1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
|
// SPDX-License-Identifier: GPL-2.0-or-later
/* linux/drivers/i2c/busses/i2c-s3c2410.c
*
* Copyright (C) 2004,2005,2009 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 I2C Controller
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/time.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/gpio/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <asm/irq.h>
#include <linux/platform_data/i2c-s3c2410.h>
/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
#define S3C2410_IICCON 0x00
#define S3C2410_IICSTAT 0x04
#define S3C2410_IICADD 0x08
#define S3C2410_IICDS 0x0C
#define S3C2440_IICLC 0x10
#define S3C2410_IICCON_ACKEN (1 << 7)
#define S3C2410_IICCON_TXDIV_16 (0 << 6)
#define S3C2410_IICCON_TXDIV_512 (1 << 6)
#define S3C2410_IICCON_IRQEN (1 << 5)
#define S3C2410_IICCON_IRQPEND (1 << 4)
#define S3C2410_IICCON_SCALE(x) ((x) & 0xf)
#define S3C2410_IICCON_SCALEMASK (0xf)
#define S3C2410_IICSTAT_MASTER_RX (2 << 6)
#define S3C2410_IICSTAT_MASTER_TX (3 << 6)
#define S3C2410_IICSTAT_SLAVE_RX (0 << 6)
#define S3C2410_IICSTAT_SLAVE_TX (1 << 6)
#define S3C2410_IICSTAT_MODEMASK (3 << 6)
#define S3C2410_IICSTAT_START (1 << 5)
#define S3C2410_IICSTAT_BUSBUSY (1 << 5)
#define S3C2410_IICSTAT_TXRXEN (1 << 4)
#define S3C2410_IICSTAT_ARBITR (1 << 3)
#define S3C2410_IICSTAT_ASSLAVE (1 << 2)
#define S3C2410_IICSTAT_ADDR0 (1 << 1)
#define S3C2410_IICSTAT_LASTBIT (1 << 0)
#define S3C2410_IICLC_SDA_DELAY0 (0 << 0)
#define S3C2410_IICLC_SDA_DELAY5 (1 << 0)
#define S3C2410_IICLC_SDA_DELAY10 (2 << 0)
#define S3C2410_IICLC_SDA_DELAY15 (3 << 0)
#define S3C2410_IICLC_SDA_DELAY_MASK (3 << 0)
#define S3C2410_IICLC_FILTER_ON (1 << 2)
/* Treat S3C2410 as baseline hardware, anything else is supported via quirks */
#define QUIRK_S3C2440 (1 << 0)
#define QUIRK_HDMIPHY (1 << 1)
#define QUIRK_NO_GPIO (1 << 2)
#define QUIRK_POLL (1 << 3)
/* Max time to wait for bus to become idle after a xfer (in us) */
#define S3C2410_IDLE_TIMEOUT 5000
/* Exynos5 Sysreg offset */
#define EXYNOS5_SYS_I2C_CFG 0x0234
/* i2c controller state */
enum s3c24xx_i2c_state {
STATE_IDLE,
STATE_START,
STATE_READ,
STATE_WRITE,
STATE_STOP
};
struct s3c24xx_i2c {
wait_queue_head_t wait;
kernel_ulong_t quirks;
struct i2c_msg *msg;
unsigned int msg_num;
unsigned int msg_idx;
unsigned int msg_ptr;
unsigned int tx_setup;
unsigned int irq;
enum s3c24xx_i2c_state state;
unsigned long clkrate;
void __iomem *regs;
struct clk *clk;
struct device *dev;
struct i2c_adapter adap;
struct s3c2410_platform_i2c *pdata;
struct gpio_desc *gpios[2];
struct pinctrl *pctrl;
struct regmap *sysreg;
unsigned int sys_i2c_cfg;
};
static const struct platform_device_id s3c24xx_driver_ids[] = {
{
.name = "s3c2410-i2c",
.driver_data = 0,
}, {
.name = "s3c2440-i2c",
.driver_data = QUIRK_S3C2440,
}, {
.name = "s3c2440-hdmiphy-i2c",
.driver_data = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO,
}, { },
};
MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat);
#ifdef CONFIG_OF
static const struct of_device_id s3c24xx_i2c_match[] = {
{ .compatible = "samsung,s3c2410-i2c", .data = (void *)0 },
{ .compatible = "samsung,s3c2440-i2c", .data = (void *)QUIRK_S3C2440 },
{ .compatible = "samsung,s3c2440-hdmiphy-i2c",
.data = (void *)(QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO) },
{ .compatible = "samsung,exynos5-sata-phy-i2c",
.data = (void *)(QUIRK_S3C2440 | QUIRK_POLL | QUIRK_NO_GPIO) },
{},
};
MODULE_DEVICE_TABLE(of, s3c24xx_i2c_match);
#endif
/*
* Get controller type either from device tree or platform device variant.
