| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It was reported that in moving to 6.1, a larger then 10%
regression was seen in the performance of
clock_gettime(CLOCK_THREAD_CPUTIME_ID,...).
Using a simple reproducer, I found:
5.10:
100000000 calls in 24345994193 ns => 243.460 ns per call
100000000 calls in 24288172050 ns => 242.882 ns per call
100000000 calls in 24289135225 ns => 242.891 ns per call
6.1:
100000000 calls in 28248646742 ns => 282.486 ns per call
100000000 calls in 28227055067 ns => 282.271 ns per call
100000000 calls in 28177471287 ns => 281.775 ns per call
The cause of this was finally narrowed down to the addition of
psi_account_irqtime() in update_rq_clock_task(), in commit
52b1364ba0b1 ("sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ
pressure").
In my initial attempt to resolve this, I leaned towards moving
all accounting work out of the clock_gettime() call path, but it
wasn't very pretty, so it will have to wait for a later deeper
rework. Instead, Peter shared this approach:
Rework psi_account_irqtime() to use its own psi_irq_time base
for accounting, and move it out of the hotpath, calling it
instead from sched_tick() and __schedule().
In testing this, we found the importance of ensuring
psi_account_irqtime() is run under the rq_lock, which Johannes
Weiner helpfully explained, so also add some lockdep annotations
to make that requirement clear.
With this change the performance is back in-line with 5.10:
6.1+fix:
100000000 calls in 24297324597 ns => 242.973 ns per call
100000000 calls in 24318869234 ns => 243.189 ns per call
100000000 calls in 24291564588 ns => 242.916 ns per call
Reported-by: Jimmy Shiu <jimmyshiu@google.com>
Originally-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/r/20240618215909.4099720-1-jstultz@google.com
|
|
During the execution of the following stress test with linux-rt:
stress-ng --cyclic 30 --timeout 30 --minimize --quiet
kmemleak frequently reported a memory leak concerning the task_struct:
unreferenced object 0xffff8881305b8000 (size 16136):
comm "stress-ng", pid 614, jiffies 4294883961 (age 286.412s)
object hex dump (first 32 bytes):
02 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 .@..............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
debug hex dump (first 16 bytes):
53 09 00 00 00 00 00 00 00 00 00 00 00 00 00 00 S...............
backtrace:
[<00000000046b6790>] dup_task_struct+0x30/0x540
[<00000000c5ca0f0b>] copy_process+0x3d9/0x50e0
[<00000000ced59777>] kernel_clone+0xb0/0x770
[<00000000a50befdc>] __do_sys_clone+0xb6/0xf0
[<000000001dbf2008>] do_syscall_64+0x5d/0xf0
[<00000000552900ff>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
The issue occurs in start_dl_timer(), which increments the task_struct
reference count and sets a timer. The timer callback, dl_task_timer,
is supposed to decrement the reference count upon expiration. However,
if enqueue_task_dl() is called before the timer expires and cancels it,
the reference count is not decremented, leading to the leak.
This patch fixes the reference leak by ensuring the task_struct
reference count is properly decremented when the timer is canceled.
Fixes: feff2e65efd8 ("sched/deadline: Unthrottle PI boosted threads while enqueuing")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20240620125618.11419-1-wander@redhat.com
|
|
This reverts commit b0defa7ae03ecf91b8bfd10ede430cff12fcbd06.
b0defa7ae03ec changed the load balancing logic to ignore env.max_loop if
all tasks examined to that point were pinned. The goal of the patch was
to make it more likely to be able to detach a task buried in a long list
of pinned tasks. However, this has the unfortunate side effect of
creating an O(n) iteration in detach_tasks(), as we now must fully
iterate every task on a cpu if all or most are pinned. Since this load
balance code is done with rq lock held, and often in softirq context, it
is very easy to trigger hard lockups. We observed such hard lockups with
a user who affined O(10k) threads to a single cpu.
When I discussed this with Vincent he initially suggested that we keep
the limit on the number of tasks to detach, but increase the number of
tasks we can search. However, after some back and forth on the mailing
list, he recommended we instead revert the original patch, as it seems
likely no one was actually getting hit by the original issue.
