pl01x: Convert CONFIG_PL01X_SERIAL to Kconfig

We want to use Kconfig logic to depend on whether pl01x devices
are built in, so let's convert their inclusion selection to Kconfig.

This round goes to pl01x.

Signed-off-by: Alexander Graf <agraf@suse.de>

11 files changed, 17 insertions, 18 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b7ca10e290..30a6f6dc53 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -493,6 +493,7 @@ config TARGET_STV0991
 	select DM_SPI
 	select DM_SPI_FLASH
 	select SPI_FLASH
+	select PL01X_SERIAL
 
 config TARGET_X600
 	bool "Support x600"
@@ -548,6 +549,7 @@ config ARCH_BCM283X
 	select DM_SERIAL
 	select DM_GPIO
 	select OF_CONTROL
+	select PL01X_SERIAL
 	imply FAT_WRITE
 
 config TARGET_VEXPRESS_CA15_TC2
@@ -630,6 +632,7 @@ config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select DM
 	select DM_SERIAL
+	select PL01X_SERIAL
 
 config ARCH_KEYSTONE
 	bool "TI Keystone"
@@ -697,6 +700,7 @@ config ARCH_QEMU
 	select DM
 	select DM_SERIAL
 	select OF_CONTROL
+	select PL01X_SERIAL
 
 config ARCH_RMOBILE
 	bool "Renesas ARM SoCs"
@@ -836,15 +840,18 @@ config TEGRA
 config TARGET_VEXPRESS64_AEMV8A
 	bool "Support vexpress_aemv8a"
 	select ARM64
+	select PL01X_SERIAL
 
 config TARGET_VEXPRESS64_BASE_FVP
 	bool "Support Versatile Express ARMv8a FVP BASE model"
 	select ARM64
 	select SEMIHOSTING
+	select PL01X_SERIAL
 
 config TARGET_VEXPRESS64_BASE_FVP_DRAM
 	bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
 	select ARM64
+	select PL01X_SERIAL
 	help
 	  This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
 	  the default config to allow the user to load the images directly into
@@ -854,6 +861,7 @@ config TARGET_VEXPRESS64_BASE_FVP_DRAM
 config TARGET_VEXPRESS64_JUNO
 	bool "Support Versatile Express Juno Development Platform"
 	select ARM64
+	select PL01X_SERIAL
 
 config TARGET_LS2080A_EMU
 	bool "Support ls2080a_emu"
@@ -946,6 +954,7 @@ config TARGET_HIKEY
 	select DM_GPIO
 	select DM_SERIAL
 	select OF_CONTROL
+	select PL01X_SERIAL
 	  help
 	  Support for HiKey 96boards platform. It features a HI6220
 	  SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
@@ -957,6 +966,7 @@ config TARGET_POPLAR
 	select OF_CONTROL
 	select DM_SERIAL
 	select DM_USB
+	select PL01X_SERIAL
 	  help
 	  Support for Poplar 96boards EE platform. It features a HI3798cv200
 	  SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
@@ -1212,6 +1222,7 @@ config TARGET_THUNDERX_88XX
 	select ARM64
 	select OF_CONTROL
 	select SYS_CACHE_SHIFT_7
+	select PL01X_SERIAL
 
 config ARCH_ASPEED
 	bool "Support Aspeed SoCs"
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 99aa817e63..4167683885 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -459,6 +459,12 @@ config PL011_SERIAL
 	help
 	  Select this to enable a UART for platforms using PL011.
 
+config PL01X_SERIAL
+	bool "ARM PL010 and PL011 driver"
+	depends on DM_SERIAL
+	help
+	  Select this to enable a UART for platforms using PL010 or PL011.
+
 config ROCKCHIP_SERIAL
 	bool "Rockchip on-chip UART support"
 	depends on DM_SERIAL && SPL_OF_PLATDATA
diff --git a/include/configs/hikey.h b/include/configs/hikey.h
index 130c7694bf..8679b6b14f 100644
--- a/include/configs/hikey.h
+++ b/include/configs/hikey.h
@@ -50,9 +50,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)
 
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
-
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h
index edc798b117..f66d954748 100644
--- a/include/configs/integrator-common.h
+++ b/include/configs/integrator-common.h
@@ -15,8 +15,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */
 
-/* Serial port PL010/PL011 through the device model */
-#define CONFIG_PL01X_SERIAL
 #define CONFIG_CONS_INDEX		0
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
diff --git a/include/configs/poplar.h b/include/configs/poplar.h
index acdce29ba9..859da38462 100644
--- a/include/configs/poplar.h
+++ b/include/configs/poplar.h
@@ -26,9 +26,6 @@
 /* ATF bl33.bin load address (must match) */
 #define CONFIG_SYS_TEXT_BASE			0x37000000
 
-/* PL010/PL011 */
-#define CONFIG_PL01X_SERIAL
-
 /* USB configuration */
 #define CONFIG_USB_MAX_CONTROLLER_COUNT		2
 
diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h
index c8852cef34..c8ba78d8aa 100644
--- a/include/configs/qemu-arm.h
+++ b/include/configs/qemu-arm.h
@@ -20,9 +20,6 @@
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_2M)
 #define CONFIG_SYS_MALLOC_LEN		SZ_16M
 
-/* QEMU's PL011 serial port is detected via FDT using the device model */
-#define CONFIG_PL01X_SERIAL
-
 /* QEMU implements a 62.5MHz architected timer */
 /* FIXME: can we rely on CNTFREQ instead of hardcoding this fact here? */
 #define CONFIG_SYS_ARCH_TIMER
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index 2c84cf9a49..5ffe98015f 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -77,7 +77,6 @@
 
 /* Console UART, can be configured dynamically in config.txt */
 #define CONFIG_BCM283X_MU_SERIAL
-#define CONFIG_PL01X_SERIAL
 
 /* Console configuration */
 #define CONFIG_SYS_CBSIZE		1024
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index beb8f1ae9a..c21fea3fe1 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -25,9 +25,6 @@
 	(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
 #define CONFIG_SYS_MALLOC_LEN			(CONFIG_ENV_SIZE + 16 * 1024)
 
-/* serial port (PL011) configuration */
-#define CONFIG_PL01X_SERIAL
-
 /* user interface */
 #define CONFIG_SYS_CBSIZE			1024
 
diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h
index 209a7c3417..34940efb41 100644
--- a/include/configs/thunderx_88xx.h
+++ b/include/configs/thunderx_88xx.h
@@ -35,7 +35,6 @@
 
 /* PL011 Serial Configuration */
 
-#define CONFIG_PL01X_SERIAL
 #define CONFIG_PL011_CLOCK		24000000
 #define CONFIG_CONS_INDEX		1
 
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index f18e2ee068..07cc92ce17 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -110,7 +110,6 @@
 
 /* PL011 Serial Configuration */
 #define CONFIG_CONS_INDEX		0
-#define CONFIG_PL01X_SERIAL
 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 #define CONFIG_PL011_CLOCK		7273800
 #else
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 520b910bfa..e7e5cb2f0d 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1619,7 +1619,6 @@ CONFIG_PIXIS_BRDCFG1_TDM
 CONFIG_PIXIS_SGMII_CMD
 CONFIG_PL011_CLOCK
 CONFIG_PL011_SERIAL_RLCR
-CONFIG_PL01X_SERIAL
 CONFIG_PL01x_PORTS
 CONFIG_PLATFORM_ENV_SETTINGS
 CONFIG_PLATINUM_BOARD