*/
static inline kernel_ulong_t s3c24xx_get_device_quirks(struct platform_device *pdev)
{
if (pdev->dev.of_node)
return (kernel_ulong_t)of_device_get_match_data(&pdev->dev);
return platform_get_device_id(pdev)->driver_data;
}
/*
* Complete the message and wake up the caller, using the given return code,
* or zero to mean ok.
*/
static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret)
{
dev_dbg(i2c->dev, "master_complete %d\n", ret);
i2c->msg_ptr = 0;
i2c->msg = NULL;
i2c->msg_idx++;
i2c->msg_num = 0;
if (ret)
i2c->msg_idx = ret;
if (!(i2c->quirks & QUIRK_POLL))
wake_up(&i2c->wait);
}
static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
}
static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON);
}
/* irq enable/disable functions */
static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
}
static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
tmp = readl(i2c->regs + S3C2410_IICCON);
writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON);
}
static bool is_ack(struct s3c24xx_i2c *i2c)
{
int tries;
for (tries = 50; tries; --tries) {
unsigned long tmp = readl(i2c->regs + S3C2410_IICCON);
if (!(tmp & S3C2410_IICCON_ACKEN)) {
/*
* Wait a bit for the bus to stabilize,
* delay estimated experimentally.
*/
usleep_range(100, 200);
return true;
}
if (tmp & S3C2410_IICCON_IRQPEND) {
if (!(readl(i2c->regs + S3C2410_IICSTAT)
& S3C2410_IICSTAT_LASTBIT))
return true;
}
usleep_range(1000, 2000);
}
dev_err(i2c->dev, "ack was not received\n");
return false;
}
/*
* put the start of a message onto the bus
*/
static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c,
struct i2c_msg *msg)
{
unsigned int addr = (msg->addr & 0x7f) << 1;
unsigned long stat;
unsigned long iiccon;
stat = 0;
stat |= S3C2410_IICSTAT_TXRXEN;
if (msg->flags & I2C_M_RD) {
stat |= S3C2410_IICSTAT_MASTER_RX;
addr |= 1;
} else
stat |= S3C2410_IICSTAT_MASTER_TX;
if (msg->flags & I2C_M_REV_DIR_ADDR)
addr ^= 1;
/* todo - check for whether ack wanted or not */
s3c24xx_i2c_enable_ack(i2c);
iiccon = readl(i2c->regs + S3C2410_IICCON);
writel(stat, i2c->regs + S3C2410_IICSTAT);
dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr);
writeb(addr, i2c->regs + S3C2410_IICDS);
/*
* delay here to ensure the data byte has gotten onto the bus
* before the transaction is started
*/
ndelay(i2c->tx_setup);
dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon);
writel(iiccon, i2c->regs + S3C2410_IICCON);
stat |= S3C2410_IICSTAT_START;
writel(stat, i2c->regs + S3C2410_IICSTAT);
if (i2c->quirks & QUIRK_POLL) {
while ((i2c->msg_num != 0) && is_ack(i2c)) {
i2c_s3c_irq_nextbyte(i2c, stat);
stat = readl(i2c->regs + S3C2410_IICSTAT);
if (stat & S3C2410_IICSTAT_ARBITR)
dev_err(i2c->dev, "deal with arbitration loss\n");
}
}
}
static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret)
{
unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT);
dev_dbg(i2c->dev, "STOP\n");
/*
* The datasheet says that the STOP sequence should be:
* 1) I2CSTAT.5 = 0 - Clear BUSY (or 'generate STOP')
* 2) I2CCON.4 = 0 - Clear IRQPEND
* 3) Wait until the stop condition takes effect.
