phy: rockchip: inno-usb2: fix phy reg=0 case

The support for #address-cells=2 has a loophole: if the reg is actually 0,
but the #address-cells is actually 1, like in such case below:

syscon {
	#address-cells = <1>;

	phy {
		reg = <0 0x10>;
	};
};

then the second u32 of the 'reg' is the size, not the address.

The code should check for the parent's #address-cells value, and not
assume that if the first u32 is 0, then the #address-cells is 2, and the
reg property is something like
	reg = <0 0xff00 0x10>;

Fixed this by looking for the #address-cells value and retrieving the
reg address only if this is ==2.
To avoid breaking anything I also kept the check `if reg==0` as some DT's
may have a wrong #address-cells as parent and even if this commit is
correct, it might break the existing wrong device-trees.

Fixes: d538efb9adcf ("phy: rockchip: inno-usb2: Add support #address_cells = 2")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

1 files changed, 1 insertions, 1 deletions

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index e43a5ba9b5..8d6f27735c 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -259,7 +259,7 @@ static int rockchip_usb2phy_probe(struct udevice *dev)
 	}
 
 	/* support address_cells=2 */
-	if (reg == 0) {
+	if (dev_read_addr_cells(dev) == 2 && reg == 0) {
 		if (ofnode_read_u32_index(dev_ofnode(dev), "reg", 1, &reg)) {
 			dev_err(dev, "%s must have reg[1]\n",
 				ofnode_get_name(dev_ofnode(dev)));