1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
|
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com>
* Copyright (c) 2012 Bosch Sensortec GmbH
* Copyright (c) 2012 Unixphere AB
* Copyright (c) 2014 Intel Corporation
* Copyright (c) 2016 Linus Walleij <linus.walleij@linaro.org>
*
* Driver for Bosch Sensortec BMP180 and BMP280 digital pressure sensor.
*
* Datasheet:
* https://cdn-shop.adafruit.com/datasheets/BST-BMP180-DS000-09.pdf
* https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
* https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf
* https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf
*
* Notice:
* The link to the bmp180 datasheet points to an outdated version missing these changes:
* - Changed document referral from ANP015 to BST-MPS-AN004-00 on page 26
* - Updated equation for B3 param on section 3.5 to ((((long)AC1 * 4 + X3) << oss) + 2) / 4
* - Updated RoHS directive to 2011/65/EU effective 8 June 2011 on page 26
*/
#define pr_fmt(fmt) "bmp280: " fmt
#include <linux/bitops.h>
#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
#include <linux/interrupt.h>
#include <linux/irq.h> /* For irq_get_irq_data() */
#include <linux/completion.h>
#include <linux/pm_runtime.h>
#include <linux/random.h>
#include <asm/unaligned.h>
#include "bmp280.h"
/*
* These enums are used for indexing into the array of calibration
* coefficients for BMP180.
*/
enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD };
enum bmp380_odr {
BMP380_ODR_200HZ,
BMP380_ODR_100HZ,
BMP380_ODR_50HZ,
BMP380_ODR_25HZ,
BMP380_ODR_12_5HZ,
BMP380_ODR_6_25HZ,
BMP380_ODR_3_125HZ,
BMP380_ODR_1_5625HZ,
BMP380_ODR_0_78HZ,
BMP380_ODR_0_39HZ,
BMP380_ODR_0_2HZ,
BMP380_ODR_0_1HZ,
BMP380_ODR_0_05HZ,
BMP380_ODR_0_02HZ,
BMP380_ODR_0_01HZ,
BMP380_ODR_0_006HZ,
BMP380_ODR_0_003HZ,
BMP380_ODR_0_0015HZ,
};
/*
* These enums are used for indexing into the array of compensation
* parameters for BMP280.
*/
enum { T1, T2, T3, P1, P2, P3, P4, P5, P6, P7, P8, P9 };
enum {
/* Temperature calib indexes */
BMP380_T1 = 0,
BMP380_T2 = 2,
BMP380_T3 = 4,
/* Pressure calib indexes */
BMP380_P1 = 5,
BMP380_P2 = 7,
BMP380_P3 = 9,
BMP380_P4 = 10,
BMP380_P5 = 11,
BMP380_P6 = 13,
BMP380_P7 = 15,
BMP380_P8 = 16,
BMP380_P9 = 17,
BMP380_P10 = 19,
BMP380_P11 = 20,
};
static const struct iio_chan_spec bmp280_channels[] = {
{
.type = IIO_PRESSURE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
},
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
},
{
.type = IIO_HUMIDITYRELATIVE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
},
};
static const struct iio_chan_spec bmp380_channels[] = {
{
.type = IIO_PRESSURE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
},
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
},
{
.type = IIO_HUMIDITYRELATIVE,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
},
};
static int bmp280_read_calib(struct bmp280_data *data)
{
struct bmp280_calib *calib = &data->calib.bmp280;
int ret;
/* Read temperature and pressure calibration values. */
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START,
data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf));
if (ret < 0) {
dev_err(data->dev,
"failed to read temperature and pressure calibration parameters\n");
return ret;
}
/* Toss the temperature and pressure calibration data into the entropy pool */
add_device_randomness(data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf));
/* Parse temperature calibration values. */
calib->T1 = le16_to_cpu(data->bmp280_cal_buf[T1]);
calib->T2 = le16_to_cpu(data->bmp280_cal_buf[T2]);
calib->T3 = le16_to_cpu(data->bmp280_cal_buf[T3]);
/* Parse pressure calibration values. */
calib->P1 = le16_to_cpu(data->bmp280_cal_buf[P1]);
calib->P2 = le16_to_cpu(data->bmp280_cal_buf[P2]);
calib->P3 = le16_to_cpu(data->bmp280_cal_buf[P3]);
calib->P4 = le16_to_cpu(data->bmp280_cal_buf[P4]);
calib->P5 = le16_to_cpu(data->bmp280_cal_buf[P5]);
calib->P6 = le16_to_cpu(data->bmp280_cal_buf[P6]);
calib->P7 = le16_to_cpu(data->bmp280_cal_buf[P7]);
calib->P8 = le16_to_cpu(data->bmp280_cal_buf[P8]);
calib->P9 = le16_to_cpu(data->bmp280_cal_buf[P9]);
return 0;
}
static int bme280_read_calib(struct bmp280_data *data)
{
struct bmp280_calib *calib = &data->calib.bmp280;
struct device *dev = data->dev;
unsigned int tmp;
int ret;
/* Load shared calibration params with bmp280 first */
ret = bmp280_read_calib(data);
if (ret < 0) {
dev_err(dev, "failed to read common bmp280 calibration parameters\n");
return ret;
}
/*
* Read humidity calibration values.
* Due to some odd register addressing we cannot just
* do a big bulk read. Instead, we have to read each Hx
* value separately and sometimes do some bit shifting...
* Humidity data is only available on BME280.
*/
ret = regmap_read(data->regmap, BMP280_REG_COMP_H1, &tmp);
if (ret < 0) {
dev_err(dev, "failed to read H1 comp value\n");
return ret;
}
calib->H1 = tmp;
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2,
&data->le16, sizeof(data->le16));
if (ret < 0) {
dev_err(dev, "failed to read H2 comp value\n");
return ret;
}
calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15);
ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp);
if (ret < 0) {
dev_err(dev, "failed to read H3 comp value\n");
return ret;
}
calib->H3 = tmp;
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4,
&data->be16, sizeof(data->be16));
if (ret < 0) {
dev_err(dev, "failed to read H4 comp value\n");
return ret;
}
calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) |
(be16_to_cpu(data->be16) & 0xf), 11);
ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5,
&data->le16, sizeof(data->le16));
if (ret < 0) {
dev_err(dev, "failed to read H5 comp value\n");
return ret;
}
calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11);
ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp);
if (ret < 0) {
dev_err(dev, "failed to read H6 comp value\n");
return ret;
}
calib->H6 = sign_extend32(tmp, 7);
return 0;
}
/*
* Returns humidity in percent, resolution is 0.01 percent. Output value of
* "47445" represents 47445/1024 = 46.333 %RH.
