summaryrefslogtreecommitdiff
path: root/drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c
blob: d2524b70ea16101cf9463153b48226896922230e (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2018, Broadcom */

/*
 * This module contains USB PHY initialization for power up and S3 resume
 * for newer Synopsys based USB hardware first used on the bcm7216.
 */

#include <linux/delay.h>
#include <linux/io.h>

#include <linux/soc/brcmstb/brcmstb.h>
#include "phy-brcm-usb-init.h"

#define PHY_LOCK_TIMEOUT_MS 200

/* Register definitions for syscon piarbctl registers */
#define PIARBCTL_CAM			0x00
#define PIARBCTL_SPLITTER		0x04
#define PIARBCTL_MISC			0x08
#define   PIARBCTL_MISC_SECURE_MASK			0x80000000
#define   PIARBCTL_MISC_USB_SELECT_MASK			0x40000000
#define   PIARBCTL_MISC_USB_4G_SDRAM_MASK		0x20000000
#define   PIARBCTL_MISC_USB_PRIORITY_MASK		0x000f0000
#define   PIARBCTL_MISC_USB_MEM_PAGE_MASK		0x0000f000
#define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK		0x00000f00
#define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK		0x000000f0
#define   PIARBCTL_MISC_SATA_PRIORITY_MASK		0x0000000f

#define PIARBCTL_MISC_USB_ONLY_MASK		\
	(PIARBCTL_MISC_USB_SELECT_MASK |	\
	 PIARBCTL_MISC_USB_4G_SDRAM_MASK |	\
	 PIARBCTL_MISC_USB_PRIORITY_MASK |	\
	 PIARBCTL_MISC_USB_MEM_PAGE_MASK)

/* Register definitions for the USB CTRL block */
#define USB_CTRL_SETUP			0x00
#define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		0x02000000
#define   USB_CTRL_SETUP_SCB2_EN_MASK			0x00008000
#define   USB_CTRL_SETUP_tca_drv_sel_MASK		0x01000000
#define   USB_CTRL_SETUP_SCB1_EN_MASK			0x00004000
#define   USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK		0x00000200
#define   USB_CTRL_SETUP_IPP_MASK			0x00000020
#define   USB_CTRL_SETUP_IOC_MASK			0x00000010
#define USB_CTRL_USB_PM			0x04
#define   USB_CTRL_USB_PM_USB_PWRDN_MASK		0x80000000
#define   USB_CTRL_USB_PM_SOFT_RESET_MASK		0x40000000
#define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		0x00800000
#define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		0x00400000
#define   USB_CTRL_USB_PM_XHC_PME_EN_MASK		0x00000010
#define   USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK	0x00000008
#define USB_CTRL_USB_PM_STATUS		0x08
#define USB_CTRL_USB_DEVICE_CTL1	0x10
#define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	0x00000003
#define USB_CTRL_TEST_PORT_CTL		0x30
#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK	0x000000ff
#define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK	0x0000002e
#define USB_CTRL_TP_DIAG1		0x34
#define   USB_CTLR_TP_DIAG1_wake_MASK	0x00000002
#define USB_CTRL_CTLR_CSHCR		0x50
#define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK	0x00040000

/* Register definitions for the USB_PHY block in 7211b0 */
#define USB_PHY_PLL_CTL			0x00
#define   USB_PHY_PLL_CTL_PLL_RESETB_MASK		0x40000000
#define USB_PHY_PLL_LDO_CTL		0x08
#define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK		0x00000004
#define   USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK	0x00000002
#define   USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK	0x00000001
#define USB_PHY_UTMI_CTL_1		0x04
#define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	0x00000800
#define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK		0x0000000c
#define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT		2
#define USB_PHY_IDDQ			0x1c
#define   USB_PHY_IDDQ_phy_iddq_MASK			0x00000001
#define USB_PHY_STATUS			0x20
#define   USB_PHY_STATUS_pll_lock_MASK			0x00000001

/* Register definitions for the MDIO registers in the DWC2 block of
 * the 7211b0.
 * NOTE: The PHY's MDIO registers are only accessible through the
 * legacy DesignWare USB controller even though it's not being used.
 */
#define USB_GMDIOCSR	0
#define USB_GMDIOGEN	4

/* Register definitions for the BDC EC block in 7211b0 */
#define BDC_EC_AXIRDA			0x0c
#define   BDC_EC_AXIRDA_RTS_MASK			0xf0000000
#define   BDC_EC_AXIRDA_RTS_SHIFT			28


static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
				  uint8_t addr, uint16_t data)
{
	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];

	addr &= 0x1f; /* 5-bit address */
	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
		;
	brcm_usb_writel(0x59020000 | (addr << 18) | data,
			usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
		;
	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
		;
}

static uint16_t __maybe_unused usb_mdio_read_7211b0(
	struct brcm_usb_init_params *params, uint8_t addr)
{
	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];

	addr &= 0x1f; /* 5-bit address */
	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
		;
	brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
		;
	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
		;
	return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff;
}

static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params)
{
	/* select bank */
	usb_mdio_write_7211b0(params, 0x1f, 0x80a0);

	/* Set the eye */
	usb_mdio_write_7211b0(params, 0x0a, 0xc6a0);
}

static void xhci_soft_reset(struct brcm_usb_init_params *params,
			int on_off)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	/* Assert reset */
	if (on_off)
		USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
	/* De-assert reset */
	else
		USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
}

static void usb_init_ipp(struct brcm_usb_init_params *params)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	u32 reg;
	u32 orig_reg;

	pr_debug("%s\n", __func__);

	orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
	if (params->ipp != 2)
		/* override ipp strap pin (if it exits) */
		reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL));

