diff options
author | Andreas Dannenberg <dannenberg@ti.com> | 2020-01-07 10:45:54 +0300 |
---|---|---|
committer | Lokesh Vutla <lokeshvutla@ti.com> | 2020-01-20 07:40:28 +0300 |
commit | 643eb6ea07f3ce1e86069a4d281d1c4f89899cdf (patch) | |
tree | 5133a0d1c11ec0cb5746cdee9e167e50f2343557 /arch/arm/mach-k3 | |
parent | 499681e15e7e7afcae78bdc100d6a753f9271094 (diff) | |
download | u-boot-643eb6ea07f3ce1e86069a4d281d1c4f89899cdf.tar.xz |
board: ti: j721e: Use EEPROM-based board detection
The TI J721E EVM system on module (SOM), the common processor board, and
the associated daughtercards have on-board I2C-based EEPROMs containing
board config data. Use the board detection infrastructure to do the
following:
1) Parse the J721E SOM EEPROM and populate items like board name, board
HW and SW revision as well as board serial number into the TI common
EEPROM data structure residing in SRAM scratch space
2) Check for presence of daughter card(s) by probing associated I2C
addresses used for on-board EEPROMs containing daughter card-specific
data. If such a card is found, parse the EEPROM data such as for
additional Ethernet MAC addresses and populate those into U-Boot
accordingly
3) Dynamically apply daughter card DTB overlays to the U-Boot (proper)
DTB during SPL execution
4) Dynamically create an U-Boot ENV variable called name_overlays
during U-Boot execution containing a list of daugherboard-specific
DTB overlays based on daughercards found to be used during Kernel
boot.
This patch adds support for the J721E system on module boards containing
the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS),
the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet
Expansion Board ("J7X-VSC8514-ETH"), the infotainment board
("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial
expansion board ("J7X-GESI-EXP").
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Diffstat (limited to 'arch/arm/mach-k3')
-rw-r--r-- | arch/arm/mach-k3/include/mach/j721e_hardware.h | 3 | ||||
-rw-r--r-- | arch/arm/mach-k3/j721e_init.c | 3 |
2 files changed, 6 insertions, 0 deletions
diff --git a/arch/arm/mach-k3/include/mach/j721e_hardware.h b/arch/arm/mach-k3/include/mach/j721e_hardware.h index 8d429772b5..ead136ed63 100644 --- a/arch/arm/mach-k3/include/mach/j721e_hardware.h +++ b/arch/arm/mach-k3/include/mach/j721e_hardware.h @@ -46,4 +46,7 @@ #define CTRLMMR_LOCK_KICK1 0x0100c #define CTRLMMR_LOCK_KICK1_UNLOCK_VAL 0xd172bc5a +/* MCU SCRATCHPAD usage */ +#define TI_SRAM_SCRATCH_BOARD_EEPROM_START CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE + #endif /* __ASM_ARCH_J721E_HARDWARE_H */ diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c index 4758739266..8d562e4cbe 100644 --- a/arch/arm/mach-k3/j721e_init.c +++ b/arch/arm/mach-k3/j721e_init.c @@ -119,6 +119,9 @@ void board_init_f(ulong dummy) preloader_console_init(); #endif + /* Perform EEPROM-based board detection */ + do_board_detect(); + #if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0) ret = uclass_get_device_by_driver(UCLASS_MISC, DM_GET_DRIVER(k3_avs), &dev); |