*
* Taken from BME280 datasheet, Section 4.2.3, "Compensation formula".
*/
static u32 bmp280_compensate_humidity(struct bmp280_data *data,
s32 adc_humidity)
{
struct bmp280_calib *calib = &data->calib.bmp280;
s32 var;
var = ((s32)data->t_fine) - (s32)76800;
var = ((((adc_humidity << 14) - (calib->H4 << 20) - (calib->H5 * var))
+ (s32)16384) >> 15) * (((((((var * calib->H6) >> 10)
* (((var * (s32)calib->H3) >> 11) + (s32)32768)) >> 10)
+ (s32)2097152) * calib->H2 + 8192) >> 14);
var -= ((((var >> 15) * (var >> 15)) >> 7) * (s32)calib->H1) >> 4;
var = clamp_val(var, 0, 419430400);
return var >> 12;
};
/*
* Returns temperature in DegC, resolution is 0.01 DegC. Output value of
* "5123" equals 51.23 DegC. t_fine carries fine temperature as global
* value.
*
* Taken from datasheet, Section 3.11.3, "Compensation formula".
*/
static s32 bmp280_compensate_temp(struct bmp280_data *data,
s32 adc_temp)
{
struct bmp280_calib *calib = &data->calib.bmp280;
s32 var1, var2;
var1 = (((adc_temp >> 3) - ((s32)calib->T1 << 1)) *
((s32)calib->T2)) >> 11;
var2 = (((((adc_temp >> 4) - ((s32)calib->T1)) *
((adc_temp >> 4) - ((s32)calib->T1))) >> 12) *
((s32)calib->T3)) >> 14;
data->t_fine = var1 + var2;
return (data->t_fine * 5 + 128) >> 8;
}
/*
* Returns pressure in Pa as unsigned 32 bit integer in Q24.8 format (24
* integer bits and 8 fractional bits). Output value of "24674867"
* represents 24674867/256 = 96386.2 Pa = 963.862 hPa
*
* Taken from datasheet, Section 3.11.3, "Compensation formula".
*/
static u32 bmp280_compensate_press(struct bmp280_data *data,
s32 adc_press)
{
struct bmp280_calib *calib = &data->calib.bmp280;
s64 var1, var2, p;
var1 = ((s64)data->t_fine) - 128000;
var2 = var1 * var1 * (s64)calib->P6;
var2 += (var1 * (s64)calib->P5) << 17;
var2 += ((s64)calib->P4) << 35;
var1 = ((var1 * var1 * (s64)calib->P3) >> 8) +
((var1 * (s64)calib->P2) << 12);
var1 = ((((s64)1) << 47) + var1) * ((s64)calib->P1) >> 33;
if (var1 == 0)
return 0;
p = ((((s64)1048576 - adc_press) << 31) - var2) * 3125;
p = div64_s64(p, var1);
var1 = (((s64)calib->P9) * (p >> 13) * (p >> 13)) >> 25;
var2 = ((s64)(calib->P8) * p) >> 19;
p = ((p + var1 + var2) >> 8) + (((s64)calib->P7) << 4);
return (u32)p;
}
static int bmp280_read_temp(struct bmp280_data *data,
int *val)
{
s32 adc_temp, comp_temp;
int ret;
ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB,
data->buf, sizeof(data->buf));
if (ret < 0) {
dev_err(data->dev, "failed to read temperature\n");
return ret;
}
adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
if (adc_temp == BMP280_TEMP_SKIPPED) {
/* reading was skipped */
dev_err(data->dev, "reading temperature skipped\n");
return -EIO;
}
comp_temp = bmp280_compensate_temp(data, adc_temp);
/*
* val might be NULL if we're called by the read_press routine,
* who only cares about the carry over t_fine value.
*/
if (val) {
*val = comp_temp * 10;
return IIO_VAL_INT;
}
return 0;
}
static int bmp280_read_press(struct bmp280_data *data,
int *val, int *val2)
{
u32 comp_press;
s32 adc_press;
int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp280_read_temp(data, NULL);
if (ret < 0)
return ret;
ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB,
data->buf, sizeof(data->buf));
if (ret < 0) {
dev_err(data->dev, "failed to read pressure\n");
return ret;
}
adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf));
if (adc_press == BMP280_PRESS_SKIPPED) {
/* reading was skipped */
dev_err(data->dev, "reading pressure skipped\n");
return -EIO;
}
comp_press = bmp280_compensate_press(data, adc_press);
*val = comp_press;
*val2 = 256000;
return IIO_VAL_FRACTIONAL;
}
static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
{
u32 comp_humidity;
s32 adc_humidity;
int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp280_read_temp(data, NULL);
if (ret < 0)
return ret;
ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB,
&data->be16, sizeof(data->be16));
if (ret < 0) {
dev_err(data->dev, "failed to read humidity\n");
return ret;
}
adc_humidity = be16_to_cpu(data->be16);
if (adc_humidity == BMP280_HUMIDITY_SKIPPED) {
/* reading was skipped */
dev_err(data->dev, "reading humidity skipped\n");
return -EIO;
}
comp_humidity = bmp280_compensate_humidity(data, adc_humidity);
*val = comp_humidity * 1000 / 1024;
return IIO_VAL_INT;
}
static int bmp280_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct bmp280_data *data = iio_priv(indio_dev);