Fixes: b0defa7ae03e ("sched/fair: Make sure to try to detach at least one movable task")
Signed-off-by: Josh Don <joshdon@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240620214450.316280-1-joshdon@google.com
|
|
Pull bitmap updates from Yury Norov:
- topology_span_sane() optimization from Kyle Meyer
- fns() rework from Kuan-Wei Chiu (used in cpumask_local_spread() and
other places)
- headers cleanup from Andy
- add a MAINTAINERS record for bitops API
* tag 'bitmap-for-6.10v2' of https://github.com/norov/linux:
usercopy: Don't use "proxy" headers
bitops: Move aligned_byte_mask() to wordpart.h
MAINTAINERS: add BITOPS API record
bitmap: relax find_nth_bit() limitation on return value
lib: make test_bitops compilable into the kernel image
bitops: Optimize fns() for improved performance
lib/test_bitops: Add benchmark test for fns()
Compiler Attributes: Add __always_used macro
sched/topology: Optimize topology_span_sane()
cpumask: Add for_each_cpu_from()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix a sched_balance_newidle setting bug
- Fix bug in the setting of /sys/fs/cgroup/test/cpu.max.burst
- Fix variable-shadowing build warning
- Extend sched-domains debug output
- Fix documentation
- Fix comments
* tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix incorrect initialization of the 'burst' parameter in cpu_max_write()
sched/fair: Remove stale FREQUENCY_UTIL comment
sched/fair: Fix initial util_avg calculation
docs: cgroup-v1: Clarify that domain levels are system-specific
sched/debug: Dump domains' level
sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level
arch/topology: Fix variable naming to avoid shadowing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Remove sentinel elements from ctl_table structs in kernel/*
Removing sentinels in ctl_table arrays reduces the build time size
and runtime memory consumed by ~64 bytes per array. Removals for
net/, io_uring/, mm/, ipc/ and security/ are set to go into mainline
through their respective subsystems making the next release the most
likely place where the final series that removes the check for
proc_name == NULL will land.
This adds to removals already in arch/, drivers/ and fs/.
- Adjust ctl_table definitions and references to allow constification
- Remove unused ctl_table function arguments
- Move non-const elements from ctl_table to ctl_table_header
- Make ctl_table pointers const in ctl_table_root structure
Making the static ctl_table structs const will increase safety by
keeping the pointers to proc_handler functions in .rodata. Though no
ctl_tables where made const in this PR, the ground work for making
that possible has started with these changes sent by Thomas
Weißschuh.
* tag 'sysctl-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: drop now unnecessary out-of-bounds check
sysctl: move sysctl type to ctl_table_header
sysctl: drop sysctl_is_perm_empty_ctl_table
sysctl: treewide: constify argument ctl_table_root::permissions(table)
sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table)
bpf: Remove the now superfluous sentinel elements from ctl_table array
delayacct: Remove the now superfluous sentinel elements from ctl_table array
kprobes: Remove the now superfluous sentinel elements from ctl_table array
printk: Remove the now superfluous sentinel elements from ctl_table array
scheduler: Remove the now superfluous sentinel elements from ctl_table array
seccomp: Remove the now superfluous sentinel elements from ctl_table array
timekeeping: Remove the now superfluous sentinel elements from ctl_table array
ftrace: Remove the now superfluous sentinel elements from ctl_table array
umh: Remove the now superfluous sentinel elements from ctl_table array
kernel misc: Remove the now superfluous sentinel elements from ctl_table array
|
|
cpu_max_write()
In the cgroup v2 CPU subsystem, assuming we have a
cgroup named 'test', and we set cpu.max and cpu.max.burst:
# echo 1000000 > /sys/fs/cgroup/test/cpu.max
# echo 1000000 > /sys/fs/cgroup/test/cpu.max.burst
then we check cpu.max and cpu.max.burst:
# cat /sys/fs/cgroup/test/cpu.max
1000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000000
Next we set cpu.max again and check cpu.max and
cpu.max.burst:
# echo 2000000 > /sys/fs/cgroup/test/cpu.max
# cat /sys/fs/cgroup/test/cpu.max
2000000 100000
# cat /sys/fs/cgroup/test/cpu.max.burst
1000
... we find that the cpu.max.burst value changed unexpectedly.
In cpu_max_write(), the unit of the burst value returned
by tg_get_cfs_burst() is microseconds, while in cpu_max_write(),
the burst unit used for calculation should be nanoseconds,
which leads to the bug.
To fix it, get the burst value directly from tg->cfs_bandwidth.burst.
Fixes: f4183717b370 ("sched/fair: Introduce the burstable CFS controller")
Reported-by: Qixin Liao <liaoqixin@huawei.com>
Signed-off-by: Cheng Yu <serein.chengyu@huawei.com>
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240424132438.514720-1-serein.chengyu@huawei.com
|
|
On 05/03/2024 15:05, Vincent Guittot wrote:
I'm fine with either and that was my first thought here, too, but it did seem like
the comment was mostly placed there to justify the 'unexpected' high utilization
when explicitly passing FREQUENCY_UTIL and the need to clamp it then.
So removing did feel slightly more natural to me anyway.
