summaryrefslogtreecommitdiff
path: root/drivers/soc/bcm/brcmstb/biuctrl.c
blob: 1467bbd59690a4fc49b51e4c55e9f39569d69083 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
// SPDX-License-Identifier: GPL-2.0-only
/*
 * Broadcom STB SoCs Bus Unit Interface controls
 *
 * Copyright (C) 2015, Broadcom Corporation
 */

#define pr_fmt(fmt)	"brcmstb: " KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/of_address.h>
#include <linux/syscore_ops.h>
#include <linux/soc/brcmstb/brcmstb.h>

#define RACENPREF_MASK			0x3
#define RACPREFINST_SHIFT		0
#define RACENINST_SHIFT			2
#define RACPREFDATA_SHIFT		4
#define RACENDATA_SHIFT			6
#define RAC_CPU_SHIFT			8
#define RACCFG_MASK			0xff
#define DPREF_LINE_2_SHIFT		24
#define DPREF_LINE_2_MASK		0xff

/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
#define RAC_DATA_INST_EN_MASK		(1 << RACPREFINST_SHIFT | \
					 RACENPREF_MASK << RACENINST_SHIFT | \
					 1 << RACPREFDATA_SHIFT | \
					 RACENPREF_MASK << RACENDATA_SHIFT)

#define  CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK	0x70000000
#define CPU_CREDIT_REG_MCPx_READ_CRED_MASK	0xf
#define CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK	0xf
#define CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(x)	((x) * 8)
#define CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(x)	(((x) * 8) + 4)

#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(x)	((x) * 8)
#define CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK		0xff

#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK	0xf
#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK		0xf
#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT	4
#define CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE		BIT(8)

static void __iomem *cpubiuctrl_base;
static bool mcp_wr_pairing_en;
static const int *cpubiuctrl_regs;

enum cpubiuctrl_regs {
	CPU_CREDIT_REG = 0,
	CPU_MCP_FLOW_REG,
	CPU_WRITEBACK_CTRL_REG,
	RAC_CONFIG0_REG,
	RAC_CONFIG1_REG,
	NUM_CPU_BIUCTRL_REGS,
};

static inline u32 cbc_readl(int reg)
{
	int offset = cpubiuctrl_regs[reg];

	if (offset == -1 ||
	    (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
		return (u32)-1;

	return readl_relaxed(cpubiuctrl_base + offset);
}

static inline void cbc_writel(u32 val, int reg)
{
	int offset = cpubiuctrl_regs[reg];

	if (offset == -1 ||
	    (IS_ENABLED(CONFIG_CACHE_B15_RAC) && reg >= RAC_CONFIG0_REG))
		return;

	writel(val, cpubiuctrl_base + offset);
}

static const int b15_cpubiuctrl_regs[] = {
	[CPU_CREDIT_REG] = 0x184,
	[CPU_MCP_FLOW_REG] = -1,
	[CPU_WRITEBACK_CTRL_REG] = -1,
	[RAC_CONFIG0_REG] = -1,
	[RAC_CONFIG1_REG] = -1,
};

/* Odd cases, e.g: 7260A0 */
static const int b53_cpubiuctrl_no_wb_regs[] = {
	[CPU_CREDIT_REG] = 0x0b0,
	[CPU_MCP_FLOW_REG] = 0x0b4,
	[CPU_WRITEBACK_CTRL_REG] = -1,
	[RAC_CONFIG0_REG] = 0x78,
	[RAC_CONFIG1_REG] = 0x7c,
};

static const int b53_cpubiuctrl_regs[] = {
	[CPU_CREDIT_REG] = 0x0b0,
	[CPU_MCP_FLOW_REG] = 0x0b4,
	[CPU_WRITEBACK_CTRL_REG] = 0x22c,
	[RAC_CONFIG0_REG] = 0x78,
	[RAC_CONFIG1_REG] = 0x7c,
};

static const int a72_cpubiuctrl_regs[] = {
	[CPU_CREDIT_REG] = 0x18,
	[CPU_MCP_FLOW_REG] = 0x1c,
	[CPU_WRITEBACK_CTRL_REG] = 0x20,
	[RAC_CONFIG0_REG] = 0x08,
	[RAC_CONFIG1_REG] = 0x0c,
};

static int __init mcp_write_pairing_set(void)
{
	u32 creds = 0;

	if (!cpubiuctrl_base)
		return -1;