* 4*) I2CSTAT.4 = 0 - Clear TXRXEN
*
* Where, step "4*" is only for buses with the "HDMIPHY" quirk.
*
* However, after much experimentation, it appears that:
* a) normal buses automatically clear BUSY and transition from
* Master->Slave when they complete generating a STOP condition.
* Therefore, step (3) can be done in doxfer() by polling I2CCON.4
* after starting the STOP generation here.
* b) HDMIPHY bus does neither, so there is no way to do step 3.
* There is no indication when this bus has finished generating
* STOP.
*
* In fact, we have found that as soon as the IRQPEND bit is cleared in
* step 2, the HDMIPHY bus generates the STOP condition, and then
* immediately starts transferring another data byte, even though the
* bus is supposedly stopped. This is presumably because the bus is
* still in "Master" mode, and its BUSY bit is still set.
*
* To avoid these extra post-STOP transactions on HDMI phy devices, we
* just disable Serial Output on the bus (I2CSTAT.4 = 0) directly,
* instead of first generating a proper STOP condition. This should
* float SDA & SCK terminating the transfer. Subsequent transfers
* start with a proper START condition, and proceed normally.
*
* The HDMIPHY bus is an internal bus that always has exactly two
* devices, the host as Master and the HDMIPHY device as the slave.
* Skipping the STOP condition has been tested on this bus and works.
*/
if (i2c->quirks & QUIRK_HDMIPHY) {
/* Stop driving the I2C pins */
iicstat &= ~S3C2410_IICSTAT_TXRXEN;
} else {
/* stop the transfer */
iicstat &= ~S3C2410_IICSTAT_START;
}
writel(iicstat, i2c->regs + S3C2410_IICSTAT);
i2c->state = STATE_STOP;
s3c24xx_i2c_master_complete(i2c, ret);
s3c24xx_i2c_disable_irq(i2c);
}
/*
* helper functions to determine the current state in the set of
* messages we are sending
*/
/*
* returns TRUE if the current message is the last in the set
*/
static inline int is_lastmsg(struct s3c24xx_i2c *i2c)
{
return i2c->msg_idx >= (i2c->msg_num - 1);
}
/*
* returns TRUE if we this is the last byte in the current message
*/
static inline int is_msglast(struct s3c24xx_i2c *i2c)
{
/*
* msg->len is always 1 for the first byte of smbus block read.
* Actual length will be read from slave. More bytes will be
* read according to the length then.
*/
if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
return 0;
return i2c->msg_ptr == i2c->msg->len-1;
}
/*
* returns TRUE if we reached the end of the current message
*/
static inline int is_msgend(struct s3c24xx_i2c *i2c)
{
return i2c->msg_ptr >= i2c->msg->len;
}
/*
* process an interrupt and work out what to do
*/
static void i2c_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat)
{
unsigned long tmp;
unsigned char byte;
switch (i2c->state) {
case STATE_IDLE:
dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __func__);
goto out;
case STATE_STOP:
dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__);
s3c24xx_i2c_disable_irq(i2c);
goto out_ack;
case STATE_START:
/*
* last thing we did was send a start condition on the
* bus, or started a new i2c message
*/
if (iicstat & S3C2410_IICSTAT_LASTBIT &&
!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
/* ack was not received... */
dev_dbg(i2c->dev, "ack was not received\n");
s3c24xx_i2c_stop(i2c, -ENXIO);
goto out_ack;
}
if (i2c->msg->flags & I2C_M_RD)
i2c->state = STATE_READ;
else
i2c->state = STATE_WRITE;
/*
* Terminate the transfer if there is nothing to do
* as this is used by the i2c probe to find devices.