So alternatively:
From: Christian Loehle <christian.loehle@arm.com>
Date: Tue, 5 Mar 2024 09:34:41 +0000
Subject: [PATCH] sched/fair: Remove stale FREQUENCY_UTIL mention
effective_cpu_util() flags were removed, so remove mentioning of the
flag.
commit 9c0b4bb7f6303 ("sched/cpufreq: Rework schedutil governor performance estimation")
reworked effective_cpu_util() removing enum cpu_util_type. Modify the
comment accordingly.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/0e2833ee-0939-44e0-82a2-520a585a0153@arm.com
|
|
Change se->load.weight to se_weight(se) in the calculation for the
initial util_avg to avoid unnecessarily inflating the util_avg by 1024
times.
The reason is that se->load.weight has the unit/scale as the scaled-up
load, while cfs_rg->avg.load_avg has the unit/scale as the true task
weight (as mapped directly from the task's nice/priority value). With
CONFIG_32BIT, the scaled-up load is equal to the true task weight. With
CONFIG_64BIT, the scaled-up load is 1024 times the true task weight.
Thus, the current code may inflate the util_avg by 1024 times. The
follow-up capping will not allow the util_avg value to go wild. But the
calculation should have the correct logic.
Signed-off-by: Dawei Li <daweilics@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Vishal Chourasia <vishalc@linux.ibm.com>
Link: https://lore.kernel.org/r/20240315015916.21545-1-daweilics@gmail.com
|
|
Knowing domain's level exactly can be useful when setting
relax_domain_level or cpuset.sched_relax_domain_level
Usage:
cat /debug/sched/domains/cpu0/domain1/level
to dump cpu0 domain1's level.
SDM macro is not used because sd->level is 'int' and
it would hide the type mismatch between 'int' and 'u32'.
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/9489b6475f6dd6fbc67c617752d4216fa094da53.1714488502.git.vitaly@bursov.com
|
|
Change relax_domain_level checks so that it would be possible
to include or exclude all domains from newidle balancing.
This matches the behavior described in the documentation:
-1 no request. use system default or follow request of others.
0 no search.
1 search siblings (hyperthreads in a core).
"2" enables levels 0 and 1, level_max excludes the last (level_max)
level, and level_max+1 includes all levels.
Fixes: 1d3504fcf560 ("sched, cpuset: customize sched domains, core")
Signed-off-by: Vitalii Bursov <vitaly@bursov.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Link: https://lore.kernel.org/r/bd6de28e80073c79466ec6401cdeae78f0d4423d.1714488502.git.vitaly@bursov.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
|
|
Optimize topology_span_sane() by removing duplicate comparisons.
Since topology_span_sane() is called inside of for_each_cpu(), each
previous CPU has already been compared against every other CPU. The
current CPU only needs to be compared against higher-numbered CPUs.
The total number of comparisons is reduced from N * (N - 1) to
N * (N - 1) / 2 on each non-NUMA scheduling domain level.
Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
|
|
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
|
|
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53cd ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
|
|
The optional shift of the clock used by thermal/hw load avg has been
introduced to handle case where the signal was not always a high frequency
hw signal. Now that cpufreq provides a signal for firmware and
SW pressure, we can remove this exception and always keep this PELT signal
aligned with other signals.
Mark sysctl_sched_migration_cost boot parameter as deprecated
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20240326091616.3696851-6-vincent.guittot@linaro.org
|
|
arch_update_hw_pressure()
Now that cpufreq provides a pressure value to the scheduler, rename
arch_update_thermal_pressure into HW pressure to reflect that it returns
a pressure applied by HW (i.e. with a high frequency change) and not
always related to thermal mitigation but also generated by max current
limitation as an example. Such high frequency signal needs filtering to be
smoothed and provide an value that reflects the average available capacity
into the scheduler time scale.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20240326091616.3696851-5-vincent.guittot@linaro.org
|
|
Aggregate the different pressures applied on the capacity of CPUs and
create a new function that returns the actual capacity of the CPU:
get_actual_cpu_capacity().
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Link: https://lore.kernel.org/r/20240326091616.3696851-3-vincent.guittot@linaro.org
|
|
sg_overloaded is used instead of sg_overutilized to update
rd->sg_overutilized.
Fixes: 4475cd8bfd9b ("sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240404155738.2866102-1-vincent.guittot@linaro.org
|
|
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
rm sentinel element from ctl_table arrays
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
It was possible to have pick_eevdf() return NULL, which then causes a
NULL-deref. This turned out to be due to entity_eligible() returning
falsely negative because of a s64 multiplcation overflow.
Specifically, reweight_eevdf() computes the vlag without considering
the limit placed upon vlag as update_entity_lag() does, and then the
scaling multiplication (remember that weight is 20bit fixed point) can
overflow. This then leads to the new vruntime being weird which then
causes the above entity_eligible() to go side-ways and claim nothing
is eligible.
Thus limit the range of vlag accordingly.
All this was quite rare, but fatal when it does happen.