	creds = cbc_readl(CPU_CREDIT_REG);
	if (mcp_wr_pairing_en) {
		pr_info("MCP: Enabling write pairing\n");
		cbc_writel(creds | CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
			   CPU_CREDIT_REG);
	} else if (creds & CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK) {
		pr_info("MCP: Disabling write pairing\n");
		cbc_writel(creds & ~CPU_CREDIT_REG_MCPx_WR_PAIRING_EN_MASK,
			   CPU_CREDIT_REG);
	} else {
		pr_info("MCP: Write pairing already disabled\n");
	}

	return 0;
}

static const u32 a72_b53_mach_compat[] = {
	0x7211,
	0x72113,
	0x72116,
	0x7216,
	0x72164,
	0x72165,
	0x7255,
	0x7260,
	0x7268,
	0x7271,
	0x7278,
};

/* The read-ahead cache present in the Brahma-B53 CPU is a special piece of
 * hardware after the integrated L2 cache of the B53 CPU complex whose purpose
 * is to prefetch instruction and/or data with a line size of either 64 bytes
 * or 256 bytes. The rationale is that the data-bus of the CPU interface is
 * optimized for 256-byte transactions, and enabling the read-ahead cache
 * provides a significant performance boost (typically twice the performance
 * for a memcpy benchmark application).
 *
 * The read-ahead cache is transparent for Virtual Address cache maintenance
 * operations: IC IVAU, DC IVAC, DC CVAC, DC CVAU and DC CIVAC.  So no special
 * handling is needed for the DMA API above and beyond what is included in the
 * arm64 implementation.
 *
 * In addition, since the Point of Unification is typically between L1 and L2
 * for the Brahma-B53 processor no special read-ahead cache handling is needed
 * for the IC IALLU and IC IALLUIS cache maintenance operations.
 *
 * However, it is not possible to specify the cache level (L3) for the cache
 * maintenance instructions operating by set/way to operate on the read-ahead
 * cache.  The read-ahead cache will maintain coherency when inner cache lines
 * are cleaned by set/way, but if it is necessary to invalidate inner cache
 * lines by set/way to maintain coherency with system masters operating on
 * shared memory that does not have hardware support for coherency, then it
 * will also be necessary to explicitly invalidate the read-ahead cache.
 */
static void __init a72_b53_rac_enable_all(struct device_node *np)
{
	unsigned int cpu;
	u32 enable = 0, pref_dist, shift;

	if (IS_ENABLED(CONFIG_CACHE_B15_RAC))
		return;

	if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n"))
		return;

	pref_dist = cbc_readl(RAC_CONFIG1_REG);
	for_each_possible_cpu(cpu) {
		shift = cpu * RAC_CPU_SHIFT + RACPREFDATA_SHIFT;
		enable |= RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT);
		if (cpubiuctrl_regs == a72_cpubiuctrl_regs) {
			enable &= ~(RACENPREF_MASK << shift);
			enable |= 3 << shift;
			pref_dist |= 1 << (cpu + DPREF_LINE_2_SHIFT);
		}
	}

	cbc_writel(enable, RAC_CONFIG0_REG);
	cbc_writel(pref_dist, RAC_CONFIG1_REG);

	pr_info("%pOF: Broadcom %s read-ahead cache\n",
		np, cpubiuctrl_regs == a72_cpubiuctrl_regs ?
		"Cortex-A72" : "Brahma-B53");
}

static void __init mcp_a72_b53_set(void)
{
	unsigned int i;
	u32 reg;

	reg = brcmstb_get_family_id();

	for (i = 0; i < ARRAY_SIZE(a72_b53_mach_compat); i++) {
		if (BRCM_ID(reg) == a72_b53_mach_compat[i])
			break;
	}

	if (i == ARRAY_SIZE(a72_b53_mach_compat))
		return;

	/* Set all 3 MCP interfaces to 8 credits */
	reg = cbc_readl(CPU_CREDIT_REG);
	for (i = 0; i < 3; i++) {
		reg &= ~(CPU_CREDIT_REG_MCPx_WRITE_CRED_MASK <<
			 CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i));
		reg &= ~(CPU_CREDIT_REG_MCPx_READ_CRED_MASK <<
			 CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i));
		reg |= 8 << CPU_CREDIT_REG_MCPx_WRITE_CRED_SHIFT(i);
		reg |= 8 << CPU_CREDIT_REG_MCPx_READ_CRED_SHIFT(i);
	}
	cbc_writel(reg, CPU_CREDIT_REG);

