1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
|
// SPDX-License-Identifier: GPL-2.0-only
//
// Based on sound/soc/codecs/tlv320aic3x.c by Vladimir Barinov
//
// Copyright (C) 2010 Mistral Solutions Pvt Ltd.
// Author: Shahina Shaik <shahina.s@mistralsolutions.com>
//
// Copyright (C) 2014-2018, Ambarella, Inc.
// Author: Dongge wu <dgwu@ambarella.com>
//
// Copyright (C) 2021 Axis Communications AB
// Author: Ricard Wanderlof <ricardw@axis.com>
//
#include <dt-bindings/sound/tlv320adc3xxx.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/gpio/driver.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/cdev.h>
#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/tlv.h>
#include <sound/initval.h>
/*
* General definitions defining exported functionality.
*/
#define ADC3XXX_MICBIAS_PINS 2
/* Number of GPIO pins exposed via the gpiolib interface */
#define ADC3XXX_GPIOS_MAX 2
#define ADC3XXX_RATES SNDRV_PCM_RATE_8000_96000
#define ADC3XXX_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_3LE | \
SNDRV_PCM_FMTBIT_S32_LE)
/*
* PLL modes, to be used for clk_id for set_sysclk callback.
*
* The default behavior (AUTO) is to take the first matching entry in the clock
* table, which is intended to be the PLL based one if there is more than one.
*
* Setting the clock source using simple-card (clocks or
* system-clock-frequency property) sets clk_id = 0 = ADC3XXX_PLL_AUTO.
*/
#define ADC3XXX_PLL_AUTO 0 /* Use first available mode */
#define ADC3XXX_PLL_ENABLE 1 /* Use PLL for clock generation */
#define ADC3XXX_PLL_BYPASS 2 /* Don't use PLL for clock generation */
/* Register definitions. */
#define ADC3XXX_PAGE_SIZE 128
#define ADC3XXX_REG(page, reg) ((page * ADC3XXX_PAGE_SIZE) + reg)
/*
* Page 0 registers.
*/
#define ADC3XXX_PAGE_SELECT ADC3XXX_REG(0, 0)
#define ADC3XXX_RESET ADC3XXX_REG(0, 1)
/* 2-3 Reserved */
#define ADC3XXX_CLKGEN_MUX ADC3XXX_REG(0, 4)
#define ADC3XXX_PLL_PROG_PR ADC3XXX_REG(0, 5)
#define ADC3XXX_PLL_PROG_J ADC3XXX_REG(0, 6)
#define ADC3XXX_PLL_PROG_D_MSB ADC3XXX_REG(0, 7)
#define ADC3XXX_PLL_PROG_D_LSB ADC3XXX_REG(0, 8)
/* 9-17 Reserved */
#define ADC3XXX_ADC_NADC ADC3XXX_REG(0, 18)
#define ADC3XXX_ADC_MADC ADC3XXX_REG(0, 19)
#define ADC3XXX_ADC_AOSR ADC3XXX_REG(0, 20)
#define ADC3XXX_ADC_IADC ADC3XXX_REG(0, 21)
/* 23-24 Reserved */
#define ADC3XXX_CLKOUT_MUX ADC3XXX_REG(0, 25)
#define ADC3XXX_CLKOUT_M_DIV ADC3XXX_REG(0, 26)
#define ADC3XXX_INTERFACE_CTRL_1 ADC3XXX_REG(0, 27)
#define ADC3XXX_CH_OFFSET_1 ADC3XXX_REG(0, 28)
#define ADC3XXX_INTERFACE_CTRL_2 ADC3XXX_REG(0, 29)
#define ADC3XXX_BCLK_N_DIV ADC3XXX_REG(0, 30)
#define ADC3XXX_INTERFACE_CTRL_3 ADC3XXX_REG(0, 31)
#define ADC3XXX_INTERFACE_CTRL_4 ADC3XXX_REG(0, 32)
#define ADC3XXX_INTERFACE_CTRL_5 ADC3XXX_REG(0, 33)
#define ADC3XXX_I2S_SYNC ADC3XXX_REG(0, 34)
/* 35 Reserved */
#define ADC3XXX_ADC_FLAG ADC3XXX_REG(0, 36)
#define ADC3XXX_CH_OFFSET_2 ADC3XXX_REG(0, 37)
#define ADC3XXX_I2S_TDM_CTRL ADC3XXX_REG(0, 38)
/* 39-41 Reserved */
#define ADC3XXX_INTR_FLAG_1 ADC3XXX_REG(0, 42)
#define ADC3XXX_INTR_FLAG_2 ADC3XXX_REG(0, 43)
/* 44 Reserved */
#define ADC3XXX_INTR_FLAG_ADC1 ADC3XXX_REG(0, 45)
/* 46 Reserved */
#define ADC3XXX_INTR_FLAG_ADC2 ADC3XXX_REG(0, 47)
#define ADC3XXX_INT1_CTRL ADC3XXX_REG(0, 48)
#define ADC3XXX_INT2_CTRL ADC3XXX_REG(0, 49)
/* 50 Reserved */
#define ADC3XXX_GPIO2_CTRL ADC3XXX_REG(0, 51)
#define ADC3XXX_GPIO1_CTRL ADC3XXX_REG(0, 52)
#define ADC3XXX_DOUT_CTRL ADC3XXX_REG(0, 53)
/* 54-56 Reserved */
#define ADC3XXX_SYNC_CTRL_1 ADC3XXX_REG(0, 57)
#define ADC3XXX_SYNC_CTRL_2 ADC3XXX_REG(0, 58)
#define ADC3XXX_CIC_GAIN_CTRL ADC3XXX_REG(0, 59)
/* 60 Reserved */
#define ADC3XXX_PRB_SELECT ADC3XXX_REG(0, 61)
#define ADC3XXX_INST_MODE_CTRL ADC3XXX_REG(0, 62)
/* 63-79 Reserved */
#define ADC3XXX_MIC_POLARITY_CTRL ADC3XXX_REG(0, 80)
#define ADC3XXX_ADC_DIGITAL ADC3XXX_REG(0, 81)
#define ADC3XXX_ADC_FGA ADC3XXX_REG(0, 82)
#define ADC3XXX_LADC_VOL ADC3XXX_REG(0, 83)
#define ADC3XXX_RADC_VOL ADC3XXX_REG(0, 84)
#define ADC3XXX_ADC_PHASE_COMP ADC3XXX_REG(0, 85)
#define ADC3XXX_LEFT_CHN_AGC_1 ADC3XXX_REG(0, 86)
#define ADC3XXX_LEFT_CHN_AGC_2 ADC3XXX_REG(0, 87)
#define ADC3XXX_LEFT_CHN_AGC_3 ADC3XXX_REG(0, 88)
#define ADC3XXX_LEFT_CHN_AGC_4 ADC3XXX_REG(0, 89)
#define ADC3XXX_LEFT_CHN_AGC_5 ADC3XXX_REG(0, 90)
#define ADC3XXX_LEFT_CHN_AGC_6 ADC3XXX_REG(0, 91)
#define ADC3XXX_LEFT_CHN_AGC_7 ADC3XXX_REG(0, 92)
#define ADC3XXX_LEFT_AGC_GAIN ADC3XXX_REG(0, 93)
#define ADC3XXX_RIGHT_CHN_AGC_1 ADC3XXX_REG(0, 94)
#define ADC3XXX_RIGHT_CHN_AGC_2 ADC3XXX_REG(0, 95)
#define ADC3XXX_RIGHT_CHN_AGC_3 ADC3XXX_REG(0, 96)
#define ADC3XXX_RIGHT_CHN_AGC_4 ADC3XXX_REG(0, 97)
#define ADC3XXX_RIGHT_CHN_AGC_5 ADC3XXX_REG(0, 98)
#define ADC3XXX_RIGHT_CHN_AGC_6 ADC3XXX_REG(0, 99)
#define ADC3XXX_RIGHT_CHN_AGC_7 ADC3XXX_REG(0, 100)
#define ADC3XXX_RIGHT_AGC_GAIN ADC3XXX_REG(0, 101)
/* 102-127 Reserved */
/*
* Page 1 registers.
