summaryrefslogtreecommitdiff
path: root/mm/kasan/common.c
AgeCommit message (Collapse)AuthorFilesLines
2024-06-25kasan: fix bad call to unpoison_slab_objectAndrey Konovalov1-1/+1
Commit 29d7355a9d05 ("kasan: save alloc stack traces for mempool") messed up one of the calls to unpoison_slab_object: the last two arguments are supposed to be GFP flags and whether to init the object memory. Fix the call. Without this fix, __kasan_mempool_unpoison_object provides the object's size as GFP flags to unpoison_slab_object, which can cause LOCKDEP reports (and probably other issues). Link: https://lkml.kernel.org/r/20240614143238.60323-1-andrey.konovalov@linux.dev Fixes: 29d7355a9d05 ("kasan: save alloc stack traces for mempool") Signed-off-by: Andrey Konovalov <andreyknvl@gmail.com> Reported-by: Brad Spengler <spender@grsecurity.net> Acked-by: Marco Elver <elver@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-24merge mm-hotfixes-stable into mm-nonmm-stable to pick up stackdepot changesAndrew Morton1-5/+3
2024-02-24kasan: revert eviction of stack traces in generic modeMarco Elver1-5/+3
This partially reverts commits cc478e0b6bdf, 63b85ac56a64, 08d7c94d9635, a414d4286f34, and 773688a6cb24 to make use of variable-sized stack depot records, since eviction of stack entries from stack depot forces fixed- sized stack records. Care was taken to retain the code cleanups by the above commits. Eviction was added to generic KASAN as a response to alleviating the additional memory usage from fixed-sized stack records, but this still uses more memory than previously. With the re-introduction of variable-sized records for stack depot, we can just switch back to non-evictable stack records again, and return back to the previous performance and memory usage baseline. Before (observed after a KASAN kernel boot): pools: 597 refcounted_allocations: 17547 refcounted_frees: 6477 refcounted_in_use: 11070 freelist_size: 3497 persistent_count: 12163 persistent_bytes: 1717008 After: pools: 319 refcounted_allocations: 0 refcounted_frees: 0 refcounted_in_use: 0 freelist_size: 0 persistent_count: 29397 persistent_bytes: 5183536 As can be seen from the counters, with a generic KASAN config, refcounted allocations and evictions are no longer used. Due to using variable-sized records, I observe a reduction of 278 stack depot pools (saving 4448 KiB) with my test setup. Link: https://lkml.kernel.org/r/20240129100708.39460-2-elver@google.com Fixes: cc478e0b6bdf ("kasan: avoid resetting aux_lock") Fixes: 63b85ac56a64 ("kasan: stop leaking stack trace handles") Fixes: 08d7c94d9635 ("kasan: memset free track in qlink_free") Fixes: a414d4286f34 ("kasan: handle concurrent kasan_record_aux_stack calls") Fixes: 773688a6cb24 ("kasan: use stack_depot_put for Generic mode") Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-02-23kasan: increase the number of bits to shift when recording extra timestampsJuntong Deng1-1/+1
In 5d4c6ac94694 ("kasan: record and report more information") I thought that printk only displays a maximum of 99999 seconds, but actually printk can display a larger number of seconds. So increase the number of bits to shift when recording the extra timestamp (44 bits), without affecting the precision, shift it right by 9 bits, discarding all bits that do not affect the microsecond part (nanoseconds will not be shown). Currently the maximum time that can be displayed is 9007199.254740s, because 11111111111111111111111111111111111111111111 (44 bits) << 9 = 11111111111111111111111111111111111111111111000000000 = 9007199.254740 Link: https://lkml.kernel.org/r/AM6PR03MB58481629F2F28CE007412139994D2@AM6PR03MB5848.eurprd03.prod.outlook.com Fixes: 5d4c6ac94694 ("kasan: record and report more information") Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Acked-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-09Merge tag 'mm-stable-2024-01-08-15-31' of ↵Linus Torvalds1-86/+194
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Many singleton patches against the MM code. The patch series which are included in this merge do the following: - Peng Zhang has done some mapletree maintainance work in the series 'maple_tree: add mt_free_one() and mt_attr() helpers' 'Some cleanups of maple tree' - In the series 'mm: use memmap_on_memory semantics for dax/kmem' Vishal Verma has altered the interworking between memory-hotplug and dax/kmem so that newly added 'device memory' can more easily have its memmap placed within that newly added memory. - Matthew Wilcox continues folio-related work (including a few fixes) in the patch series 'Add folio_zero_tail() and folio_fill_tail()' 'Make folio_start_writeback return void' 'Fix fault handler's handling of poisoned tail pages' 'Convert aops->error_remove_page to ->error_remove_folio' 'Finish two folio conversions' 'More swap folio conversions' - Kefeng Wang has also contributed folio-related work in the series 'mm: cleanup and use more folio in page fault' - Jim Cromie has improved the kmemleak reporting output in the series 'tweak kmemleak report format'. - In the series 'stackdepot: allow evicting stack traces' Andrey Konovalov to permits clients (in this case KASAN) to cause eviction of no longer needed stack traces. - Charan Teja Kalla has fixed some accounting issues in the page allocator's atomic reserve calculations in the series 'mm: page_alloc: fixes for high atomic reserve caluculations'. - Dmitry Rokosov has added to the samples/ dorectory some sample code for a userspace memcg event listener application. See the series 'samples: introduce cgroup events listeners'. - Some mapletree maintanance work from Liam Howlett in the series 'maple_tree: iterator state changes'. - Nhat Pham has improved zswap's approach to writeback in the series 'workload-specific and memory pressure-driven zswap writeback'. - DAMON/DAMOS feature and maintenance work from SeongJae Park in the series 'mm/damon: let users feed and tame/auto-tune DAMOS' 'selftests/damon: add Python-written DAMON functionality tests' 'mm/damon: misc updates for 6.8' - Yosry Ahmed has improved memcg's stats flushing in the series 'mm: memcg: subtree stats flushing