instances of an unused variable 'clk' clk: versatile: clk-icst: Fix worthy struct documentation block clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore' clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one clk: st: clkgen-pll: Demote unpopulated kernel-doc header clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc' clk: socfpga: clk-pll: Remove unused variable 'rc' clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used clk: bcm: clk-iproc-pll: Demote kernel-doc abuse clk: zynqmp: divider: Add missing description for 'max_div' clk: spear: Move prototype to accessible header clk: qcom: clk-rpm: Remove a bunch of superfluous code clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags' clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}' clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx' clk: clk-fixed-mmio: Demote obvious kernel-doc abuse clk: qcom: gcc-ipq4019: Remove unused variable 'ret' ...
2021-02-14clk: mstar: MStar/SigmaStar MPLL driverDaniel Palmer1-0/+1
This adds a basic driver for the MPLL block found in MStar/SigmaStar ARMv7 SoCs. Currently this driver is only good for calculating the rates of it's outputs and the actual configuration must be done before the kernel boots. Usually this is done even before u-boot starts. This driver targets the MPLL block found in the MSC313/MSC313E but there is no documentation this chip so the register descriptions for the another MStar chip the MST786 were used as they seem to match. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/r/20210211052206.2955988-5-daniel@0x0f.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-09clk: xilinx: move xlnx_vcu clock driver from socMichael Tretter1-0/+1
The xlnx_vcu driver is actually a clock controller driver which provides clocks that can be used by a driver for the encoder/decoder units. There is no reason to keep this driver in soc. Move the driver to clk. NOTE: The register mapping actually contains registers for AXI performance monitoring, but these are not used by the driver. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-16-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-09clk: axi-clkgen: replace ARCH dependencies with driver depsAlexandru Ardelean1-1/+2
The intent is to be able to run this driver to access the IP core in setups where FPGA board is also connected via a PCIe bus. In such cases the number of combinations explodes, where the host system can be an x86 with Xilinx Zynq/ZynqMP/Microblaze board connected via PCIe. Or even a ZynqMP board with a ZynqMP/Zynq/Microblaze connected via PCIe. To accommodate for these cases, this change removes the limitation for this driver to be compilable only on Zynq/Microblaze architectures. And adds dependencies on the mechanisms required by the driver to work (OF and HAS_IOMEM). Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210201151245.21845-2-alexandru.ardelean@analog.com Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-08clk: fsl-flexspi: new driverMichael Walle1-0/+8
Add support for the FlexSPI clock on Freescale Layerscape SoCs. The clock is a simple divider based one and is located inside the device configuration space (DCFG). This will allow switching the SCK frequencies for the FlexSPI interface on the LS1028A and the LX2160A. Signed-off-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20201108185113.31377-8-michael@walle.cc [sboyd@kernel.org: Drop modalias, add module table] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-08clk: qoriq: Add platform dependenciesGeert Uytterhoeven1-1/+2
The Freescale QorIQ clock controller is only present on Freescale E500MC and Layerscape SoCs. Add platform dependencies to the CLK_QORIQ config symbol, to avoid asking the user about it when configuring a kernel without E500MC or Layerscape support. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Li Yang <leoyang.li@nxp.com> Link: https://lore.kernel.org/r/20201110154750.3285411-1-geert+renesas@glider.be Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-10-20Merge branches 'clk-ingenic', 'clk-at91', 'clk-kconfig', 'clk-imx', ↵Stephen Boyd1-1/+1
'clk-qcom', 'clk-prima2' and 'clk-bcm' into clk-next - Support qcom SM8150/SM8250 video and display clks - Change how qcom's display port clks work * clk-ingenic: clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL clk: ingenic: Use readl_poll_timeout instead of custom loop clk: ingenic: Use to_clk_info() macro for all clocks * clk-at91: clk: at91: sam9x60: support only two programmable clocks clk: at91: clk-sam9x60-pll: remove unused variable clk: at91: clk-main: update key before writing AT91_CKGR_MOR clk: at91: remove the checking of parent_name * clk-kconfig: clk: Restrict CLK_HSDK to ARC_SOC_HSDK * clk-imx: clk: imx8mq: Fix usdhc parents order clk: imx: imx21: Remove clock driver clk: imx: gate2: Fix a few typos clk: imx: Fix and update kerneldoc clk: imx: fix i.MX7D peripheral clk mux flags clk: imx: fix composite peripheral flags clk: imx: Correct the memrepair clock on imx8mp clk: imx: Correct the root clk of media ldb on imx8mp clk: imx: vf610: Add CRC clock clk: imx: Explicitly include bits.h clk: imx8qxp: Support building i.MX8QXP clock driver as module clk: imx8m: Support module build clk: imx: Add clock configuration for ARMv7 platforms clk: imx: Support building i.MX common clock driver as module clk: composite: Export clk_hw_register_composite() clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits * clk-qcom: clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on clk: qcom: Add display clock controller driver for SM8150 and SM8250 dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings clk: qcom: add video clock controller driver for SM8250 clk: qcom: add video clock controller driver for SM8150 dt-bindings: clock: add SM8250 QCOM video clock bindings dt-bindings: clock: add SM8150 QCOM video clock bindings dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs clk/qcom: fix spelling typo clk: qcom: gcc-sdm660: Fix wrong parent_map clk: qcom: dispcc: Update DP clk ops for phy design clk: qcom: gcc-msm8939: remove defined but not used variables clk: qcom: ipq8074: make pcie0_rchng_clk_src static * clk-prima2: clk: clk-prima2: fix return value check in prima2_clk_init() * clk-bcm: clk: bcm2835: add missing release if devm_clk_hw_register fails clk: bcm: rpi: Add register to control pixel bvb clk
2020-10-14clk: Restrict CLK_HSDK to ARC_SOC_HSDKGeert Uytterhoeven1-1/+1
The HSDK PLL driver is only useful when building for an ARC HSDK platform. As ARC selects OF, the dependency on OF can just be replaced by a dependency on ARC_SOC_HSDK. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200807094351.1046-1-geert+renesas@glider.be Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-09-22clk: rockchip: fix the clk config to support module buildElaine Zhang1-0/+1
use CONFIG_COMMON_CLK_ROCKCHIP for Rk common clk drivers. use CONFIG_CLK_RKXX for Rk soc clk driver. Mark CONFIG_CLK_RK3399 to "tristate", to support building Rk3399 SoC clock driver as module. Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20200914022304.23908-1-zhangqing@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-08-03clk: hsdk: Fix bad dependency on IOMEMGeert Uytterhoeven1-1/+1
CONFIG_IOMEM does not exist. The correct symbol to depend on is CONFIG_HAS_IOMEM. Fixes: 1e7468bd9d30a21e ("clk: Specify IOMEM dependency for HSDK pll driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200803084835.21838-1-geert+renesas@glider.be Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-03Merge branch 'clk-fixes' into clk-kconfigStephen Boyd1-0/+1
Need to merge this up to get the IOMEM dependency patch on top that is broken and fixed in the next commit. * clk-fixes: clk: Specify IOMEM dependency for HSDK pll driver clk: AST2600: Add mux for EMMC clock clk: mvebu: ARMADA_AP_CPU_CLK needs to select ARMADA_AP_CP_HELPER
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-15 09:22:40 +0300