*/
/* 1-25 Reserved */
#define ADC3XXX_DITHER_CTRL ADC3XXX_REG(1, 26)
/* 27-50 Reserved */
#define ADC3XXX_MICBIAS_CTRL ADC3XXX_REG(1, 51)
#define ADC3XXX_LEFT_PGA_SEL_1 ADC3XXX_REG(1, 52)
/* 53 Reserved */
#define ADC3XXX_LEFT_PGA_SEL_2 ADC3XXX_REG(1, 54)
#define ADC3XXX_RIGHT_PGA_SEL_1 ADC3XXX_REG(1, 55)
#define ADC3XXX_RIGHT_PGA_SEL_2 ADC3XXX_REG(1, 57)
#define ADC3XXX_LEFT_APGA_CTRL ADC3XXX_REG(1, 59)
#define ADC3XXX_RIGHT_APGA_CTRL ADC3XXX_REG(1, 60)
#define ADC3XXX_LOW_CURRENT_MODES ADC3XXX_REG(1, 61)
#define ADC3XXX_ANALOG_PGA_FLAGS ADC3XXX_REG(1, 62)
/* 63-127 Reserved */
/*
* Register bits.
*/
/* PLL Enable bits */
#define ADC3XXX_ENABLE_PLL_SHIFT 7
#define ADC3XXX_ENABLE_PLL (1 << ADC3XXX_ENABLE_PLL_SHIFT)
#define ADC3XXX_ENABLE_NADC_SHIFT 7
#define ADC3XXX_ENABLE_NADC (1 << ADC3XXX_ENABLE_NADC_SHIFT)
#define ADC3XXX_ENABLE_MADC_SHIFT 7
#define ADC3XXX_ENABLE_MADC (1 << ADC3XXX_ENABLE_MADC_SHIFT)
#define ADC3XXX_ENABLE_BCLK_SHIFT 7
#define ADC3XXX_ENABLE_BCLK (1 << ADC3XXX_ENABLE_BCLK_SHIFT)
/* Power bits */
#define ADC3XXX_LADC_PWR_ON 0x80
#define ADC3XXX_RADC_PWR_ON 0x40
#define ADC3XXX_SOFT_RESET 0x01
#define ADC3XXX_BCLK_MASTER 0x08
#define ADC3XXX_WCLK_MASTER 0x04
/* Interface register masks */
#define ADC3XXX_FORMAT_MASK 0xc0
#define ADC3XXX_FORMAT_SHIFT 6
#define ADC3XXX_WLENGTH_MASK 0x30
#define ADC3XXX_WLENGTH_SHIFT 4
#define ADC3XXX_CLKDIR_MASK 0x0c
#define ADC3XXX_CLKDIR_SHIFT 2
/* Interface register bit patterns */
#define ADC3XXX_FORMAT_I2S (0 << ADC3XXX_FORMAT_SHIFT)
#define ADC3XXX_FORMAT_DSP (1 << ADC3XXX_FORMAT_SHIFT)
#define ADC3XXX_FORMAT_RJF (2 << ADC3XXX_FORMAT_SHIFT)
#define ADC3XXX_FORMAT_LJF (3 << ADC3XXX_FORMAT_SHIFT)
#define ADC3XXX_IFACE_16BITS (0 << ADC3XXX_WLENGTH_SHIFT)
#define ADC3XXX_IFACE_20BITS (1 << ADC3XXX_WLENGTH_SHIFT)
#define ADC3XXX_IFACE_24BITS (2 << ADC3XXX_WLENGTH_SHIFT)
#define ADC3XXX_IFACE_32BITS (3 << ADC3XXX_WLENGTH_SHIFT)
/* PLL P/R bit offsets */
#define ADC3XXX_PLLP_SHIFT 4
#define ADC3XXX_PLLR_SHIFT 0
#define ADC3XXX_PLL_PR_MASK 0x7f
#define ADC3XXX_PLLJ_MASK 0x3f
#define ADC3XXX_PLLD_MSB_MASK 0x3f
#define ADC3XXX_PLLD_LSB_MASK 0xff
#define ADC3XXX_NADC_MASK 0x7f
#define ADC3XXX_MADC_MASK 0x7f
#define ADC3XXX_AOSR_MASK 0xff
#define ADC3XXX_IADC_MASK 0xff
#define ADC3XXX_BDIV_MASK 0x7f
/* PLL_CLKIN bits */
#define ADC3XXX_PLL_CLKIN_SHIFT 2
#define ADC3XXX_PLL_CLKIN_MCLK 0x0
#define ADC3XXX_PLL_CLKIN_BCLK 0x1
#define ADC3XXX_PLL_CLKIN_ZERO 0x3
/* CODEC_CLKIN bits */
#define ADC3XXX_CODEC_CLKIN_SHIFT 0
#define ADC3XXX_CODEC_CLKIN_MCLK 0x0
#define ADC3XXX_CODEC_CLKIN_BCLK 0x1
#define ADC3XXX_CODEC_CLKIN_PLL_CLK 0x3
#define ADC3XXX_USE_PLL ((ADC3XXX_PLL_CLKIN_MCLK << ADC3XXX_PLL_CLKIN_SHIFT) | \
(ADC3XXX_CODEC_CLKIN_PLL_CLK << ADC3XXX_CODEC_CLKIN_SHIFT))
#define ADC3XXX_NO_PLL ((ADC3XXX_PLL_CLKIN_ZERO << ADC3XXX_PLL_CLKIN_SHIFT) | \
(ADC3XXX_CODEC_CLKIN_MCLK << ADC3XXX_CODEC_CLKIN_SHIFT))
/* Analog PGA control bits */
#define ADC3XXX_LPGA_MUTE 0x80
#define ADC3XXX_RPGA_MUTE 0x80
#define ADC3XXX_LPGA_GAIN_MASK 0x7f
#define ADC3XXX_RPGA_GAIN_MASK 0x7f
/* ADC current modes */
#define ADC3XXX_ADC_LOW_CURR_MODE 0x01
/* Left ADC Input selection bits */
#define ADC3XXX_LCH_SEL1_SHIFT 0
#define ADC3XXX_LCH_SEL2_SHIFT 2
#define ADC3XXX_LCH_SEL3_SHIFT 4
#define ADC3XXX_LCH_SEL4_SHIFT 6
#define ADC3XXX_LCH_SEL1X_SHIFT 0
#define ADC3XXX_LCH_SEL2X_SHIFT 2
#define ADC3XXX_LCH_SEL3X_SHIFT 4
#define ADC3XXX_LCH_COMMON_MODE 0x40
#define ADC3XXX_BYPASS_LPGA 0x80
/* Right ADC Input selection bits */
#define ADC3XXX_RCH_SEL1_SHIFT 0
#define ADC3XXX_RCH_SEL2_SHIFT 2
#define ADC3XXX_RCH_SEL3_SHIFT 4
#define ADC3XXX_RCH_SEL4_SHIFT 6
#define ADC3XXX_RCH_SEL1X_SHIFT 0
#define ADC3XXX_RCH_SEL2X_SHIFT 2
#define ADC3XXX_RCH_SEL3X_SHIFT 4
#define ADC3XXX_RCH_COMMON_MODE 0x40
#define ADC3XXX_BYPASS_RPGA 0x80
/* MICBIAS control bits */
#define ADC3XXX_MICBIAS_MASK 0x2
#define ADC3XXX_MICBIAS1_SHIFT 5
#define ADC3XXX_MICBIAS2_SHIFT 3
#define ADC3XXX_ADC_MAX_VOLUME 64
#define ADC3XXX_ADC_POS_VOL 24
/* GPIO control bits (GPIO1_CTRL and GPIO2_CTRL) */
#define ADC3XXX_GPIO_CTRL_CFG_MASK 0x3c
#define ADC3XXX_GPIO_CTRL_CFG_SHIFT 2
#define ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK 0x01
#define ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_SHIFT 0
#define ADC3XXX_GPIO_CTRL_INPUT_VALUE_MASK 0x02
#define ADC3XXX_GPIO_CTRL_INPUT_VALUE_SHIFT 1
enum adc3xxx_type {
ADC3001 = 0,
ADC3101
};
struct adc3xxx {
struct device *dev;
enum adc3xxx_type type;