int ret;
pm_runtime_get_sync(data->dev);
mutex_lock(&data->lock);
switch (mask) {
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_HUMIDITYRELATIVE:
ret = data->chip_info->read_humid(data, val, val2);
break;
case IIO_PRESSURE:
ret = data->chip_info->read_press(data, val, val2);
break;
case IIO_TEMP:
ret = data->chip_info->read_temp(data, val);
break;
default:
ret = -EINVAL;
break;
}
break;
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
switch (chan->type) {
case IIO_HUMIDITYRELATIVE:
*val = 1 << data->oversampling_humid;
ret = IIO_VAL_INT;
break;
case IIO_PRESSURE:
*val = 1 << data->oversampling_press;
ret = IIO_VAL_INT;
break;
case IIO_TEMP:
*val = 1 << data->oversampling_temp;
ret = IIO_VAL_INT;
break;
default:
ret = -EINVAL;
break;
}
break;
case IIO_CHAN_INFO_SAMP_FREQ:
if (!data->chip_info->sampling_freq_avail) {
ret = -EINVAL;
break;
}
*val = data->chip_info->sampling_freq_avail[data->sampling_freq][0];
*val2 = data->chip_info->sampling_freq_avail[data->sampling_freq][1];
ret = IIO_VAL_INT_PLUS_MICRO;
break;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
if (!data->chip_info->iir_filter_coeffs_avail) {
ret = -EINVAL;
break;
}
*val = (1 << data->iir_filter_coeff) - 1;
ret = IIO_VAL_INT;
break;
default:
ret = -EINVAL;
break;
}
mutex_unlock(&data->lock);
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
return ret;
}
static int bmp280_write_oversampling_ratio_humid(struct bmp280_data *data,
int val)
{
const int *avail = data->chip_info->oversampling_humid_avail;
const int n = data->chip_info->num_oversampling_humid_avail;
int ret, prev;
int i;
for (i = 0; i < n; i++) {
if (avail[i] == val) {
prev = data->oversampling_humid;
data->oversampling_humid = ilog2(val);
ret = data->chip_info->chip_config(data);
if (ret) {
data->oversampling_humid = prev;
data->chip_info->chip_config(data);
return ret;
}
return 0;
}
}
return -EINVAL;
}
static int bmp280_write_oversampling_ratio_temp(struct bmp280_data *data,
int val)
{
const int *avail = data->chip_info->oversampling_temp_avail;
const int n = data->chip_info->num_oversampling_temp_avail;
int ret, prev;
int i;
for (i = 0; i < n; i++) {
if (avail[i] == val) {
prev = data->oversampling_temp;
data->oversampling_temp = ilog2(val);
ret = data->chip_info->chip_config(data);
if (ret) {
data->oversampling_temp = prev;
data->chip_info->chip_config(data);
return ret;
}
return 0;
}
}
return -EINVAL;
}
static int bmp280_write_oversampling_ratio_press(struct bmp280_data *data,
int val)
{
const int *avail = data->chip_info->oversampling_press_avail;
const int n = data->chip_info->num_oversampling_press_avail;
int ret, prev;
int i;
for (i = 0; i < n; i++) {
if (avail[i] == val) {
prev = data->oversampling_press;
data->oversampling_press = ilog2(val);
ret = data->chip_info->chip_config(data);
if (ret) {
data->oversampling_press = prev;
data->chip_info->chip_config(data);
return ret;
}
return 0;
}
}
return -EINVAL;
}
static int bmp280_write_sampling_frequency(struct bmp280_data *data,
int val, int val2)
{
const int (*avail)[2] = data->chip_info->sampling_freq_avail;
const int n = data->chip_info->num_sampling_freq_avail;
int ret, prev;
int i;
for (i = 0; i < n; i++) {
if (avail[i][0] == val && avail[i][1] == val2) {
prev = data->sampling_freq;
data->sampling_freq = i;
ret = data->chip_info->chip_config(data);
if (ret) {
data->sampling_freq = prev;
data->chip_info->chip_config(data);
return ret;
}
return 0;
}
}
return -EINVAL;
}
static int bmp280_write_iir_filter_coeffs(struct bmp280_data *data, int val)
{
const int *avail = data->chip_info->iir_filter_coeffs_avail;
const int n = data->chip_info->num_iir_filter_coeffs_avail;
int ret, prev;
int i;
for (i = 0; i < n; i++) {
if (avail[i] - 1 == val) {
prev = data->iir_filter_coeff;
data->iir_filter_coeff = i;
ret = data->chip_info->chip_config(data);
if (ret) {
data->iir_filter_coeff = prev;
data->chip_info->chip_config(data);
return ret;
}
return 0;
}
}
return -EINVAL;
}
static int bmp280_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct bmp280_data *data = iio_priv(indio_dev);
int ret = 0;
/*
* Helper functions to update sensor running configuration.
* If an error happens applying new settings, will try restore
* previous parameters to ensure the sensor is left in a known
* working configuration.
