summaryrefslogtreecommitdiff
path: root/include/linux/sh_intc.h
AgeCommit message (Collapse)AuthorFilesLines
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-22sh: intc: Kill off special reservation interface.Paul Mundt1-1/+0
At present reserving the IRLs in the IRQ bitmap in addition to the dropping of the legacy IRQ pre-allocation prevent IRL IRQs from being allocated for the x3proto board. The only reason to permit reservations was to lock down possible hardware vectors prior to dynamic IRQ scanning, but this doesn't matter much given that the hardware controller configuration is sorted before we get around to doing any dynamic IRQ allocation anyways. Beyond that, all of the tables are __init annotated, so quite a bit more work would need to be done to support reconfiguring things like IRL controllers on the fly, much more than would ever make it worth the hassle. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-26sh: intc: remove dependency on NR_IRQSRob Herring1-0/+6
SH intc has a compile time dependency on NR_IRQS. Make this dependency a local define so that shmobile (and ARM in general) can have run-time NR_IRQS setting. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-01-26sh: intc: unify evt2irq/irq2evt macros for sh and armRob Herring1-0/+11
Move evt2irq and irq2evt macros definitions out of sh and arm includes into a common location. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2011-12-26PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resumeRafael J. Wysocki1-0/+1
Since the SH7372's INTCS in included into syscore suspend/resume, which causes the chip to be accessed when PM domains have been turned off during system suspend, the A4R domain containing the INTCS has to stay on during system sleep, which is suboptimal from the power consumption point of view. For this reason, add a new INTC flag, skip_syscore_suspend, to mark the INTCS for intc_suspend() and intc_resume(), so that they don't touch it. This allows the A4R domain to be turned off during system suspend and the INTCS state is resrored during system resume by the A4R's "power on" code. Suggested-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2010-11-09sh: intc: Fix up initializers for gcc 4.5.Paul Mundt1-1/+1
The _INTC_ARRAY() initializer presently does a NULL test which blows up as a non-constant initializer under gcc 4.5. This switches over to a type test to account for NULL initializers explicitly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-26sh: Switch dynamic IRQ creation to generic irq allocator.Paul Mundt1-3/+0
Now that the genirq code provides an IRQ bitmap of its own and the necessary API to manipulate it, there's no need to keep our own version around anymore. In the process we kill off some unused IRQ reservation code, with future users now having to tie in to the genirq API as normal. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: intc: Split up the INTC code.Paul Mundt1-1/+1
This splits up the sh intc core in to something more vaguely resembling a subsystem. Most of the functionality was alread fairly well compartmentalized, and there were only a handful of interdependencies that needed to be resolved in the process. This also serves as future-proofing for the genirq and sparseirq rework, which will make some of the split out functionality wholly generic, allowing things to be killed off in place with minimal migration pain. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05sh: intc: Handle early lookups of subgroup IRQs.Paul Mundt1-1/+1
If lookups happen while the radix node still points to a subgroup mapping, an IRQ hasn't yet been made available for the specified id, so error out accordingly. Once the slot is replaced with an IRQ mapping and the tag is discarded, lookup can commence as normal. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: intc: Support virtual mappings for IRQ subgroups.Paul Mundt1-1/+11
Many interrupts that share a single mask source but are on different hardware vectors will have an associated register tied to an INTEVT that denotes the precise cause for the interrupt exception being triggered. This introduces the concept of IRQ subgroups in the intc core, where a virtual IRQ map is constructed for each of the pre-defined cause bits, and a higher level chained handler takes control of the parent INTEVT. This enables CPUs with heavily muxed IRQ vectors (especially across disjoint blocks) to break things out in to a series of managed chained handlers while being able to dynamically lookup and adopt the IRQs created for them. This is largely an opt-in interface, requiring CPUs to manually submit IRQs for subgroup splitting, in addition to providing identifiers in their enum maps that can be used for lazy lookup via the radix tree. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-04sh: intc: Implement reverse mapping for IRQs to per-controller IDs.Paul Mundt1-0/+1
This implements a scheme roughly analogous to the PowerPC virtual to hardware IRQ mapping, which we use for IRQ to per-controller ID mapping. This makes it possible for drivers to use the IDs directly for lookup instead of hardcoding the vector. The main motivation for this work is as a building block for dynamically allocating virtual IRQs for demuxing INTC events sharing a single INTEVT in addition to a common masking source. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-02sh: Support early IRQ vector map reservation for delayed controllers.Paul Mundt1-0/+1