struct clk *mclk;
struct regmap *regmap;
struct gpio_desc *rst_pin;
unsigned int pll_mode;
unsigned int sysclk;
unsigned int gpio_cfg[ADC3XXX_GPIOS_MAX]; /* value+1 (0 => not set) */
unsigned int micbias_vg[ADC3XXX_MICBIAS_PINS];
int master;
u8 page_no;
int use_pll;
struct gpio_chip gpio_chip;
};
static const unsigned int adc3xxx_gpio_ctrl_reg[ADC3XXX_GPIOS_MAX] = {
ADC3XXX_GPIO1_CTRL,
ADC3XXX_GPIO2_CTRL
};
static const unsigned int adc3xxx_micbias_shift[ADC3XXX_MICBIAS_PINS] = {
ADC3XXX_MICBIAS1_SHIFT,
ADC3XXX_MICBIAS2_SHIFT
};
static const struct reg_default adc3xxx_defaults[] = {
/* Page 0 */
{ 0, 0x00 }, { 1, 0x00 }, { 2, 0x00 }, { 3, 0x00 },
{ 4, 0x00 }, { 5, 0x11 }, { 6, 0x04 }, { 7, 0x00 },
{ 8, 0x00 }, { 9, 0x00 }, { 10, 0x00 }, { 11, 0x00 },
{ 12, 0x00 }, { 13, 0x00 }, { 14, 0x00 }, { 15, 0x00 },
{ 16, 0x00 }, { 17, 0x00 }, { 18, 0x01 }, { 19, 0x01 },
{ 20, 0x80 }, { 21, 0x80 }, { 22, 0x04 }, { 23, 0x00 },
{ 24, 0x00 }, { 25, 0x00 }, { 26, 0x01 }, { 27, 0x00 },
{ 28, 0x00 }, { 29, 0x02 }, { 30, 0x01 }, { 31, 0x00 },
{ 32, 0x00 }, { 33, 0x10 }, { 34, 0x00 }, { 35, 0x00 },
{ 36, 0x00 }, { 37, 0x00 }, { 38, 0x02 }, { 39, 0x00 },
{ 40, 0x00 }, { 41, 0x00 }, { 42, 0x00 }, { 43, 0x00 },
{ 44, 0x00 }, { 45, 0x00 }, { 46, 0x00 }, { 47, 0x00 },
{ 48, 0x00 }, { 49, 0x00 }, { 50, 0x00 }, { 51, 0x00 },
{ 52, 0x00 }, { 53, 0x12 }, { 54, 0x00 }, { 55, 0x00 },
{ 56, 0x00 }, { 57, 0x00 }, { 58, 0x00 }, { 59, 0x44 },
{ 60, 0x00 }, { 61, 0x01 }, { 62, 0x00 }, { 63, 0x00 },
{ 64, 0x00 }, { 65, 0x00 }, { 66, 0x00 }, { 67, 0x00 },
{ 68, 0x00 }, { 69, 0x00 }, { 70, 0x00 }, { 71, 0x00 },
{ 72, 0x00 }, { 73, 0x00 }, { 74, 0x00 }, { 75, 0x00 },
{ 76, 0x00 }, { 77, 0x00 }, { 78, 0x00 }, { 79, 0x00 },
{ 80, 0x00 }, { 81, 0x00 }, { 82, 0x88 }, { 83, 0x00 },
{ 84, 0x00 }, { 85, 0x00 }, { 86, 0x00 }, { 87, 0x00 },
{ 88, 0x7f }, { 89, 0x00 }, { 90, 0x00 }, { 91, 0x00 },
{ 92, 0x00 }, { 93, 0x00 }, { 94, 0x00 }, { 95, 0x00 },
{ 96, 0x7f }, { 97, 0x00 }, { 98, 0x00 }, { 99, 0x00 },
{ 100, 0x00 }, { 101, 0x00 }, { 102, 0x00 }, { 103, 0x00 },
{ 104, 0x00 }, { 105, 0x00 }, { 106, 0x00 }, { 107, 0x00 },
{ 108, 0x00 }, { 109, 0x00 }, { 110, 0x00 }, { 111, 0x00 },
{ 112, 0x00 }, { 113, 0x00 }, { 114, 0x00 }, { 115, 0x00 },
{ 116, 0x00 }, { 117, 0x00 }, { 118, 0x00 }, { 119, 0x00 },
{ 120, 0x00 }, { 121, 0x00 }, { 122, 0x00 }, { 123, 0x00 },
{ 124, 0x00 }, { 125, 0x00 }, { 126, 0x00 }, { 127, 0x00 },
/* Page 1 */
{ 128, 0x00 }, { 129, 0x00 }, { 130, 0x00 }, { 131, 0x00 },
{ 132, 0x00 }, { 133, 0x00 }, { 134, 0x00 }, { 135, 0x00 },
{ 136, 0x00 }, { 137, 0x00 }, { 138, 0x00 }, { 139, 0x00 },
{ 140, 0x00 }, { 141, 0x00 }, { 142, 0x00 }, { 143, 0x00 },
{ 144, 0x00 }, { 145, 0x00 }, { 146, 0x00 }, { 147, 0x00 },
{ 148, 0x00 }, { 149, 0x00 }, { 150, 0x00 }, { 151, 0x00 },
{ 152, 0x00 }, { 153, 0x00 }, { 154, 0x00 }, { 155, 0x00 },
{ 156, 0x00 }, { 157, 0x00 }, { 158, 0x00 }, { 159, 0x00 },
{ 160, 0x00 }, { 161, 0x00 }, { 162, 0x00 }, { 163, 0x00 },
{ 164, 0x00 }, { 165, 0x00 }, { 166, 0x00 }, { 167, 0x00 },
{ 168, 0x00 }, { 169, 0x00 }, { 170, 0x00 }, { 171, 0x00 },
{ 172, 0x00 }, { 173, 0x00 }, { 174, 0x00 }, { 175, 0x00 },
{ 176, 0x00 }, { 177, 0x00 }, { 178, 0x00 }, { 179, 0x00 },
{ 180, 0xff }, { 181, 0x00 }, { 182, 0x3f }, { 183, 0xff },
{ 184, 0x00 }, { 185, 0x3f }, { 186, 0x00 }, { 187, 0x80 },
{ 188, 0x80 }, { 189, 0x00 }, { 190, 0x00 }, { 191, 0x00 },
};
static bool adc3xxx_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
case ADC3XXX_RESET:
return true;
default:
return false;
}
}
static const struct regmap_range_cfg adc3xxx_ranges[] = {
{
.range_min = 0,
.range_max = 2 * ADC3XXX_PAGE_SIZE,
.selector_reg = ADC3XXX_PAGE_SELECT,
.selector_mask = 0xff,
.selector_shift = 0,
.window_start = 0,
.window_len = ADC3XXX_PAGE_SIZE,
}
};
static const struct regmap_config adc3xxx_regmap = {
.reg_bits = 8,
.val_bits = 8,
.reg_defaults = adc3xxx_defaults,
.num_reg_defaults = ARRAY_SIZE(adc3xxx_defaults),
.volatile_reg = adc3xxx_volatile_reg,
.cache_type = REGCACHE_RBTREE,
.ranges = adc3xxx_ranges,
.num_ranges = ARRAY_SIZE(adc3xxx_ranges),
.max_register = 2 * ADC3XXX_PAGE_SIZE,
};
struct adc3xxx_rate_divs {
u32 mclk;
u32 rate;
u8 pll_p;
u8 pll_r;
u8 pll_j;
u16 pll_d;
u8 nadc;
u8 madc;
u8 aosr;
};
/*
* PLL and Clock settings.
* If p member is 0, PLL is not used.
* The order of the entries in this table have the PLL entries before
* the non-PLL entries, so that the PLL modes are preferred unless
* the PLL mode setting says otherwise.
