1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* 3-axis accelerometer driver supporting many I2C Bosch-Sensortec chips
* Copyright (c) 2014, Intel Corporation.
*/
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/acpi.h>
#include <linux/regmap.h>
#include "bmc150-accel.h"
#ifdef CONFIG_ACPI
static const struct acpi_device_id bmc150_acpi_dual_accel_ids[] = {
{"BOSC0200"},
{"DUAL250E"},
{ }
};
/*
* The DUAL250E ACPI device for 360° hinges type 2-in-1s with 1 accelerometer
* in the display and 1 in the hinge has an ACPI-method (DSM) to tell the
* ACPI code about the angle between the 2 halves. This will make the ACPI
* code enable/disable the keyboard and touchpad. We need to call this to avoid
* the keyboard being disabled when the 2-in-1 is turned-on or resumed while
* fully folded into tablet mode (which gets detected with a HALL-sensor).
* If we don't call this then the keyboard won't work even when the 2-in-1 is
* changed to be used in laptop mode after the power-on / resume.
*
* This DSM takes 2 angles, selected by setting aux0 to 0 or 1, these presumably
* define the angle between the gravity vector measured by the accelerometer in
* the display (aux0=0) resp. the base (aux0=1) and some reference vector.
* The 2 angles get subtracted from each other so the reference vector does
* not matter and we can simply leave the second angle at 0.
*/
#define BMC150_DSM_GUID "7681541e-8827-4239-8d9d-36be7fe12542"
#define DUAL250E_SET_ANGLE_FN_INDEX 3
struct dual250e_set_angle_args {
u32 aux0;
u32 ang0;
u32 rawx;
u32 rawy;
u32 rawz;
} __packed;
static bool bmc150_acpi_set_angle_dsm(struct i2c_client *client, u32 aux0, u32 ang0)
{
struct acpi_device *adev = ACPI_COMPANION(&client->dev);
struct dual250e_set_angle_args args = {
.aux0 = aux0,
.ang0 = ang0,
};
union acpi_object args_obj, *obj;
guid_t guid;
if (!acpi_dev_hid_uid_match(adev, "DUAL250E", NULL))
return false;
guid_parse(BMC150_DSM_GUID, &guid);
if (!acpi_check_dsm(adev->handle, &guid, 0, BIT(DUAL250E_SET_ANGLE_FN_INDEX)))
return false;
/*
* Note this triggers the following warning:
* "ACPI Warning: \_SB.PCI0.I2C2.ACC1._DSM: Argument #4 type mismatch -
* Found [Buffer], ACPI requires [Package]"
* This is unavoidable since the _DSM implementation expects a "naked"
* buffer, so wrapping it in a package will _not_ work.
*/
args_obj.type = ACPI_TYPE_BUFFER;
args_obj.buffer.length = sizeof(args);
args_obj.buffer.pointer = (u8 *)&args;
obj = acpi_evaluate_dsm(adev->handle, &guid, 0, DUAL250E_SET_ANGLE_FN_INDEX, &args_obj);
if (!obj) {
dev_err(&client->dev, "Failed to call DSM to enable keyboard and touchpad\n");
return false;
}
ACPI_FREE(obj);
return true;
}
static bool bmc150_acpi_enable_keyboard(struct i2c_client *client)
{
/*
* The EC must see a change for it to re-enable the kbd, so first
* set the angle to 270° (tent/stand mode) and then change it to
* 90° (laptop mode).
*/
if (!bmc150_acpi_set_angle_dsm(client, 0, 270))
return false;
/* The EC needs some time to notice the angle being changed */
msleep(100);
return bmc150_acpi_set_angle_dsm(client, 0, 90);
}
static void bmc150_acpi_resume_work(struct work_struct *work)
{
struct bmc150_accel_data *data =
container_of(work, struct bmc150_accel_data, resume_work.work);
bmc150_acpi_enable_keyboard(data->second_device);
}
static void bmc150_acpi_resume_handler(struct device *dev)
{
struct bmc150_accel_data *data = iio_priv(dev_get_drvdata(dev));
/*
* Delay the bmc150_acpi_enable_keyboard() call till after the system
* resume has completed, otherwise it will not work.
*/
schedule_delayed_work(&data->resume_work, msecs_to_jiffies(1000));
}
/*
* Some acpi_devices describe 2 accelerometers in a single ACPI device,
* try instantiating a second i2c_client for an I2cSerialBusV2 ACPI resource
* with index 1.