*/
switch (mask) {
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
pm_runtime_get_sync(data->dev);
mutex_lock(&data->lock);
switch (chan->type) {
case IIO_HUMIDITYRELATIVE:
ret = bmp280_write_oversampling_ratio_humid(data, val);
break;
case IIO_PRESSURE:
ret = bmp280_write_oversampling_ratio_press(data, val);
break;
case IIO_TEMP:
ret = bmp280_write_oversampling_ratio_temp(data, val);
break;
default:
ret = -EINVAL;
break;
}
mutex_unlock(&data->lock);
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
break;
case IIO_CHAN_INFO_SAMP_FREQ:
pm_runtime_get_sync(data->dev);
mutex_lock(&data->lock);
ret = bmp280_write_sampling_frequency(data, val, val2);
mutex_unlock(&data->lock);
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
break;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
pm_runtime_get_sync(data->dev);
mutex_lock(&data->lock);
ret = bmp280_write_iir_filter_coeffs(data, val);
mutex_unlock(&data->lock);
pm_runtime_mark_last_busy(data->dev);
pm_runtime_put_autosuspend(data->dev);
break;
default:
return -EINVAL;
}
return ret;
}
static int bmp280_read_avail(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
const int **vals, int *type, int *length,
long mask)
{
struct bmp280_data *data = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
switch (chan->type) {
case IIO_PRESSURE:
*vals = data->chip_info->oversampling_press_avail;
*length = data->chip_info->num_oversampling_press_avail;
break;
case IIO_TEMP:
*vals = data->chip_info->oversampling_temp_avail;
*length = data->chip_info->num_oversampling_temp_avail;
break;
default:
return -EINVAL;
}
*type = IIO_VAL_INT;
return IIO_AVAIL_LIST;
case IIO_CHAN_INFO_SAMP_FREQ:
*vals = (const int *)data->chip_info->sampling_freq_avail;
*type = IIO_VAL_INT_PLUS_MICRO;
/* Values are stored in a 2D matrix */
*length = data->chip_info->num_sampling_freq_avail;
return IIO_AVAIL_LIST;
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
*vals = data->chip_info->iir_filter_coeffs_avail;
*type = IIO_VAL_INT;
*length = data->chip_info->num_iir_filter_coeffs_avail;
return IIO_AVAIL_LIST;
default:
return -EINVAL;
}
}
static const struct iio_info bmp280_info = {
.read_raw = &bmp280_read_raw,
.read_avail = &bmp280_read_avail,
.write_raw = &bmp280_write_raw,
};
static int bmp280_chip_config(struct bmp280_data *data)
{
u8 osrs = FIELD_PREP(BMP280_OSRS_TEMP_MASK, data->oversampling_temp + 1) |
FIELD_PREP(BMP280_OSRS_PRESS_MASK, data->oversampling_press + 1);
int ret;
ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS,
BMP280_OSRS_TEMP_MASK |
BMP280_OSRS_PRESS_MASK |
BMP280_MODE_MASK,
osrs | BMP280_MODE_NORMAL);
if (ret < 0) {
dev_err(data->dev,
"failed to write ctrl_meas register\n");
return ret;
}
ret = regmap_update_bits(data->regmap, BMP280_REG_CONFIG,
BMP280_FILTER_MASK,
BMP280_FILTER_4X);
if (ret < 0) {
dev_err(data->dev,
"failed to write config register\n");
return ret;
}
return ret;
}
static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
const struct bmp280_chip_info bmp280_chip_info = {
.id_reg = BMP280_REG_ID,
.chip_id = BMP280_CHIP_ID,
.regmap_config = &bmp280_regmap_config,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 2,
.oversampling_temp_avail = bmp280_oversampling_avail,
.num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
/*
* Oversampling config values on BMx280 have one additional setting
* that other generations of the family don't:
* The value 0 means the measurement is bypassed instead of
* oversampling set to x1.
*
* To account for this difference, and preserve the same common
* config logic, this is handled later on chip_config callback
* incrementing one unit the oversampling setting.
*/
.oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1,
.oversampling_press_avail = bmp280_oversampling_avail,
.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
.oversampling_press_default = BMP280_OSRS_PRESS_16X - 1,
.chip_config = bmp280_chip_config,
.read_temp = bmp280_read_temp,
.read_press = bmp280_read_press,
.read_calib = bmp280_read_calib,
};
EXPORT_SYMBOL_NS(bmp280_chip_info, IIO_BMP280);
static int bme280_chip_config(struct bmp280_data *data)
{
u8 osrs = FIELD_PREP(BMP280_OSRS_HUMIDITY_MASK, data->oversampling_humid + 1);
int ret;
/*
* Oversampling of humidity must be set before oversampling of
* temperature/pressure is set to become effective.
*/
ret = regmap_update_bits(data->regmap, BMP280_REG_CTRL_HUMIDITY,
BMP280_OSRS_HUMIDITY_MASK, osrs);
if (ret < 0)
return ret;
return bmp280_chip_config(data);
}
const struct bmp280_chip_info bme280_chip_info = {
.id_reg = BMP280_REG_ID,
.chip_id = BME280_CHIP_ID,
.regmap_config = &bmp280_regmap_config,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 3,
.oversampling_temp_avail = bmp280_oversampling_avail,
.num_oversampling_temp_avail = ARRAY_SIZE(bmp280_oversampling_avail),
.oversampling_temp_default = BMP280_OSRS_TEMP_2X - 1,
.oversampling_press_avail = bmp280_oversampling_avail,
.num_oversampling_press_avail = ARRAY_SIZE(bmp280_oversampling_avail),
.oversampling_press_default = BMP280_OSRS_PRESS_16X - 1,
.oversampling_humid_avail = bmp280_oversampling_avail,
.num_oversampling_humid_avail = ARRAY_SIZE(bmp280_oversampling_avail),
.oversampling_humid_default = BMP280_OSRS_HUMIDITY_16X - 1,
.chip_config = bme280_chip_config,
.read_temp = bmp280_read_temp,
.read_press = bmp280_read_press,
.read_humid = bmp280_read_humid,
.read_calib = bme280_read_calib,
};
EXPORT_SYMBOL_NS(bme280_chip_info, IIO_BMP280);
/*
* Helper function to send a command to BMP3XX sensors.
*
* Sensor processes commands written to the CMD register and signals
* execution result through "cmd_rdy" and "cmd_error" flags available on
* STATUS and ERROR registers.
*/
static int bmp380_cmd(struct bmp280_data *data, u8 cmd)
{
unsigned int reg;
int ret;
/* Check if device is ready to process a command */
ret = regmap_read(data->regmap, BMP380_REG_STATUS, ®);
if (ret) {
dev_err(data->dev, "failed to read error register\n");
return ret;
}
if (!(reg & BMP380_STATUS_CMD_RDY_MASK)) {
dev_err(data->dev, "device is not ready to accept commands\n");
return -EBUSY;
}
/* Send command to process */
ret = regmap_write(data->regmap, BMP380_REG_CMD, cmd);
if (ret) {
dev_err(data->dev, "failed to send command to device\n");
return ret;
}
/* Wait for 2ms for command to be processed */
usleep_range(data->start_up_time, data->start_up_time + 100);
/* Check for command processing error */
ret = regmap_read(data->regmap, BMP380_REG_ERROR, ®);
if (ret) {
dev_err(data->dev, "error reading ERROR reg\n");
return ret;
}
if (reg & BMP380_ERR_CMD_MASK) {
dev_err(data->dev, "error processing command 0x%X\n", cmd);
return -EINVAL;
}
return 0;
}
/*
* Returns temperature in Celsius dregrees, resolution is 0.01º C. Output value of
* "5123" equals 51.2º C. t_fine carries fine temperature as global value.
*
* Taken from datasheet, Section Appendix 9, "Compensation formula" and repo
* https://github.com/BoschSensortec/BMP3-Sensor-API.
