ppc: Remove MPC8568MDS board

This board has not been converted to CONFIG_DM_PCI by the deadline and is
also missing conversion to CONFIG_DM.  Remove it.  As this is the last
ARCH_MPC8568 platform, remove that support as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

9 files changed, 0 insertions, 717 deletions

diff --git a/board/freescale/mpc8568mds/Kconfig b/board/freescale/mpc8568mds/Kconfig
deleted file mode 100644
index 4e178c5039..0000000000
--- a/board/freescale/mpc8568mds/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MPC8568MDS
-
-config SYS_BOARD
-	default "mpc8568mds"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_CONFIG_NAME
-	default "MPC8568MDS"
-
-endif
diff --git a/board/freescale/mpc8568mds/MAINTAINERS b/board/freescale/mpc8568mds/MAINTAINERS
deleted file mode 100644
index f4747866d2..0000000000
--- a/board/freescale/mpc8568mds/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MPC8568MDS BOARD
-M:	Priyanka Jain <priyanka.jain@nxp.com>
-S:	Maintained
-F:	board/freescale/mpc8568mds/
-F:	include/configs/MPC8568MDS.h
-F:	configs/MPC8568MDS_defconfig
diff --git a/board/freescale/mpc8568mds/Makefile b/board/freescale/mpc8568mds/Makefile
deleted file mode 100644
index 1e9095bddd..0000000000
--- a/board/freescale/mpc8568mds/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright 2004-2007 Freescale Semiconductor.
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-
-obj-y	+= mpc8568mds.o
-obj-y	+= bcsr.o
-obj-y	+= ddr.o
-obj-y	+= law.o
-obj-y	+= tlb.o
diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
deleted file mode 100644
index b1e638af5a..0000000000
--- a/board/freescale/mpc8568mds/bcsr.c
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007 Freescale Semiconductor.
- */
-
-#include <common.h>
-#include <flash.h>
-#include <asm/io.h>
-
-#include "bcsr.h"
-
-void enable_8568mds_duart(void)
-{
-	volatile uint* duart_mux	= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
-	volatile uint* devices		= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
-	volatile u8 *bcsr		= (u8 *)(CONFIG_SYS_BCSR);
-
-	*duart_mux = 0x80000000;	/* Set the mux to Duart on PMUXCR */
-	*devices  = 0;			/* Enable all peripheral devices */
-	bcsr[5] |= 0x01;		/* Enable Duart in BCSR*/
-}
-
-void enable_8568mds_flash_write(void)
-{
-	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
-
-	bcsr[9] |= 0x01;
-}
-
-void disable_8568mds_flash_write(void)
-{
-	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
-
-	bcsr[9] &= ~(0x01);
-}
-
-void enable_8568mds_qe_mdio(void)
-{
-	u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
-
-	bcsr[7] |= 0x01;
-}
-
-#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
-void reset_8568mds_uccs(void)
-{
-	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
-
-	/* Turn off UCC1 & UCC2 */
-	out_8(&bcsr[8], in_8(&bcsr[8]) & ~BCSR_UCC1_GETH_EN);
-	out_8(&bcsr[9], in_8(&bcsr[9]) & ~BCSR_UCC2_GETH_EN);
-
-	/* Mode is RGMII, all bits clear */
-	out_8(&bcsr[11], in_8(&bcsr[11]) & ~(BCSR_UCC1_MODE_MSK |
-					     BCSR_UCC2_MODE_MSK));
-
-	/* Turn UCC1 & UCC2 on */
-	out_8(&bcsr[8], in_8(&bcsr[8]) | BCSR_UCC1_GETH_EN);
-	out_8(&bcsr[9], in_8(&bcsr[9]) | BCSR_UCC2_GETH_EN);
-}
-#endif
diff --git a/board/freescale/mpc8568mds/bcsr.h b/board/freescale/mpc8568mds/bcsr.h
deleted file mode 100644
index a8e13a2a55..0000000000
--- a/board/freescale/mpc8568mds/bcsr.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright 2007 Freescale Semiconductor.