and thresholds'. - In the series 'Multi-size THP for anonymous memory' Ryan Roberts has added a runtime opt-in feature to transparent hugepages which improves performance by allocating larger chunks of memory during anonymous page faults. - Matthew Wilcox has also contributed some cleanup and maintenance work against eh buffer_head code int he series 'More buffer_head cleanups'. - Suren Baghdasaryan has done work on Andrea Arcangeli's series 'userfaultfd move option'. UFFDIO_MOVE permits userspace heap compaction algorithms to move userspace's pages around rather than UFFDIO_COPY'a alloc/copy/free. - Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm: Add ksm advisor'. This is a governor which tunes KSM's scanning aggressiveness in response to userspace's current needs. - Chengming Zhou has optimized zswap's temporary working memory use in the series 'mm/zswap: dstmem reuse optimizations and cleanups'. - Matthew Wilcox has performed some maintenance work on the writeback code, both code and within filesystems. The series is 'Clean up the writeback paths'. - Andrey Konovalov has optimized KASAN's handling of alloc and free stack traces for secondary-level allocators, in the series 'kasan: save mempool stack traces'. - Andrey also performed some KASAN maintenance work in the series 'kasan: assorted clean-ups'. - David Hildenbrand has gone to town on the rmap code. Cleanups, more pte batching, folio conversions and more. See the series 'mm/rmap: interface overhaul'. - Kinsey Ho has contributed some maintenance work on the MGLRU code in the series 'mm/mglru: Kconfig cleanup'. - Matthew Wilcox has contributed lruvec page accounting code cleanups in the series 'Remove some lruvec page accounting functions'" * tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits) mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER mm, treewide: introduce NR_PAGE_ORDERS selftests/mm: add separate UFFDIO_MOVE test for PMD splitting selftests/mm: skip test if application doesn't has root privileges selftests/mm: conform test to TAP format output selftests: mm: hugepage-mmap: conform to TAP format output selftests/mm: gup_test: conform test to TAP format output mm/selftests: hugepage-mremap: conform test to TAP format output mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large mm/memcontrol: remove __mod_lruvec_page_state() mm/khugepaged: use a folio more in collapse_file() slub: use a folio in __kmalloc_large_node slub: use folio APIs in free_large_kmalloc() slub: use alloc_pages_node() in alloc_slab_page() mm: remove inc/dec lruvec page state functions mm: ratelimit stat flush from workingset shrinker kasan: stop leaking stack trace handles mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE mm/mglru: add dummy pmd_dirty() ...
2024-01-05kasan: stop leaking stack trace handlesAndrey Konovalov1-4/+23
Commit 773688a6cb24 ("kasan: use stack_depot_put for Generic mode") added support for stack trace eviction for Generic KASAN. However, that commit didn't evict stack traces when the object is not put into quarantine. As a result, some stack traces are never evicted from the stack depot. In addition, with the "kasan: save mempool stack traces" series, the free stack traces for mempool objects are also not properly evicted from the stack depot. Fix both issues by: 1. Evicting all stack traces when an object if freed if it was not put into quarantine; 2. Always evicting an existing free stack trace when a new one is saved. Also do a few related clean-ups: - Do not zero out free track when initializing/invalidating free meta: set a value in shadow memory instead; - Rename KASAN_SLAB_FREETRACK to KASAN_SLAB_FREE_META; - Drop the kasan_init_cache_meta function as it's not used by KASAN; - Add comments for the kasan_alloc_meta and kasan_free_meta structs. [akpm@linux-foundation.org: make release_free_meta() and release_alloc_meta() static] Link: https://lkml.kernel.org/r/20231226225121.235865-1-andrey.konovalov@linux.dev Fixes: 773688a6cb24 ("kasan: use stack_depot_put for Generic mode") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: simplify saving extra info into tracksAndrey Konovalov1-2/+10
Avoid duplicating code for saving extra info into tracks: reuse the common function for this. Link: https://lkml.kernel.org/r/20231221183540.168428-3-andrey.konovalov@linux.dev Fixes: 5d4c6ac94694 ("kasan: record and report more information") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Juntong Deng <juntong.deng@outlook.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: clean up is_kfence_address checksAndrey Konovalov1-9/+17
1. Do not untag addresses that are passed to is_kfence_address: it tolerates tagged addresses. 2. Move is_kfence_address checks from internal KASAN functions (kasan_poison/unpoison, etc.) to external-facing ones. Note that kasan_poison/unpoison are never called outside of KASAN/slab code anymore; the comment is wrong, so drop it. 3. Simplify/reorganize the code around the updated checks. Link: https://lkml.kernel.org/r/1065732315ef4e141b6177d8f612232d4d5bc0ab.1703188911.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: rename and document kasan_(un)poison_object_dataAndrey Konovalov1-2/+2
Rename kasan_unpoison_object_data to kasan_unpoison_new_object and add a documentation comment. Do the same for kasan_poison_object_data. The new names and the comments should suggest the users that these hooks are intended for internal use by the slab allocator. The following patch will remove non-slab-internal uses of these hooks. No functional changes. [andreyknvl@google.com: update references to renamed functions in comments] Link: https://lkml.kernel.org/r/20231221180637.105098-1-andrey.konovalov@linux.dev Link: https://lkml.kernel.org/r/eab156ebbd635f9635ef67d1a4271f716994e628.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: save alloc stack traces for mempoolAndrey Konovalov1-10/+40