*/
static s32 bmp380_compensate_temp(struct bmp280_data *data, u32 adc_temp)
{
s64 var1, var2, var3, var4, var5, var6, comp_temp;
struct bmp380_calib *calib = &data->calib.bmp380;
var1 = ((s64) adc_temp) - (((s64) calib->T1) << 8);
var2 = var1 * ((s64) calib->T2);
var3 = var1 * var1;
var4 = var3 * ((s64) calib->T3);
var5 = (var2 << 18) + var4;
var6 = var5 >> 32;
data->t_fine = (s32) var6;
comp_temp = (var6 * 25) >> 14;
comp_temp = clamp_val(comp_temp, BMP380_MIN_TEMP, BMP380_MAX_TEMP);
return (s32) comp_temp;
}
/*
* Returns pressure in Pa as an unsigned 32 bit integer in fractional Pascal.
* Output value of "9528709" represents 9528709/100 = 95287.09 Pa = 952.8709 hPa.
*
* Taken from datasheet, Section 9.3. "Pressure compensation" and repository
* https://github.com/BoschSensortec/BMP3-Sensor-API.
*/
static u32 bmp380_compensate_press(struct bmp280_data *data, u32 adc_press)
{
s64 var1, var2, var3, var4, var5, var6, offset, sensitivity;
struct bmp380_calib *calib = &data->calib.bmp380;
u32 comp_press;
var1 = (s64)data->t_fine * (s64)data->t_fine;
var2 = var1 >> 6;
var3 = (var2 * ((s64) data->t_fine)) >> 8;
var4 = ((s64)calib->P8 * var3) >> 5;
var5 = ((s64)calib->P7 * var1) << 4;
var6 = ((s64)calib->P6 * (s64)data->t_fine) << 22;
offset = ((s64)calib->P5 << 47) + var4 + var5 + var6;
var2 = ((s64)calib->P4 * var3) >> 5;
var4 = ((s64)calib->P3 * var1) << 2;
var5 = ((s64)calib->P2 - ((s64)1 << 14)) *
((s64)data->t_fine << 21);
sensitivity = (((s64) calib->P1 - ((s64) 1 << 14)) << 46) +
var2 + var4 + var5;
var1 = (sensitivity >> 24) * (s64)adc_press;
var2 = (s64)calib->P10 * (s64)data->t_fine;
var3 = var2 + ((s64)calib->P9 << 16);
var4 = (var3 * (s64)adc_press) >> 13;
/*
* Dividing by 10 followed by multiplying by 10 to avoid
* possible overflow caused by (uncomp_data->pressure * partial_data4).
*/
var5 = ((s64)adc_press * div_s64(var4, 10)) >> 9;
var5 *= 10;
var6 = (s64)adc_press * (s64)adc_press;
var2 = ((s64)calib->P11 * var6) >> 16;
var3 = (var2 * (s64)adc_press) >> 7;
var4 = (offset >> 2) + var1 + var5 + var3;
comp_press = ((u64)var4 * 25) >> 40;
comp_press = clamp_val(comp_press, BMP380_MIN_PRES, BMP380_MAX_PRES);
return comp_press;
}
static int bmp380_read_temp(struct bmp280_data *data, int *val)
{
s32 comp_temp;
u32 adc_temp;
int ret;
ret = regmap_bulk_read(data->regmap, BMP380_REG_TEMP_XLSB,
data->buf, sizeof(data->buf));
if (ret) {
dev_err(data->dev, "failed to read temperature\n");
return ret;
}
adc_temp = get_unaligned_le24(data->buf);
if (adc_temp == BMP380_TEMP_SKIPPED) {
dev_err(data->dev, "reading temperature skipped\n");
return -EIO;
}
comp_temp = bmp380_compensate_temp(data, adc_temp);
/*
* Val might be NULL if we're called by the read_press routine,
* who only cares about the carry over t_fine value.
*/
if (val) {
/* IIO reports temperatures in milli Celsius */
*val = comp_temp * 10;
return IIO_VAL_INT;
}
return 0;
}
static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
{
s32 comp_press;
u32 adc_press;
int ret;
/* Read and compensate for temperature so we get a reading of t_fine */
ret = bmp380_read_temp(data, NULL);
if (ret)
return ret;
ret = regmap_bulk_read(data->regmap, BMP380_REG_PRESS_XLSB,
data->buf, sizeof(data->buf));
if (ret) {
dev_err(data->dev, "failed to read pressure\n");
return ret;
}
adc_press = get_unaligned_le24(data->buf);
if (adc_press == BMP380_PRESS_SKIPPED) {
dev_err(data->dev, "reading pressure skipped\n");
return -EIO;
}
comp_press = bmp380_compensate_press(data, adc_press);
*val = comp_press;
/* Compensated pressure is in cPa (centipascals) */
*val2 = 100000;
return IIO_VAL_FRACTIONAL;
}
static int bmp380_read_calib(struct bmp280_data *data)
{
struct bmp380_calib *calib = &data->calib.bmp380;
int ret;
/* Read temperature and pressure calibration data */
ret = regmap_bulk_read(data->regmap, BMP380_REG_CALIB_TEMP_START,
data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf));
if (ret) {
dev_err(data->dev,
"failed to read temperature calibration parameters\n");
return ret;
}
/* Toss the temperature calibration data into the entropy pool */
add_device_randomness(data->bmp380_cal_buf, sizeof(data->bmp380_cal_buf));
/* Parse calibration values */
calib->T1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T1]);
calib->T2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_T2]);
calib->T3 = data->bmp380_cal_buf[BMP380_T3];
calib->P1 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P1]);
calib->P2 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P2]);
calib->P3 = data->bmp380_cal_buf[BMP380_P3];
calib->P4 = data->bmp380_cal_buf[BMP380_P4];
calib->P5 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P5]);
calib->P6 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P6]);
calib->P7 = data->bmp380_cal_buf[BMP380_P7];
calib->P8 = data->bmp380_cal_buf[BMP380_P8];
calib->P9 = get_unaligned_le16(&data->bmp380_cal_buf[BMP380_P9]);
calib->P10 = data->bmp380_cal_buf[BMP380_P10];
calib->P11 = data->bmp380_cal_buf[BMP380_P11];
return 0;
}
static const int bmp380_odr_table[][2] = {