- */
-
-#ifndef __BCSR_H_
-#define __BCSR_H_
-
-#include <common.h>
-
-/* BCSR Bit definitions
-	* BCSR 0 *
-	0:3	ccb sys pll
-	4:6	cfg core pll
-	7	cfg boot seq
-
-	* BCSR 1 *
-	0:2	cfg rom lock
-	3:5	cfg host agent
-	6	PCI IO
-	7	cfg RIO size
-
-	* BCSR 2 *
-	0:4	QE PLL
-	5	QE clock
-	6	cfg PCI arbiter
-
-	* BCSR 3 *
-	0	TSEC1 reduce
-	1	TSEC2 reduce
-	2:3	TSEC1 protocol
-	4:5	TSEC2 protocol
-	6	PHY1 slave
-	7	PHY2 slave
-
-	* BCSR 4 *
-	4	clock enable
-	5	boot EPROM
-	6	GETH transactive reset
-	7	BRD write potect
-
-	* BCSR 5 *
-	1:3	Leds 1-3
-	4	UPC1 enable
-	5	UPC2 enable
-	6	UPC2 pos
-	7	RS232 enable
-
-	* BCSR 6 *
-	0	CFG ver 0
-	1	CFG ver 1
-	6	Register config led
-	7	Power on reset
-
-	* BCSR 7 *
-	2	board host mode indication
-	5	enable TSEC1 PHY
-	6	enable TSEC2 PHY
-
-	* BCSR 8 *
-	0	UCC GETH1 enable
-	1	UCC GMII enable
-	3	UCC TBI enable
-	5	UCC MII enable
-	7	Real time clock reset
-
-	* BCSR 9 *
-	0	UCC2 GETH enable
-	1	UCC2 GMII enable
-	3	UCC2 TBI enable
-	5	UCC2 MII enable
-	6	Ready only - indicate flash ready after burning
-	7	Flash write protect
-*/
-
-#define BCSR_UCC1_GETH_EN	(0x1 << 7)
-#define BCSR_UCC2_GETH_EN	(0x1 << 7)
-#define BCSR_UCC1_MODE_MSK	(0x3 << 4)
-#define BCSR_UCC2_MODE_MSK	(0x3 << 0)
-
-/*BCSR Utils functions*/
-
-void enable_8568mds_duart(void);
-void enable_8568mds_flash_write(void);
-void disable_8568mds_flash_write(void);
-void enable_8568mds_qe_mdio(void);
-
-#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
-void reset_8568mds_uccs(void);
-#endif
-
-#endif	/* __BCSR_H_ */
diff --git a/board/freescale/mpc8568mds/ddr.c b/board/freescale/mpc8568mds/ddr.c
deleted file mode 100644
index 58a979dbc7..0000000000
--- a/board/freescale/mpc8568mds/ddr.c
+++ /dev/null
@@ -1,53 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for clock adjust:
-	 *	- number of chips on bus
-	 *	- position of slot
-	 *	- DDR1 vs. DDR2?
-	 *	- ???
-	 *
-	 * This needs to be determined on a board-by-board basis.
-	 *	0110	3/4 cycle late
-	 *	0111	7/8 cycle late
-	 */
-	popts->clk_adjust = 6;
-
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 10;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
diff --git a/board/freescale/mpc8568mds/law.c b/board/freescale/mpc8568mds/law.c
deleted file mode 100644
index c04c36b5d8..0000000000
--- a/board/freescale/mpc8568mds/law.c
+++ /dev/null
@@ -1,40 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008, 2010-2011 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW(Local Access Window) configuration:
- *
- *0)   0x0000_0000   0x7fff_ffff     DDR                     2G
- *1)   0x8000_0000   0x9fff_ffff     PCI1 MEM                512MB
- *2)   0xa000_0000   0xbfff_ffff     PCIe MEM                512MB
- *-)   0xe000_0000   0xe00f_ffff     CCSR                    1M
- *3)   0xe200_0000   0xe27f_ffff     PCI1 I/O                8M
- *4)   0xe280_0000   0xe2ff_ffff     PCIe I/O                8M
- *5)   0xc000_0000   0xdfff_ffff     SRIO                    512MB
- *6.a) 0xf000_0000   0xf3ff_ffff     SDRAM                   64MB
- *6.b) 0xf800_0000   0xf800_7fff     BCSR                    32KB
- *6.c) 0xf800_8000   0xf800_ffff     PIB (CS4)		     32KB
- *6.d) 0xf801_0000   0xf801_7fff     PIB (CS5)		     32KB
- *6.e) 0xfe00_0000   0xffff_ffff     Flash                   32MB
- *
- *Notes:
- *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
- *    If flash is 8M at default position (last 8M), no LAW needed.