*/
static const struct adc3xxx_rate_divs adc3xxx_divs[] = {
/* mclk, rate, p, r, j, d, nadc, madc, aosr */
/* 8k rate */
{ 12000000, 8000, 1, 1, 7, 1680, 42, 2, 128 },
{ 12288000, 8000, 1, 1, 7, 0000, 42, 2, 128 },
/* 11.025k rate */
{ 12000000, 11025, 1, 1, 6, 8208, 29, 2, 128 },
/* 16k rate */
{ 12000000, 16000, 1, 1, 7, 1680, 21, 2, 128 },
{ 12288000, 16000, 1, 1, 7, 0000, 21, 2, 128 },
/* 22.05k rate */
{ 12000000, 22050, 1, 1, 7, 560, 15, 2, 128 },
/* 32k rate */
{ 12000000, 32000, 1, 1, 8, 1920, 12, 2, 128 },
{ 12288000, 32000, 1, 1, 8, 0000, 12, 2, 128 },
/* 44.1k rate */
{ 12000000, 44100, 1, 1, 7, 5264, 8, 2, 128 },
/* 48k rate */
{ 12000000, 48000, 1, 1, 7, 1680, 7, 2, 128 },
{ 12288000, 48000, 1, 1, 7, 0000, 7, 2, 128 },
{ 24576000, 48000, 1, 1, 3, 5000, 7, 2, 128 }, /* With PLL */
{ 24576000, 48000, 0, 0, 0, 0000, 2, 2, 128 }, /* Without PLL */
/* 88.2k rate */
{ 12000000, 88200, 1, 1, 7, 5264, 4, 4, 64 },
/* 96k rate */
{ 12000000, 96000, 1, 1, 8, 1920, 4, 4, 64 },
};
static int adc3xxx_get_divs(struct device *dev, int mclk, int rate, int pll_mode)
{
int i;
dev_dbg(dev, "mclk = %d, rate = %d, clock mode %u\n",
mclk, rate, pll_mode);
for (i = 0; i < ARRAY_SIZE(adc3xxx_divs); i++) {
const struct adc3xxx_rate_divs *mode = &adc3xxx_divs[i];
/* Skip this entry if it doesn't fulfill the intended clock
* mode requirement. We consider anything besides the two
* modes below to be the same as ADC3XXX_PLL_AUTO.
*/
if ((pll_mode == ADC3XXX_PLL_BYPASS && mode->pll_p) ||
(pll_mode == ADC3XXX_PLL_ENABLE && !mode->pll_p))
continue;
if (mode->rate == rate && mode->mclk == mclk)
return i;
}
dev_info(dev, "Master clock rate %d and sample rate %d is not supported\n",
mclk, rate);
return -EINVAL;
}
static int adc3xxx_pll_delay(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
/* 10msec delay needed after PLL power-up to allow
* PLL and dividers to stabilize (datasheet p13).
*/
usleep_range(10000, 20000);
return 0;
}
static const char * const adc_softstepping_text[] = { "1 step", "2 step", "off" };
static SOC_ENUM_SINGLE_DECL(adc_softstepping_enum, ADC3XXX_ADC_DIGITAL, 0,
adc_softstepping_text);
static const char * const multiplier_text[] = { "1", "2", "4", "8", "16", "32", "64", "128" };
static SOC_ENUM_SINGLE_DECL(left_agc_attack_mult_enum,
ADC3XXX_LEFT_CHN_AGC_4, 0, multiplier_text);
static SOC_ENUM_SINGLE_DECL(right_agc_attack_mult_enum,
ADC3XXX_RIGHT_CHN_AGC_4, 0, multiplier_text);
static SOC_ENUM_SINGLE_DECL(left_agc_decay_mult_enum,
ADC3XXX_LEFT_CHN_AGC_5, 0, multiplier_text);
static SOC_ENUM_SINGLE_DECL(right_agc_decay_mult_enum,
ADC3XXX_RIGHT_CHN_AGC_5, 0, multiplier_text);
static const char * const dither_dc_offset_text[] = {
"0mV", "15mV", "30mV", "45mV", "60mV", "75mV", "90mV", "105mV",
"-15mV", "-30mV", "-45mV", "-60mV", "-75mV", "-90mV", "-105mV"
};
static const unsigned int dither_dc_offset_values[] = {
0, 1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15
};
static SOC_VALUE_ENUM_DOUBLE_DECL(dither_dc_offset_enum,
ADC3XXX_DITHER_CTRL,
4, 0, 0xf, dither_dc_offset_text,
dither_dc_offset_values);
static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 50, 0);
static const DECLARE_TLV_DB_SCALE(adc_tlv, -1200, 50, 0);
static const DECLARE_TLV_DB_SCALE(adc_fine_tlv, -40, 10, 0);
/* AGC target: 8 values: -5.5, -8, -10, -12, -14, -17, -20, -24 dB */
/* It would be nice to declare these in the order above, but empirically
* TLV_DB_SCALE_ITEM doesn't take lightly to the increment (second) parameter
* being negative, despite there being examples to the contrary in other
* drivers. So declare these in the order from lowest to highest, and
* set the invert flag in the SOC_DOUBLE_R_TLV declaration instead.
*/
static const DECLARE_TLV_DB_RANGE(agc_target_tlv,
0, 0, TLV_DB_SCALE_ITEM(-2400, 0, 0),
1, 3, TLV_DB_SCALE_ITEM(-2000, 300, 0),
4, 6, TLV_DB_SCALE_ITEM(-1200, 200, 0),
7, 7, TLV_DB_SCALE_ITEM(-550, 0, 0));
/* Since the 'disabled' value (mute) is at the highest value in the dB
* range (i.e. just before -32 dB) rather than the lowest, we need to resort
* to using a TLV_DB_RANGE in order to get the mute value in the right place.
*/
static const DECLARE_TLV_DB_RANGE(agc_thresh_tlv,
0, 30, TLV_DB_SCALE_ITEM(-9000, 200, 0),
31, 31, TLV_DB_SCALE_ITEM(0, 0, 1)); /* disabled = mute */
/* AGC hysteresis: 4 values: 1, 2, 4 dB, disabled (= mute) */
static const DECLARE_TLV_DB_RANGE(agc_hysteresis_tlv,
0, 1, TLV_DB_SCALE_ITEM(100, 100, 0),
2, 2, TLV_DB_SCALE_ITEM(400, 0, 0),
3, 3, TLV_DB_SCALE_ITEM(0, 0, 1)); /* disabled = mute */
static const DECLARE_TLV_DB_SCALE(agc_max_tlv, 0, 50, 0);
/* Input attenuation: -6 dB or 0 dB */
static const DECLARE_TLV_DB_SCALE(input_attenuation_tlv, -600, 600, 0);
static const struct snd_kcontrol_new adc3xxx_snd_controls[] = {
SOC_DOUBLE_R_TLV("PGA Capture Volume", ADC3XXX_LEFT_APGA_CTRL,
ADC3XXX_RIGHT_APGA_CTRL, 0, 80, 0, pga_tlv),
SOC_DOUBLE("PGA Capture Switch", ADC3XXX_ADC_FGA, 7, 3, 1, 1),
SOC_DOUBLE_R("AGC Capture Switch", ADC3XXX_LEFT_CHN_AGC_1,
ADC3XXX_RIGHT_CHN_AGC_1, 7, 1, 0),
SOC_DOUBLE_R_TLV("AGC Target Level Capture Volume", ADC3XXX_LEFT_CHN_AGC_1,
ADC3XXX_RIGHT_CHN_AGC_2, 4, 0x07, 1, agc_target_tlv),
SOC_DOUBLE_R_TLV("AGC Noise Threshold Capture Volume", ADC3XXX_LEFT_CHN_AGC_2,
ADC3XXX_RIGHT_CHN_AGC_2, 1, 0x1f, 1, agc_thresh_tlv),
SOC_DOUBLE_R_TLV("AGC Hysteresis Capture Volume", ADC3XXX_LEFT_CHN_AGC_2,
ADC3XXX_RIGHT_CHN_AGC_2, 6, 3, 0, agc_hysteresis_tlv),
SOC_DOUBLE_R("AGC Clip Stepping Capture Switch", ADC3XXX_LEFT_CHN_AGC_2,
ADC3XXX_RIGHT_CHN_AGC_2, 0, 1, 0),
/*
* Oddly enough, the data sheet says the default value
* for the left/right AGC maximum gain register field
* (ADC3XXX_LEFT/RIGHT_CHN_AGC_3 bits 0..6) is 0x7f = 127
* (verified empirically) even though this value (indeed, above
* 0x50) is specified as 'Reserved. Do not use.' in the accompanying
* table in the data sheet.
