1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
|
// SPDX-License-Identifier: GPL-2.0-only
// Copyright (C) 2014 Broadcom Corporation
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#define IDM_CTRL_DIRECT_OFFSET 0x00
#define CFG_OFFSET 0x00
#define CFG_RESET_SHIFT 31
#define CFG_EN_SHIFT 30
#define CFG_SLAVE_ADDR_0_SHIFT 28
#define CFG_M_RETRY_CNT_SHIFT 16
#define CFG_M_RETRY_CNT_MASK 0x0f
#define TIM_CFG_OFFSET 0x04
#define TIM_CFG_MODE_400_SHIFT 31
#define TIM_RAND_SLAVE_STRETCH_SHIFT 24
#define TIM_RAND_SLAVE_STRETCH_MASK 0x7f
#define TIM_PERIODIC_SLAVE_STRETCH_SHIFT 16
#define TIM_PERIODIC_SLAVE_STRETCH_MASK 0x7f
#define S_CFG_SMBUS_ADDR_OFFSET 0x08
#define S_CFG_EN_NIC_SMB_ADDR3_SHIFT 31
#define S_CFG_NIC_SMB_ADDR3_SHIFT 24
#define S_CFG_NIC_SMB_ADDR3_MASK 0x7f
#define S_CFG_EN_NIC_SMB_ADDR2_SHIFT 23
#define S_CFG_NIC_SMB_ADDR2_SHIFT 16
#define S_CFG_NIC_SMB_ADDR2_MASK 0x7f
#define S_CFG_EN_NIC_SMB_ADDR1_SHIFT 15
#define S_CFG_NIC_SMB_ADDR1_SHIFT 8
#define S_CFG_NIC_SMB_ADDR1_MASK 0x7f
#define S_CFG_EN_NIC_SMB_ADDR0_SHIFT 7
#define S_CFG_NIC_SMB_ADDR0_SHIFT 0
#define S_CFG_NIC_SMB_ADDR0_MASK 0x7f
#define M_FIFO_CTRL_OFFSET 0x0c
#define M_FIFO_RX_FLUSH_SHIFT 31
#define M_FIFO_TX_FLUSH_SHIFT 30
#define M_FIFO_RX_CNT_SHIFT 16
#define M_FIFO_RX_CNT_MASK 0x7f
#define M_FIFO_RX_THLD_SHIFT 8
#define M_FIFO_RX_THLD_MASK 0x3f
#define S_FIFO_CTRL_OFFSET 0x10
#define S_FIFO_RX_FLUSH_SHIFT 31
#define S_FIFO_TX_FLUSH_SHIFT 30
#define S_FIFO_RX_CNT_SHIFT 16
#define S_FIFO_RX_CNT_MASK 0x7f
#define S_FIFO_RX_THLD_SHIFT 8
#define S_FIFO_RX_THLD_MASK 0x3f
#define M_CMD_OFFSET 0x30
#define M_CMD_START_BUSY_SHIFT 31
#define M_CMD_STATUS_SHIFT 25
#define M_CMD_STATUS_MASK 0x07
#define M_CMD_STATUS_SUCCESS 0x0
#define M_CMD_STATUS_LOST_ARB 0x1
#define M_CMD_STATUS_NACK_ADDR 0x2
#define M_CMD_STATUS_NACK_DATA 0x3
#define M_CMD_STATUS_TIMEOUT 0x4
#define M_CMD_STATUS_FIFO_UNDERRUN 0x5
#define M_CMD_STATUS_RX_FIFO_FULL 0x6
#define M_CMD_PROTOCOL_SHIFT 9
#define M_CMD_PROTOCOL_MASK 0xf
#define M_CMD_PROTOCOL_QUICK 0x0
#define M_CMD_PROTOCOL_BLK_WR 0x7
#define M_CMD_PROTOCOL_BLK_RD 0x8
#define M_CMD_PROTOCOL_PROCESS 0xa
#define M_CMD_PEC_SHIFT 8
#define M_CMD_RD_CNT_SHIFT 0
#define M_CMD_RD_CNT_MASK 0xff
#define S_CMD_OFFSET 0x34
#define S_CMD_START_BUSY_SHIFT 31
#define S_CMD_STATUS_SHIFT 23
#define S_CMD_STATUS_MASK 0x07
#define S_CMD_STATUS_SUCCESS 0x0
#define S_CMD_STATUS_TIMEOUT 0x5
#define S_CMD_STATUS_MASTER_ABORT 0x7
#define IE_OFFSET 0x38
#define IE_M_RX_FIFO_FULL_SHIFT 31
#define IE_M_RX_THLD_SHIFT 30
#define IE_M_START_BUSY_SHIFT 28
#define IE_M_TX_UNDERRUN_SHIFT 27
#define IE_S_RX_FIFO_FULL_SHIFT 26
#define IE_S_RX_THLD_SHIFT 25
#define IE_S_RX_EVENT_SHIFT 24
#define IE_S_START_BUSY_SHIFT 23
#define IE_S_TX_UNDERRUN_SHIFT 22
#define IE_S_RD_EVENT_SHIFT 21
#define IS_OFFSET 0x3c
#define IS_M_RX_FIFO_FULL_SHIFT 31
#define IS_M_RX_THLD_SHIFT 30
#define IS_M_START_BUSY_SHIFT 28
#define IS_M_TX_UNDERRUN_SHIFT 27
#define IS_S_RX_FIFO_FULL_SHIFT 26
#define IS_S_RX_THLD_SHIFT 25
#define IS_S_RX_EVENT_SHIFT 24
#define IS_S_START_BUSY_SHIFT 23
#define IS_S_TX_UNDERRUN_SHIFT 22
#define IS_S_RD_EVENT_SHIFT 21
#define M_TX_OFFSET 0x40
#define M_TX_WR_STATUS_SHIFT 31
#define M_TX_DATA_SHIFT 0
#define M_TX_DATA_MASK 0xff
#define M_RX_OFFSET 0x44
#define M_RX_STATUS_SHIFT 30
#define M_RX_STATUS_MASK 0x03
#define M_RX_PEC_ERR_SHIFT 29
#define M_RX_DATA_SHIFT 0
#define M_RX_DATA_MASK 0xff
#define S_TX_OFFSET 0x48
#define S_TX_WR_STATUS_SHIFT 31
#define S_TX_DATA_SHIFT 0
#define S_TX_DATA_MASK 0xff
#define S_RX_OFFSET 0x4c
#define S_RX_STATUS_SHIFT 30