Update kasan_mempool_unpoison_object to properly poison the redzone and save alloc strack traces for kmalloc and slab pools. As a part of this change, split out and use a unpoison_slab_object helper function from __kasan_slab_alloc. [nathan@kernel.org: mark unpoison_slab_object() as static] Link: https://lkml.kernel.org/r/20231221180042.104694-1-andrey.konovalov@linux.dev Link: https://lkml.kernel.org/r/05ad235da8347cfe14d496d01b2aaf074b4f607c.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: introduce poison_kmalloc_large_redzoneAndrey Konovalov1-18/+23
Split out a poison_kmalloc_large_redzone helper from __kasan_kmalloc_large and use it in the caller's code. This is a preparatory change for the following patches in this series. Link: https://lkml.kernel.org/r/93317097b668519d76097fb065201b2027436e22.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: clean up and rename ____kasan_kmallocAndrey Konovalov1-20/+22
Introduce a new poison_kmalloc_redzone helper function that poisons the redzone for kmalloc object. Drop the confusingly named ____kasan_kmalloc function and instead use poison_kmalloc_redzone along with the other required parts of ____kasan_kmalloc in the callers' code. This is a preparatory change for the following patches in this series. Link: https://lkml.kernel.org/r/5881232ad357ec0d59a5b1aefd9e0673a386399a.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: save free stack traces for slab mempoolsAndrey Konovalov1-11/+9
Make kasan_mempool_poison_object save free stack traces for slab and kmalloc mempools when the object is freed into the mempool. Also simplify and rename ____kasan_slab_free to poison_slab_object and do a few other reability changes. Link: https://lkml.kernel.org/r/413a7c7c3344fb56809853339ffaabc9e4905e94.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: clean up __kasan_mempool_poison_objectAndrey Konovalov1-12/+7
Reorganize the code and reword the comment in __kasan_mempool_poison_object to improve the code readability. Link: https://lkml.kernel.org/r/4f6fc8840512286c1a96e16e86901082c671677d.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: introduce kasan_mempool_unpoison_pagesAndrey Konovalov1-0/+6
Introduce and document a new kasan_mempool_unpoison_pages hook to be used by the mempool code instead of kasan_unpoison_pages. This hook is not functionally different from kasan_unpoison_pages, but using it improves the mempool code readability. Link: https://lkml.kernel.org/r/239bd9af6176f2cc59f5c25893eb36143184daff.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: introduce kasan_mempool_poison_pagesAndrey Konovalov1-0/+23
Introduce and document a kasan_mempool_poison_pages hook to be used by the mempool code instead of kasan_poison_pages. Compated to kasan_poison_pages, the new hook: 1. For the tag-based modes, skips checking and poisoning allocations that were not tagged due to sampling. 2. Checks for double-free and invalid-free bugs. In the future, kasan_poison_pages can also be updated to handle #2, but this is out-of-scope of this series. Link: https://lkml.kernel.org/r/88dc7340cce28249abf789f6e0c792c317df9ba5.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: introduce kasan_mempool_unpoison_objectAndrey Konovalov1-0/+5
Introduce and document a kasan_mempool_unpoison_object hook. This hook serves as a replacement for the generic kasan_unpoison_range that the mempool code relies on right now. mempool will be updated to use the new hook in one of the following patches. For now, define the new hook to be identical to kasan_unpoison_range. One of the following patches will update it to add stack trace collection. Link: https://lkml.kernel.org/r/dae25f0e18ed8fd50efe509c5b71a0592de5c18d.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: add return value for kasan_mempool_poison_objectAndrey Konovalov1-11/+10
Add a return value for kasan_mempool_poison_object that lets the caller know whether the allocation is affected by a double-free or an invalid-free bug. The caller can use this return value to stop operating on the object. Also introduce a check_page_allocation helper function to improve the code readability. Link: https://lkml.kernel.org/r/618af65273875fb9f56954285443279b15f1fcd9.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: move kasan_mempool_poison_objectAndrey Konovalov1-23/+23
Move kasan_mempool_poison_object after all slab-related KASAN hooks. This is a preparatory change for the following patches in this series. No functional changes. Link: https://lkml.kernel.org/r/23ea215409f43c13cdf9ecc454501a264c107d67.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-29kasan: rename kasan_slab_free_mempool to kasan_mempool_poison_objectAndrey Konovalov1-2/+2
Patch series "kasan: save mempool stack traces". This series updates KASAN to save alloc and free stack traces for secondary-level allocators that cache and reuse allocations internally instead of giving them back to the underlying allocator (e.g. mempool). As a part of this change, introduce and document a set of KASAN hooks: bool kasan_mempool_poison_pages(struct page *page, unsigned int order); void kasan_mempool_unpoison_pages(struct page *page, unsigned int order); bool kasan_mempool_poison_object(void *ptr); void kasan_mempool_unpoison_object(void *ptr, size_t size); and use them in the mempool code. Besides mempool, skbuff and io_uring also cache allocations and already use KASAN hooks to poison those. Their code is updated to use the new mempool hooks. The new hooks save alloc and free stack traces (for normal kmalloc and slab objects; stack traces for large kmalloc objects and page_alloc are not supported by KASAN yet), improve the readability of the users' code, and also allow the users to prevent double-free and invalid-free bugs; see the patches for the details. This patch (of 21): Rename kasan_slab_free_mempool to kasan_mempool_poison_object. kasan_slab_free_mempool is a slightly confusing name: it is unclear whether this function poisons the object when it is freed into mempool or does something when the object is freed from mempool to the underlying allocator. The new name also aligns with other mempool-related KASAN hooks added in the following patches in this series. Link: https://lkml.kernel.org/r/cover.1703024586.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/c5618685abb7cdbf9fb4897f565e7759f601da84.1703024586.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Breno Leitao <leitao@debian.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-11kasan: record and report more informationJuntong Deng1-0/+8