*/
if (is_lastmsg(i2c) && i2c->msg->len == 0) {
s3c24xx_i2c_stop(i2c, 0);
goto out_ack;
}
if (i2c->state == STATE_READ)
goto prepare_read;
/*
* fall through to the write state, as we will need to
* send a byte as well
*/
fallthrough;
case STATE_WRITE:
/*
* we are writing data to the device... check for the
* end of the message, and if so, work out what to do
*/
if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) {
if (iicstat & S3C2410_IICSTAT_LASTBIT) {
dev_dbg(i2c->dev, "WRITE: No Ack\n");
s3c24xx_i2c_stop(i2c, -ECONNREFUSED);
goto out_ack;
}
}
retry_write:
if (!is_msgend(i2c)) {
byte = i2c->msg->buf[i2c->msg_ptr++];
writeb(byte, i2c->regs + S3C2410_IICDS);
/*
* delay after writing the byte to allow the
* data setup time on the bus, as writing the
* data to the register causes the first bit
* to appear on SDA, and SCL will change as
* soon as the interrupt is acknowledged
*/
ndelay(i2c->tx_setup);
} else if (!is_lastmsg(i2c)) {
/* we need to go to the next i2c message */
dev_dbg(i2c->dev, "WRITE: Next Message\n");
i2c->msg_ptr = 0;
i2c->msg_idx++;
i2c->msg++;
/* check to see if we need to do another message */
if (i2c->msg->flags & I2C_M_NOSTART) {
if (i2c->msg->flags & I2C_M_RD) {
/*
* cannot do this, the controller
* forces us to send a new START
* when we change direction
*/
dev_dbg(i2c->dev,
"missing START before write->read\n");
s3c24xx_i2c_stop(i2c, -EINVAL);
break;
}
goto retry_write;
} else {
/* send the new start */
s3c24xx_i2c_message_start(i2c, i2c->msg);
i2c->state = STATE_START;
}
} else {
/* send stop */
s3c24xx_i2c_stop(i2c, 0);
}
break;
case STATE_READ:
/*
* we have a byte of data in the data register, do
* something with it, and then work out whether we are
* going to do any more read/write
*/
byte = readb(i2c->regs + S3C2410_IICDS);
i2c->msg->buf[i2c->msg_ptr++] = byte;
/* Add actual length to read for smbus block read */
if (i2c->msg->flags & I2C_M_RECV_LEN && i2c->msg->len == 1)
i2c->msg->len += byte;
prepare_read:
if (is_msglast(i2c)) {
/* last byte of buffer */
if (is_lastmsg(i2c))
s3c24xx_i2c_disable_ack(i2c);
} else if (is_msgend(i2c)) {
/*
* ok, we've read the entire buffer, see if there
* is anything else we need to do
*/
if (is_lastmsg(i2c)) {
/* last message, send stop and complete */
dev_dbg(i2c->dev, "READ: Send Stop\n");
s3c24xx_i2c_stop(i2c, 0);
} else {
/* go to the next transfer */
dev_dbg(i2c->dev, "READ: Next Transfer\n");
i2c->msg_ptr = 0;
i2c->msg_idx++;
i2c->msg++;
}
}
break;
}
/* acknowlegde the IRQ and get back on with the work */
out_ack:
tmp = readl(i2c->regs + S3C2410_IICCON);
tmp &= ~S3C2410_IICCON_IRQPEND;
writel(tmp, i2c->regs + S3C2410_IICCON);
out:
return;
}
/*
* top level IRQ servicing routine
*/
static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id)
{
struct s3c24xx_i2c *i2c = dev_id;
unsigned long status;
unsigned long tmp;
status = readl(i2c->regs + S3C2410_IICSTAT);
if (status & S3C2410_IICSTAT_ARBITR) {
/* deal with arbitration loss */
dev_err(i2c->dev, "deal with arbitration loss\n");
}
if (i2c->state == STATE_IDLE) {
dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n");
tmp = readl(i2c->regs + S3C2410_IICCON);
tmp &= ~S3C2410_IICCON_IRQPEND;
writel(tmp, i2c->regs + S3C2410_IICCON);
goto out;
}
/*
* pretty much this leaves us with the fact that we've
* transmitted or received whatever byte we last sent
*/
i2c_s3c_irq_nextbyte(i2c, status);
out:
return IRQ_HANDLED;
}
/*
* Disable the bus so that we won't get any interrupts from now on, or try
* to drive any lines. This is the default state when we don't have
* anything to send/receive.