#define S_RX_STATUS_MASK 0x03
#define S_RX_PEC_ERR_SHIFT 29
#define S_RX_DATA_SHIFT 0
#define S_RX_DATA_MASK 0xff
#define I2C_TIMEOUT_MSEC 50000
#define M_TX_RX_FIFO_SIZE 64
#define M_RX_FIFO_MAX_THLD_VALUE (M_TX_RX_FIFO_SIZE - 1)
#define M_RX_MAX_READ_LEN 255
#define M_RX_FIFO_THLD_VALUE 50
#define IE_M_ALL_INTERRUPT_SHIFT 27
#define IE_M_ALL_INTERRUPT_MASK 0x1e
#define SLAVE_READ_WRITE_BIT_MASK 0x1
#define SLAVE_READ_WRITE_BIT_SHIFT 0x1
#define SLAVE_MAX_SIZE_TRANSACTION 64
#define SLAVE_CLOCK_STRETCH_TIME 25
#define IE_S_ALL_INTERRUPT_SHIFT 21
#define IE_S_ALL_INTERRUPT_MASK 0x3f
/*
* It takes ~18us to reading 10bytes of data, hence to keep tasklet
* running for less time, max slave read per tasklet is set to 10 bytes.
*/
#define MAX_SLAVE_RX_PER_INT 10
enum i2c_slave_read_status {
I2C_SLAVE_RX_FIFO_EMPTY = 0,
I2C_SLAVE_RX_START,
I2C_SLAVE_RX_DATA,
I2C_SLAVE_RX_END,
};
enum bus_speed_index {
I2C_SPD_100K = 0,
I2C_SPD_400K,
};
enum bcm_iproc_i2c_type {
IPROC_I2C,
IPROC_I2C_NIC
};
struct bcm_iproc_i2c_dev {
struct device *device;
enum bcm_iproc_i2c_type type;
int irq;
void __iomem *base;
void __iomem *idm_base;
u32 ape_addr_mask;
/* lock for indirect access through IDM */
spinlock_t idm_lock;
struct i2c_adapter adapter;
unsigned int bus_speed;
struct completion done;
int xfer_is_done;
struct i2c_msg *msg;
struct i2c_client *slave;
/* bytes that have been transferred */
unsigned int tx_bytes;
/* bytes that have been read */
unsigned int rx_bytes;
unsigned int thld_bytes;
bool slave_rx_only;
bool rx_start_rcvd;
bool slave_read_complete;
u32 tx_underrun;
u32 slave_int_mask;
struct tasklet_struct slave_rx_tasklet;
};
/* tasklet to process slave rx data */
static void slave_rx_tasklet_fn(unsigned long);
/*
* Can be expanded in the future if more interrupt status bits are utilized
*/
#define ISR_MASK (BIT(IS_M_START_BUSY_SHIFT) | BIT(IS_M_TX_UNDERRUN_SHIFT)\
| BIT(IS_M_RX_THLD_SHIFT))
#define ISR_MASK_SLAVE (BIT(IS_S_START_BUSY_SHIFT)\
| BIT(IS_S_RX_EVENT_SHIFT) | BIT(IS_S_RD_EVENT_SHIFT)\
| BIT(IS_S_TX_UNDERRUN_SHIFT) | BIT(IS_S_RX_FIFO_FULL_SHIFT)\
| BIT(IS_S_RX_THLD_SHIFT))
static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave);
static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave);
static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
bool enable);
static inline u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c,
u32 offset)
{
u32 val;
if (iproc_i2c->idm_base) {
spin_lock(&iproc_i2c->idm_lock);
writel(iproc_i2c->ape_addr_mask,
iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET);
val = readl(iproc_i2c->base + offset);
spin_unlock(&iproc_i2c->idm_lock);
} else {
val = readl(iproc_i2c->base + offset);
}
return val;
}
static inline void iproc_i2c_wr_reg(struct bcm_iproc_i2c_dev *iproc_i2c,
u32 offset, u32 val)
{
if (iproc_i2c->idm_base) {
spin_lock(&iproc_i2c->idm_lock);
writel(iproc_i2c->ape_addr_mask,
iproc_i2c->idm_base + IDM_CTRL_DIRECT_OFFSET);
writel(val, iproc_i2c->base + offset);
spin_unlock(&iproc_i2c->idm_lock);
} else {
writel(val, iproc_i2c->base + offset);
}
}
static void bcm_iproc_i2c_slave_init(
struct bcm_iproc_i2c_dev *iproc_i2c, bool need_reset)
{
u32 val;
iproc_i2c->tx_underrun = 0;
if (need_reset) {
/* put controller in reset */
val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
val |= BIT(CFG_RESET_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
/* wait 100 usec per spec */
udelay(100);
/* bring controller out of reset */
val &= ~(BIT(CFG_RESET_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
}
/* flush TX/RX FIFOs */
val = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val);
