arm64: dts: rk3399: Sync v5.7-rc1 from Linux

Sync rk3399 dts(i) files from v5.7-rc1 linux-next.

Reason:
To get updated PCIe nodes and properties on respective
dts(i) files.

Summary:
- sync won't include new board dts(i)
- sync will add required files used on respective dts(i)
- rk3399-puma-u-boot.dtsi spiflash label changed to norflash
- move puma.dtsi bios_enable into rk3399-puma-u-boot.dtsi
- move legacy max-frequency of sdhci into rk3399-u-boot.dtsi
- update cross-ec-[keyboard|sbs].dtsi path as per U-Boot
- keep roc-rk3399-pc dc_12v changes to -u-boot.dtsi

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

1 files changed, 35 insertions, 54 deletions

diff --git a/arch/arm/dts/rk3399-gru.dtsi b/arch/arm/dts/rk3399-gru.dtsi
index 0e2e047180..7ac88392f2 100644
--- a/arch/arm/dts/rk3399-gru.dtsi
+++ b/arch/arm/dts/rk3399-gru.dtsi
@@ -11,13 +11,7 @@
 
 / {
 	chosen {
-		u-boot,dm-pre-reloc;
 		stdout-path = "serial2:115200n8";
-		u-boot,spl-boot-order = &spi_flash;
-	};
-
-	config {
-		u-boot,spl-payload-offset = <0x40000>;
 	};
 
 	/*
@@ -268,17 +262,11 @@
 	pp5000_usb_a_vbus: pp5000 {
 	};
 
-	gpio_keys: gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bt_host_wake_l>;
-
-		wake_on_bt: wake-on-bt {
-			label = "Wake-on-Bluetooth";
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_WAKEUP>;
-			wakeup-source;
-		};
+	ap_rtc_clk: ap-rtc-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+		#clock-cells = <0>;
 	};
 
 	max98357a: max98357a {
@@ -549,8 +537,7 @@ ap_i2c_audio: &i2c8 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-1 = <&spi1_sleep>;
 
-	spi_flash: spiflash@0 {
-		u-boot,dm-pre-reloc;
+	spiflash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 
@@ -565,16 +552,12 @@ ap_i2c_audio: &i2c8 {
 
 &spi5 {
 	status = "okay";
-	spi-activate-delay = <100>;
-	spi-max-frequency = <3000000>;
-	spi-deactivate-delay = <200>;
 
 	cros_ec: ec@0 {
 		compatible = "google,cros-ec-spi";
 		reg = <0>;
 		interrupt-parent = <&gpio0>;
 		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
-		ec-interrupt = <&gpio0 1 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_ap_int_l>;
 		spi-max-frequency = <3000000>;
@@ -586,11 +569,9 @@ ap_i2c_audio: &i2c8 {
 			#size-cells = <0>;
 		};
 
-		usbc_extcon0: extcon@0 {
+		usbc_extcon0: extcon0 {
 			compatible = "google,extcon-usbc-cros-ec";
 			google,usb-port-id = <0>;
-
-			#extcon-cells = <0>;
 		};
 	};
 };
@@ -692,29 +673,29 @@ ap_i2c_audio: &i2c8 {
 
 	backlight-enable {
 		bl_en: bl-en {
-			rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	cros-ec {
 		ec_ap_int_l: ec-ap-int-l {
-			rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	discrete-regulators {
 		sd_io_pwr_en: sd-io-pwr-en {
-			rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
 
 		sd_pwr_1800_sel: sd-pwr-1800-sel {
-			rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO
+			rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
 
 		sd_slot_pwr_en: sd-slot-pwr-en {
-			rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO
+			rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
 					 &pcfg_pull_none>;
 		};
 	};
@@ -722,17 +703,17 @@ ap_i2c_audio: &i2c8 {
 	codec {
 		/* Has external pullup */
 		headset_int_l: headset-int-l {
-			rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		mic_int: mic-int {
-			rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	max98357a {
 		sdmode_en: sdmode-en {
-			rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
@@ -743,7 +724,7 @@ ap_i2c_audio: &i2c8 {
 			 * to hack this as gpio, so the EP could be able to
 			 * de-assert it along and make ClockPM(CPM) work.
 			 */
-			rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -754,20 +735,20 @@ ap_i2c_audio: &i2c8 {
 		 */
 		sdmmc_bus4: sdmmc-bus4 {
 			rockchip,pins =
-				<4 8 RK_FUNC_1 &pcfg_pull_none_8ma>,
-				<4 9 RK_FUNC_1 &pcfg_pull_none_8ma>,
-				<4 10 RK_FUNC_1 &pcfg_pull_none_8ma>,
-				<4 11 RK_FUNC_1 &pcfg_pull_none_8ma>;
+				<4 RK_PB0 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB1 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB2 1 &pcfg_pull_none_8ma>,
+				<4 RK_PB3 1 &pcfg_pull_none_8ma>;
 		};
 
 		sdmmc_clk: sdmmc-clk {
 			rockchip,pins =
-				<4 12 RK_FUNC_1 &pcfg_pull_none_8ma>;
+				<4 RK_PB4 1 &pcfg_pull_none_8ma>;
 		};
 
 		sdmmc_cmd: sdmmc-cmd {
 			rockchip,pins =
-				<4 13 RK_FUNC_1 &pcfg_pull_none_8ma>;
+				<4 RK_PB5 1 &pcfg_pull_none_8ma>;
 		};
 
 		/*
@@ -781,12 +762,12 @@ ap_i2c_audio: &i2c8 {
 		 */
 		sdmmc_cd: sdmmc-cd {
 			rockchip,pins =
-				<0 7 RK_FUNC_1 &pcfg_pull_none>;
+				<0 RK_PA7 1 &pcfg_pull_none>;
 		};
 
 		/* This is where we actually hook up CD; has external pull */
 		sdmmc_cd_gpio: sdmmc-cd-gpio {
-			rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
@@ -796,47 +777,47 @@ ap_i2c_audio: &i2c8 {
 			 * Pull down SPI1 CLK/CS/RX/TX during suspend, to
 			 * prevent leakage.
 			 */
-			rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 10 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 7 RK_FUNC_GPIO &pcfg_pull_down>,
-					<1 8 RK_FUNC_GPIO &pcfg_pull_down>;
+			rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
+					<1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
 		};
 	};
 
 	touchscreen {
 		touch_int_l: touch-int-l {
-			rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 
 		touch_reset_l: touch-reset-l {
-			rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	trackpad {
 		ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
-			rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>;
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 
 		trackpad_int_l: trackpad-int-l {
-			rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	wifi: wifi {
 		wlan_module_reset_l: wlan-module-reset-l {
-			rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_pull_none>;
+			rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
 		bt_host_wake_l: bt-host-wake-l {
 			/* Kevin has an external pull up, but Gru does not */
-			rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 
 	write-protect {
 		ap_fw_wp: ap-fw-wp {
-			rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>;
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
 };