*/
SOC_DOUBLE_R_TLV("AGC Maximum Capture Volume", ADC3XXX_LEFT_CHN_AGC_3,
ADC3XXX_RIGHT_CHN_AGC_3, 0, 0x50, 0, agc_max_tlv),
SOC_DOUBLE_R("AGC Attack Time", ADC3XXX_LEFT_CHN_AGC_4,
ADC3XXX_RIGHT_CHN_AGC_4, 3, 0x1f, 0),
/* Would like to have the multipliers as LR pairs, but there is
* no SOC_ENUM_foo which accepts two values in separate registers.
*/
SOC_ENUM("AGC Left Attack Time Multiplier", left_agc_attack_mult_enum),
SOC_ENUM("AGC Right Attack Time Multiplier", right_agc_attack_mult_enum),
SOC_DOUBLE_R("AGC Decay Time", ADC3XXX_LEFT_CHN_AGC_5,
ADC3XXX_RIGHT_CHN_AGC_5, 3, 0x1f, 0),
SOC_ENUM("AGC Left Decay Time Multiplier", left_agc_decay_mult_enum),
SOC_ENUM("AGC Right Decay Time Multiplier", right_agc_decay_mult_enum),
SOC_DOUBLE_R("AGC Noise Debounce", ADC3XXX_LEFT_CHN_AGC_6,
ADC3XXX_RIGHT_CHN_AGC_6, 0, 0x1f, 0),
SOC_DOUBLE_R("AGC Signal Debounce", ADC3XXX_LEFT_CHN_AGC_7,
ADC3XXX_RIGHT_CHN_AGC_7, 0, 0x0f, 0),
/* Read only register */
SOC_DOUBLE_R_S_TLV("AGC Applied Capture Volume", ADC3XXX_LEFT_AGC_GAIN,
ADC3XXX_RIGHT_AGC_GAIN, 0, -24, 40, 6, 0, adc_tlv),
/* ADC soft stepping */
SOC_ENUM("ADC Soft Stepping", adc_softstepping_enum),
/* Left/Right Input attenuation */
SOC_SINGLE_TLV("Left Input IN_1L Capture Volume",
ADC3XXX_LEFT_PGA_SEL_1, 0, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Left Input IN_2L Capture Volume",
ADC3XXX_LEFT_PGA_SEL_1, 2, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Left Input IN_3L Capture Volume",
ADC3XXX_LEFT_PGA_SEL_1, 4, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Left Input IN_1R Capture Volume",
ADC3XXX_LEFT_PGA_SEL_2, 0, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Left Input DIF_2L_3L Capture Volume",
ADC3XXX_LEFT_PGA_SEL_1, 6, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Left Input DIF_1L_1R Capture Volume",
ADC3XXX_LEFT_PGA_SEL_2, 4, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Left Input DIF_2R_3R Capture Volume",
ADC3XXX_LEFT_PGA_SEL_2, 2, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Right Input IN_1R Capture Volume",
ADC3XXX_RIGHT_PGA_SEL_1, 0, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Right Input IN_2R Capture Volume",
ADC3XXX_RIGHT_PGA_SEL_1, 2, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Right Input IN_3R Capture Volume",
ADC3XXX_RIGHT_PGA_SEL_1, 4, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Right Input IN_1L Capture Volume",
ADC3XXX_RIGHT_PGA_SEL_2, 0, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Right Input DIF_2R_3R Capture Volume",
ADC3XXX_RIGHT_PGA_SEL_1, 6, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Right Input DIF_1L_1R Capture Volume",
ADC3XXX_RIGHT_PGA_SEL_2, 4, 1, 1, input_attenuation_tlv),
SOC_SINGLE_TLV("Right Input DIF_2L_3L Capture Volume",
ADC3XXX_RIGHT_PGA_SEL_2, 2, 1, 1, input_attenuation_tlv),
SOC_DOUBLE_R_S_TLV("ADC Volume Control Capture Volume", ADC3XXX_LADC_VOL,
ADC3XXX_RADC_VOL, 0, -24, 40, 6, 0, adc_tlv),
/* Empirically, the following doesn't work the way it's supposed
* to. Values 0, -0.1, -0.2 and -0.3 dB result in the same level, and
* -0.4 dB drops about 0.12 dB on a specific chip.
*/
SOC_DOUBLE_TLV("ADC Fine Volume Control Capture Volume", ADC3XXX_ADC_FGA,
4, 0, 4, 1, adc_fine_tlv),
SOC_SINGLE("Left ADC Unselected CM Bias Capture Switch",
ADC3XXX_LEFT_PGA_SEL_2, 6, 1, 0),
SOC_SINGLE("Right ADC Unselected CM Bias Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_2, 6, 1, 0),
SOC_ENUM("Dither Control DC Offset", dither_dc_offset_enum),
};
/* Left input selection, Single Ended inputs and Differential inputs */
static const struct snd_kcontrol_new left_input_mixer_controls[] = {
SOC_DAPM_SINGLE("IN_1L Capture Switch",
ADC3XXX_LEFT_PGA_SEL_1, 1, 0x1, 1),
SOC_DAPM_SINGLE("IN_2L Capture Switch",
ADC3XXX_LEFT_PGA_SEL_1, 3, 0x1, 1),
SOC_DAPM_SINGLE("IN_3L Capture Switch",
ADC3XXX_LEFT_PGA_SEL_1, 5, 0x1, 1),
SOC_DAPM_SINGLE("DIF_2L_3L Capture Switch",
ADC3XXX_LEFT_PGA_SEL_1, 7, 0x1, 1),
SOC_DAPM_SINGLE("DIF_1L_1R Capture Switch",
ADC3XXX_LEFT_PGA_SEL_2, 5, 0x1, 1),
SOC_DAPM_SINGLE("DIF_2R_3R Capture Switch",
ADC3XXX_LEFT_PGA_SEL_2, 3, 0x1, 1),
SOC_DAPM_SINGLE("IN_1R Capture Switch",
ADC3XXX_LEFT_PGA_SEL_2, 1, 0x1, 1),
};
/* Right input selection, Single Ended inputs and Differential inputs */
static const struct snd_kcontrol_new right_input_mixer_controls[] = {
SOC_DAPM_SINGLE("IN_1R Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_1, 1, 0x1, 1),
SOC_DAPM_SINGLE("IN_2R Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_1, 3, 0x1, 1),
SOC_DAPM_SINGLE("IN_3R Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_1, 5, 0x1, 1),
SOC_DAPM_SINGLE("DIF_2R_3R Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_1, 7, 0x1, 1),
SOC_DAPM_SINGLE("DIF_1L_1R Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_2, 5, 0x1, 1),
SOC_DAPM_SINGLE("DIF_2L_3L Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_2, 3, 0x1, 1),
SOC_DAPM_SINGLE("IN_1L Capture Switch",
ADC3XXX_RIGHT_PGA_SEL_2, 1, 0x1, 1),
};
/* Left Digital Mic input for left ADC */
static const struct snd_kcontrol_new left_input_dmic_controls[] = {
SOC_DAPM_SINGLE("Left ADC Capture Switch",
ADC3XXX_ADC_DIGITAL, 3, 0x1, 0),
};
/* Right Digital Mic input for Right ADC */
static const struct snd_kcontrol_new right_input_dmic_controls[] = {
SOC_DAPM_SINGLE("Right ADC Capture Switch",
ADC3XXX_ADC_DIGITAL, 2, 0x1, 0),
};
/* DAPM widgets */
static const struct snd_soc_dapm_widget adc3xxx_dapm_widgets[] = {
/* Left Input Selection */