*
* If there is an event on the bus, or we have a pre-existing event at
* kernel boot time, we may not notice the event and the I2C controller
* will lock the bus with the I2C clock line low indefinitely.
*/
static inline void s3c24xx_i2c_disable_bus(struct s3c24xx_i2c *i2c)
{
unsigned long tmp;
/* Stop driving the I2C pins */
tmp = readl(i2c->regs + S3C2410_IICSTAT);
tmp &= ~S3C2410_IICSTAT_TXRXEN;
writel(tmp, i2c->regs + S3C2410_IICSTAT);
/* We don't expect any interrupts now, and don't want send acks */
tmp = readl(i2c->regs + S3C2410_IICCON);
tmp &= ~(S3C2410_IICCON_IRQEN | S3C2410_IICCON_IRQPEND |
S3C2410_IICCON_ACKEN);
writel(tmp, i2c->regs + S3C2410_IICCON);
}
/*
* get the i2c bus for a master transaction
*/
static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c)
{
unsigned long iicstat;
int timeout = 400;
while (timeout-- > 0) {
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
if (!(iicstat & S3C2410_IICSTAT_BUSBUSY))
return 0;
msleep(1);
}
return -ETIMEDOUT;
}
/*
* wait for the i2c bus to become idle.
*/
static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c)
{
unsigned long iicstat;
ktime_t start, now;
unsigned long delay;
int spins;
/* ensure the stop has been through the bus */
dev_dbg(i2c->dev, "waiting for bus idle\n");
start = now = ktime_get();
/*
* Most of the time, the bus is already idle within a few usec of the
* end of a transaction. However, really slow i2c devices can stretch
* the clock, delaying STOP generation.
*
* On slower SoCs this typically happens within a very small number of
* instructions so busy wait briefly to avoid scheduling overhead.
*/
spins = 3;
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
while ((iicstat & S3C2410_IICSTAT_START) && --spins) {
cpu_relax();
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
}
/*
* If we do get an appreciable delay as a compromise between idle
* detection latency for the normal, fast case, and system load in the
* slow device case, use an exponential back off in the polling loop,
* up to 1/10th of the total timeout, then continue to poll at a
* constant rate up to the timeout.
*/
delay = 1;
while ((iicstat & S3C2410_IICSTAT_START) &&
ktime_us_delta(now, start) < S3C2410_IDLE_TIMEOUT) {
usleep_range(delay, 2 * delay);
if (delay < S3C2410_IDLE_TIMEOUT / 10)
delay <<= 1;
now = ktime_get();
iicstat = readl(i2c->regs + S3C2410_IICSTAT);
}
if (iicstat & S3C2410_IICSTAT_START)
dev_warn(i2c->dev, "timeout waiting for bus idle\n");
}
/*
* this starts an i2c transfer
*/
static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
struct i2c_msg *msgs, int num)
{
unsigned long timeout;
int ret;
ret = s3c24xx_i2c_set_master(i2c);
if (ret != 0) {
dev_err(i2c->dev, "cannot get bus (error %d)\n", ret);
ret = -EAGAIN;
goto out;
}
i2c->msg = msgs;
i2c->msg_num = num;
i2c->msg_ptr = 0;
i2c->msg_idx = 0;
i2c->state = STATE_START;
s3c24xx_i2c_enable_irq(i2c);
s3c24xx_i2c_message_start(i2c, msgs);
if (i2c->quirks & QUIRK_POLL) {
ret = i2c->msg_idx;
if (ret != num)
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
goto out;
}
timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5);
ret = i2c->msg_idx;
/*
* Having these next two as dev_err() makes life very
* noisy when doing an i2cdetect
*/
if (timeout == 0)
dev_dbg(i2c->dev, "timeout\n");
else if (ret != num)
dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret);
/* For QUIRK_HDMIPHY, bus is already disabled */
if (i2c->quirks & QUIRK_HDMIPHY)
goto out;
s3c24xx_i2c_wait_idle(i2c);
s3c24xx_i2c_disable_bus(i2c);
out:
i2c->state = STATE_IDLE;
return ret;
}
/*
* first port of call from the i2c bus code when an message needs
* transferring across the i2c bus.