/* Maximum slave stretch time */
val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
val &= ~(TIM_RAND_SLAVE_STRETCH_MASK << TIM_RAND_SLAVE_STRETCH_SHIFT);
val |= (SLAVE_CLOCK_STRETCH_TIME << TIM_RAND_SLAVE_STRETCH_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
/* Configure the slave address */
val = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
val |= BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
val &= ~(S_CFG_NIC_SMB_ADDR3_MASK << S_CFG_NIC_SMB_ADDR3_SHIFT);
val |= (iproc_i2c->slave->addr << S_CFG_NIC_SMB_ADDR3_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, val);
/* clear all pending slave interrupts */
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
/* Enable interrupt register to indicate a valid byte in receive fifo */
val = BIT(IE_S_RX_EVENT_SHIFT);
/* Enable interrupt register to indicate Slave Rx FIFO Full */
val |= BIT(IE_S_RX_FIFO_FULL_SHIFT);
/* Enable interrupt register to indicate a Master read transaction */
val |= BIT(IE_S_RD_EVENT_SHIFT);
/* Enable interrupt register for the Slave BUSY command */
val |= BIT(IE_S_START_BUSY_SHIFT);
iproc_i2c->slave_int_mask = val;
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
}
static void bcm_iproc_i2c_check_slave_status(
struct bcm_iproc_i2c_dev *iproc_i2c)
{
u32 val;
val = iproc_i2c_rd_reg(iproc_i2c, S_CMD_OFFSET);
/* status is valid only when START_BUSY is cleared after it was set */
if (val & BIT(S_CMD_START_BUSY_SHIFT))
return;
val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK;
if (val == S_CMD_STATUS_TIMEOUT || val == S_CMD_STATUS_MASTER_ABORT) {
dev_err(iproc_i2c->device, (val == S_CMD_STATUS_TIMEOUT) ?
"slave random stretch time timeout\n" :
"Master aborted read transaction\n");
/* re-initialize i2c for recovery */
bcm_iproc_i2c_enable_disable(iproc_i2c, false);
bcm_iproc_i2c_slave_init(iproc_i2c, true);
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
}
}
static void bcm_iproc_i2c_slave_read(struct bcm_iproc_i2c_dev *iproc_i2c)
{
u8 rx_data, rx_status;
u32 rx_bytes = 0;
u32 val;
while (rx_bytes < MAX_SLAVE_RX_PER_INT) {
val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET);
rx_status = (val >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK;
rx_data = ((val >> S_RX_DATA_SHIFT) & S_RX_DATA_MASK);
if (rx_status == I2C_SLAVE_RX_START) {
/* Start of SMBUS Master write */
i2c_slave_event(iproc_i2c->slave,
I2C_SLAVE_WRITE_REQUESTED, &rx_data);
iproc_i2c->rx_start_rcvd = true;
iproc_i2c->slave_read_complete = false;
} else if (rx_status == I2C_SLAVE_RX_DATA &&
iproc_i2c->rx_start_rcvd) {
/* Middle of SMBUS Master write */
i2c_slave_event(iproc_i2c->slave,
I2C_SLAVE_WRITE_RECEIVED, &rx_data);
} else if (rx_status == I2C_SLAVE_RX_END &&
iproc_i2c->rx_start_rcvd) {
/* End of SMBUS Master write */
if (iproc_i2c->slave_rx_only)
i2c_slave_event(iproc_i2c->slave,
I2C_SLAVE_WRITE_RECEIVED,
&rx_data);
i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP,
&rx_data);
} else if (rx_status == I2C_SLAVE_RX_FIFO_EMPTY) {
iproc_i2c->rx_start_rcvd = false;
iproc_i2c->slave_read_complete = true;
break;
}
rx_bytes++;
}
}
static void slave_rx_tasklet_fn(unsigned long data)
{
struct bcm_iproc_i2c_dev *iproc_i2c = (struct bcm_iproc_i2c_dev *)data;
u32 int_clr;
bcm_iproc_i2c_slave_read(iproc_i2c);
/* clear pending IS_S_RX_EVENT_SHIFT interrupt */
int_clr = BIT(IS_S_RX_EVENT_SHIFT);
if (!iproc_i2c->slave_rx_only && iproc_i2c->slave_read_complete) {
/*
* In case of single byte master-read request,
* IS_S_TX_UNDERRUN_SHIFT event is generated before
* IS_S_START_BUSY_SHIFT event. Hence start slave data send
* from first IS_S_TX_UNDERRUN_SHIFT event.