SND_SOC_DAPM_MIXER("Left Input", SND_SOC_NOPM, 0, 0,
&left_input_mixer_controls[0],
ARRAY_SIZE(left_input_mixer_controls)),
/* Right Input Selection */
SND_SOC_DAPM_MIXER("Right Input", SND_SOC_NOPM, 0, 0,
&right_input_mixer_controls[0],
ARRAY_SIZE(right_input_mixer_controls)),
/* PGA selection */
SND_SOC_DAPM_PGA("Left PGA", ADC3XXX_LEFT_APGA_CTRL, 7, 1, NULL, 0),
SND_SOC_DAPM_PGA("Right PGA", ADC3XXX_RIGHT_APGA_CTRL, 7, 1, NULL, 0),
/* Digital Microphone Input Control for Left/Right ADC */
SND_SOC_DAPM_MIXER("Left DMic Input", SND_SOC_NOPM, 0, 0,
&left_input_dmic_controls[0],
ARRAY_SIZE(left_input_dmic_controls)),
SND_SOC_DAPM_MIXER("Right DMic Input", SND_SOC_NOPM, 0, 0,
&right_input_dmic_controls[0],
ARRAY_SIZE(right_input_dmic_controls)),
/* Left/Right ADC */
SND_SOC_DAPM_ADC("Left ADC", "Left Capture", ADC3XXX_ADC_DIGITAL, 7, 0),
SND_SOC_DAPM_ADC("Right ADC", "Right Capture", ADC3XXX_ADC_DIGITAL, 6, 0),
/* Inputs */
SND_SOC_DAPM_INPUT("IN_1L"),
SND_SOC_DAPM_INPUT("IN_1R"),
SND_SOC_DAPM_INPUT("IN_2L"),
SND_SOC_DAPM_INPUT("IN_2R"),
SND_SOC_DAPM_INPUT("IN_3L"),
SND_SOC_DAPM_INPUT("IN_3R"),
SND_SOC_DAPM_INPUT("DIFL_1L_1R"),
SND_SOC_DAPM_INPUT("DIFL_2L_3L"),
SND_SOC_DAPM_INPUT("DIFL_2R_3R"),
SND_SOC_DAPM_INPUT("DIFR_1L_1R"),
SND_SOC_DAPM_INPUT("DIFR_2L_3L"),
SND_SOC_DAPM_INPUT("DIFR_2R_3R"),
SND_SOC_DAPM_INPUT("DMic_L"),
SND_SOC_DAPM_INPUT("DMic_R"),
/* Digital audio interface output */
SND_SOC_DAPM_AIF_OUT("AIF_OUT", "Capture", 0, SND_SOC_NOPM, 0, 0),
/* Clocks */
SND_SOC_DAPM_SUPPLY("PLL_CLK", ADC3XXX_PLL_PROG_PR, ADC3XXX_ENABLE_PLL_SHIFT,
0, adc3xxx_pll_delay, SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_SUPPLY("ADC_CLK", ADC3XXX_ADC_NADC, ADC3XXX_ENABLE_NADC_SHIFT,
0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC_MOD_CLK", ADC3XXX_ADC_MADC, ADC3XXX_ENABLE_MADC_SHIFT,
0, NULL, 0),
/* This refers to the generated BCLK in master mode. */
SND_SOC_DAPM_SUPPLY("BCLK", ADC3XXX_BCLK_N_DIV, ADC3XXX_ENABLE_BCLK_SHIFT,
0, NULL, 0),
};
static const struct snd_soc_dapm_route adc3xxx_intercon[] = {
/* Left input selection from switches */
{ "Left Input", "IN_1L Capture Switch", "IN_1L" },
{ "Left Input", "IN_2L Capture Switch", "IN_2L" },
{ "Left Input", "IN_3L Capture Switch", "IN_3L" },
{ "Left Input", "DIF_2L_3L Capture Switch", "DIFL_2L_3L" },
{ "Left Input", "DIF_1L_1R Capture Switch", "DIFL_1L_1R" },
{ "Left Input", "DIF_2R_3R Capture Switch", "DIFL_2R_3R" },
{ "Left Input", "IN_1R Capture Switch", "IN_1R" },
/* Left input selection to left PGA */
{ "Left PGA", NULL, "Left Input" },
/* Left PGA to left ADC */
{ "Left ADC", NULL, "Left PGA" },
/* Right input selection from switches */
{ "Right Input", "IN_1R Capture Switch", "IN_1R" },
{ "Right Input", "IN_2R Capture Switch", "IN_2R" },
{ "Right Input", "IN_3R Capture Switch", "IN_3R" },
{ "Right Input", "DIF_2R_3R Capture Switch", "DIFR_2R_3R" },
{ "Right Input", "DIF_1L_1R Capture Switch", "DIFR_1L_1R" },
{ "Right Input", "DIF_2L_3L Capture Switch", "DIFR_2L_3L" },
{ "Right Input", "IN_1L Capture Switch", "IN_1L" },
/* Right input selection to right PGA */
{ "Right PGA", NULL, "Right Input" },
/* Right PGA to right ADC */
{ "Right ADC", NULL, "Right PGA" },
/* Left DMic Input selection from switch */
{ "Left DMic Input", "Left ADC Capture Switch", "DMic_L" },
/* Left DMic to left ADC */
{ "Left ADC", NULL, "Left DMic Input" },
/* Right DMic Input selection from switch */
{ "Right DMic Input", "Right ADC Capture Switch", "DMic_R" },
/* Right DMic to right ADC */
{ "Right ADC", NULL, "Right DMic Input" },
/* ADC to AIF output */
{ "AIF_OUT", NULL, "Left ADC" },
{ "AIF_OUT", NULL, "Right ADC" },
/* Clocking */
{ "ADC_MOD_CLK", NULL, "ADC_CLK" },
{ "Left ADC", NULL, "ADC_MOD_CLK" },
{ "Right ADC", NULL, "ADC_MOD_CLK" },
{ "BCLK", NULL, "ADC_CLK" },
};
static const struct snd_soc_dapm_route adc3xxx_pll_intercon[] = {
{ "ADC_CLK", NULL, "PLL_CLK" },
};
static const struct snd_soc_dapm_route adc3xxx_bclk_out_intercon[] = {
{ "AIF_OUT", NULL, "BCLK" }
};
static int adc3xxx_gpio_request(struct gpio_chip *chip, unsigned int offset)
{
struct adc3xxx *adc3xxx = gpiochip_get_data(chip);
if (offset >= ADC3XXX_GPIOS_MAX)
return -EINVAL;
/* GPIO1 is offset 0, GPIO2 is offset 1 */
/* We check here that the GPIO pins are either not configured in the
* DT, or that they purposely are set as outputs.
* (Input mode not yet implemented).
*/
if (adc3xxx->gpio_cfg[offset] != 0 &&
adc3xxx->gpio_cfg[offset] != ADC3XXX_GPIO_GPO + 1)
return -EINVAL;
return 0;
}
static int adc3xxx_gpio_direction_out(struct gpio_chip *chip,
unsigned int offset, int value)
{
struct adc3xxx *adc3xxx = gpiochip_get_data(chip);
/* Set GPIO output function. */
return regmap_update_bits(adc3xxx->regmap,
adc3xxx_gpio_ctrl_reg[offset],
ADC3XXX_GPIO_CTRL_CFG_MASK |
ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK,
ADC3XXX_GPIO_GPO << ADC3XXX_GPIO_CTRL_CFG_SHIFT |
!!value << ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_SHIFT);
}
/* With only GPIO outputs configured, we never get the .direction_out call,
* so we set the output mode and output value in the same call. Hence
* .set in practice does the same thing as .direction_out .
*/
static void adc3xxx_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
(void) adc3xxx_gpio_direction_out(chip, offset, value);
}
/* Even though we only support GPIO output for now, some GPIO clients
* want to read the current pin state using the .get callback.