- *
- */
-
-struct law_entry law_table[] = {
-	/* LBC window - maps 256M.  That's SDRAM, BCSR, PIBs, and Flash */
-	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
deleted file mode 100644
index 7b379464cd..0000000000
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2007,2009-2011 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- */
-
-#include <common.h>
-#include <flash.h>
-#include <init.h>
-#include <log.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <spd_sdram.h>
-#include <i2c.h>
-#include <ioports.h>
-#include <linux/delay.h>
-#include <linux/libfdt.h>
-#include <fdt_support.h>
-
-#include "bcsr.h"
-
-const qe_iop_conf_t qe_iop_conf_tab[] = {
-	/* GETH1 */
-	{4, 10, 1, 0, 2}, /* TxD0 */
-	{4,  9, 1, 0, 2}, /* TxD1 */
-	{4,  8, 1, 0, 2}, /* TxD2 */
-	{4,  7, 1, 0, 2}, /* TxD3 */
-	{4, 23, 1, 0, 2}, /* TxD4 */
-	{4, 22, 1, 0, 2}, /* TxD5 */
-	{4, 21, 1, 0, 2}, /* TxD6 */
-	{4, 20, 1, 0, 2}, /* TxD7 */
-	{4, 15, 2, 0, 2}, /* RxD0 */
-	{4, 14, 2, 0, 2}, /* RxD1 */
-	{4, 13, 2, 0, 2}, /* RxD2 */
-	{4, 12, 2, 0, 2}, /* RxD3 */
-	{4, 29, 2, 0, 2}, /* RxD4 */
-	{4, 28, 2, 0, 2}, /* RxD5 */
-	{4, 27, 2, 0, 2}, /* RxD6 */
-	{4, 26, 2, 0, 2}, /* RxD7 */
-	{4, 11, 1, 0, 2}, /* TX_EN */
-	{4, 24, 1, 0, 2}, /* TX_ER */
-	{4, 16, 2, 0, 2}, /* RX_DV */
-	{4, 30, 2, 0, 2}, /* RX_ER */
-	{4, 17, 2, 0, 2}, /* RX_CLK */
-	{4, 19, 1, 0, 2}, /* GTX_CLK */
-	{1, 31, 2, 0, 3}, /* GTX125 */
-
-	/* GETH2 */
-	{5, 10, 1, 0, 2}, /* TxD0 */
-	{5,  9, 1, 0, 2}, /* TxD1 */
-	{5,  8, 1, 0, 2}, /* TxD2 */
-	{5,  7, 1, 0, 2}, /* TxD3 */
-	{5, 23, 1, 0, 2}, /* TxD4 */
-	{5, 22, 1, 0, 2}, /* TxD5 */
-	{5, 21, 1, 0, 2}, /* TxD6 */
-	{5, 20, 1, 0, 2}, /* TxD7 */
-	{5, 15, 2, 0, 2}, /* RxD0 */
-	{5, 14, 2, 0, 2}, /* RxD1 */
-	{5, 13, 2, 0, 2}, /* RxD2 */
-	{5, 12, 2, 0, 2}, /* RxD3 */
-	{5, 29, 2, 0, 2}, /* RxD4 */
-	{5, 28, 2, 0, 2}, /* RxD5 */
-	{5, 27, 2, 0, 3}, /* RxD6 */
-	{5, 26, 2, 0, 2}, /* RxD7 */
-	{5, 11, 1, 0, 2}, /* TX_EN */
-	{5, 24, 1, 0, 2}, /* TX_ER */
-	{5, 16, 2, 0, 2}, /* RX_DV */
-	{5, 30, 2, 0, 2}, /* RX_ER */
-	{5, 17, 2, 0, 2}, /* RX_CLK */
-	{5, 19, 1, 0, 2}, /* GTX_CLK */
-	{1, 31, 2, 0, 3}, /* GTX125 */
-	{4,  6, 3, 0, 2}, /* MDIO */
-	{4,  5, 1, 0, 2}, /* MDC */
-
-	/* UART1 */
-	{2, 0, 1, 0, 2}, /* UART_SOUT1 */
-	{2, 1, 1, 0, 2}, /* UART_RTS1 */
-	{2, 2, 2, 0, 2}, /* UART_CTS1 */
-	{2, 3, 2, 0, 2}, /* UART_SIN1 */
-
-	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
-};
-
-void local_bus_init(void);
-
-int board_early_init_f (void)
-{
-	/*
-	 * Initialize local bus.