Closes: https://lore.kernel.org/all/ZhuYyrh3mweP_Kd8@nz.home/
Closes: https://lore.kernel.org/all/CA+9S74ih+45M_2TPUY_mPPVDhNvyYfy1J1ftSix+KjiTVxg8nw@mail.gmail.com/
Closes: https://lore.kernel.org/lkml/202401301012.2ed95df0-oliver.sang@intel.com/
Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight")
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Reported-by: Igor Raits <igor@gooddata.com>
Reported-by: Breno Leitao <leitao@debian.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-and-tested-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240422082238.5784-1-xuewen.yan@unisoc.com
|
|
reweight_eevdf() only keeps V unchanged inside itself. When se !=
cfs_rq->curr, it would be dequeued from rb tree first. So that V is
changed and the result is wrong. Pass the original V to reweight_eevdf()
to fix this issue.
Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
[peterz: flip if() condition for clarity]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Link: https://lkml.kernel.org/r/20240306022133.81008-3-dtcccc@linux.alibaba.com
|
|
reweight_eevdf() needs the latest V to do accurate calculation for new
ve and vd. So update V unconditionally when se is runnable.
Fixes: eab03c23c2a1 ("sched/eevdf: Fix vruntime adjustment on reweight")
Suggested-by: Abel Wu <wuyun.abel@bytedance.com>
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Abel Wu <wuyun.abel@bytedance.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Chen Yu <yu.c.chen@intel.com>
Link: https://lore.kernel.org/r/20240306022133.81008-2-dtcccc@linux.alibaba.com
|
|
The generic vtime_task_switch() implementation gets built only
if __ARCH_HAS_VTIME_TASK_SWITCH is not defined, but requires an
architecture to implement arch_vtime_task_switch() callback at
the same time, which is confusing.
Further, arch_vtime_task_switch() is implemented for 32-bit PowerPC
architecture only and vtime_task_switch() generic variant is rather
superfluous.
Simplify the whole vtime_task_switch() wiring by moving the existing
generic implementation to PowerPC.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2cb6e3caada93623f6d4f78ad938ac6cd0e2fda8.1712760275.git.agordeev@linux.ibm.com
|
|
Many architectures' switch_mm() (e.g. arm64) do not have an smp_mb()
which the core scheduler code has depended upon since commit:
commit 223baf9d17f25 ("sched: Fix performance regression introduced by mm_cid")
If switch_mm() doesn't call smp_mb(), sched_mm_cid_remote_clear() can
unset the actively used cid when it fails to observe active task after it
sets lazy_put.
There *is* a memory barrier between storing to rq->curr and _return to
userspace_ (as required by membarrier), but the rseq mm_cid has stricter
requirements: the barrier needs to be issued between store to rq->curr
and switch_mm_cid(), which happens earlier than:
- spin_unlock(),
- switch_to().
So it's fine when the architecture switch_mm() happens to have that
barrier already, but less so when the architecture only provides the
full barrier in switch_to() or spin_unlock().
It is a bug in the rseq switch_mm_cid() implementation. All architectures
that don't have memory barriers in switch_mm(), but rather have the full
barrier either in finish_lock_switch() or switch_to() have them too late
for the needs of switch_mm_cid().
Introduce a new smp_mb__after_switch_mm(), defined as smp_mb() in the
generic barrier.h header, and use it in switch_mm_cid() for scheduler
transitions where switch_mm() is expected to provide a memory barrier.
Architectures can override smp_mb__after_switch_mm() if their
switch_mm() implementation provides an implicit memory barrier.
Override it with a no-op on x86 which implicitly provide this memory
barrier by writing to CR3.
Fixes: 223baf9d17f2 ("sched: Fix performance regression introduced by mm_cid")
Reported-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> # for arm64
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: <stable@vger.kernel.org> # 6.4.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240415152114.59122-2-mathieu.desnoyers@efficios.com
|
|
->overloaded and ->overutilized flags
SG_OVERLOADED and SG_OVERUTILIZED flags plus the sg_status bitmask are an
unnecessary complication that only make the code harder to read and slower.