[BMP380_ODR_200HZ] = {200, 0},
[BMP380_ODR_100HZ] = {100, 0},
[BMP380_ODR_50HZ] = {50, 0},
[BMP380_ODR_25HZ] = {25, 0},
[BMP380_ODR_12_5HZ] = {12, 500000},
[BMP380_ODR_6_25HZ] = {6, 250000},
[BMP380_ODR_3_125HZ] = {3, 125000},
[BMP380_ODR_1_5625HZ] = {1, 562500},
[BMP380_ODR_0_78HZ] = {0, 781250},
[BMP380_ODR_0_39HZ] = {0, 390625},
[BMP380_ODR_0_2HZ] = {0, 195313},
[BMP380_ODR_0_1HZ] = {0, 97656},
[BMP380_ODR_0_05HZ] = {0, 48828},
[BMP380_ODR_0_02HZ] = {0, 24414},
[BMP380_ODR_0_01HZ] = {0, 12207},
[BMP380_ODR_0_006HZ] = {0, 6104},
[BMP380_ODR_0_003HZ] = {0, 3052},
[BMP380_ODR_0_0015HZ] = {0, 1526},
};
static int bmp380_preinit(struct bmp280_data *data)
{
/* BMP3xx requires soft-reset as part of initialization */
return bmp380_cmd(data, BMP380_CMD_SOFT_RESET);
}
static int bmp380_chip_config(struct bmp280_data *data)
{
bool change = false, aux;
unsigned int tmp;
u8 osrs;
int ret;
/* Configure power control register */
ret = regmap_update_bits(data->regmap, BMP380_REG_POWER_CONTROL,
BMP380_CTRL_SENSORS_MASK,
BMP380_CTRL_SENSORS_PRESS_EN |
BMP380_CTRL_SENSORS_TEMP_EN);
if (ret) {
dev_err(data->dev,
"failed to write operation control register\n");
return ret;
}
/* Configure oversampling */
osrs = FIELD_PREP(BMP380_OSRS_TEMP_MASK, data->oversampling_temp) |
FIELD_PREP(BMP380_OSRS_PRESS_MASK, data->oversampling_press);
ret = regmap_update_bits_check(data->regmap, BMP380_REG_OSR,
BMP380_OSRS_TEMP_MASK |
BMP380_OSRS_PRESS_MASK,
osrs, &aux);
if (ret) {
dev_err(data->dev, "failed to write oversampling register\n");
return ret;
}
change = change || aux;
/* Configure output data rate */
ret = regmap_update_bits_check(data->regmap, BMP380_REG_ODR,
BMP380_ODRS_MASK, data->sampling_freq, &aux);
if (ret) {
dev_err(data->dev, "failed to write ODR selection register\n");
return ret;
}
change = change || aux;
/* Set filter data */
ret = regmap_update_bits_check(data->regmap, BMP380_REG_CONFIG, BMP380_FILTER_MASK,
FIELD_PREP(BMP380_FILTER_MASK, data->iir_filter_coeff),
&aux);
if (ret) {
dev_err(data->dev, "failed to write config register\n");
return ret;
}
change = change || aux;
if (change) {
/*
* The configurations errors are detected on the fly during a measurement
* cycle. If the sampling frequency is too low, it's faster to reset
* the measurement loop than wait until the next measurement is due.
*
* Resets sensor measurement loop toggling between sleep and normal
* operating modes.
*/
ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
BMP380_MODE_MASK,
FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_SLEEP));
if (ret) {
dev_err(data->dev, "failed to set sleep mode\n");
return ret;
}
usleep_range(2000, 2500);
ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL,
BMP380_MODE_MASK,
FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_NORMAL));
if (ret) {
dev_err(data->dev, "failed to set normal mode\n");
return ret;
}
/*
* Waits for measurement before checking configuration error flag.
* Selected longest measure time indicated in section 3.9.1
* in the datasheet.
*/
msleep(80);
/* Check config error flag */
ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp);
if (ret) {
dev_err(data->dev,
"failed to read error register\n");
return ret;
}
if (tmp & BMP380_ERR_CONF_MASK) {
dev_warn(data->dev,
"sensor flagged configuration as incompatible\n");
return -EINVAL;
}
}
return 0;
}
static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 };
static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128};
const struct bmp280_chip_info bmp380_chip_info = {
.id_reg = BMP380_REG_ID,
.chip_id = BMP380_CHIP_ID,
.regmap_config = &bmp380_regmap_config,
.start_up_time = 2000,
.channels = bmp380_channels,
.num_channels = 2,
.oversampling_temp_avail = bmp380_oversampling_avail,
.num_oversampling_temp_avail = ARRAY_SIZE(bmp380_oversampling_avail),
.oversampling_temp_default = ilog2(1),
.oversampling_press_avail = bmp380_oversampling_avail,
.num_oversampling_press_avail = ARRAY_SIZE(bmp380_oversampling_avail),
.oversampling_press_default = ilog2(4),
.sampling_freq_avail = bmp380_odr_table,
.num_sampling_freq_avail = ARRAY_SIZE(bmp380_odr_table) * 2,
.sampling_freq_default = BMP380_ODR_50HZ,
.iir_filter_coeffs_avail = bmp380_iir_filter_coeffs_avail,
.num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail),
.iir_filter_coeff_default = 2,
.chip_config = bmp380_chip_config,
.read_temp = bmp380_read_temp,
.read_press = bmp380_read_press,
.read_calib = bmp380_read_calib,
.preinit = bmp380_preinit,
};
EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280);
static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
{
const int conversion_time_max[] = { 4500, 7500, 13500, 25500 };
unsigned int delay_us;
unsigned int ctrl;
int ret;
if (data->use_eoc)
reinit_completion(&data->done);
ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
if (ret)
return ret;
if (data->use_eoc) {
/*
* If we have a completion interrupt, use it, wait up to
* 100ms. The longest conversion time listed is 76.5 ms for
* advanced resolution mode.