*/
static int s3c24xx_i2c_xfer(struct i2c_adapter *adap,
struct i2c_msg *msgs, int num)
{
struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data;
int retry;
int ret;
ret = clk_enable(i2c->clk);
if (ret)
return ret;
for (retry = 0; retry < adap->retries; retry++) {
ret = s3c24xx_i2c_doxfer(i2c, msgs, num);
if (ret != -EAGAIN) {
clk_disable(i2c->clk);
return ret;
}
dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry);
udelay(100);
}
clk_disable(i2c->clk);
return -EREMOTEIO;
}
/* declare our i2c functionality */
static u32 s3c24xx_i2c_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL_ALL | I2C_FUNC_NOSTART |
I2C_FUNC_PROTOCOL_MANGLING;
}
/* i2c bus registration info */
static const struct i2c_algorithm s3c24xx_i2c_algorithm = {
.master_xfer = s3c24xx_i2c_xfer,
.functionality = s3c24xx_i2c_func,
};
/*
* return the divisor settings for a given frequency
*/
static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted,
unsigned int *div1, unsigned int *divs)
{
unsigned int calc_divs = clkin / wanted;
unsigned int calc_div1;
if (calc_divs > (16*16))
calc_div1 = 512;
else
calc_div1 = 16;
calc_divs += calc_div1-1;
calc_divs /= calc_div1;
if (calc_divs == 0)
calc_divs = 1;
if (calc_divs > 17)
calc_divs = 17;
*divs = calc_divs;
*div1 = calc_div1;
return clkin / (calc_divs * calc_div1);
}
/*
* work out a divisor for the user requested frequency setting,
* either by the requested frequency, or scanning the acceptable
* range of frequencies until something is found
*/
static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got)
{
struct s3c2410_platform_i2c *pdata = i2c->pdata;
unsigned long clkin = clk_get_rate(i2c->clk);
unsigned int divs, div1;
unsigned long target_frequency;
u32 iiccon;
int freq;
i2c->clkrate = clkin;
clkin /= 1000; /* clkin now in KHz */
dev_dbg(i2c->dev, "pdata desired frequency %lu\n", pdata->frequency);
target_frequency = pdata->frequency ?: I2C_MAX_STANDARD_MODE_FREQ;
target_frequency /= 1000; /* Target frequency now in KHz */
freq = s3c24xx_i2c_calcdivisor(clkin, target_frequency, &div1, &divs);
if (freq > target_frequency) {
dev_err(i2c->dev,
"Unable to achieve desired frequency %luKHz." \
" Lowest achievable %dKHz\n", target_frequency, freq);
return -EINVAL;
}
*got = freq;
iiccon = readl(i2c->regs + S3C2410_IICCON);
iiccon &= ~(S3C2410_IICCON_SCALEMASK | S3C2410_IICCON_TXDIV_512);
iiccon |= (divs-1);
if (div1 == 512)
iiccon |= S3C2410_IICCON_TXDIV_512;
if (i2c->quirks & QUIRK_POLL)
iiccon |= S3C2410_IICCON_SCALE(2);
writel(iiccon, i2c->regs + S3C2410_IICCON);
if (i2c->quirks & QUIRK_S3C2440) {
unsigned long sda_delay;
if (pdata->sda_delay) {
sda_delay = clkin * pdata->sda_delay;
sda_delay = DIV_ROUND_UP(sda_delay, 1000000);
sda_delay = DIV_ROUND_UP(sda_delay, 5);
if (sda_delay > 3)
sda_delay = 3;
sda_delay |= S3C2410_IICLC_FILTER_ON;
} else
sda_delay = 0;
dev_dbg(i2c->dev, "IICLC=%08lx\n", sda_delay);
writel(sda_delay, i2c->regs + S3C2440_IICLC);
}
return 0;
}
#ifdef CONFIG_OF
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
{
int i;
if (i2c->quirks & QUIRK_NO_GPIO)
return 0;
for (i = 0; i < 2; i++) {
i2c->gpios[i] = devm_gpiod_get_index(i2c->dev, NULL,
i, GPIOD_ASIS);
if (IS_ERR(i2c->gpios[i])) {
dev_err(i2c->dev, "i2c gpio invalid at index %d\n", i);
return -EINVAL;
}
}
return 0;
}
#else
static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
{
return 0;
}
#endif
/*
* initialise the controller, set the IO lines and frequency
*/
static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
{
struct s3c2410_platform_i2c *pdata;
unsigned int freq;
/* get the plafrom data */
pdata = i2c->pdata;
/* write slave address */
writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD);
dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr);
writel(0, i2c->regs + S3C2410_IICCON);
writel(0, i2c->regs + S3C2410_IICSTAT);
/* we need to work out the divisors for the clock... */
if (s3c24xx_i2c_clockrate(i2c, &freq) != 0) {
dev_err(i2c->dev, "cannot meet bus frequency required\n");
return -EINVAL;
}
/* todo - check that the i2c lines aren't being dragged anywhere */
dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02x\n",
readl(i2c->regs + S3C2410_IICCON));
return 0;
}
#ifdef CONFIG_OF
/*
* Parse the device tree node and retreive the platform data.