*
* This means don't send any data from slave when
* IS_S_RD_EVENT_SHIFT event is generated else it will increment
* eeprom or other backend slave driver read pointer twice.
*/
iproc_i2c->tx_underrun = 0;
iproc_i2c->slave_int_mask |= BIT(IE_S_TX_UNDERRUN_SHIFT);
/* clear IS_S_RD_EVENT_SHIFT interrupt */
int_clr |= BIT(IS_S_RD_EVENT_SHIFT);
}
/* clear slave interrupt */
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, int_clr);
/* enable slave interrupts */
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, iproc_i2c->slave_int_mask);
}
static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c,
u32 status)
{
u32 val;
u8 value;
/*
* Slave events in case of master-write, master-write-read and,
* master-read
*
* Master-write : only IS_S_RX_EVENT_SHIFT event
* Master-write-read: both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT
* events
* Master-read : both IS_S_RX_EVENT_SHIFT and IS_S_RD_EVENT_SHIFT
* events or only IS_S_RD_EVENT_SHIFT
*
* iproc has a slave rx fifo size of 64 bytes. Rx fifo full interrupt
* (IS_S_RX_FIFO_FULL_SHIFT) will be generated when RX fifo becomes
* full. This can happen if Master issues write requests of more than
* 64 bytes.
*/
if (status & BIT(IS_S_RX_EVENT_SHIFT) ||
status & BIT(IS_S_RD_EVENT_SHIFT) ||
status & BIT(IS_S_RX_FIFO_FULL_SHIFT)) {
/* disable slave interrupts */
val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
val &= ~iproc_i2c->slave_int_mask;
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
if (status & BIT(IS_S_RD_EVENT_SHIFT))
/* Master-write-read request */
iproc_i2c->slave_rx_only = false;
else
/* Master-write request only */
iproc_i2c->slave_rx_only = true;
/* schedule tasklet to read data later */
tasklet_schedule(&iproc_i2c->slave_rx_tasklet);
/*
* clear only IS_S_RX_EVENT_SHIFT and
* IS_S_RX_FIFO_FULL_SHIFT interrupt.
*/
val = BIT(IS_S_RX_EVENT_SHIFT);
if (status & BIT(IS_S_RX_FIFO_FULL_SHIFT))
val |= BIT(IS_S_RX_FIFO_FULL_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, val);
}
if (status & BIT(IS_S_TX_UNDERRUN_SHIFT)) {
iproc_i2c->tx_underrun++;
if (iproc_i2c->tx_underrun == 1)
/* Start of SMBUS for Master Read */
i2c_slave_event(iproc_i2c->slave,
I2C_SLAVE_READ_REQUESTED,
&value);
else
/* Master read other than start */
i2c_slave_event(iproc_i2c->slave,
I2C_SLAVE_READ_PROCESSED,
&value);
iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value);
/* start transfer */
val = BIT(S_CMD_START_BUSY_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val);
/* clear interrupt */
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET,
BIT(IS_S_TX_UNDERRUN_SHIFT));
}
/* Stop received from master in case of master read transaction */
if (status & BIT(IS_S_START_BUSY_SHIFT)) {
/*
* Disable interrupt for TX FIFO becomes empty and
* less than PKT_LENGTH bytes were output on the SMBUS
*/
iproc_i2c->slave_int_mask &= ~BIT(IE_S_TX_UNDERRUN_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET,
iproc_i2c->slave_int_mask);
/* End of SMBUS for Master Read */
val = BIT(S_TX_WR_STATUS_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, val);
val = BIT(S_CMD_START_BUSY_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val);
/* flush TX FIFOs */
val = iproc_i2c_rd_reg(iproc_i2c, S_FIFO_CTRL_OFFSET);
val |= (BIT(S_FIFO_TX_FLUSH_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val);
i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_STOP, &value);
/* clear interrupt */
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET,
BIT(IS_S_START_BUSY_SHIFT));
}
/* check slave transmit status only if slave is transmitting */
if (!iproc_i2c->slave_rx_only)
bcm_iproc_i2c_check_slave_status(iproc_i2c);
return true;
}
static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c)
{
struct i2c_msg *msg = iproc_i2c->msg;
uint32_t val;
/* Read valid data from RX FIFO */
while (iproc_i2c->rx_bytes < msg->len) {
val = iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET);
/* rx fifo empty */
if (!((val >> M_RX_STATUS_SHIFT) & M_RX_STATUS_MASK))
break;
msg->buf[iproc_i2c->rx_bytes] =
(val >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK;
iproc_i2c->rx_bytes++;
}
}
static void bcm_iproc_i2c_send(struct bcm_iproc_i2c_dev *iproc_i2c)
{
struct i2c_msg *msg = iproc_i2c->msg;
unsigned int tx_bytes = msg->len - iproc_i2c->tx_bytes;
unsigned int i;
u32 val;
/* can only fill up to the FIFO size */
tx_bytes = min_t(unsigned int, tx_bytes, M_TX_RX_FIFO_SIZE);
for (i = 0; i < tx_bytes; i++) {
/* start from where we left over */
unsigned int idx = iproc_i2c->tx_bytes + i;
val = msg->buf[idx];
/* mark the last byte */
if (idx == msg->len - 1) {
val |= BIT(M_TX_WR_STATUS_SHIFT);