Record and report more information to help us find the cause of the bug and to help us correlate the error with other system events. This patch adds recording and showing CPU number and timestamp at allocation and free (controlled by CONFIG_KASAN_EXTRA_INFO). The timestamps in the report use the same format and source as printk. Error occurrence timestamp is already implicit in the printk log, and CPU number is already shown by dump_stack_lvl, so there is no need to add it. In order to record CPU number and timestamp at allocation and free, corresponding members need to be added to the relevant data structures, which will lead to increased memory consumption. In Generic KASAN, members are added to struct kasan_track. Since in most cases, alloc meta is stored in the redzone and free meta is stored in the object or the redzone, memory consumption will not increase much. In SW_TAGS KASAN and HW_TAGS KASAN, members are added to struct kasan_stack_ring_entry. Memory consumption increases as the size of struct kasan_stack_ring_entry increases (this part of the memory is allocated by memblock), but since this is configurable, it is up to the user to choose. Link: https://lkml.kernel.org/r/VI1P193MB0752BD991325D10E4AB1913599BDA@VI1P193MB0752.EURP193.PROD.OUTLOOK.COM Signed-off-by: Juntong Deng <juntong.deng@outlook.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-11kasan: use stack_depot_put for Generic modeAndrey Konovalov1-1/+2
Evict alloc/free stack traces from the stack depot for Generic KASAN once they are evicted from the quaratine. For auxiliary stack traces, evict the oldest stack trace once a new one is saved (KASAN only keeps references to the last two). Also evict all saved stack traces on krealloc. To avoid double-evicting and mis-evicting stack traces (in case KASAN's metadata was corrupted), reset KASAN's per-object metadata that stores stack depot handles when the object is initialized and when it's evicted from the quarantine. Note that stack_depot_put is no-op if the handle is 0. Link: https://lkml.kernel.org/r/5cef104d9b842899489b4054fe8d1339a71acee0.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-11lib/stackdepot, kasan: add flags to __stack_depot_save and renameAndrey Konovalov1-3/+4
Change the bool can_alloc argument of __stack_depot_save to a u32 argument that accepts a set of flags. The following patch will add another flag to stack_depot_save_flags besides the existing STACK_DEPOT_FLAG_CAN_ALLOC. Also rename the function to stack_depot_save_flags, as __stack_depot_save is a cryptic name, Link: https://lkml.kernel.org/r/645fa15239621eebbd3a10331e5864b718839512.1700502145.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Marco Elver <elver@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-12-05KASAN: remove code paths guarded by CONFIG_SLABVlastimil Babka1-11/+2
With SLAB removed and SLUB the only remaining allocator, we can clean up some code that was depending on the choice. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Marco Elver <elver@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: David Rientjes <rientjes@google.com> Tested-by: David Rientjes <rientjes@google.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2023-06-10kasan: use internal prototypes matching gcc-13 builtinsArnd Bergmann1-1/+1
gcc-13 warns about function definitions for builtin interfaces that have a different prototype, e.g.: In file included from kasan_test.c:31: kasan.h:574:6: error: conflicting types for built-in function '__asan_register_globals'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch] 574 | void __asan_register_globals(struct kasan_global *globals, size_t size); kasan.h:577:6: error: conflicting types for built-in function '__asan_alloca_poison'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch] 577 | void __asan_alloca_poison(unsigned long addr, size_t size); kasan.h:580:6: error: conflicting types for built-in function '__asan_load1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 580 | void __asan_load1(unsigned long addr); kasan.h:581:6: error: conflicting types for built-in function '__asan_store1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 581 | void __asan_store1(unsigned long addr); kasan.h:643:6: error: conflicting types for built-in function '__hwasan_tag_memory'; expected 'void(void *, unsigned char, long int)' [-Werror=builtin-declaration-mismatch] 643 | void __hwasan_tag_memory(unsigned long addr, u8 tag, unsigned long size); The two problems are: - Addresses are passes as 'unsigned long' in the kernel, but gcc-13 expects a 'void *'. - sizes meant to use a signed ssize_t rather than size_t. Change all the prototypes to match these. Using 'void *' consistently for addresses gets rid of a couple of type casts, so push that down to the leaf functions where possible. This now passes all randconfig builds on arm, arm64 and x86, but I have not tested it on the other architectures that support kasan, since they tend to fail randconfig builds in other ways. This might fail if any of the 32-bit architectures expect a 'long' instead of 'int' for the size argument. The __asan_allocas_unpoison() function prototype is somewhat weird, since it uses a pointer for 'stack_top' and an size_t for 'stack_bottom'. This looks like it is meant to be 'addr' and 'size' like the others, but the implementation clearly treats them as 'top' and 'bottom'. Link: https://lkml.kernel.org/r/20230509145735.9263-2-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-17lib/stacktrace, kasan, kmsan: rework extra_bits interfaceAndrey Konovalov1-1/+1