	/* Max out the number of in-flight Jwords reads on the MCP interface */
	reg = cbc_readl(CPU_MCP_FLOW_REG);
	for (i = 0; i < 3; i++)
		reg |= CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_MASK <<
			CPU_MCP_FLOW_REG_MCPx_RDBUFF_CRED_SHIFT(i);
	cbc_writel(reg, CPU_MCP_FLOW_REG);

	/* Enable writeback throttling, set timeout to 128 cycles, 256 cycles
	 * threshold
	 */
	reg = cbc_readl(CPU_WRITEBACK_CTRL_REG);
	reg |= CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_ENABLE;
	reg &= ~CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_THRESHOLD_MASK;
	reg &= ~(CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_MASK <<
		 CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT);
	reg |= 8;
	reg |= 7 << CPU_WRITEBACK_CTRL_REG_WB_THROTTLE_TIMEOUT_SHIFT;
	cbc_writel(reg, CPU_WRITEBACK_CTRL_REG);
}

static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
{
	struct device_node *cpu_dn;
	u32 family_id;
	int ret = 0;

	cpubiuctrl_base = of_iomap(np, 0);
	if (!cpubiuctrl_base) {
		pr_err("failed to remap BIU control base\n");
		ret = -ENOMEM;
		goto out;
	}

	mcp_wr_pairing_en = of_property_read_bool(np, "brcm,write-pairing");

	cpu_dn = of_get_cpu_node(0, NULL);
	if (!cpu_dn) {
		pr_err("failed to obtain CPU device node\n");
		ret = -ENODEV;
		goto out;
	}

	if (of_device_is_compatible(cpu_dn, "brcm,brahma-b15"))
		cpubiuctrl_regs = b15_cpubiuctrl_regs;
	else if (of_device_is_compatible(cpu_dn, "brcm,brahma-b53"))
		cpubiuctrl_regs = b53_cpubiuctrl_regs;
	else if (of_device_is_compatible(cpu_dn, "arm,cortex-a72"))
		cpubiuctrl_regs = a72_cpubiuctrl_regs;
	else {
		pr_err("unsupported CPU\n");
		ret = -EINVAL;
	}
	of_node_put(cpu_dn);

	family_id = brcmstb_get_family_id();
	if (BRCM_ID(family_id) == 0x7260 && BRCM_REV(family_id) == 0)
		cpubiuctrl_regs = b53_cpubiuctrl_no_wb_regs;
out:
	of_node_put(np);
	return ret;
}

#ifdef CONFIG_PM_SLEEP
static u32 cpubiuctrl_reg_save[NUM_CPU_BIUCTRL_REGS];

static int brcmstb_cpu_credit_reg_suspend(void)
{
	unsigned int i;

	if (!cpubiuctrl_base)
		return 0;

	for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
		cpubiuctrl_reg_save[i] = cbc_readl(i);

	return 0;
}

static void brcmstb_cpu_credit_reg_resume(void)
{
	unsigned int i;

	if (!cpubiuctrl_base)
		return;

	for (i = 0; i < NUM_CPU_BIUCTRL_REGS; i++)
		cbc_writel(cpubiuctrl_reg_save[i], i);
}

static struct syscore_ops brcmstb_cpu_credit_syscore_ops = {
	.suspend = brcmstb_cpu_credit_reg_suspend,
	.resume = brcmstb_cpu_credit_reg_resume,
};
#endif


static int __init brcmstb_biuctrl_init(void)
{
	struct device_node *np;
	int ret;

	/* We might be running on a multi-platform kernel, don't make this a
	 * fatal error, just bail out early
	 */
	np = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
	if (!np)
		return 0;

	ret = setup_hifcpubiuctrl_regs(np);
	if (ret)
		goto out_put;

	ret = mcp_write_pairing_set();
	if (ret) {
		pr_err("MCP: Unable to disable write pairing!\n");
		goto out_put;
	}

	a72_b53_rac_enable_all(np);
	mcp_a72_b53_set();
#ifdef CONFIG_PM_SLEEP
	register_syscore_ops(&brcmstb_cpu_credit_syscore_ops);
#endif
	ret = 0;
out_put:
	of_node_put(np);
	return ret;
}
early_initcall(brcmstb_biuctrl_init);