-	 */
-	local_bus_init ();
-
-	enable_8568mds_duart();
-	enable_8568mds_flash_write();
-#if defined(CONFIG_UEC_ETH1) || defined(CONFIG_UEC_ETH2)
-	reset_8568mds_uccs();
-#endif
-#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
-	enable_8568mds_qe_mdio();
-#endif
-
-#ifdef CONFIG_SYS_I2C2_OFFSET
-	/* Enable I2C2_SCL and I2C2_SDA */
-	volatile struct par_io *port_c;
-	port_c = (struct par_io*)(CONFIG_SYS_IMMR + 0xe0140);
-	port_c->cpdir2 |= 0x0f000000;
-	port_c->cppar2 &= ~0x0f000000;
-	port_c->cppar2 |= 0x0a000000;
-#endif
-
-	return 0;
-}
-
-int checkboard (void)
-{
-	printf ("Board: 8568 MDS\n");
-
-	return 0;
-}
-
-/*
- * Initialize Local Bus
- */
-void
-local_bus_init(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-
-	uint clkdiv;
-	sys_info_t sysinfo;
-
-	get_sys_info(&sysinfo);
-	clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
-
-	gur->lbiuiplldcr1 = 0x00078080;
-	if (clkdiv == 16) {
-		gur->lbiuiplldcr0 = 0x7c0f1bf0;
-	} else if (clkdiv == 8) {
-		gur->lbiuiplldcr0 = 0x6c0f1bf0;
-	} else if (clkdiv == 4) {
-		gur->lbiuiplldcr0 = 0x5c0f1bf0;
-	}
-
-	lbc->lcrr |= 0x00030000;
-
-	asm("sync;isync;msync");
-}
-
-/*
- * Initialize SDRAM memory on the Local Bus.
- */
-void lbc_sdram_init(void)
-{
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
-
-	uint idx;
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
-	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
-	uint lsdmr_common;
-
-	puts("LBC SDRAM: ");
-	print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
-		   "\n       ");
-
-	/*
-	 * Setup SDRAM Base and Option Registers
-	 */
-	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
-	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
-	asm("msync");
-
-	lbc->lbcr = CONFIG_SYS_LBC_LBCR;
-	asm("msync");
-
-	lbc->lsrt = CONFIG_SYS_LBC_LSRT;
-	lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
-	asm("msync");
-
-	/*
-	 * MPC8568 uses "new" 15-16 style addressing.
-	 */
-	lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
-	lsdmr_common |= LSDMR_BSMA1516;
-
-	/*
-	 * Issue PRECHARGE ALL command.
-	 */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue 8 AUTO REFRESH commands.
-	 */
-	for (idx = 0; idx < 8; idx++) {
-		lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
-		asm("sync;msync");
-		*sdram_addr = 0xff;
-		ppcDcbf((unsigned long) sdram_addr);
-		udelay(100);
-	}
-
-	/*
-	 * Issue 8 MODE-set command.
-	 */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(100);
-
-	/*
-	 * Issue NORMAL OP command.