*/
static void bmc150_acpi_dual_accel_probe(struct i2c_client *client)
{
struct bmc150_accel_data *data = iio_priv(i2c_get_clientdata(client));
struct acpi_device *adev = ACPI_COMPANION(&client->dev);
char dev_name[16];
struct i2c_board_info board_info = {
.type = "bmc150_accel",
.dev_name = dev_name,
.fwnode = client->dev.fwnode,
};
if (acpi_match_device_ids(adev, bmc150_acpi_dual_accel_ids))
return;
/*
* The 2nd accel sits in the base of 2-in-1s. The suffix is static, as
* there should never be more then 1 ACPI node with 2 accelerometers.
*/
snprintf(dev_name, sizeof(dev_name), "%s:base", acpi_device_hid(adev));
board_info.irq = acpi_dev_gpio_irq_get(adev, 1);
data->second_device = i2c_acpi_new_device(&client->dev, 1, &board_info);
if (!IS_ERR(data->second_device) && bmc150_acpi_enable_keyboard(data->second_device)) {
INIT_DELAYED_WORK(&data->resume_work, bmc150_acpi_resume_work);
data->resume_callback = bmc150_acpi_resume_handler;
}
}
static void bmc150_acpi_dual_accel_remove(struct i2c_client *client)
{
struct bmc150_accel_data *data = iio_priv(i2c_get_clientdata(client));
if (data->resume_callback)
cancel_delayed_work_sync(&data->resume_work);
i2c_unregister_device(data->second_device);
}
#else
static void bmc150_acpi_dual_accel_probe(struct i2c_client *client) {}
static void bmc150_acpi_dual_accel_remove(struct i2c_client *client) {}
#endif
static int bmc150_accel_probe(struct i2c_client *client)
{
const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct regmap *regmap;
const char *name = NULL;
enum bmc150_type type = BOSCH_UNKNOWN;
bool block_supported =
i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_READ_I2C_BLOCK);
int ret;
regmap = devm_regmap_init_i2c(client, &bmc150_regmap_conf);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to initialize i2c regmap\n");
return PTR_ERR(regmap);
}
if (id) {
name = id->name;
type = id->driver_data;
}
ret = bmc150_accel_core_probe(&client->dev, regmap, client->irq,
type, name, block_supported);
if (ret)
return ret;
/*
* The !id check avoids recursion when probe() gets called
* for the second client.
*/
if (!id && has_acpi_companion(&client->dev))
bmc150_acpi_dual_accel_probe(client);
return 0;
}
static void bmc150_accel_remove(struct i2c_client *client)
{
bmc150_acpi_dual_accel_remove(client);
bmc150_accel_core_remove(&client->dev);
}
static const struct acpi_device_id bmc150_accel_acpi_match[] = {
{"BMA0255"},
{"BMA0280"},
{"BMA222"},
{"BMA222E"},
{"BMA250E"},
{"BMC150A"},
{"BMI055A"},
{"BOSC0200"},
{"BSBA0150"},
{"DUAL250E"},
{ },
};
MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
static const struct i2c_device_id bmc150_accel_id[] = {
{"bma222"},
{"bma222e"},
{"bma250e"},
{"bma253"},
{"bma254"},
{"bma255"},
{"bma280"},
{"bmc150_accel"},
{"bmc156_accel", BOSCH_BMC156},
{"bmi055_accel"},
{}
};
MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
static const struct of_device_id bmc150_accel_of_match[] = {
{ .compatible = "bosch,bma222" },
{ .compatible = "bosch,bma222e" },
{ .compatible = "bosch,bma250e" },
{ .compatible = "bosch,bma253" },
{ .compatible = "bosch,bma254" },
{ .compatible = "bosch,bma255" },
{ .compatible = "bosch,bma280" },
{ .compatible = "bosch,bmc150_accel" },
{ .compatible = "bosch,bmc156_accel" },
{ .compatible = "bosch,bmi055_accel" },
{ },
};
MODULE_DEVICE_TABLE(of, bmc150_accel_of_match);
static struct i2c_driver bmc150_accel_driver = {
.driver = {
.name = "bmc150_accel_i2c",
.of_match_table = bmc150_accel_of_match,
.acpi_match_table = bmc150_accel_acpi_match,
.pm = &bmc150_accel_pm_ops,
},
.probe = bmc150_accel_probe,
.remove = bmc150_accel_remove,
.id_table = bmc150_accel_id,
};
module_i2c_driver(bmc150_accel_driver);
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("BMC150 I2C accelerometer driver");
MODULE_IMPORT_NS(IIO_BMC150);
|