We only ever set them separately:
thule:~/tip> git grep SG_OVER kernel/sched/
kernel/sched/fair.c: set_rd_overutilized_status(rq->rd, SG_OVERUTILIZED);
kernel/sched/fair.c: *sg_status |= SG_OVERLOADED;
kernel/sched/fair.c: *sg_status |= SG_OVERUTILIZED;
kernel/sched/fair.c: *sg_status |= SG_OVERLOADED;
kernel/sched/fair.c: set_rd_overloaded(env->dst_rq->rd, sg_status & SG_OVERLOADED);
kernel/sched/fair.c: sg_status & SG_OVERUTILIZED);
kernel/sched/fair.c: } else if (sg_status & SG_OVERUTILIZED) {
kernel/sched/fair.c: set_rd_overutilized_status(env->dst_rq->rd, SG_OVERUTILIZED);
kernel/sched/sched.h:#define SG_OVERLOADED 0x1 /* More than one runnable task on a CPU. */
kernel/sched/sched.h:#define SG_OVERUTILIZED 0x2 /* One or more CPUs are over-utilized. */
kernel/sched/sched.h: set_rd_overloaded(rq->rd, SG_OVERLOADED);
And use them separately, which results in suboptimal code:
/* update overload indicator if we are at root domain */
set_rd_overloaded(env->dst_rq->rd, sg_status & SG_OVERLOADED);
/* Update over-utilization (tipping point, U >= 0) indicator */
set_rd_overutilized_status(env->dst_rq->rd,
Introduce separate sg_overloaded and sg_overutilized flags in update_sd_lb_stats()
and its lower level functions, and change all of them to 'bool'.
Remove the now unused SG_OVERLOADED and SG_OVERUTILIZED flags.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZgVPhODZ8/nbsqbP@gmail.com
|
|
The _status() postfix has no real meaning, simplify the naming
and harmonize it with set_rd_overloaded().
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZgVHq65XKsOZpfgK@gmail.com
|
|
Follow the rename of the root_domain::overloaded flag.
Note that this also matches the SG_OVERUTILIZED flag better.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZgVHq65XKsOZpfgK@gmail.com
|
|
Follow the rename of the root_domain::overloaded flag.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZgVHq65XKsOZpfgK@gmail.com
|
|
It is silly to use an ambiguous noun instead of a clear adjective when naming
such a flag ...
Note how root_domain::overutilized already used a proper adjective.
rd->overloaded is now set to 1 when the root domain is overloaded.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Qais Yousef <qyousef@layalina.io>
Cc: Shrikanth Hegde <sshegde@linux.ibm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZgVHq65XKsOZpfgK@gmail.com
|
|
Introduce two helper functions to access & set the root_domain::overload flag:
get_rd_overload()
set_rd_overload()
To make sure code is always following READ_ONCE()/WRITE_ONCE() access methods.
No change in functionality intended.
[ mingo: Renamed the accessors to get_/set_rd_overload(), tidied up the changelog. ]
Suggested-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240325054505.201995-3-sshegde@linux.ibm.com
|
|
The root_domain::overload flag is 1 when there's any rq
in the root domain that has 2 or more running tasks. (Ie. it's overloaded.)
The root_domain structure itself is a global structure per cpuset island.
The ::overload flag is maintained the following way:
- Set when adding a second task to the runqueue.
- It is cleared in update_sd_lb_stats() during load balance,
if none of the rqs have 2 or more running tasks.
This flag is used during newidle balance to see if its worth doing a full
load balance pass, which can be an expensive operation. If it is set,
then newidle balance will try to aggressively pull a task.
Since commit:
630246a06ae2 ("sched/fair: Clean-up update_sg_lb_stats parameters")
::overload is being written unconditionally, even if it has the same
value. The change in value of this depends on the workload, but on
typical workloads, it doesn't change all that often: a system is
either dominantly overloaded for substantial amounts of time, or not.
Extra writes to this semi-global structure cause unnecessary overhead, extra
bus traffic, etc. - so avoid it as much as possible.
Perf probe stats show that it's worth making this change (numbers are
with patch applied):
1M probe:sched_balance_newidle_L38
139 probe:update_sd_lb_stats_L53 <====== 1->0 writes
129K probe:add_nr_running_L12
74 probe:add_nr_running_L13 <====== 0->1 writes
54K probe:update_sd_lb_stats_L50 <====== reads
These numbers prove that actual change in the ::overload value is (much) less
frequent: L50 is much larger at ~54,000 accesses vs L53+L13 of 139+74.
[ mingo: Rewrote the changelog. ]
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/20240325054505.201995-2-sshegde@linux.ibm.com
|
|
Access to root_domainoverutilized is always used with sched_energy_enabled in
the pattern:
if (sched_energy_enabled && !overutilized)
do something
So modify the helper function to utilize this pattern. This is more
readable code as it would say, do something when root domain is not
overutilized. This function always return true when EAS is disabled.
No change in functionality intended.
Suggested-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240326152616.380999-1-sshegde@linux.ibm.com
|
|
newidle(CPU_NEWLY_IDLE) balancing doesn't stop the load-balancing if the
continue_balancing flag is reset, but the other two balancing (IDLE, BUSY)
cases do that.
newidle balance stops the load balancing if rq has a task or there
is wakeup pending. The same checks are present in should_we_balance for
newidle. Hence use the return value and simplify continue_balancing
mechanism for newidle. Update the comment surrounding it as well.