if (iproc_i2c->irq) {
u32 tmp;
/*
* Since this is the last byte, we should now
* disable TX FIFO underrun interrupt
*/
tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET,
tmp);
}
}
/* load data into TX FIFO */
iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
}
/* update number of transferred bytes */
iproc_i2c->tx_bytes += tx_bytes;
}
static void bcm_iproc_i2c_read(struct bcm_iproc_i2c_dev *iproc_i2c)
{
struct i2c_msg *msg = iproc_i2c->msg;
u32 bytes_left, val;
bcm_iproc_i2c_read_valid_bytes(iproc_i2c);
bytes_left = msg->len - iproc_i2c->rx_bytes;
if (bytes_left == 0) {
if (iproc_i2c->irq) {
/* finished reading all data, disable rx thld event */
val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
val &= ~BIT(IS_M_RX_THLD_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
}
} else if (bytes_left < iproc_i2c->thld_bytes) {
/* set bytes left as threshold */
val = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET);
val &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT);
val |= (bytes_left << M_FIFO_RX_THLD_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
iproc_i2c->thld_bytes = bytes_left;
}
/*
* bytes_left >= iproc_i2c->thld_bytes,
* hence no need to change the THRESHOLD SET.
* It will remain as iproc_i2c->thld_bytes itself
*/
}
static void bcm_iproc_i2c_process_m_event(struct bcm_iproc_i2c_dev *iproc_i2c,
u32 status)
{
/* TX FIFO is empty and we have more data to send */
if (status & BIT(IS_M_TX_UNDERRUN_SHIFT))
bcm_iproc_i2c_send(iproc_i2c);
/* RX FIFO threshold is reached and data needs to be read out */
if (status & BIT(IS_M_RX_THLD_SHIFT))
bcm_iproc_i2c_read(iproc_i2c);
/* transfer is done */
if (status & BIT(IS_M_START_BUSY_SHIFT)) {
iproc_i2c->xfer_is_done = 1;
if (iproc_i2c->irq)
complete(&iproc_i2c->done);
}
}
static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data)
{
struct bcm_iproc_i2c_dev *iproc_i2c = data;
u32 slave_status;
u32 status;
bool ret;
status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET);
/* process only slave interrupt which are enabled */
slave_status = status & iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET) &
ISR_MASK_SLAVE;
if (slave_status) {
ret = bcm_iproc_i2c_slave_isr(iproc_i2c, slave_status);
if (ret)
return IRQ_HANDLED;
else
return IRQ_NONE;
}
status &= ISR_MASK;
if (!status)
return IRQ_NONE;
/* process all master based events */
bcm_iproc_i2c_process_m_event(iproc_i2c, status);
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status);
return IRQ_HANDLED;
}
static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c)
{
u32 val;
/* put controller in reset */
val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
val |= BIT(CFG_RESET_SHIFT);
val &= ~(BIT(CFG_EN_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
/* wait 100 usec per spec */
udelay(100);
/* bring controller out of reset */
val &= ~(BIT(CFG_RESET_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
/* flush TX/RX FIFOs and set RX FIFO threshold to zero */
val = (BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
/* disable all interrupts */
val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
val &= ~(IE_M_ALL_INTERRUPT_MASK <<
IE_M_ALL_INTERRUPT_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val);
/* clear all pending interrupts */
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff);
return 0;
}
static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
bool enable)
{
u32 val;
val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET);
if (enable)
val |= BIT(CFG_EN_SHIFT);
else
val &= ~BIT(CFG_EN_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val);
}
static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
struct i2c_msg *msg)
{
u32 val;
val = iproc_i2c_rd_reg(iproc_i2c, M_CMD_OFFSET);
val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK;
switch (val) {
case M_CMD_STATUS_SUCCESS:
return 0;
case M_CMD_STATUS_LOST_ARB:
dev_dbg(iproc_i2c->device, "lost bus arbitration\n");
return -EAGAIN;
case M_CMD_STATUS_NACK_ADDR:
dev_dbg(iproc_i2c->device, "NAK addr:0x%02x\n", msg->addr);
return -ENXIO;
case M_CMD_STATUS_NACK_DATA:
dev_dbg(iproc_i2c->device, "NAK data\n");
return -ENXIO;
case M_CMD_STATUS_TIMEOUT:
dev_dbg(iproc_i2c->device, "bus timeout\n");
return -ETIMEDOUT;
case M_CMD_STATUS_FIFO_UNDERRUN:
dev_dbg(iproc_i2c->device, "FIFO under-run\n");
return -ENXIO;
case M_CMD_STATUS_RX_FIFO_FULL:
dev_dbg(iproc_i2c->device, "RX FIFO full\n");
return -ETIMEDOUT;
default:
dev_dbg(iproc_i2c->device, "unknown error code=%d\n", val);
/* re-initialize i2c for recovery */
bcm_iproc_i2c_enable_disable(iproc_i2c, false);
bcm_iproc_i2c_init(iproc_i2c);
