summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/pci/pci-armada8k.txt
blob: 8324a4ee6f06651f6b25d0bd1ddf476fa458d6f7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
* Marvell Armada 7K/8K PCIe interface

This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.

Required properties:
- compatible: "marvell,armada8k-pcie"
- reg: must contain two register regions
   - the control register region
   - the config space region
- reg-names:
   - "ctrl" for the control register region
   - "config" for the config space region
- interrupts: Interrupt specifier for the PCIe controler
- clocks: reference to the PCIe controller clocks
- clock-names: mandatory if there is a second clock, in this case the
   name must be "core" for the first clock and "reg" for the second
   one

Optional properties:
- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
	Either 1, 2 or 4 PHYs might be needed depending on the number of
	PCIe lanes.
- phy-names: names of the PHYs corresponding to the number of lanes.
	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
	2 PHYs.

Example:

	pcie@f2600000 {
		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
		reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
		reg-names = "ctrl", "config";
		#address-cells = <3>;
		#size-cells = <2>;
		#interrupt-cells = <1>;
		device_type = "pci";
		dma-coherent;

		bus-range = <0 0xff>;
		ranges = <0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000	/* downstream I/O */
			  0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;	/* non-prefetchable memory */
		interrupt-map-mask = <0 0 0 0>;
		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
		num-lanes = <1>;
		clocks = <&cpm_syscon0 1 13>;
	};