No change in functionality intended.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Link: https://lore.kernel.org/r/20240325153926.274284-1-sshegde@linux.ibm.com
|
|
root_domain::overutilized
The root_domain::overutilized field is READ_ONCE() accessed in
multiple places, which could be simplified with a helper function.
This might also make it more apparent that it needs to be used
only in case of EAS.
No change in functionality intended.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240307085725.444486-3-sshegde@linux.ibm.com
|
|
root_domain::overutilized is only used for EAS(energy aware scheduler)
to decide whether to do load balance or not. It is not used if EAS
not possible.
Currently enqueue_task_fair and task_tick_fair accesses, sometime updates
this field. In update_sd_lb_stats it is updated often. This causes cache
contention due to true sharing and burns a lot of cycles. ::overload and
::overutilized are part of the same cacheline. Updating it often invalidates
the cacheline. That causes access to ::overload to slow down due to
false sharing. Hence add EAS check before accessing/updating this field.
EAS check is optimized at compile time or it is a static branch.
Hence it shouldn't cost much.
With the patch, both enqueue_task_fair and newidle_balance don't show
up as hot routines in perf profile.
6.8-rc4:
7.18% swapper [kernel.vmlinux] [k] enqueue_task_fair
6.78% s [kernel.vmlinux] [k] newidle_balance
+patch:
0.14% swapper [kernel.vmlinux] [k] enqueue_task_fair
0.00% swapper [kernel.vmlinux] [k] newidle_balance
While at it: trace_sched_overutilized_tp expect that second argument to
be bool. So do a int to bool conversion for that.
Fixes: 2802bf3cd936 ("sched/fair: Add over-utilization/tipping point indicator")
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240307085725.444486-2-sshegde@linux.ibm.com
|
|
It is not necessarily an indication of the system being busy and
requires a backoff of the load balancer activities. But pushing it high
could mean generally delaying other misfit activities or other type of
imbalances.
Also don't pollute nr_balance_failed because of misfit failures. The
value is used for enabling cache hot migration and in migrate_util/load
types. None of which should be impacted (skewed) by misfit failures.
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240324004552.999936-5-qyousef@layalina.io
|
|
The value is no longer used as we now keep track of max_allowed_capacity
for each task instead.
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240324004552.999936-4-qyousef@layalina.io
|
|
If a misfit task is affined to a subset of the possible CPUs, we need to
verify that one of these CPUs can fit it. Otherwise the load balancer
code will continuously trigger needlessly leading the balance_interval
to increase in return and eventually end up with a situation where real
imbalances take a long time to address because of this impossible
imbalance situation.
This can happen in Android world where it's common for background tasks
to be restricted to little cores.
Similarly if we can't fit the biggest core, triggering misfit is
pointless as it is the best we can ever get on this system.
To be able to detect that; we use asym_cap_list to iterate through
capacities in the system to see if the task is able to run at a higher
capacity level based on its p->cpus_ptr. We do that when the affinity
change, a fair task is forked, or when a task switched to fair policy.
We store the max_allowed_capacity in task_struct to allow for cheap
comparison in the fast path.
Improve check_misfit_status() function by removing redundant checks.
misfit_task_load will be 0 if the task can't move to a bigger CPU. And
nohz_balancer_kick() already checks for cpu_check_capacity() before
calling check_misfit_status().
Test:
=====
Add
trace_printk("balance_interval = %lu\n", interval)
in get_sd_balance_interval().
run
if [ "$MASK" != "0" ]; then
adb shell "taskset -a $MASK cat /dev/zero > /dev/null"
fi
sleep 10
// parse ftrace buffer counting the occurrence of each valaue
Where MASK is either:
* 0: no busy task running
* 1: busy task is pinned to 1 cpu; handled today to not cause
misfit
* f: busy task pinned to little cores, simulates busy background
task, demonstrates the problem to be fixed
Results:
========
Note how occurrence of balance_interval = 128 overshoots for MASK = f.
BEFORE
------
MASK=0
1 balance_interval = 175
120 balance_interval = 128
846 balance_interval = 64
55 balance_interval = 63
215 balance_interval = 32
2 balance_interval = 31
2 balance_interval = 16
4 balance_interval = 8
1870 balance_interval = 4
65 balance_interval = 2
MASK=1
27 balance_interval = 175
37 balance_interval = 127
840 balance_interval = 64
167 balance_interval = 63
449 balance_interval = 32
84 balance_interval = 31
304 balance_interval = 16
1156 balance_interval = 8
2781 balance_interval = 4
428 balance_interval = 2
MASK=f
1 balance_interval = 175
1328 balance_interval = 128
44 balance_interval = 64
101 balance_interval = 63
25 balance_interval = 32
5 balance_interval = 31
23 balance_interval = 16
23 balance_interval = 8
4306 balance_interval = 4
177 balance_interval = 2
AFTER
-----
Note how the high values almost disappear for all MASK values. The
system has background tasks that could trigger the problem without
simulate it even with MASK=0.
