1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
|
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2020 NXP
* Lynx PCS MDIO helpers
*/
#include <linux/mdio.h>
#include <linux/phylink.h>
#include <linux/pcs-lynx.h>
#define SGMII_CLOCK_PERIOD_NS 8 /* PCS is clocked at 125 MHz */
#define LINK_TIMER_VAL(ns) ((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
#define LINK_TIMER_LO 0x12
#define LINK_TIMER_HI 0x13
#define IF_MODE 0x14
#define IF_MODE_SGMII_EN BIT(0)
#define IF_MODE_USE_SGMII_AN BIT(1)
#define IF_MODE_SPEED(x) (((x) << 2) & GENMASK(3, 2))
#define IF_MODE_SPEED_MSK GENMASK(3, 2)
#define IF_MODE_HALF_DUPLEX BIT(4)
struct lynx_pcs {
struct phylink_pcs pcs;
struct mdio_device *mdio;
};
enum sgmii_speed {
SGMII_SPEED_10 = 0,
SGMII_SPEED_100 = 1,
SGMII_SPEED_1000 = 2,
SGMII_SPEED_2500 = 2,
};
#define phylink_pcs_to_lynx(pl_pcs) container_of((pl_pcs), struct lynx_pcs, pcs)
#define lynx_to_phylink_pcs(lynx) (&(lynx)->pcs)
struct mdio_device *lynx_get_mdio_device(struct phylink_pcs *pcs)
{
struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
return lynx->mdio;
}
EXPORT_SYMBOL(lynx_get_mdio_device);
static void lynx_pcs_get_state_usxgmii(struct mdio_device *pcs,
struct phylink_link_state *state)
{
struct mii_bus *bus = pcs->bus;
int addr = pcs->addr;
int status, lpa;
status = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_BMSR);
if (status < 0)
return;
state->link = !!(status & MDIO_STAT1_LSTATUS);
state->an_complete = !!(status & MDIO_AN_STAT1_COMPLETE);
if (!state->link || !state->an_complete)
return;
lpa = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_LPA);
if (lpa < 0)
return;
phylink_decode_usxgmii_word(state, lpa);
}
static void lynx_pcs_get_state_2500basex(struct mdio_device *pcs,
struct phylink_link_state *state)
{
int bmsr, lpa;
bmsr = mdiodev_read(pcs, MII_BMSR);
lpa = mdiodev_read(pcs, MII_LPA);
if (bmsr < 0 || lpa < 0) {
state->link = false;
return;
}
state->link = !!(bmsr & BMSR_LSTATUS);
state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
if (!state->link)
return;
state->speed = SPEED_2500;
state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
state->duplex = DUPLEX_FULL;
}
static void lynx_pcs_get_state(struct phylink_pcs *pcs,
struct phylink_link_state *state)
{
struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
switch (state->interface) {
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_QSGMII:
phylink_mii_c22_pcs_get_state(lynx->mdio, state);
break;
case PHY_INTERFACE_MODE_2500BASEX:
lynx_pcs_get_state_2500basex(lynx->mdio, state);
break;
case PHY_INTERFACE_MODE_USXGMII:
lynx_pcs_get_state_usxgmii(lynx->mdio, state);
break;
case PHY_INTERFACE_MODE_10GBASER:
phylink_mii_c45_pcs_get_state(lynx->mdio, state);
break;
default:
break;
}
dev_dbg(&lynx->mdio->dev,
"mode=%s/%s/%s link=%u an_complete=%u\n",
phy_modes(state->interface),
phy_speed_to_str(state->speed),
phy_duplex_to_str(state->duplex),
state->link, state->an_complete);
}
static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
phy_interface_t interface,
const unsigned long *advertising)
{
int link_timer_ns;
u32 link_timer;
u16 if_mode;
int err;
link_timer_ns = phylink_get_link_timer_ns(interface);
if (link_timer_ns > 0) {
link_timer = LINK_TIMER_VAL(link_timer_ns);
mdiodev_write(pcs, LINK_TIMER_LO, link_timer & 0xffff);
mdiodev_write(pcs, LINK_TIMER_HI, link_timer >> 16);
}
if (interface == PHY_INTERFACE_MODE_1000BASEX) {
if_mode = 0;
} else {
if_mode = IF_MODE_SGMII_EN;
if (mode == MLO_AN_INBAND)
if_mode |= IF_MODE_USE_SGMII_AN;
}
err = mdiodev_modify(pcs, IF_MODE,
IF_MODE_SGMII_EN | IF_MODE_USE_SGMII_AN,
if_mode);
if (err)
return err;
return phylink_mii_c22_pcs_config(pcs, mode, interface, advertising);
}
static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
const unsigned long *advertising)
{
struct mii_bus *bus = pcs->bus;
int addr = pcs->addr;
if (!phylink_autoneg_inband(mode)) {
dev_err(&pcs->dev, "USXGMII only supports in-band AN for now\n");
return -EOPNOTSUPP;
}
/* Configure device ability for the USXGMII Replicator */
return mdiobus_c45_write(bus, addr, MDIO_MMD_VEND2, MII_ADVERTISE,
MDIO_USXGMII_10G | MDIO_USXGMII_LINK |
MDIO_USXGMII_FULL_DUPLEX |
ADVERTISE_SGMII | ADVERTISE_LPACK);
}
static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t ifmode,
const unsigned long *advertising,
bool permit)
{
struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
switch (ifmode) {
case PHY_INTERFACE_MODE_1000BASEX:
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_QSGMII:
return lynx_pcs_config_giga(lynx->mdio, mode, ifmode,
advertising);
case PHY_INTERFACE_MODE_2500BASEX:
if (phylink_autoneg_inband(mode)) {
dev_err(&lynx->mdio->dev,
