ARM: dts: stm32: Synchronize DT with kernel one

This patch synchronizes U-boot DT with kernel one
This is based on https://patchwork.kernel.org/cover/10797115/

This patch adds initial support of STM32MP157 discovery boards:
  - Add support of stm32mp157a discovery1 board (part number: STM32MP157A-DK1).
    This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
    and 512MB of DDR3. Several connections are available on this boards:
    4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...

  - Add support of stm32mp157c discovery2 board (part number: STM32MP157C-DK2).
    This board is a "super-set" of stm32mp157a-dk1. A display panel (otm8009a)
    and Murata wifi/BT combo is added.

Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

1 files changed, 100 insertions, 0 deletions

diff --git a/arch/arm/dts/stm32mp157c-ev1.dts b/arch/arm/dts/stm32mp157c-ev1.dts
index 902a42bee2..e114c9b628 100644
--- a/arch/arm/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/dts/stm32mp157c-ev1.dts
@@ -11,6 +11,21 @@
 	model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
 	compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
 
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart4;
+		ethernet0 = &ethernet0;
+	};
+
+	panel_backlight: panel-backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpiod 13 GPIO_ACTIVE_LOW>;
+		default-on;
+		status = "okay";
+	};
 };
 
 &cec {
@@ -19,6 +34,64 @@
 	status = "okay";
 };
 
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			dsi_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_panel_in>;
+			};
+		};
+	};
+
+	panel-dsi@0 {
+		compatible = "raydium,rm68200";
+		reg = <0>;
+		reset-gpios = <&gpiof 15 GPIO_ACTIVE_LOW>;
+		backlight = <&panel_backlight>;
+		status = "okay";
+
+		port {
+			dsi_panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
 &i2c2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2_pins_a>;
@@ -35,6 +108,26 @@
 	status = "okay";
 };
 
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&m_can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&m_can1_pins_a>;
+	status = "okay";
+};
+
 &qspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
@@ -60,6 +153,12 @@
 	};
 };
 
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "disabled";
+};
+
 &timers2 {
 	status = "disabled";
 	pwm {
@@ -106,6 +205,7 @@
 &usbotg_hs {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usbotg_hs_pins_a>;
+	dr_mode = "peripheral";
 	phys = <&usbphyc_port1 0>;
 	phy-names = "usb2-phy";
 	status = "okay";