The current implementation of the extra_bits interface is confusing: passing extra_bits to __stack_depot_save makes it seem that the extra bits are somehow stored in stack depot. In reality, they are only embedded into a stack depot handle and are not used within stack depot. Drop the extra_bits argument from __stack_depot_save and instead provide a new stack_depot_set_extra_bits function (similar to the exsiting stack_depot_get_extra_bits) that saves extra bits into a stack depot handle. Update the callers of __stack_depot_save to use the new interace. This change also fixes a minor issue in the old code: __stack_depot_save does not return NULL if saving stack trace fails and extra_bits is used. Link: https://lkml.kernel.org/r/317123b5c05e2f82854fc55d8b285e0869d3cb77.1676063693.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-02-11Merge branch 'mm-hotfixes-stable' into mm-stableAndrew Morton1-0/+3
To pick up depended-upon changes
2023-02-10kasan: fix Oops due to missing calls to kasan_arch_is_ready()Christophe Leroy1-0/+3
On powerpc64, you can build a kernel with KASAN as soon as you build it with RADIX MMU support. However if the CPU doesn't have RADIX MMU, KASAN isn't enabled at init and the following Oops is encountered. [ 0.000000][ T0] KASAN not enabled as it requires radix! [ 4.484295][ T26] BUG: Unable to handle kernel data access at 0xc00e000000804a04 [ 4.485270][ T26] Faulting instruction address: 0xc00000000062ec6c [ 4.485748][ T26] Oops: Kernel access of bad area, sig: 11 [#1] [ 4.485920][ T26] BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries [ 4.486259][ T26] Modules linked in: [ 4.486637][ T26] CPU: 0 PID: 26 Comm: kworker/u2:2 Not tainted 6.2.0-rc3-02590-gf8a023b0a805 #249 [ 4.486907][ T26] Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1200 0xf000005 of:SLOF,HEAD pSeries [ 4.487445][ T26] Workqueue: eval_map_wq .tracer_init_tracefs_work_func [ 4.488744][ T26] NIP: c00000000062ec6c LR: c00000000062bb84 CTR: c0000000002ebcd0 [ 4.488867][ T26] REGS: c0000000049175c0 TRAP: 0380 Not tainted (6.2.0-rc3-02590-gf8a023b0a805) [ 4.489028][ T26] MSR: 8000000002009032 <SF,VEC,EE,ME,IR,DR,RI> CR: 44002808 XER: 00000000 [ 4.489584][ T26] CFAR: c00000000062bb80 IRQMASK: 0 [ 4.489584][ T26] GPR00: c0000000005624d4 c000000004917860 c000000001cfc000 1800000000804a04 [ 4.489584][ T26] GPR04: c0000000003a2650 0000000000000cc0 c00000000000d3d8 c00000000000d3d8 [ 4.489584][ T26] GPR08: c0000000049175b0 a80e000000000000 0000000000000000 0000000017d78400 [ 4.489584][ T26] GPR12: 0000000044002204 c000000003790000 c00000000435003c c0000000043f1c40 [ 4.489584][ T26] GPR16: c0000000043f1c68 c0000000043501a0 c000000002106138 c0000000043f1c08 [ 4.489584][ T26] GPR20: c0000000043f1c10 c0000000043f1c20 c000000004146c40 c000000002fdb7f8 [ 4.489584][ T26] GPR24: c000000002fdb834 c000000003685e00 c000000004025030 c000000003522e90 [ 4.489584][ T26] GPR28: 0000000000000cc0 c0000000003a2650 c000000004025020 c000000004025020 [ 4.491201][ T26] NIP [c00000000062ec6c] .kasan_byte_accessible+0xc/0x20 [ 4.491430][ T26] LR [c00000000062bb84] .__kasan_check_byte+0x24/0x90 [ 4.491767][ T26] Call Trace: [ 4.491941][ T26] [c000000004917860] [c00000000062ae70] .__kasan_kmalloc+0xc0/0x110 (unreliable) [ 4.492270][ T26] [c0000000049178f0] [c0000000005624d4] .krealloc+0x54/0x1c0 [ 4.492453][ T26] [c000000004917990] [c0000000003a2650] .create_trace_option_files+0x280/0x530 [ 4.492613][ T26] [c000000004917a90] [c000000002050d90] .tracer_init_tracefs_work_func+0x274/0x2c0 [ 4.492771][ T26] [c000000004917b40] [c0000000001f9948] .process_one_work+0x578/0x9f0 [ 4.492927][ T26] [c000000004917c30] [c0000000001f9ebc] .worker_thread+0xfc/0x950 [ 4.493084][ T26] [c000000004917d60] [c00000000020be84] .kthread+0x1a4/0x1b0 [ 4.493232][ T26] [c000000004917e10] [c00000000000d3d8] .ret_from_kernel_thread+0x58/0x60 [ 4.495642][ T26] Code: 60000000 7cc802a6 38a00000 4bfffc78 60000000 7cc802a6 38a00001 4bfffc68 60000000 3d20a80e 7863e8c2 792907c6 <7c6348ae> 20630007 78630fe0 68630001 [ 4.496704][ T26] ---[ end trace 0000000000000000 ]--- The Oops is due to kasan_byte_accessible() not checking the readiness of KASAN. Add missing call to kasan_arch_is_ready() and bail out when not ready. The same problem is observed with ____kasan_kfree_large() so fix it the same. Also, as KASAN is not available and no shadow area is allocated for linear memory mapping, there is no point in allocating shadow mem for vmalloc memory as shown below in /sys/kernel/debug/kernel_page_tables ---[ kasan shadow mem start ]--- 0xc00f000000000000-0xc00f00000006ffff 0x00000000040f0000 448K r w pte valid present dirty accessed 0xc00f000000860000-0xc00f00000086ffff 0x000000000ac10000 64K r w pte valid present dirty accessed 0xc00f3ffffffe0000-0xc00f3fffffffffff 0x0000000004d10000 128K r w pte valid present dirty accessed ---[ kasan shadow mem end ]--- So, also verify KASAN readiness before allocating and poisoning shadow mem for VMAs. Link: https://lkml.kernel.org/r/150768c55722311699fdcf8f5379e8256749f47d.1674716617.git.christophe.leroy@csgroup.eu Fixes: 41b7a347bf14 ("powerpc: Book3S 64-bit outline-only KASAN support") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reported-by: Nathan Lynch <nathanl@linux.ibm.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: <stable@vger.kernel.org> [5.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-19mm/kasan: simplify and refine kasan_cache codeFeng Tang1-7/+2
struct 'kasan_cache' has a member 'is_kmalloc' indicating whether its host kmem_cache is a kmalloc cache. With newly introduced is_kmalloc_cache() helper, 'is_kmalloc' and its related function can be replaced and removed. Also 'kasan_cache' is only needed by KASAN generic mode, and not by SW/HW tag modes, so refine its protection macro accordingly, suggested by Andrey Konoval. Link: https://lkml.kernel.org/r/20230104060605.930910-2-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: David Rientjes <rientjes@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Christoph Lameter <cl@linux.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-01-19kasan: allow sampling page_alloc allocations for HW_TAGSAndrey Konovalov1-2/+7