"AN not supported on 3.125GHz SerDes lane\n");
return -EOPNOTSUPP;
}
break;
case PHY_INTERFACE_MODE_USXGMII:
return lynx_pcs_config_usxgmii(lynx->mdio, mode, advertising);
case PHY_INTERFACE_MODE_10GBASER:
/* Nothing to do here for 10GBASER */
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static void lynx_pcs_an_restart(struct phylink_pcs *pcs)
{
struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
phylink_mii_c22_pcs_an_restart(lynx->mdio);
}
static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
int speed, int duplex)
{
u16 if_mode = 0, sgmii_speed;
/* The PCS needs to be configured manually only
* when not operating on in-band mode
*/
if (mode == MLO_AN_INBAND)
return;
if (duplex == DUPLEX_HALF)
if_mode |= IF_MODE_HALF_DUPLEX;
switch (speed) {
case SPEED_1000:
sgmii_speed = SGMII_SPEED_1000;
break;
case SPEED_100:
sgmii_speed = SGMII_SPEED_100;
break;
case SPEED_10:
sgmii_speed = SGMII_SPEED_10;
break;
case SPEED_UNKNOWN:
/* Silently don't do anything */
return;
default:
dev_err(&pcs->dev, "Invalid PCS speed %d\n", speed);
return;
}
if_mode |= IF_MODE_SPEED(sgmii_speed);
mdiodev_modify(pcs, IF_MODE,
IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
if_mode);
}
/* 2500Base-X is SerDes protocol 7 on Felix and 6 on ENETC. It is a SerDes lane
* clocked at 3.125 GHz which encodes symbols with 8b/10b and does not have
* auto-negotiation of any link parameters. Electrically it is compatible with
* a single lane of XAUI.
* The hardware reference manual wants to call this mode SGMII, but it isn't
* really, since the fundamental features of SGMII:
* - Downgrading the link speed by duplicating symbols
* - Auto-negotiation
* are not there.
* The speed is configured at 1000 in the IF_MODE because the clock frequency
* is actually given by a PLL configured in the Reset Configuration Word (RCW).
* Since there is no difference between fixed speed SGMII w/o AN and 802.3z w/o
* AN, we call this PHY interface type 2500Base-X. In case a PHY negotiates a
* lower link speed on line side, the system-side interface remains fixed at
* 2500 Mbps and we do rate adaptation through pause frames.
*/
static void lynx_pcs_link_up_2500basex(struct mdio_device *pcs,
unsigned int mode,
int speed, int duplex)
{
u16 if_mode = 0;
if (mode == MLO_AN_INBAND) {
dev_err(&pcs->dev, "AN not supported for 2500BaseX\n");
return;
}
if (duplex == DUPLEX_HALF)
if_mode |= IF_MODE_HALF_DUPLEX;
if_mode |= IF_MODE_SPEED(SGMII_SPEED_2500);
mdiodev_modify(pcs, IF_MODE,
IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
if_mode);
}
static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
phy_interface_t interface,
int speed, int duplex)
{
struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
switch (interface) {
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_QSGMII:
lynx_pcs_link_up_sgmii(lynx->mdio, mode, speed, duplex);
break;
case PHY_INTERFACE_MODE_2500BASEX:
lynx_pcs_link_up_2500basex(lynx->mdio, mode, speed, duplex);
break;
case PHY_INTERFACE_MODE_USXGMII:
/* At the moment, only in-band AN is supported for USXGMII
* so nothing to do in link_up
*/
break;
default:
break;
}
}
static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
.pcs_get_state = lynx_pcs_get_state,
.pcs_config = lynx_pcs_config,
.pcs_an_restart = lynx_pcs_an_restart,
.pcs_link_up = lynx_pcs_link_up,
};
struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
{
struct lynx_pcs *lynx;
lynx = kzalloc(sizeof(*lynx), GFP_KERNEL);
if (!lynx)
return NULL;
mdio_device_get(mdio);
lynx->mdio = mdio;
lynx->pcs.ops = &lynx_pcs_phylink_ops;
lynx->pcs.poll = true;
return lynx_to_phylink_pcs(lynx);
}
EXPORT_SYMBOL(lynx_pcs_create);
struct phylink_pcs *lynx_pcs_create_mdiodev(struct mii_bus *bus, int addr)
{
struct mdio_device *mdio;
struct phylink_pcs *pcs;
mdio = mdio_device_create(bus, addr);
if (IS_ERR(mdio))
return ERR_CAST(mdio);
pcs = lynx_pcs_create(mdio);
/* Convert failure to create the PCS to an error pointer, so this
* function has a consistent return value strategy.
*/
if (!pcs)
pcs = ERR_PTR(-ENOMEM);
/* lynx_create() has taken a refcount on the mdiodev if it was
* successful. If lynx_create() fails, this will free the mdio
* device here. In any case, we don't need to hold our reference
* anymore, and putting it here will allow mdio_device_put() in
* lynx_destroy() to automatically free the mdio device.
*/
mdio_device_put(mdio);
return pcs;
}
EXPORT_SYMBOL(lynx_pcs_create_mdiodev);
void lynx_pcs_destroy(struct phylink_pcs *pcs)
{
struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
mdio_device_put(lynx->mdio);
kfree(lynx);
}
EXPORT_SYMBOL(lynx_pcs_destroy);
MODULE_LICENSE("Dual BSD/GPL");
|