	/* Override the default OC and PP polarity */
	reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
	if (params->ioc)
		reg |= USB_CTRL_MASK(SETUP, IOC);
	if (params->ipp == 1)
		reg |= USB_CTRL_MASK(SETUP, IPP);
	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));

	/*
	 * If we're changing IPP, make sure power is off long enough
	 * to turn off any connected devices.
	 */
	if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
		msleep(50);
}

static void syscon_piarbctl_init(struct regmap *rmap)
{
	/* Switch from legacy USB OTG controller to new STB USB controller */
	regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK,
			   PIARBCTL_MISC_USB_SELECT_MASK |
			   PIARBCTL_MISC_USB_4G_SDRAM_MASK);
}

static void usb_init_common(struct brcm_usb_init_params *params)
{
	u32 reg;
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	pr_debug("%s\n", __func__);

	if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
		reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
		reg |= params->mode;
		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	}
	switch (params->mode) {
	case USB_CTLR_MODE_HOST:
		USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
		break;
	default:
		USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
		USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB);
		break;
	}
}

static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params,
				   bool enable)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	if (enable)
		USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en);
	else
		USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en);
}

static void usb_wake_enable_7216(struct brcm_usb_init_params *params,
				 bool enable)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	if (enable)
		USB_CTRL_SET(ctrl, USB_PM, XHC_PME_EN);
	else
		USB_CTRL_UNSET(ctrl, USB_PM, XHC_PME_EN);
}

static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
	void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC];
	int timeout_ms = PHY_LOCK_TIMEOUT_MS;
	u32 reg;

	if (params->syscon_piarbctl)
		syscon_piarbctl_init(params->syscon_piarbctl);

	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);

	usb_wake_enable_7211b0(params, false);
	if (!params->wake_enabled) {

		/* undo possible suspend settings */
		brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ);
		reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
		reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK;
		brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);

		/* temporarily enable FSM so PHY comes up properly */
		reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
		reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
		brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
	}

	/* Init the PHY */
	reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK |
		USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK |
		USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);

	/* wait for lock */
	while (timeout_ms-- > 0) {
		reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS);
		if (reg & USB_PHY_STATUS_pll_lock_MASK)
			break;
		usleep_range(1000, 2000);
	}

	/* Set the PHY_MODE */
	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
	reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK;
	reg |= params->mode << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);

	usb_init_common(params);

	/*
	 * The BDC controller will get occasional failures with
	 * the default "Read Transaction Size" of 6 (1024 bytes).
	 * Set it to 4 (256 bytes).
	 */
	if ((params->mode != USB_CTLR_MODE_HOST) && bdc_ec) {
		reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
		reg &= ~BDC_EC_AXIRDA_RTS_MASK;
		reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
		brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA);
	}

	/*
	 * Disable FSM, otherwise the PHY will auto suspend when no
	 * device is connected and will be reset on resume.
	 */
	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
	reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);

	usb2_eye_fix_7211b0(params);
}

static void usb_init_common_7216(struct brcm_usb_init_params *params)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	USB_CTRL_UNSET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);

	/* 1 millisecond - for USB clocks to settle down */
	usleep_range(1000, 2000);

	usb_wake_enable_7216(params, false);
	usb_init_common(params);
}

static void usb_init_xhci(struct brcm_usb_init_params *params)
{
	pr_debug("%s\n", __func__);

	xhci_soft_reset(params, 0);
}

static void usb_uninit_common_7216(struct brcm_usb_init_params *params)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	pr_debug("%s\n", __func__);

	if (!params->wake_enabled) {
		USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);

		/* Switch to using slower clock during suspend to save power */
		USB_CTRL_SET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
	} else {
		usb_wake_enable_7216(params, true);
	}
}

static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
	u32 reg;

	pr_debug("%s\n", __func__);

	if (params->wake_enabled) {
		USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
		usb_wake_enable_7211b0(params, true);
	} else {
		USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
		brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL);
		reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
		reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK;
		brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
		brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK,
				usb_phy + USB_PHY_IDDQ);
	}

}

static void usb_uninit_xhci(struct brcm_usb_init_params *params)
{

	pr_debug("%s\n", __func__);

	if (!params->wake_enabled)
		xhci_soft_reset(params, 1);
}

static int usb_get_dual_select(struct brcm_usb_init_params *params)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	u32 reg = 0;

	pr_debug("%s\n", __func__);

	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
	return reg;
}

static void usb_set_dual_select(struct brcm_usb_init_params *params, int mode)
{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	u32 reg;

	pr_debug("%s\n", __func__);

	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
	reg |= mode;
	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
}

static const struct brcm_usb_init_ops bcm7216_ops = {
	.init_ipp = usb_init_ipp,
	.init_common = usb_init_common_7216,
	.init_xhci = usb_init_xhci,
	.uninit_common = usb_uninit_common_7216,
	.uninit_xhci = usb_uninit_xhci,
	.get_dual_select = usb_get_dual_select,
	.set_dual_select = usb_set_dual_select,
};

static const struct brcm_usb_init_ops bcm7211b0_ops = {
	.init_ipp = usb_init_ipp,
	.init_common = usb_init_common_7211b0,
	.init_xhci = usb_init_xhci,
	.uninit_common = usb_uninit_common_7211b0,
	.uninit_xhci = usb_uninit_xhci,
	.get_dual_select = usb_get_dual_select,
	.set_dual_select = usb_set_dual_select,
};

void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
{

	pr_debug("%s\n", __func__);

	params->family_name = "7216";
	params->ops = &bcm7216_ops;
	params->suspend_with_clocks = true;
}

void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
{

	pr_debug("%s\n", __func__);

	params->family_name = "7211";
	params->ops = &bcm7211b0_ops;
	params->suspend_with_clocks = true;
}