As Hardware Tag-Based KASAN is intended to be used in production, its performance impact is crucial. As page_alloc allocations tend to be big, tagging and checking all such allocations can introduce a significant slowdown. Add two new boot parameters that allow to alleviate that slowdown: - kasan.page_alloc.sample, which makes Hardware Tag-Based KASAN tag only every Nth page_alloc allocation with the order configured by the second added parameter (default: tag every such allocation). - kasan.page_alloc.sample.order, which makes sampling enabled by the first parameter only affect page_alloc allocations with the order equal or greater than the specified value (default: 3, see below). The exact performance improvement caused by using the new parameters depends on their values and the applied workload. The chosen default value for kasan.page_alloc.sample.order is 3, which matches both PAGE_ALLOC_COSTLY_ORDER and SKB_FRAG_PAGE_ORDER. This is done for two reasons: 1. PAGE_ALLOC_COSTLY_ORDER is "the order at which allocations are deemed costly to service", which corresponds to the idea that only large and thus costly allocations are supposed to sampled. 2. One of the workloads targeted by this patch is a benchmark that sends a large amount of data over a local loopback connection. Most multi-page data allocations in the networking subsystem have the order of SKB_FRAG_PAGE_ORDER (or PAGE_ALLOC_COSTLY_ORDER). When running a local loopback test on a testing MTE-enabled device in sync mode, enabling Hardware Tag-Based KASAN introduces a ~50% slowdown. Applying this patch and setting kasan.page_alloc.sampling to a value higher than 1 allows to lower the slowdown. The performance improvement saturates around the sampling interval value of 10 with the default sampling page order of 3. This lowers the slowdown to ~20%. The slowdown in real scenarios involving the network will likely be better. Enabling page_alloc sampling has a downside: KASAN misses bad accesses to a page_alloc allocation that has not been tagged. This lowers the value of KASAN as a security mitigation. However, based on measuring the number of page_alloc allocations of different orders during boot in a test build, sampling with the default kasan.page_alloc.sample.order value affects only ~7% of allocations. The rest ~93% of allocations are still checked deterministically. Link: https://lkml.kernel.org/r/129da0614123bb85ed4dd61ae30842b2dd7c903f.1671471846.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Jann Horn <jannh@google.com> Cc: Mark Brand <markbrand@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04stackdepot: reserve 5 extra bits in depot_stack_handle_tAlexander Potapenko1-1/+1
Some users (currently only KMSAN) may want to use spare bits in depot_stack_handle_t. Let them do so by adding @extra_bits to __stack_depot_save() to store arbitrary flags, and providing stack_depot_get_extra_bits() to retrieve those flags. Also adapt KASAN to the new prototype by passing extra_bits=0, as KASAN does not intend to store additional information in the stack handle. Link: https://lkml.kernel.org/r/20220915150417.722975-3-glider@google.com Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vegard Nossum <vegard.nossum@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: use kasan_addr_to_slab in print_address_descriptionAndrey Konovalov1-0/+7
Use the kasan_addr_to_slab() helper in print_address_description() instead of separately invoking PageSlab() and page_slab(). Link: https://lkml.kernel.org/r/8b744fbf8c3c7fc5d34329ec70b60ee5c8dba66c.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: pass tagged pointers to kasan_save_alloc/free_infoAndrey Konovalov1-4/+2
Pass tagged pointers to kasan_save_alloc/free_info(). This is a preparatory patch to simplify other changes in the series. Link: https://lkml.kernel.org/r/d5bc48cfcf0dca8269dc3ed863047e4d4d2030f1.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: only define kasan_cache_create for Generic modeAndrey Konovalov1-16/+0
Right now, kasan_cache_create() assigns SLAB_KASAN for all KASAN modes and then sets up metadata-related cache parameters for the Generic mode. SLAB_KASAN is used in two places: 1. In slab_ksize() to account for per-object metadata when calculating the size of the accessible memory within the object. 2. In slab_common.c via kasan_never_merge() to prevent merging of caches with per-object metadata. Both cases are only relevant when per-object metadata is present, which is only the case with the Generic mode. Thus, assign SLAB_KASAN and define kasan_cache_create() only for the Generic mode. Also update the SLAB_KASAN-related comment. Link: https://lkml.kernel.org/r/61faa2aa1906e2d02c97d00ddf99ce8911dda095.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: only define kasan_never_merge for Generic modeAndrey Konovalov1-8/+0
KASAN prevents merging of slab caches whose objects have per-object metadata stored in redzones. As now only the Generic mode uses per-object metadata, define kasan_never_merge() only for this mode. Link: https://lkml.kernel.org/r/81ed01f29ff3443580b7e2fe362a8b47b1e8006d.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: only define kasan_metadata_size for Generic modeAndrey Konovalov1-11/+0
KASAN provides a helper for calculating the size of per-object metadata stored in the redzone. As now only the Generic mode uses per-object metadata, only define kasan_metadata_size() for this mode. Link: https://lkml.kernel.org/r/8f81d4938b80446bc72538a08217009f328a3e23.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: introduce kasan_init_cache_metaAndrey Konovalov1-78/+2
Add a kasan_init_cache_meta() helper that initializes metadata-related cache parameters and use this helper in the common KASAN code. Put the implementation of this new helper into generic.c, as only the Generic mode uses per-object metadata. Link: https://lkml.kernel.org/r/a6d7ea01876eb36472c9879f7b23f1b24766276e.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: introduce kasan_requires_metaAndrey Konovalov1-8/+5
Add a kasan_requires_meta() helper that indicates whether the enabled KASAN mode requires per-object metadata and use this helper in the common code. Also hide kasan_init_object_meta() under CONFIG_KASAN_GENERIC ifdef check, as Generic is the only mode that uses per-object metadata. To allow for a potential future change that makes Generic KASAN support the kasan.stacktrace command-line parameter, let kasan_requires_meta() return kasan_stack_collection_enabled() instead of simply returning true. Link: https://lkml.kernel.org/r/cf837e9996246aaaeebf704ccf8ec26a34fcf64f.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: move kasan_get_*_meta to generic.cAndrey Konovalov1-19/+0