*/
ret = wait_for_completion_timeout(&data->done,
1 + msecs_to_jiffies(100));
if (!ret)
dev_err(data->dev, "timeout waiting for completion\n");
} else {
if (FIELD_GET(BMP180_MEAS_CTRL_MASK, ctrl_meas) == BMP180_MEAS_TEMP)
delay_us = 4500;
else
delay_us =
conversion_time_max[data->oversampling_press];
usleep_range(delay_us, delay_us + 1000);
}
ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
if (ret)
return ret;
/* The value of this bit reset to "0" after conversion is complete */
if (ctrl & BMP180_MEAS_SCO)
return -EIO;
return 0;
}
static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
{
int ret;
ret = bmp180_measure(data,
FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_TEMP) |
BMP180_MEAS_SCO);
if (ret)
return ret;
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
&data->be16, sizeof(data->be16));
if (ret)
return ret;
*val = be16_to_cpu(data->be16);
return 0;
}
static int bmp180_read_calib(struct bmp280_data *data)
{
struct bmp180_calib *calib = &data->calib.bmp180;
int ret;
int i;
ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START,
data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
if (ret < 0)
return ret;
/* None of the words has the value 0 or 0xFFFF */
for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) {
if (data->bmp180_cal_buf[i] == cpu_to_be16(0) ||
data->bmp180_cal_buf[i] == cpu_to_be16(0xffff))
return -EIO;
}
/* Toss the calibration data into the entropy pool */
add_device_randomness(data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
calib->AC1 = be16_to_cpu(data->bmp180_cal_buf[AC1]);
calib->AC2 = be16_to_cpu(data->bmp180_cal_buf[AC2]);
calib->AC3 = be16_to_cpu(data->bmp180_cal_buf[AC3]);
calib->AC4 = be16_to_cpu(data->bmp180_cal_buf[AC4]);
calib->AC5 = be16_to_cpu(data->bmp180_cal_buf[AC5]);
calib->AC6 = be16_to_cpu(data->bmp180_cal_buf[AC6]);
calib->B1 = be16_to_cpu(data->bmp180_cal_buf[B1]);
calib->B2 = be16_to_cpu(data->bmp180_cal_buf[B2]);
calib->MB = be16_to_cpu(data->bmp180_cal_buf[MB]);
calib->MC = be16_to_cpu(data->bmp180_cal_buf[MC]);
calib->MD = be16_to_cpu(data->bmp180_cal_buf[MD]);
return 0;
}
/*
* Returns temperature in DegC, resolution is 0.1 DegC.
* t_fine carries fine temperature as global value.
*
* Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
*/
static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
{
struct bmp180_calib *calib = &data->calib.bmp180;
s32 x1, x2;
x1 = ((adc_temp - calib->AC6) * calib->AC5) >> 15;
x2 = (calib->MC << 11) / (x1 + calib->MD);
data->t_fine = x1 + x2;
return (data->t_fine + 8) >> 4;
}
static int bmp180_read_temp(struct bmp280_data *data, int *val)
{
s32 adc_temp, comp_temp;
int ret;
ret = bmp180_read_adc_temp(data, &adc_temp);
if (ret)
return ret;
comp_temp = bmp180_compensate_temp(data, adc_temp);
/*
* val might be NULL if we're called by the read_press routine,
* who only cares about the carry over t_fine value.
*/
if (val) {
*val = comp_temp * 100;
return IIO_VAL_INT;
}
return 0;
}
static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
{
u8 oss = data->oversampling_press;
int ret;
ret = bmp180_measure(data,
FIELD_PREP(BMP180_MEAS_CTRL_MASK, BMP180_MEAS_PRESS) |
FIELD_PREP(BMP180_OSRS_PRESS_MASK, oss) |
BMP180_MEAS_SCO);
if (ret)
return ret;
ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
data->buf, sizeof(data->buf));
if (ret)
return ret;
*val = get_unaligned_be24(data->buf) >> (8 - oss);
return 0;
}
/*
* Returns pressure in Pa, resolution is 1 Pa.
*
* Taken from datasheet, Section 3.5, "Calculating pressure and temperature".
*/
static u32 bmp180_compensate_press(struct bmp280_data *data, s32 adc_press)
{
struct bmp180_calib *calib = &data->calib.bmp180;
s32 oss = data->oversampling_press;
s32 x1, x2, x3, p;
s32 b3, b6;
u32 b4, b7;
b6 = data->t_fine - 4000;
x1 = (calib->B2 * (b6 * b6 >> 12)) >> 11;
x2 = calib->AC2 * b6 >> 11;
x3 = x1 + x2;
b3 = ((((s32)calib->AC1 * 4 + x3) << oss) + 2) / 4;
x1 = calib->AC3 * b6 >> 13;
x2 = (calib->B1 * ((b6 * b6) >> 12)) >> 16;
x3 = (x1 + x2 + 2) >> 2;
b4 = calib->AC4 * (u32)(x3 + 32768) >> 15;
b7 = ((u32)adc_press - b3) * (50000 >> oss);
if (b7 < 0x80000000)
p = (b7 * 2) / b4;
else
p = (b7 / b4) * 2;
x1 = (p >> 8) * (p >> 8);
x1 = (x1 * 3038) >> 16;
x2 = (-7357 * p) >> 16;
return p + ((x1 + x2 + 3791) >> 4);
}
static int bmp180_read_press(struct bmp280_data *data,
int *val, int *val2)
{
u32 comp_press;
s32 adc_press;
int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
ret = bmp180_read_temp(data, NULL);
if (ret)
return ret;
ret = bmp180_read_adc_press(data, &adc_press);
if (ret)
return ret;
comp_press = bmp180_compensate_press(data, adc_press);
*val = comp_press;
*val2 = 1000;
return IIO_VAL_FRACTIONAL;
}
static int bmp180_chip_config(struct bmp280_data *data)
{
return 0;
}
static const int bmp180_oversampling_temp_avail[] = { 1 };
static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
const struct bmp280_chip_info bmp180_chip_info = {
.id_reg = BMP280_REG_ID,
.chip_id = BMP180_CHIP_ID,
.regmap_config = &bmp180_regmap_config,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 2,
.oversampling_temp_avail = bmp180_oversampling_temp_avail,
.num_oversampling_temp_avail =
ARRAY_SIZE(bmp180_oversampling_temp_avail),
.oversampling_temp_default = 0,
.oversampling_press_avail = bmp180_oversampling_press_avail,
.num_oversampling_press_avail =
ARRAY_SIZE(bmp180_oversampling_press_avail),
.oversampling_press_default = BMP180_MEAS_PRESS_8X,
.chip_config = bmp180_chip_config,