*/
static void
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c)
{
struct s3c2410_platform_i2c *pdata = i2c->pdata;
int id;
if (!np)
return;
pdata->bus_num = -1; /* i2c bus number is dynamically assigned */
of_property_read_u32(np, "samsung,i2c-sda-delay", &pdata->sda_delay);
of_property_read_u32(np, "samsung,i2c-slave-addr", &pdata->slave_addr);
of_property_read_u32(np, "samsung,i2c-max-bus-freq",
(u32 *)&pdata->frequency);
/*
* Exynos5's legacy i2c controller and new high speed i2c
* controller have muxed interrupt sources. By default the
* interrupts for 4-channel HS-I2C controller are enabled.
* If nodes for first four channels of legacy i2c controller
* are available then re-configure the interrupts via the
* system register.
*/
id = of_alias_get_id(np, "i2c");
i2c->sysreg = syscon_regmap_lookup_by_phandle(np,
"samsung,sysreg-phandle");
if (IS_ERR(i2c->sysreg))
return;
regmap_update_bits(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, BIT(id), 0);
}
#else
static void
s3c24xx_i2c_parse_dt(struct device_node *np, struct s3c24xx_i2c *i2c) { }
#endif
static int s3c24xx_i2c_probe(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c;
struct s3c2410_platform_i2c *pdata = NULL;
struct resource *res;
int ret;
if (!pdev->dev.of_node) {
pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "no platform data\n");
return -EINVAL;
}
}
i2c = devm_kzalloc(&pdev->dev, sizeof(struct s3c24xx_i2c), GFP_KERNEL);
if (!i2c)
return -ENOMEM;
i2c->pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!i2c->pdata)
return -ENOMEM;
i2c->quirks = s3c24xx_get_device_quirks(pdev);
i2c->sysreg = ERR_PTR(-ENOENT);
if (pdata)
memcpy(i2c->pdata, pdata, sizeof(*pdata));
else
s3c24xx_i2c_parse_dt(pdev->dev.of_node, i2c);
strscpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name));
i2c->adap.owner = THIS_MODULE;
i2c->adap.algo = &s3c24xx_i2c_algorithm;
i2c->adap.retries = 2;
i2c->adap.class = I2C_CLASS_DEPRECATED;
i2c->tx_setup = 50;
init_waitqueue_head(&i2c->wait);
/* find the clock and enable it */
i2c->dev = &pdev->dev;
i2c->clk = devm_clk_get(&pdev->dev, "i2c");
if (IS_ERR(i2c->clk)) {
dev_err(&pdev->dev, "cannot get clock\n");
return -ENOENT;
}
dev_dbg(&pdev->dev, "clock source %p\n", i2c->clk);
/* map the registers */
i2c->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(i2c->regs))
return PTR_ERR(i2c->regs);
dev_dbg(&pdev->dev, "registers %p (%p)\n",
i2c->regs, res);
/* setup info block for the i2c core */
i2c->adap.algo_data = i2c;
i2c->adap.dev.parent = &pdev->dev;
i2c->pctrl = devm_pinctrl_get_select_default(i2c->dev);
/* inititalise the i2c gpio lines */
if (i2c->pdata->cfg_gpio)
i2c->pdata->cfg_gpio(to_platform_device(i2c->dev));
else if (IS_ERR(i2c->pctrl) && s3c24xx_i2c_parse_dt_gpio(i2c))
return -EINVAL;
/* initialise the i2c controller */
ret = clk_prepare_enable(i2c->clk);
if (ret) {