Move the implementations of kasan_get_alloc/free_meta() to generic.c, as the common KASAN code does not use these functions anymore. Also drop kasan_reset_tag() from the implementation, as the Generic mode does not tag pointers. Link: https://lkml.kernel.org/r/ffcfc0ad654d78a2ef4ca054c943ddb4e5ca477b.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: introduce kasan_init_object_metaAndrey Konovalov1-7/+3
Add a kasan_init_object_meta() helper that initializes metadata for a slab object and use it in the common code. For now, the implementations of this helper are the same for the Generic and tag-based modes, but they will diverge later in the series. This change hides references to alloc_meta from the common code. This is desired as only the Generic mode will be using per-object metadata after this series. Link: https://lkml.kernel.org/r/47c12938fc7f8105e7aaa592527c0e9d3c81fc37.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: split save_alloc_info implementationsAndrey Konovalov1-11/+2
Provide standalone implementations of save_alloc_info() for the Generic and tag-based modes. For now, the implementations are the same, but they will diverge later in the series. Link: https://lkml.kernel.org/r/77f1a078489c1e859aedb5403f772e5e1f7410a0.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: move is_kmalloc check out of save_alloc_infoAndrey Konovalov1-10/+5
Move kasan_info.is_kmalloc check out of save_alloc_info(). This is a preparatory change that simplifies the following patches in this series. Link: https://lkml.kernel.org/r/df89f1915b788f9a10319905af6d0202a3b30c30.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: rename kasan_set_*_info to kasan_save_*_infoAndrey Konovalov1-4/+4
Rename set_alloc_info() and kasan_set_free_info() to save_alloc_info() and kasan_save_free_info(). The new names make more sense. Link: https://lkml.kernel.org/r/9f04777a15cb9d96bf00331da98e021d732fe1c9.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-04kasan: check KASAN_NO_FREE_META in __kasan_metadata_sizeAndrey Konovalov1-2/+3
Patch series "kasan: switch tag-based modes to stack ring from per-object metadata", v3. This series makes the tag-based KASAN modes use a ring buffer for storing stack depot handles for alloc/free stack traces for slab objects instead of per-object metadata. This ring buffer is referred to as the stack ring. On each alloc/free of a slab object, the tagged address of the object and the current stack trace are recorded in the stack ring. On each bug report, if the accessed address belongs to a slab object, the stack ring is scanned for matching entries. The newest entries are used to print the alloc/free stack traces in the report: one entry for alloc and one for free. The advantages of this approach over storing stack trace handles in per-object metadata with the tag-based KASAN modes: - Allows to find relevant stack traces for use-after-free bugs without using quarantine for freed memory. (Currently, if the object was reallocated multiple times, the report contains the latest alloc/free stack traces, not necessarily the ones relevant to the buggy allocation.) - Allows to better identify and mark use-after-free bugs, effectively making the CONFIG_KASAN_TAGS_IDENTIFY functionality always-on. - Has fixed memory overhead. The disadvantage: - If the affected object was allocated/freed long before the bug happened and the stack trace events were purged from the stack ring, the report will have no stack traces. Discussion ========== The proposed implementation of the stack ring uses a single ring buffer for the whole kernel. This might lead to contention due to atomic accesses to the ring buffer index on multicore systems. At this point, it is unknown whether the performance impact from this contention would be significant compared to the slowdown introduced by collecting stack traces due to the planned changes to the latter part, see the section below. For now, the proposed implementation is deemed to be good enough, but this might need to be revisited once the stack collection becomes faster. A considered alternative is to keep a separate ring buffer for each CPU and then iterate over all of them when printing a bug report. This approach requires somehow figuring out which of the stack rings has the freshest stack traces for an object if multiple stack rings have them. Further plans ============= This series is a part of an effort to make KASAN stack trace collection suitable for production. This requires stack trace collection to be fast and memory-bounded. The planned steps are: 1. Speed up stack trace collection (potentially, by using SCS; patches on-hold until steps #2 and #3 are completed). 2. Keep stack trace handles in the stack ring (this series). 3. Add a memory-bounded mode to stack depot or provide an alternative memory-bounded stack storage. 4. Potentially, implement stack trace collection sampling to minimize the performance impact. This patch (of 34): __kasan_metadata_size() calculates the size of the redzone for objects in a slab cache. When accounting for presence of kasan_free_meta in the redzone, this function only compares free_meta_offset with 0. But free_meta_offset could also be equal to KASAN_NO_FREE_META, which indicates that kasan_free_meta is not present at all. Add a comparison with KASAN_NO_FREE_META into __kasan_metadata_size(). Link: https://lkml.kernel.org/r/cover.1662411799.git.andreyknvl@google.com Link: https://lkml.kernel.org/r/c7b316d30d90e5947eb8280f4dc78856a49298cf.1662411799.