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
return -EIO;
}
}
static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c,
struct i2c_msg *msg,
u32 cmd)
{
unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT_MSEC);
u32 val, status;
int ret;
iproc_i2c_wr_reg(iproc_i2c, M_CMD_OFFSET, cmd);
if (iproc_i2c->irq) {
time_left = wait_for_completion_timeout(&iproc_i2c->done,
time_left);
/* disable all interrupts */
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0);
/* read it back to flush the write */
iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
/* make sure the interrupt handler isn't running */
synchronize_irq(iproc_i2c->irq);
} else { /* polling mode */
unsigned long timeout = jiffies + time_left;
do {
status = iproc_i2c_rd_reg(iproc_i2c,
IS_OFFSET) & ISR_MASK;
bcm_iproc_i2c_process_m_event(iproc_i2c, status);
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status);
if (time_after(jiffies, timeout)) {
time_left = 0;
break;
}
cpu_relax();
cond_resched();
} while (!iproc_i2c->xfer_is_done);
}
if (!time_left && !iproc_i2c->xfer_is_done) {
dev_err(iproc_i2c->device, "transaction timed out\n");
/* flush both TX/RX FIFOs */
val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
return -ETIMEDOUT;
}
ret = bcm_iproc_i2c_check_status(iproc_i2c, msg);
if (ret) {
/* flush both TX/RX FIFOs */
val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val);
return ret;
}
return 0;
}
/*
* If 'process_call' is true, then this is a multi-msg transfer that requires
* a repeated start between the messages.
* More specifically, it must be a write (reg) followed by a read (data).
* The i2c quirks are set to enforce this rule.
*/
static int bcm_iproc_i2c_xfer_internal(struct bcm_iproc_i2c_dev *iproc_i2c,
struct i2c_msg *msgs, bool process_call)
{
int i;
u8 addr;
u32 val, tmp, val_intr_en;
unsigned int tx_bytes;
struct i2c_msg *msg = &msgs[0];
/* check if bus is busy */
if (!!(iproc_i2c_rd_reg(iproc_i2c,
M_CMD_OFFSET) & BIT(M_CMD_START_BUSY_SHIFT))) {
dev_warn(iproc_i2c->device, "bus is busy\n");
return -EBUSY;
}
iproc_i2c->msg = msg;
/* format and load slave address into the TX FIFO */
addr = i2c_8bit_addr_from_msg(msg);
iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, addr);
/*
* For a write transaction, load data into the TX FIFO. Only allow
* loading up to TX FIFO size - 1 bytes of data since the first byte
* has been used up by the slave address
*/
tx_bytes = min_t(unsigned int, msg->len, M_TX_RX_FIFO_SIZE - 1);
if (!(msg->flags & I2C_M_RD)) {
for (i = 0; i < tx_bytes; i++) {
val = msg->buf[i];
/* mark the last byte */
if (!process_call && (i == msg->len - 1))
val |= BIT(M_TX_WR_STATUS_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
}
iproc_i2c->tx_bytes = tx_bytes;
}
/* Process the read message if this is process call */
if (process_call) {
msg++;
iproc_i2c->msg = msg; /* point to second msg */
/*
* The last byte to be sent out should be a slave
* address with read operation
*/
addr = i2c_8bit_addr_from_msg(msg);
/* mark it the last byte out */
val = addr | BIT(M_TX_WR_STATUS_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val);
}
/* mark as incomplete before starting the transaction */
if (iproc_i2c->irq)
reinit_completion(&iproc_i2c->done);
iproc_i2c->xfer_is_done = 0;
/*
* Enable the "start busy" interrupt, which will be triggered after the
* transaction is done, i.e., the internal start_busy bit, transitions
* from 1 to 0.
*/
val_intr_en = BIT(IE_M_START_BUSY_SHIFT);
/*
* If TX data size is larger than the TX FIFO, need to enable TX
* underrun interrupt, which will be triggerred when the TX FIFO is
* empty. When that happens we can then pump more data into the FIFO
*/
if (!process_call && !(msg->flags & I2C_M_RD) &&
msg->len > iproc_i2c->tx_bytes)
val_intr_en |= BIT(IE_M_TX_UNDERRUN_SHIFT);
/*
* Now we can activate the transfer. For a read operation, specify the
* number of bytes to read
*/
val = BIT(M_CMD_START_BUSY_SHIFT);
if (msg->len == 0) {
/* SMBUS QUICK Command (Read/Write) */
val |= (M_CMD_PROTOCOL_QUICK << M_CMD_PROTOCOL_SHIFT);
} else if (msg->flags & I2C_M_RD) {
u32 protocol;
iproc_i2c->rx_bytes = 0;
if (msg->len > M_RX_FIFO_MAX_THLD_VALUE)
iproc_i2c->thld_bytes = M_RX_FIFO_THLD_VALUE;
else
iproc_i2c->thld_bytes = msg->len;
/* set threshold value */
tmp = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET);
tmp &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT);
tmp |= iproc_i2c->thld_bytes << M_FIFO_RX_THLD_SHIFT;
iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, tmp);
/* enable the RX threshold interrupt */
val_intr_en |= BIT(IE_M_RX_THLD_SHIFT);
protocol = process_call ?