MASK=0
103 balance_interval = 63
19 balance_interval = 31
194 balance_interval = 8
4827 balance_interval = 4
179 balance_interval = 2
MASK=1
131 balance_interval = 63
1 balance_interval = 31
87 balance_interval = 8
3600 balance_interval = 4
7 balance_interval = 2
MASK=f
8 balance_interval = 127
182 balance_interval = 63
3 balance_interval = 31
9 balance_interval = 16
415 balance_interval = 8
3415 balance_interval = 4
21 balance_interval = 2
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240324004552.999936-3-qyousef@layalina.io
|
|
So that we can use it to iterate through available capacities in the
system. Sort asym_cap_list in descending order as expected users are
likely to be interested on the highest capacity first.
Make the list RCU protected to allow for cheap access in hot paths.
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240324004552.999936-2-qyousef@layalina.io
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
from hotplugged memory rather than only from main memory. Series
"implement "memmap on memory" feature on s390".
- More folio conversions from Matthew Wilcox in the series
"Convert memcontrol charge moving to use folios"
"mm: convert mm counter to take a folio"
- Chengming Zhou has optimized zswap's rbtree locking, providing
significant reductions in system time and modest but measurable
reductions in overall runtimes. The series is "mm/zswap: optimize the
scalability of zswap rb-tree".
- Chengming Zhou has also provided the series "mm/zswap: optimize zswap
lru list" which provides measurable runtime benefits in some
swap-intensive situations.
- And Chengming Zhou further optimizes zswap in the series "mm/zswap:
optimize for dynamic zswap_pools". Measured improvements are modest.
- zswap cleanups and simplifications from Yosry Ahmed in the series
"mm: zswap: simplify zswap_swapoff()".
- In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
contributed several DAX cleanups as well as adding a sysfs tunable to
control the memmap_on_memory setting when the dax device is
hotplugged as system memory.
- Johannes Weiner has added the large series "mm: zswap: cleanups",
which does that.
- More DAMON work from SeongJae Park in the series
"mm/damon: make DAMON debugfs interface deprecation unignorable"
"selftests/damon: add more tests for core functionalities and corner cases"
"Docs/mm/damon: misc readability improvements"
"mm/damon: let DAMOS feeds and tame/auto-tune itself"
- In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
extension" Rakie Kim has developed a new mempolicy interleaving
policy wherein we allocate memory across nodes in a weighted fashion
rather than uniformly. This is beneficial in heterogeneous memory
environments appearing with CXL.
- Christophe Leroy has contributed some cleanup and consolidation work
against the ARM pagetable dumping code in the series "mm: ptdump:
Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".
- Luis Chamberlain has added some additional xarray selftesting in the
series "test_xarray: advanced API multi-index tests".
- Muhammad Usama Anjum has reworked the selftest code to make its
human-readable output conform to the TAP ("Test Anything Protocol")
format. Amongst other things, this opens up the use of third-party
tools to parse and process out selftesting results.
- Ryan Roberts has added fork()-time PTE batching of THP ptes in the
series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
targeted at arm64, this significantly speeds up fork() when the
process has a large number of pte-mapped folios.
- David Hildenbrand also gets in on the THP pte batching game in his
series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
implements batching during munmap() and other pte teardown
situations. The microbenchmark improvements are nice.
- And in the series "Transparent Contiguous PTEs for User Mappings"
Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
mappings"). Kernel build times on arm64 improved nicely. Ryan's
series "Address some contpte nits" provides some followup work.
- In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
fixed an obscure hugetlb race which was causing unnecessary page
faults. He has also added a reproducer under the selftest code.
- In the series "selftests/mm: Output cleanups for the compaction
test", Mark Brown did what the title claims.
- Kinsey Ho has added the series "mm/mglru: code cleanup and
refactoring".
- Even more zswap material from Nhat Pham. The series "fix and extend
zswap kselftests" does as claimed.
- In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
in our handling of DAX on archiecctures which have virtually aliasing
data caches. The arm architecture is the main beneficiary.
- Lokesh Gidra's series "per-vma locks in userfaultfd" provides
dramatic improvements in worst-case mmap_lock hold times during
certain userfaultfd operations.
- Some page_owner enhancements and maintenance work from Oscar Salvador
in his series
"page_owner: print stacks and their outstanding allocations"
"page_owner: Fixup and cleanup"
- Uladzislau Rezki has contributed some vmalloc scalability
improvements in his series "Mitigate a vmap lock contention". It
realizes a 12x improvement for a certain microbenchmark.