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Peter Collingbourne <pcc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-06Merge tag 'mm-stable-2022-08-03' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "Most of the MM queue. A few things are still pending. Liam's maple tree rework didn't make it. This has resulted in a few other minor patch series being held over for next time. Multi-gen LRU still isn't merged as we were waiting for mapletree to stabilize. The current plan is to merge MGLRU into -mm soon and to later reintroduce mapletree, with a view to hopefully getting both into 6.1-rc1. Summary: - The usual batches of cleanups from Baoquan He, Muchun Song, Miaohe Lin, Yang Shi, Anshuman Khandual and Mike Rapoport - Some kmemleak fixes from Patrick Wang and Waiman Long - DAMON updates from SeongJae Park - memcg debug/visibility work from Roman Gushchin - vmalloc speedup from Uladzislau Rezki - more folio conversion work from Matthew Wilcox - enhancements for coherent device memory mapping from Alex Sierra - addition of shared pages tracking and CoW support for fsdax, from Shiyang Ruan - hugetlb optimizations from Mike Kravetz - Mel Gorman has contributed some pagealloc changes to improve latency and realtime behaviour. - mprotect soft-dirty checking has been improved by Peter Xu - Many other singleton patches all over the place" [ XFS merge from hell as per Darrick Wong in https://lore.kernel.org/all/YshKnxb4VwXycPO8@magnolia/ ] * tag 'mm-stable-2022-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (282 commits) tools/testing/selftests/vm/hmm-tests.c: fix build mm: Kconfig: fix typo mm: memory-failure: convert to pr_fmt() mm: use is_zone_movable_page() helper hugetlbfs: fix inaccurate comment in hugetlbfs_statfs() hugetlbfs: cleanup some comments in inode.c hugetlbfs: remove unneeded header file hugetlbfs: remove unneeded hugetlbfs_ops forward declaration hugetlbfs: use helper macro SZ_1{K,M} mm: cleanup is_highmem() mm/hmm: add a test for cross device private faults selftests: add soft-dirty into run_vmtests.sh selftests: soft-dirty: add test for mprotect mm/mprotect: fix soft-dirty check in can_change_pte_writable() mm: memcontrol: fix potential oom_lock recursion deadlock mm/gup.c: fix formatting in check_and_migrate_movable_page() xfs: fail dax mount if reflink is enabled on a partition mm/memcontrol.c: remove the redundant updating of stats_flush_threshold userfaultfd: don't fail on unrecognized features hugetlb_cgroup: fix wrong hugetlb cgroup numa stat ...
2022-07-18kasan: separate double free case from invalid freeKuan-Ying Lee1-4/+4
Currently, KASAN describes all invalid-free/double-free bugs as "double-free or invalid-free". This is ambiguous. KASAN should report "double-free" when a double-free is a more likely cause (the address points to the start of an object) and report "invalid-free" otherwise [1]. [1] https://bugzilla.kernel.org/show_bug.cgi?id=212193 Link: https://lkml.kernel.org/r/20220615062219.22618-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Yee Lee <yee.lee@mediatek.com> Cc: Andrew Yang <andrew.yang@mediatek.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-07mm: kasan: Ensure the tags are visible before the tag in page->flagsCatalin Marinas1-1/+2
__kasan_unpoison_pages() colours the memory with a random tag and stores it in page->flags in order to re-create the tagged pointer via page_to_virt() later. When the tag from the page->flags is read, ensure that the in-memory tags are already visible by re-ordering the page_kasan_tag_set() after kasan_unpoison(). The former already has barriers in place through try_cmpxchg(). On the reader side, the order is ensured by the address dependency between page->flags and the memory access. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Link: https://lore.kernel.org/r/20220610152141.2148929-2-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-05-13kasan: give better names to shadow valuesAndrey Konovalov1-6/+6
Rename KASAN_KMALLOC_* shadow values to KASAN_SLAB_*, as they are used for all slab allocations, not only for kmalloc. Also rename KASAN_FREE_PAGE to KASAN_PAGE_FREE to be consistent with KASAN_PAGE_REDZONE and KASAN_SLAB_FREE. Link: https://lkml.kernel.org/r/bebcaf4eafdb0cabae0401a69c0af956aa87fcaa.1652111464.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-03-25kasan, page_alloc: merge kasan_alloc_pages into post_alloc_hookAndrey Konovalov1-1/+1
Currently, the code responsible for initializing and poisoning memory in post_alloc_hook() is scattered across two locations: kasan_alloc_pages() hook for HW_TAGS KASAN and post_alloc_hook() itself. This is confusing. This and a few following patches combine the code from these two locations. Along the way, these patches do a step-by-step restructure the many performed checks to make them easier to follow. Replace the only caller of kasan_alloc_pages() with its implementation. As kasan_has_integrated_init() is only true when CONFIG_KASAN_HW_TAGS is enabled, moving the code does no functional changes. Also move init and init_tags variables definitions out of kasan_has_integrated_init() clause in post_alloc_hook(), as they have the same values regardless of what the if condition evaluates to. This patch is not useful by itself but makes the simplifications in the following patches easier to follow. Link: https://lkml.kernel.org/r/5ac7e0b30f5cbb177ec363ddd7878a3141289592.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-25kasan, page_alloc: merge kasan_free_pages into free_pages_prepareAndrey Konovalov1-1/+1
Currently, the code responsible for initializing and poisoning memory in free_pages_prepare() is scattered across two locations: kasan_free_pages() for HW_TAGS KASAN and free_pages_prepare() itself. This is confusing. This and a few following patches combine the code from these two locations. Along the way, these patches also simplify the performed checks to make them easier to follow. Replaces the only caller of kasan_free_pages() with its implementation. As kasan_has_integrated_init() is only true when CONFIG_KASAN_HW_TAGS is enabled, moving the code does no functional changes. This patch is not useful by itself but makes the simplifications in the following patches easier to follow. Link: https://lkml.kernel.org/r/303498d15840bb71905852955c6e2390ecc87139.1643047180.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Marco Elver <elver@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>