M_CMD_PROTOCOL_PROCESS : M_CMD_PROTOCOL_BLK_RD;
val |= (protocol << M_CMD_PROTOCOL_SHIFT) |
(msg->len << M_CMD_RD_CNT_SHIFT);
} else {
val |= (M_CMD_PROTOCOL_BLK_WR << M_CMD_PROTOCOL_SHIFT);
}
if (iproc_i2c->irq)
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val_intr_en);
return bcm_iproc_i2c_xfer_wait(iproc_i2c, msg, val);
}
static int bcm_iproc_i2c_xfer(struct i2c_adapter *adapter,
struct i2c_msg msgs[], int num)
{
struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adapter);
bool process_call = false;
int ret;
if (num == 2) {
/* Repeated start, use process call */
process_call = true;
if (msgs[1].flags & I2C_M_NOSTART) {
dev_err(iproc_i2c->device, "Invalid repeated start\n");
return -EOPNOTSUPP;
}
}
ret = bcm_iproc_i2c_xfer_internal(iproc_i2c, msgs, process_call);
if (ret) {
dev_dbg(iproc_i2c->device, "xfer failed\n");
return ret;
}
return num;
}
static uint32_t bcm_iproc_i2c_functionality(struct i2c_adapter *adap)
{
u32 val;
val = I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
if (adap->algo->reg_slave)
val |= I2C_FUNC_SLAVE;
return val;
}
static struct i2c_algorithm bcm_iproc_algo = {
.master_xfer = bcm_iproc_i2c_xfer,
.functionality = bcm_iproc_i2c_functionality,
.reg_slave = bcm_iproc_i2c_reg_slave,
.unreg_slave = bcm_iproc_i2c_unreg_slave,
};
static const struct i2c_adapter_quirks bcm_iproc_i2c_quirks = {
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
.max_comb_1st_msg_len = M_TX_RX_FIFO_SIZE,
.max_read_len = M_RX_MAX_READ_LEN,
};
static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c)
{
unsigned int bus_speed;
u32 val;
int ret = of_property_read_u32(iproc_i2c->device->of_node,
"clock-frequency", &bus_speed);
if (ret < 0) {
dev_info(iproc_i2c->device,
"unable to interpret clock-frequency DT property\n");
bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
}
if (bus_speed < I2C_MAX_STANDARD_MODE_FREQ) {
dev_err(iproc_i2c->device, "%d Hz bus speed not supported\n",
bus_speed);
dev_err(iproc_i2c->device,
"valid speeds are 100khz and 400khz\n");
return -EINVAL;
} else if (bus_speed < I2C_MAX_FAST_MODE_FREQ) {
bus_speed = I2C_MAX_STANDARD_MODE_FREQ;
} else {
bus_speed = I2C_MAX_FAST_MODE_FREQ;
}
iproc_i2c->bus_speed = bus_speed;
val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
val |= (bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed);
return 0;
}
static int bcm_iproc_i2c_probe(struct platform_device *pdev)
{
int irq, ret = 0;
struct bcm_iproc_i2c_dev *iproc_i2c;
struct i2c_adapter *adap;
struct resource *res;
iproc_i2c = devm_kzalloc(&pdev->dev, sizeof(*iproc_i2c),
GFP_KERNEL);
if (!iproc_i2c)
return -ENOMEM;
platform_set_drvdata(pdev, iproc_i2c);
iproc_i2c->device = &pdev->dev;
iproc_i2c->type =
(enum bcm_iproc_i2c_type)of_device_get_match_data(&pdev->dev);
init_completion(&iproc_i2c->done);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
iproc_i2c->base = devm_ioremap_resource(iproc_i2c->device, res);
if (IS_ERR(iproc_i2c->base))
return PTR_ERR(iproc_i2c->base);
if (iproc_i2c->type == IPROC_I2C_NIC) {
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
iproc_i2c->idm_base = devm_ioremap_resource(iproc_i2c->device,
res);
if (IS_ERR(iproc_i2c->idm_base))
return PTR_ERR(iproc_i2c->idm_base);
ret = of_property_read_u32(iproc_i2c->device->of_node,
"brcm,ape-hsls-addr-mask",
&iproc_i2c->ape_addr_mask);
if (ret < 0) {
dev_err(iproc_i2c->device,
"'brcm,ape-hsls-addr-mask' missing\n");
return -EINVAL;
}
spin_lock_init(&iproc_i2c->idm_lock);
/* no slave support */
bcm_iproc_algo.reg_slave = NULL;
bcm_iproc_algo.unreg_slave = NULL;
}
ret = bcm_iproc_i2c_init(iproc_i2c);
if (ret)
return ret;
ret = bcm_iproc_i2c_cfg_speed(iproc_i2c);
if (ret)
return ret;
irq = platform_get_irq(pdev, 0);
if (irq > 0) {
ret = devm_request_irq(iproc_i2c->device, irq,
bcm_iproc_i2c_isr, 0, pdev->name,
iproc_i2c);
if (ret < 0) {
dev_err(iproc_i2c->device,
"unable to request irq %i\n", irq);
return ret;
}
iproc_i2c->irq = irq;
} else {
dev_warn(iproc_i2c->device,
"no irq resource, falling back to poll mode\n");
}
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
adap = &iproc_i2c->adapter;