Some controllers will need to be initialized lazily due to pinmux constraints, while others may simply have no need to be brought online if there are no backing devices for them attached. In this case it's still necessary to be able to reserve their hardware vector map before dynamic IRQs get a hold of them. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-15sh: intc: IRQ auto-distribution support.Paul Mundt1-1/+10
This implements support for hardware-managed IRQ balancing as implemented by SH-X3 cores (presently only hooked up for SH7786, but can probably be carried over to other SH-X3 cores, too). CPUs need to specify their distribution register along with the mask definitions, as these follow the same format. Peripheral IRQs that don't opt out of balancing will be automatically distributed at the whim of the hardware block, while each CPU needs to verify whether it is handling the IRQ or not, especially before clearing the mask. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-04-13sh: intc: userimask support.Paul Mundt1-0/+9
This adds support for hardware-assisted userspace irq masking for special priority levels. Due to the SR.IMASK interactivity, only some platforms implement this in hardware (including but not limited to SH-4A interrupt controllers, and ARM-based SH-Mobile CPUs). Each CPU needs to wire this up on its own, for now only SH7786 is wired up as an example. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-19sh: INTC ioremap supportMagnus Damm1-0/+4
Extend the INTC code with ioremap() support V2. Support INTC controllers that are not accessible through a 1:1 virt:phys window. Needed by SH-Mobile ARM INTCS. The INTC code behaves as usual if the io window resource is omitted. The slow phys->virt lookup only happens during setup. The fast path code operates on virtual addresses. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-19sh: add INTC out of memory error handlingMagnus Damm1-1/+1
Extend the INTC code to warn and return an error code in the case of memory allocation failure. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-16sh: extend INTC with force_disableMagnus Damm1-0/+1
Extend the shared INTC code with force_disable support to allow keeping mask bits statically disabled. Needed for SDHI support to mask out unsupported interrupt sources. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: extend INTC with force_enableMagnus Damm1-0/+1
Extend the shared INTC code with force_enable support to allow keeping mask bits statically enabled. Needed by upcoming INTC SDHI patches that mux together a bunch of vectors to a single linux interrupt which is masked by a priority register, but needs individual mask bits constantly enabled. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-09sh: extend INTC with struct intc_hw_descMagnus Damm1-11/+20
This patch updates the INTC code by moving all vectors, groups and registers from struct intc_desc to struct intc_hw_desc. The idea is that INTC tables should go from using the macro(s) DECLARE_INTC_DESC..() only to using struct intc_desc with name and hw initialized using the macro INTC_HW_DESC(). This move makes it easy to initialize an extended struct intc_desc in the future. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-02sh: intc: Handle legacy IRQ reservation in vector map.Paul Mundt1-0/+3
Different CPUs will have different starting vectors, with varying amounts of reserved or unusable vector space prior to the first slot. This introduces a legacy vector reservation system that inserts itself in between the CPU vector map registration and the platform specific IRQ setup. This works fine in practice as the only new vectors that boards need to establish on their own should be dynamically allocated rather than arbitrarily assigned. As a plus, this also makes all of the converted platforms sparseirq ready. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-27sh: intc: Make ack_regs generally available.Paul Mundt1-4/+0
Currently this is ifdef'ed under SH-3 and SH-4A, but there are other CPUs that will need this as well. Given the size of the existing data structures, this doesn't cause any additional cacheline utilization for the existing users, so has no direct impact on the data structures. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Simplify "multi-evt" interrupt handling.Pawel Moll1-1/+0
This patch changes the way in which "multi-evt" interrups are handled. The intc_evt2irq_table and related intc_evt2irq() have been removed and the "redirecting" handler is installed for the coupled interrupts. Thanks to that the do_IRQ() function don't have to use another level of indirection for all the interrupts... Signed-off-by: Pawel Moll <pawel.moll@st.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27sh: multiple vectors per irq - baseMagnus Damm1-0/+1
Instead of keeping the single vector -> single linux irq mapping we extend the intc code to support merging of vectors to a single linux irq. This helps processors such as sh7750, sh7780 and sh7785 which have more vectors than masking ability. With this patch in place we can modify the intc tables to use one irq per maskable irq source. Please note the following: - If multiple vectors share the same enum then only the first vector will be available as a linux irq. - Drivers may need to be rewritten to get pending irq source from the hardware block instead of irq number. This patch together with the sh7785 specific intc tables solves DMA controller irq issues related to buggy interrupt masking. Reported-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01sh: Move the shared INTC code out to drivers/sh/Paul Mundt1-0/+91
The INTC code will be re-used across different architectures, so move this out to drivers/sh/ and include/linux/sh_intc.h respectively. Signed-off-by: Paul Mundt <lethal@linux-sh.org>