dev_err(&pdev->dev, "I2C clock enable failed\n");
return ret;
}
ret = s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
if (ret != 0) {
dev_err(&pdev->dev, "I2C controller init failed\n");
clk_unprepare(i2c->clk);
return ret;
}
/*
* find the IRQ for this unit (note, this relies on the init call to
* ensure no current IRQs pending
*/
if (!(i2c->quirks & QUIRK_POLL)) {
i2c->irq = ret = platform_get_irq(pdev, 0);
if (ret < 0) {
clk_unprepare(i2c->clk);
return ret;
}
ret = devm_request_irq(&pdev->dev, i2c->irq, s3c24xx_i2c_irq,
0, dev_name(&pdev->dev), i2c);
if (ret != 0) {
dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq);
clk_unprepare(i2c->clk);
return ret;
}
}
/*
* Note, previous versions of the driver used i2c_add_adapter()
* to add the bus at any number. We now pass the bus number via
* the platform data, so if unset it will now default to always
* being bus 0.
*/
i2c->adap.nr = i2c->pdata->bus_num;
i2c->adap.dev.of_node = pdev->dev.of_node;
platform_set_drvdata(pdev, i2c);
pm_runtime_enable(&pdev->dev);
ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
pm_runtime_disable(&pdev->dev);
clk_unprepare(i2c->clk);
return ret;
}
dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev));
return 0;
}
static void s3c24xx_i2c_remove(struct platform_device *pdev)
{
struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev);
clk_unprepare(i2c->clk);
pm_runtime_disable(&pdev->dev);
i2c_del_adapter(&i2c->adap);
}
static int s3c24xx_i2c_suspend_noirq(struct device *dev)
{
struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
i2c_mark_adapter_suspended(&i2c->adap);
if (!IS_ERR(i2c->sysreg))
regmap_read(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, &i2c->sys_i2c_cfg);
return 0;
}
static int s3c24xx_i2c_resume_noirq(struct device *dev)
{
struct s3c24xx_i2c *i2c = dev_get_drvdata(dev);
int ret;
if (!IS_ERR(i2c->sysreg))
regmap_write(i2c->sysreg, EXYNOS5_SYS_I2C_CFG, i2c->sys_i2c_cfg);
ret = clk_enable(i2c->clk);
if (ret)
return ret;
s3c24xx_i2c_init(i2c);
clk_disable(i2c->clk);
i2c_mark_adapter_resumed(&i2c->adap);
return 0;
}
static const struct dev_pm_ops s3c24xx_i2c_dev_pm_ops = {
NOIRQ_SYSTEM_SLEEP_PM_OPS(s3c24xx_i2c_suspend_noirq,
s3c24xx_i2c_resume_noirq)
};
static struct platform_driver s3c24xx_i2c_driver = {
.probe = s3c24xx_i2c_probe,
.remove_new = s3c24xx_i2c_remove,
.id_table = s3c24xx_driver_ids,
.driver = {
.name = "s3c-i2c",
.pm = pm_sleep_ptr(&s3c24xx_i2c_dev_pm_ops),
.of_match_table = of_match_ptr(s3c24xx_i2c_match),
},
};
static int __init i2c_adap_s3c_init(void)
{
return platform_driver_register(&s3c24xx_i2c_driver);
}
subsys_initcall(i2c_adap_s3c_init);
static void __exit i2c_adap_s3c_exit(void)
{
platform_driver_unregister(&s3c24xx_i2c_driver);
}
module_exit(i2c_adap_s3c_exit);
MODULE_DESCRIPTION("S3C24XX I2C Bus driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
|