i2c_set_adapdata(adap, iproc_i2c);
snprintf(adap->name, sizeof(adap->name),
"Broadcom iProc (%s)",
of_node_full_name(iproc_i2c->device->of_node));
adap->algo = &bcm_iproc_algo;
adap->quirks = &bcm_iproc_i2c_quirks;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
return i2c_add_adapter(adap);
}
static void bcm_iproc_i2c_remove(struct platform_device *pdev)
{
struct bcm_iproc_i2c_dev *iproc_i2c = platform_get_drvdata(pdev);
if (iproc_i2c->irq) {
/*
* Make sure there's no pending interrupt when we remove the
* adapter
*/
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0);
iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
synchronize_irq(iproc_i2c->irq);
}
i2c_del_adapter(&iproc_i2c->adapter);
bcm_iproc_i2c_enable_disable(iproc_i2c, false);
}
static int bcm_iproc_i2c_suspend(struct device *dev)
{
struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
if (iproc_i2c->irq) {
/*
* Make sure there's no pending interrupt when we go into
* suspend
*/
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0);
iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
synchronize_irq(iproc_i2c->irq);
}
/* now disable the controller */
bcm_iproc_i2c_enable_disable(iproc_i2c, false);
return 0;
}
static int bcm_iproc_i2c_resume(struct device *dev)
{
struct bcm_iproc_i2c_dev *iproc_i2c = dev_get_drvdata(dev);
int ret;
u32 val;
/*
* Power domain could have been shut off completely in system deep
* sleep, so re-initialize the block here
*/
ret = bcm_iproc_i2c_init(iproc_i2c);
if (ret)
return ret;
/* configure to the desired bus speed */
val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET);
val &= ~BIT(TIM_CFG_MODE_400_SHIFT);
val |= (iproc_i2c->bus_speed == I2C_MAX_FAST_MODE_FREQ) << TIM_CFG_MODE_400_SHIFT;
iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val);
bcm_iproc_i2c_enable_disable(iproc_i2c, true);
return 0;
}
static const struct dev_pm_ops bcm_iproc_i2c_pm_ops = {
.suspend_late = &bcm_iproc_i2c_suspend,
.resume_early = &bcm_iproc_i2c_resume
};
static int bcm_iproc_i2c_reg_slave(struct i2c_client *slave)
{
struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
if (iproc_i2c->slave)
return -EBUSY;
if (slave->flags & I2C_CLIENT_TEN)
return -EAFNOSUPPORT;
iproc_i2c->slave = slave;
tasklet_init(&iproc_i2c->slave_rx_tasklet, slave_rx_tasklet_fn,
(unsigned long)iproc_i2c);
bcm_iproc_i2c_slave_init(iproc_i2c, false);
return 0;
}
static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave)
{
u32 tmp;
struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(slave->adapter);
if (!iproc_i2c->slave)
return -EINVAL;
disable_irq(iproc_i2c->irq);
tasklet_kill(&iproc_i2c->slave_rx_tasklet);
/* disable all slave interrupts */
tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET);
tmp &= ~(IE_S_ALL_INTERRUPT_MASK <<
IE_S_ALL_INTERRUPT_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp);
/* Erase the slave address programmed */
tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET);
tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT);
iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp);
/* flush TX/RX FIFOs */
tmp = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT));
iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, tmp);
/* clear all pending slave interrupts */
iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE);
iproc_i2c->slave = NULL;
enable_irq(iproc_i2c->irq);
return 0;
}
static const struct of_device_id bcm_iproc_i2c_of_match[] = {
{
.compatible = "brcm,iproc-i2c",
.data = (int *)IPROC_I2C,
}, {
.compatible = "brcm,iproc-nic-i2c",
.data = (int *)IPROC_I2C_NIC,
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, bcm_iproc_i2c_of_match);
static struct platform_driver bcm_iproc_i2c_driver = {
.driver = {
.name = "bcm-iproc-i2c",
.of_match_table = bcm_iproc_i2c_of_match,
.pm = pm_sleep_ptr(&bcm_iproc_i2c_pm_ops),
},
.probe = bcm_iproc_i2c_probe,
.remove_new = bcm_iproc_i2c_remove,
};
module_platform_driver(bcm_iproc_i2c_driver);
MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
MODULE_DESCRIPTION("Broadcom iProc I2C Driver");
MODULE_LICENSE("GPL v2");
|