*/
static int adc3xxx_gpio_get(struct gpio_chip *chip, unsigned int offset)
{
struct adc3xxx *adc3xxx = gpiochip_get_data(chip);
unsigned int regval;
int ret;
/* We only allow output pins, so just read the value set in the output
* pin register field.
*/
ret = regmap_read(adc3xxx->regmap, adc3xxx_gpio_ctrl_reg[offset], ®val);
if (ret)
return ret;
return !!(regval & ADC3XXX_GPIO_CTRL_OUTPUT_CTRL_MASK);
}
static const struct gpio_chip adc3xxx_gpio_chip = {
.label = "adc3xxx",
.owner = THIS_MODULE,
.request = adc3xxx_gpio_request,
.direction_output = adc3xxx_gpio_direction_out,
.set = adc3xxx_gpio_set,
.get = adc3xxx_gpio_get,
.can_sleep = 1,
};
static void adc3xxx_free_gpio(struct adc3xxx *adc3xxx)
{
gpiochip_remove(&adc3xxx->gpio_chip);
}
static void adc3xxx_init_gpio(struct adc3xxx *adc3xxx)
{
int gpio, micbias;
int ret;
adc3xxx->gpio_chip = adc3xxx_gpio_chip;
adc3xxx->gpio_chip.ngpio = ADC3XXX_GPIOS_MAX;
adc3xxx->gpio_chip.parent = adc3xxx->dev;
adc3xxx->gpio_chip.base = -1;
ret = gpiochip_add_data(&adc3xxx->gpio_chip, adc3xxx);
if (ret)
dev_err(adc3xxx->dev, "Failed to add gpios: %d\n", ret);
/* Set up potential GPIO configuration from the devicetree.
* This allows us to set up things which are not software
* controllable GPIOs, such as PDM microphone I/O,
*/
for (gpio = 0; gpio < ADC3XXX_GPIOS_MAX; gpio++) {
unsigned int cfg = adc3xxx->gpio_cfg[gpio];
if (cfg) {
cfg--; /* actual value to use is stored +1 */
regmap_update_bits(adc3xxx->regmap,
adc3xxx_gpio_ctrl_reg[gpio],
ADC3XXX_GPIO_CTRL_CFG_MASK,
cfg << ADC3XXX_GPIO_CTRL_CFG_SHIFT);
}
}
/* Set up micbias voltage */
for (micbias = 0; micbias < ADC3XXX_MICBIAS_PINS; micbias++) {
unsigned int vg = adc3xxx->micbias_vg[micbias];
regmap_update_bits(adc3xxx->regmap,
ADC3XXX_MICBIAS_CTRL,
ADC3XXX_MICBIAS_MASK << adc3xxx_micbias_shift[micbias],
vg << adc3xxx_micbias_shift[micbias]);
}
}
static int adc3xxx_parse_dt_gpio(struct adc3xxx *adc3xxx,
const char *propname, unsigned int *cfg)
{
struct device *dev = adc3xxx->dev;
struct device_node *np = dev->of_node;
unsigned int val;
if (!of_property_read_u32(np, propname, &val)) {
if (val & ~15 || val == 7 || val >= 11) {
dev_err(dev, "Invalid property value for '%s'\n", propname);
return -EINVAL;
}
if (val == ADC3XXX_GPIO_GPI)
dev_warn(dev, "GPIO Input read not yet implemented\n");
*cfg = val + 1; /* 0 => not set up, all others shifted +1 */
}
return 0;
}
static int adc3xxx_parse_dt_micbias(struct adc3xxx *adc3xxx,
const char *propname, unsigned int *vg)
{
struct device *dev = adc3xxx->dev;
struct device_node *np = dev->of_node;
unsigned int val;
if (!of_property_read_u32(np, propname, &val)) {
if (val >= ADC3XXX_MICBIAS_AVDD) {
dev_err(dev, "Invalid property value for '%s'\n", propname);
return -EINVAL;
}
*vg = val;
}
return 0;
}
static int adc3xxx_parse_pll_mode(uint32_t val, unsigned int *pll_mode)
{
if (val != ADC3XXX_PLL_ENABLE && val != ADC3XXX_PLL_BYPASS &&
val != ADC3XXX_PLL_AUTO)
return -EINVAL;
*pll_mode = val;
return 0;
}
static void adc3xxx_setup_pll(struct snd_soc_component *component,
int div_entry)
{
int i = div_entry;
/* P & R values */
snd_soc_component_write(component, ADC3XXX_PLL_PROG_PR,
(adc3xxx_divs[i].pll_p << ADC3XXX_PLLP_SHIFT) |
(adc3xxx_divs[i].pll_r << ADC3XXX_PLLR_SHIFT));
/* J value */
snd_soc_component_write(component, ADC3XXX_PLL_PROG_J,
adc3xxx_divs[i].pll_j & ADC3XXX_PLLJ_MASK);
/* D value */
snd_soc_component_write(component, ADC3XXX_PLL_PROG_D_LSB,
adc3xxx_divs[i].pll_d & ADC3XXX_PLLD_LSB_MASK);
snd_soc_component_write(component, ADC3XXX_PLL_PROG_D_MSB,
(adc3xxx_divs[i].pll_d >> 8) & ADC3XXX_PLLD_MSB_MASK);
}
static int adc3xxx_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_component *component = dai->component;
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(dai->component);
struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component);
int i, width = 16;
u8 iface_len, bdiv;
i = adc3xxx_get_divs(component->dev, adc3xxx->sysclk,
params_rate(params), adc3xxx->pll_mode);
if (i < 0)
return i;
/* select data word length */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
iface_len = ADC3XXX_IFACE_16BITS;
width = 16;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
iface_len = ADC3XXX_IFACE_20BITS;
width = 20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
iface_len = ADC3XXX_IFACE_24BITS;
width = 24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
iface_len = ADC3XXX_IFACE_32BITS;
width = 32;
break;
default:
dev_err(component->dev, "Unsupported serial data format\n");
return -EINVAL;
}
snd_soc_component_update_bits(component, ADC3XXX_INTERFACE_CTRL_1,
ADC3XXX_WLENGTH_MASK, iface_len);
if (adc3xxx_divs[i].pll_p) { /* If PLL used for this mode */
adc3xxx_setup_pll(component, i);
snd_soc_component_write(component, ADC3XXX_CLKGEN_MUX, ADC3XXX_USE_PLL);
if (!adc3xxx->use_pll) {
snd_soc_dapm_add_routes(dapm, adc3xxx_pll_intercon,
ARRAY_SIZE(adc3xxx_pll_intercon));
adc3xxx->use_pll = 1;
}
} else {
snd_soc_component_write(component, ADC3XXX_CLKGEN_MUX, ADC3XXX_NO_PLL);
if (adc3xxx->use_pll) {
snd_soc_dapm_del_routes(dapm, adc3xxx_pll_intercon,
ARRAY_SIZE(adc3xxx_pll_intercon));
adc3xxx->use_pll = 0;
}
}
/* NADC */
snd_soc_component_update_bits(component, ADC3XXX_ADC_NADC,
ADC3XXX_NADC_MASK, adc3xxx_divs[i].nadc);
/* MADC */
snd_soc_component_update_bits(component, ADC3XXX_ADC_MADC,
ADC3XXX_MADC_MASK, adc3xxx_divs[i].madc);
/* AOSR */
snd_soc_component_update_bits(component, ADC3XXX_ADC_AOSR,
ADC3XXX_AOSR_MASK, adc3xxx_divs[i].aosr);
/* BDIV N Value */
/* BCLK is (by default) set up to be derived from ADC_CLK */
bdiv = (adc3xxx_divs[i].aosr * adc3xxx_divs[i].madc) / (2 * width);
snd_soc_component_update_bits(component, ADC3XXX_BCLK_N_DIV,
ADC3XXX_BDIV_MASK, bdiv);
return 0;
}
static const char *adc3xxx_pll_mode_text(int pll_mode)
{
switch (pll_mode) {
case ADC3XXX_PLL_AUTO:
return "PLL auto";
case ADC3XXX_PLL_ENABLE:
return "PLL enable";
case ADC3XXX_PLL_BYPASS:
return "PLL bypass";
default:
break;
}
return "PLL unknown";
}
static int adc3xxx_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_component *component = codec_dai->component;
struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component);
int ret;
ret = adc3xxx_parse_pll_mode(clk_id, &adc3xxx->pll_mode);
if (ret < 0)
return ret;
adc3xxx->sysclk = freq;
dev_dbg(component->dev, "Set sysclk to %u Hz, %s\n",
freq, adc3xxx_pll_mode_text(adc3xxx->pll_mode));
return 0;
}
static int adc3xxx_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
{
struct snd_soc_component *component = codec_dai->component;
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
struct adc3xxx *adc3xxx = snd_soc_component_get_drvdata(component);
u8 clkdir = 0, format = 0;
int master = 0;
int ret;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBP_CFP:
master = 1;
clkdir = ADC3XXX_BCLK_MASTER | ADC3XXX_WCLK_MASTER;
break;
case SND_SOC_DAIFMT_CBC_CFC:
master = 0;
break;
default:
dev_err(component->dev, "Invalid DAI clock setup\n");
return -EINVAL;
}
/*
* match both interface format and signal polarities since they
* are fixed
*/
switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_INV_MASK)) {
case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF:
format = ADC3XXX_FORMAT_I2S;
break;
case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF:
format = ADC3XXX_FORMAT_DSP;
break;
case SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF:
format = ADC3XXX_FORMAT_DSP;
break;
case SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF:
format = ADC3XXX_FORMAT_RJF;
break;
case SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF:
format = ADC3XXX_FORMAT_LJF;
break;
default:
dev_err(component->dev, "Invalid DAI format\n");
return -EINVAL;
}
/* Add/del route enabling BCLK output as applicable */
if (master && !adc3xxx->master)
snd_soc_dapm_add_routes(dapm, adc3xxx_bclk_out_intercon,
ARRAY_SIZE(adc3xxx_bclk_out_intercon));
else if (!master && adc3xxx->master)
snd_soc_dapm_del_routes(dapm, adc3xxx_bclk_out_intercon,
ARRAY_SIZE(adc3xxx_bclk_out_intercon));
adc3xxx->master = master;
/* set clock direction and format */
ret = snd_soc_component_update_bits(component,
ADC3XXX_INTERFACE_CTRL_1,
ADC3XXX_CLKDIR_MASK | ADC3XXX_FORMAT_MASK,
clkdir | format);
if (ret < 0)
return ret;
return 0;
}
static const struct snd_soc_dai_ops adc3xxx_dai_ops = {
.hw_params = adc3xxx_hw_params,
.set_sysclk = adc3xxx_set_dai_sysclk,
.set_fmt = adc3xxx_set_dai_fmt,
};
static struct snd_soc_dai_driver adc3xxx_dai = {
.name = "tlv320adc3xxx-hifi",
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = ADC3XXX_RATES,
.formats = ADC3XXX_FORMATS,
},
.ops = &adc3xxx_dai_ops,
};
static const struct snd_soc_component_driver soc_component_dev_adc3xxx = {
.controls = adc3xxx_snd_controls,
.num_controls = ARRAY_SIZE(adc3xxx_snd_controls),
.dapm_widgets = adc3xxx_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(adc3xxx_dapm_widgets),
.dapm_routes = adc3xxx_intercon,
.num_dapm_routes = ARRAY_SIZE(adc3xxx_intercon),
};
static int adc3xxx_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct device *dev = &i2c->dev;
struct adc3xxx *adc3xxx = NULL;
int ret;
adc3xxx = devm_kzalloc(dev, sizeof(struct adc3xxx), GFP_KERNEL);
if (!adc3xxx)
return -ENOMEM;
adc3xxx->dev = dev;
adc3xxx->rst_pin = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(adc3xxx->rst_pin)) {
return dev_err_probe(dev, PTR_ERR(adc3xxx->rst_pin),
"Failed to request rst_pin\n");
}
adc3xxx->mclk = devm_clk_get(dev, NULL);
if (IS_ERR(adc3xxx->mclk)) {
/*
* The chip itself supports running off the BCLK either
* directly or via the PLL, but the driver does not (yet), so
* having a specified mclk is required. Otherwise, we could
* use the lack of a clocks property to indicate when BCLK is
* intended as the clock source.
*/
return dev_err_probe(dev, PTR_ERR(adc3xxx->mclk),
"Failed to acquire MCLK\n");
} else if (adc3xxx->mclk) {
ret = clk_prepare_enable(adc3xxx->mclk);
if (ret < 0)
return ret;
dev_dbg(dev, "Enabled MCLK, freq %lu Hz\n", clk_get_rate(adc3xxx->mclk));
}
ret = adc3xxx_parse_dt_gpio(adc3xxx, "ti,dmdin-gpio1", &adc3xxx->gpio_cfg[0]);
if (ret < 0)
goto err_unprepare_mclk;
ret = adc3xxx_parse_dt_gpio(adc3xxx, "ti,dmclk-gpio2", &adc3xxx->gpio_cfg[1]);
if (ret < 0)
goto err_unprepare_mclk;
ret = adc3xxx_parse_dt_micbias(adc3xxx, "ti,micbias1-vg", &adc3xxx->micbias_vg[0]);
if (ret < 0)
goto err_unprepare_mclk;
ret = adc3xxx_parse_dt_micbias(adc3xxx, "ti,micbias2-vg", &adc3xxx->micbias_vg[1]);
if (ret < 0)
goto err_unprepare_mclk;
adc3xxx->regmap = devm_regmap_init_i2c(i2c, &adc3xxx_regmap);
if (IS_ERR(adc3xxx->regmap)) {
ret = PTR_ERR(adc3xxx->regmap);
goto err_unprepare_mclk;
}
i2c_set_clientdata(i2c, adc3xxx);
adc3xxx->type = id->driver_data;
/* Reset codec chip */
gpiod_set_value_cansleep(adc3xxx->rst_pin, 1);
usleep_range(2000, 100000); /* Requirement: > 10 ns (datasheet p13) */
gpiod_set_value_cansleep(adc3xxx->rst_pin, 0);
/* Potentially set up pins used as GPIOs */
adc3xxx_init_gpio(adc3xxx);
ret = snd_soc_register_component(dev,
&soc_component_dev_adc3xxx, &adc3xxx_dai, 1);
if (ret < 0) {
dev_err(dev, "Failed to register codec: %d\n", ret);
goto err_unprepare_mclk;
}
return 0;
err_unprepare_mclk:
clk_disable_unprepare(adc3xxx->mclk);
return ret;
}
static int __exit adc3xxx_i2c_remove(struct i2c_client *client)
{
struct adc3xxx *adc3xxx = i2c_get_clientdata(client);
if (adc3xxx->mclk)
clk_disable_unprepare(adc3xxx->mclk);
adc3xxx_free_gpio(adc3xxx);
snd_soc_unregister_component(&client->dev);
return 0;
}
static const struct of_device_id tlv320adc3xxx_of_match[] = {
{ .compatible = "ti,tlv320adc3001", },
{ .compatible = "ti,tlv320adc3101", },
{},
};
MODULE_DEVICE_TABLE(of, tlv320adc3xxx_of_match);
static const struct i2c_device_id adc3xxx_i2c_id[] = {
{ "tlv320adc3001", ADC3001 },
{ "tlv320adc3101", ADC3101 },
{}
};
MODULE_DEVICE_TABLE(i2c, adc3xxx_i2c_id);
static struct i2c_driver adc3xxx_i2c_driver = {
.driver = {
.name = "tlv320adc3xxx-codec",
.of_match_table = tlv320adc3xxx_of_match,
},
.probe = adc3xxx_i2c_probe,
.remove = adc3xxx_i2c_remove,
.id_table = adc3xxx_i2c_id,
};
module_i2c_driver(adc3xxx_i2c_driver);
MODULE_DESCRIPTION("ASoC TLV320ADC3xxx codec driver");
MODULE_AUTHOR("shahina.s@mistralsolutions.com");
MODULE_LICENSE("GPL v2");
|