.read_temp = bmp180_read_temp,
.read_press = bmp180_read_press,
.read_calib = bmp180_read_calib,
};
EXPORT_SYMBOL_NS(bmp180_chip_info, IIO_BMP280);
static irqreturn_t bmp085_eoc_irq(int irq, void *d)
{
struct bmp280_data *data = d;
complete(&data->done);
return IRQ_HANDLED;
}
static int bmp085_fetch_eoc_irq(struct device *dev,
const char *name,
int irq,
struct bmp280_data *data)
{
unsigned long irq_trig;
int ret;
irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
if (irq_trig != IRQF_TRIGGER_RISING) {
dev_err(dev, "non-rising trigger given for EOC interrupt, trying to enforce it\n");
irq_trig = IRQF_TRIGGER_RISING;
}
init_completion(&data->done);
ret = devm_request_threaded_irq(dev,
irq,
bmp085_eoc_irq,
NULL,
irq_trig,
name,
data);
if (ret) {
/* Bail out without IRQ but keep the driver in place */
dev_err(dev, "unable to request DRDY IRQ\n");
return 0;
}
data->use_eoc = true;
return 0;
}
static void bmp280_pm_disable(void *data)
{
struct device *dev = data;
pm_runtime_get_sync(dev);
pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
}
static void bmp280_regulators_disable(void *data)
{
struct regulator_bulk_data *supplies = data;
regulator_bulk_disable(BMP280_NUM_SUPPLIES, supplies);
}
int bmp280_common_probe(struct device *dev,
struct regmap *regmap,
const struct bmp280_chip_info *chip_info,
const char *name,
int irq)
{
struct iio_dev *indio_dev;
struct bmp280_data *data;
struct gpio_desc *gpiod;
unsigned int chip_id;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
data = iio_priv(indio_dev);
mutex_init(&data->lock);
data->dev = dev;
indio_dev->name = name;
indio_dev->info = &bmp280_info;
indio_dev->modes = INDIO_DIRECT_MODE;
data->chip_info = chip_info;
/* Apply initial values from chip info structure */
indio_dev->channels = chip_info->channels;
indio_dev->num_channels = chip_info->num_channels;
data->oversampling_press = chip_info->oversampling_press_default;
data->oversampling_humid = chip_info->oversampling_humid_default;
data->oversampling_temp = chip_info->oversampling_temp_default;
data->iir_filter_coeff = chip_info->iir_filter_coeff_default;
data->sampling_freq = chip_info->sampling_freq_default;
data->start_up_time = chip_info->start_up_time;
/* Bring up regulators */
regulator_bulk_set_supply_names(data->supplies,
bmp280_supply_names,
BMP280_NUM_SUPPLIES);
ret = devm_regulator_bulk_get(dev,
BMP280_NUM_SUPPLIES, data->supplies);
if (ret) {
dev_err(dev, "failed to get regulators\n");
return ret;
}
ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
if (ret) {
dev_err(dev, "failed to enable regulators\n");
return ret;
}
ret = devm_add_action_or_reset(dev, bmp280_regulators_disable,
data->supplies);
if (ret)
return ret;
/* Wait to make sure we started up properly */
usleep_range(data->start_up_time, data->start_up_time + 100);
/* Bring chip out of reset if there is an assigned GPIO line */
gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
/* Deassert the signal */
if (gpiod) {
dev_info(dev, "release reset\n");
gpiod_set_value(gpiod, 0);
}
data->regmap = regmap;
ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
if (ret < 0)
return ret;
if (chip_id != data->chip_info->chip_id) {
dev_err(dev, "bad chip id: expected %x got %x\n",
data->chip_info->chip_id, chip_id);
return -EINVAL;
}
if (data->chip_info->preinit) {
ret = data->chip_info->preinit(data);
if (ret)
return dev_err_probe(data->dev, ret,
"error running preinit tasks\n");
}
ret = data->chip_info->chip_config(data);
if (ret < 0)
return ret;
dev_set_drvdata(dev, indio_dev);
/*
* Some chips have calibration parameters "programmed into the devices'
* non-volatile memory during production". Let's read them out at probe
* time once. They will not change.
*/
ret = data->chip_info->read_calib(data);
if (ret < 0)
return dev_err_probe(data->dev, ret,
"failed to read calibration coefficients\n");
/*
* Attempt to grab an optional EOC IRQ - only the BMP085 has this
* however as it happens, the BMP085 shares the chip ID of BMP180
* so we look for an IRQ if we have that.
*/
if (irq > 0 || (chip_id == BMP180_CHIP_ID)) {
ret = bmp085_fetch_eoc_irq(dev, name, irq, data);
if (ret)
return ret;
}
/* Enable runtime PM */
pm_runtime_get_noresume(dev);
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
/*
* Set autosuspend to two orders of magnitude larger than the
* start-up time.
*/
pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10);
pm_runtime_use_autosuspend(dev);
pm_runtime_put(dev);
ret = devm_add_action_or_reset(dev, bmp280_pm_disable, dev);
if (ret)
return ret;
return devm_iio_device_register(dev, indio_dev);
}
EXPORT_SYMBOL_NS(bmp280_common_probe, IIO_BMP280);
static int bmp280_runtime_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmp280_data *data = iio_priv(indio_dev);
return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies);
}
static int bmp280_runtime_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct bmp280_data *data = iio_priv(indio_dev);
int ret;
ret = regulator_bulk_enable(BMP280_NUM_SUPPLIES, data->supplies);
if (ret)
return ret;
usleep_range(data->start_up_time, data->start_up_time + 100);
return data->chip_info->chip_config(data);
}
EXPORT_RUNTIME_DEV_PM_OPS(bmp280_dev_pm_ops, bmp280_runtime_suspend,
bmp280_runtime_resume, NULL);
MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
MODULE_DESCRIPTION("Driver for Bosch Sensortec BMP180/BMP280 pressure and temperature sensor");
MODULE_LICENSE("GPL v2");
|