diff options
author | Felix Brack <fb@ltec.ch> | 2018-01-23 20:27:22 +0300 |
---|---|---|
committer | Tom Rini <trini@konsulko.com> | 2018-01-28 20:27:32 +0300 |
commit | 85ab0452fefc8c48b0b4f35200cb2590b4693ab3 (patch) | |
tree | 9909a4d64d186b480669625d9914af1749efa917 /board/eets/pdu001/board.c | |
parent | c8a73a26d6dd9b7d489e66529fe1412425d8f2d1 (diff) | |
download | u-boot-85ab0452fefc8c48b0b4f35200cb2590b4693ab3.tar.xz |
arm: add support for PDU001
This patch adds support for the PDU001 board.
Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Tom Rini <trini@konsulko.com>
Diffstat (limited to 'board/eets/pdu001/board.c')
-rw-r--r-- | board/eets/pdu001/board.c | 276 |
1 files changed, 276 insertions, 0 deletions
diff --git a/board/eets/pdu001/board.c b/board/eets/pdu001/board.c new file mode 100644 index 0000000000..416bd937cf --- /dev/null +++ b/board/eets/pdu001/board.c @@ -0,0 +1,276 @@ +/* + * board.c + * + * Board functions for EETS PDU001 board + * + * Copyright (C) 2018, EETS GmbH, http://www.eets.ch/ + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <i2c.h> +#include <environment.h> +#include <watchdog.h> +#include <debug_uart.h> +#include <dm/ofnode.h> +#include <power/pmic.h> +#include <power/regulator.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define I2C_ADDR_NODE_ID 0x50 +#define I2C_REG_NODE_ID_BASE 0xfa +#define NODE_ID_BYTE_COUNT 6 + +#define I2C_ADDR_LEDS 0x60 +#define I2C_REG_RUN_LED 0x06 +#define RUN_LED_OFF 0x0 +#define RUN_LED_RED 0x1 +#define RUN_LED_GREEN (0x1 << 2) + +#define VDD_MPU_REGULATOR "regulator@2" +#define VDD_CORE_REGULATOR "regulator@3" +#define DEFAULT_CORE_VOLTAGE 1137500 + +/* + * boot device save register + * ------------------------- + * The boot device can be quired by 'spl_boot_device()' in + * 'am33xx_spl_board_init'. However it can't be saved in the u-boot + * environment here. In turn 'spl_boot_device' can't be called in + * 'board_late_init' which allows writing to u-boot environment. + * To get the boot device from 'am33xx_spl_board_init' to + * 'board_late_init' we therefore use a scratch register from the RTC. + */ +#define CONFIG_SYS_RTC_SCRATCH0 0x60 +#define BOOT_DEVICE_SAVE_REGISTER (RTC_BASE + CONFIG_SYS_RTC_SCRATCH0) + +#ifdef CONFIG_SPL_BUILD +static void save_boot_device(void) +{ + *((u32 *)(BOOT_DEVICE_SAVE_REGISTER)) = spl_boot_device(); +} +#endif + +u32 boot_device(void) +{ + return *((u32 *)(BOOT_DEVICE_SAVE_REGISTER)); +} + +/* Store the boot device in the environment variable 'boot_device' */ +static void env_set_boot_device(void) +{ + switch (boot_device()) { + case BOOT_DEVICE_MMC1: { + env_set("boot_device", "emmc"); + break; + } + case BOOT_DEVICE_MMC2: { + env_set("boot_device", "sdcard"); + break; + } + default: { + env_set("boot_device", "unknown"); + break; + } + } +} + +static void set_run_led(struct udevice *dev) +{ + int val = RUN_LED_OFF; + + if (IS_ENABLED(CONFIG_RUN_LED_RED)) + val = RUN_LED_RED; + else if (IS_ENABLED(CONFIG_RUN_LED_GREEN)) + val = RUN_LED_GREEN; + + dm_i2c_reg_write(dev, I2C_REG_RUN_LED, val); +} + +/* Set 'serial#' to the EUI-48 value of board node ID chip */ +static void env_set_serial(struct udevice *dev) +{ + int val; + char serial[2 * NODE_ID_BYTE_COUNT + 1]; + int n; + + for (n = 0; n < sizeof(serial); n += 2) { + val = dm_i2c_reg_read(dev, I2C_REG_NODE_ID_BASE + n / 2); + sprintf(serial + n, "%02X", val); + } + serial[2 * NODE_ID_BYTE_COUNT] = '\0'; + env_set("serial#", serial); +} + +static void set_mpu_and_core_voltage(void) +{ + int mpu_vdd; + int sil_rev; + struct udevice *dev; + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + + /* + * The PDU001 (more precisely the computing module m2) uses a + * TPS65910 PMIC. For all MPU frequencies we support we use a CORE + * voltage of 1.1375V. For MPU voltage we need to switch based on + * the frequency we are running at. + */ + + /* + * Depending on MPU clock and PG we will need a different VDD + * to drive at that speed. + */ + sil_rev = readl(&cdev->deviceid) >> 28; + mpu_vdd = am335x_get_mpu_vdd(sil_rev, dpll_mpu_opp100.m); + + /* first update the MPU voltage */ + if (!regulator_get_by_devname(VDD_MPU_REGULATOR, &dev)) { + if (regulator_set_value(dev, mpu_vdd)) + debug("failed to set MPU voltage\n"); + } else { + debug("invalid MPU voltage ragulator %s\n", VDD_MPU_REGULATOR); + } + + /* second update the CORE voltage */ + if (!regulator_get_by_devname(VDD_CORE_REGULATOR, &dev)) { + if (regulator_set_value(dev, DEFAULT_CORE_VOLTAGE)) + debug("failed to set CORE voltage\n"); + } else { + debug("invalid CORE voltage ragulator %s\n", + VDD_CORE_REGULATOR); + } +} + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +static const struct ddr_data ddr2_data = { + .datardsratio0 = MT47H128M16RT25E_RD_DQS, + .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE, + .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA, +}; + +static const struct cmd_control ddr2_cmd_ctrl_data = { + .cmd0csratio = MT47H128M16RT25E_RATIO, + .cmd1csratio = MT47H128M16RT25E_RATIO, + .cmd2csratio = MT47H128M16RT25E_RATIO, +}; + +static const struct emif_regs ddr2_emif_reg_data = { + .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, + .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, + .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, + .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, + .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, +}; + +#define OSC (V_OSCK / 1000000) +const struct dpll_params dpll_ddr = { + 266, OSC - 1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_evm_sk = { + 303, OSC - 1, 1, -1, -1, -1, -1}; +const struct dpll_params dpll_ddr_bone_black = { + 400, OSC - 1, 1, -1, -1, -1, -1}; + +void am33xx_spl_board_init(void) +{ + struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + + /* Get the frequency */ + dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev); + + /* Set CORE Frequencies to OPP100 */ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + + /* Set MPU Frequency to what we detected now that voltages are set */ + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); + + /* save boot device for later use by 'board_late_init' */ + save_boot_device(); +} + +const struct dpll_params *get_dpll_ddr_params(void) +{ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); + + return &dpll_ddr; +} + +void set_mux_conf_regs(void) +{ + /* done first by the ROM and afterwards by the pin controller driver */ + enable_i2c0_pin_mux(); +} + +const struct ctrl_ioregs ioregs = { + .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, +}; + +void sdram_init(void) +{ + config_ddr(266, &ioregs, &ddr2_data, + &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0); +} +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ + +#ifdef CONFIG_DEBUG_UART +void board_debug_uart_init(void) +{ + /* done by pin controller driver if not debugging */ + enable_uart_pin_mux(CONFIG_DEBUG_UART_BASE); +} +#endif + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ +#ifdef CONFIG_HW_WATCHDOG + hw_watchdog_init(); +#endif + + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + return 0; +} + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init(void) +{ + struct udevice *dev; + + set_mpu_and_core_voltage(); + env_set_boot_device(); + + /* second I2C bus connects to node ID and front panel LED chip */ + if (!i2c_get_chip_for_busnum(1, I2C_ADDR_LEDS, 1, &dev)) + set_run_led(dev); + if (!i2c_get_chip_for_busnum(1, I2C_ADDR_NODE_ID, 1, &dev)) + env_set_serial(dev); + + return 0; +} +#endif |