- Some kexec/crash cleanup work from Baoquan He in the series "Split
crash out from kexec and clean up related config items".
- Some zsmalloc maintenance work from Chengming Zhou in the series
"mm/zsmalloc: fix and optimize objects/page migration"
"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"
- Zi Yan has taught the MM to perform compaction on folios larger than
order=0. This a step along the path to implementaton of the merging
of large anonymous folios. The series is named "Enable >0 order folio
memory compaction".
- Christoph Hellwig has done quite a lot of cleanup work in the
pagecache writeback code in his series "convert write_cache_pages()
to an iterator".
- Some modest hugetlb cleanups and speedups in Vishal Moola's series
"Handle hugetlb faults under the VMA lock".
- Zi Yan has changed the page splitting code so we can split huge pages
into sizes other than order-0 to better utilize large folios. The
series is named "Split a folio to any lower order folios".
- David Hildenbrand has contributed the series "mm: remove
total_mapcount()", a cleanup.
- Matthew Wilcox has sought to improve the performance of bulk memory
freeing in his series "Rearrange batched folio freeing".
- Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
provides large improvements in bootup times on large machines which
are configured to use large numbers of hugetlb pages.
- Matthew Wilcox's series "PageFlags cleanups" does that.
- Qi Zheng's series "minor fixes and supplement for ptdesc" does that
also. S390 is affected.
- Cleanups to our pagemap utility functions from Peter Xu in his series
"mm/treewide: Replace pXd_large() with pXd_leaf()".
- Nico Pache has fixed a few things with our hugepage selftests in his
series "selftests/mm: Improve Hugepage Test Handling in MM
Selftests".
- Also, of course, many singleton patches to many things. Please see
the individual changelogs for details.
* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
mm/zswap: remove the memcpy if acomp is not sleepable
crypto: introduce: acomp_is_async to expose if comp drivers might sleep
memtest: use {READ,WRITE}_ONCE in memory scanning
mm: prohibit the last subpage from reusing the entire large folio
mm: recover pud_leaf() definitions in nopmd case
selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
selftests/mm: skip uffd hugetlb tests with insufficient hugepages
selftests/mm: dont fail testsuite due to a lack of hugepages
mm/huge_memory: skip invalid debugfs new_order input for folio split
mm/huge_memory: check new folio order when split a folio
mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
mm: fix list corruption in put_pages_list
mm: remove folio from deferred split list before uncharging it
filemap: avoid unnecessary major faults in filemap_fault()
mm,page_owner: drop unnecessary check
mm,page_owner: check for null stack_record before bumping its refcount
mm: swap: fix race between free_swap_and_cache() and swapoff()
mm/treewide: align up pXd_leaf() retval across archs
mm/treewide: drop pXd_large()
...
|
|
So I made all speling mistakes / typos red in my editor. Big mistake...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
|
|
The 'idle_balance()' function hasn't existed for years, and there's no
load_balance_newidle() either - both are sched_balance_newidle() today.
Reported-by: Honglei Wang <jameshongleiwang@126.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/ZfAwNufbiyt/5biu@gmail.com
|
|
Standardize scheduler load-balancing function names on the
sched_balance_() prefix.
Also use 'dst' instead of 'idlest', because it's not really
true that we return the 'idlest' group or CPU, we sort by
idle-exit latency and only return the idlest CPUs from the
lowest-latency set of CPUs.
The true 'idlest' CPUs often remain idle for a long time
and are never returned as long as the system is under-loaded.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20240308111819.1101550-14-mingo@kernel.org
|
|
Standardize scheduler load-balancing function names on the
sched_balance_() prefix.
Also use 'dst' instead of 'idlest', because it's not really
true that we return the 'idlest' group or CPU, we sort by
idle-exit latency and only return the idlest CPUs from the
lowest-latency set of CPUs.
The true 'idlest' CPUs often remain idle for a long time
and are never returned as long as the system is under-loaded.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20240308111819.1101550-13-mingo@kernel.org
|
|
sched_balance_find_dst_group_cpu()
Standardize scheduler load-balancing function names on the
sched_balance_() prefix.
Also use 'dst' instead of 'idlest': while historically correct,
today it's not really true anymore that we return the 'idlest'
group or CPU, we sort by idle-exit latency and only return the
idlest CPUs from the lowest-latency set of CPUs.
The true 'idlest' CPUs often remain idle for a long time
and are never returned as long as the system is under-loaded.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20240308111819.1101550-12-mingo@kernel.org
|
|
Standardize scheduler load-balancing function names on the
sched_balance_() prefix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20240308111819.1101550-11-mingo@kernel.org
|
|
sched_balance_update_blocked_averages()
Standardize scheduler load-balancing function names on the
sched_balance_() prefix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://lore.kernel.org/r/20240308111819.1101550-10-mingo@kernel.org
|