-	 */
-	lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
-	asm("sync;msync");
-	*sdram_addr = 0xff;
-	ppcDcbf((unsigned long) sdram_addr);
-	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
-
-#endif	/* enable SDRAM init */
-}
-
-#if defined(CONFIG_PCI)
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_mpc8568mds_config_table[] = {
-	{
-	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
-	 pci_cfgfunc_config_device,
-	 {PCI_ENET0_IOADDR,
-	  PCI_ENET0_MEMADDR,
-	  PCI_COMMON_MEMORY | PCI_COMMAND_MASTER}
-	 },
-	{}
-};
-#endif
-
-static struct pci_controller pci1_hose;
-#endif	/* CONFIG_PCI */
-
-/*
- * pib_init() -- Initialize the PCA9555 IO expander on the PIB board
- */
-void
-pib_init(void)
-{
-	u8 val8, orig_i2c_bus;
-	/*
-	 * Assign PIB PMC2/3 to PCI bus
-	 */
-
-	/*switch temporarily to I2C bus #2 */
-	orig_i2c_bus = i2c_get_bus_num();
-	i2c_set_bus_num(1);
-
-	val8 = 0x00;
-	i2c_write(0x23, 0x6, 1, &val8, 1);
-	i2c_write(0x23, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x23, 0x2, 1, &val8, 1);
-	i2c_write(0x23, 0x3, 1, &val8, 1);
-
-	val8 = 0x00;
-	i2c_write(0x26, 0x6, 1, &val8, 1);
-	val8 = 0x34;
-	i2c_write(0x26, 0x7, 1, &val8, 1);
-	val8 = 0xf9;
-	i2c_write(0x26, 0x2, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x26, 0x3, 1, &val8, 1);
-
-	val8 = 0x00;
-	i2c_write(0x27, 0x6, 1, &val8, 1);
-	i2c_write(0x27, 0x7, 1, &val8, 1);
-	val8 = 0xff;
-	i2c_write(0x27, 0x2, 1, &val8, 1);
-	val8 = 0xef;
-	i2c_write(0x27, 0x3, 1, &val8, 1);
-
-	asm("eieio");
-	i2c_set_bus_num(orig_i2c_bus);
-}
-
-#ifdef CONFIG_PCI
-void pci_init_board(void)
-{
-	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	int first_free_busno = 0;
-#ifdef CONFIG_PCI1
-	struct fsl_pci_info pci_info;
-	u32 devdisr, pordevsr, io_sel;
-	u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
-
-	devdisr = in_be32(&gur->devdisr);
-	pordevsr = in_be32(&gur->pordevsr);
-	porpllsr = in_be32(&gur->porpllsr);
-	io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-
-	debug("   %s: devdisr=%x, io_sel=%x\n", __func__, devdisr, io_sel);
-
-	pci_speed = 66666000;
-	pci_32 = 1;
-	pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
-	pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
-
-	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
-		SET_STD_PCI_INFO(pci_info, 1);
-		set_next_law(pci_info.mem_phys,
-			law_size_bits(pci_info.mem_size), pci_info.law);
-		set_next_law(pci_info.io_phys,
-			law_size_bits(pci_info.io_size), pci_info.law);
-
-		pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
-		printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
-			(pci_32) ? 32 : 64,
-			(pci_speed == 33333000) ? "33" :
-			(pci_speed == 66666000) ? "66" : "unknown",
-			pci_clk_sel ? "sync" : "async",
-			pci_agent ? "agent" : "host",
-			pci_arb ? "arbiter" : "external-arbiter",
-			pci_info.regs);
-
-#ifndef CONFIG_PCI_PNP
-		pci1_hose.config_table = pci_mpc8568mds_config_table;
-#endif
-		first_free_busno = fsl_pci_init_port(&pci_info,
-					&pci1_hose, first_free_busno);
-	} else {
-		printf("PCI: disabled\n");
-	}
-
-	puts("\n");
-#else
-	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
-#endif
-
-	fsl_pcie_init_board(first_free_busno);
-}
-#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, struct bd_info *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	FT_FSL_PCI_SETUP;
-
-	return 0;
-}
-#endif
diff --git a/board/freescale/mpc8568mds/tlb.c b/board/freescale/mpc8568mds/tlb.c
deleted file mode 100644
index fea1606a1d..0000000000
--- a/board/freescale/mpc8568mds/tlb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-	/* TLB 0 - for temp stack in cache */
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024 , CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 0, BOOKE_PAGESZ_4K, 0),
-
-	/* TLB 1 Initializations */
-	/*
-	 * TLBe 0:	16M	Non-cacheable, guarded
-	 * 0xff000000	16M	FLASH (upper half)
-	 * Out of reset this entry is only 4K.
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE + 0x1000000, CONFIG_SYS_FLASH_BASE + 0x1000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 0, BOOKE_PAGESZ_16M, 1),
-
-	/*
-	 * TLBe 1:	16M	Non-cacheable, guarded
-	 * 0xfe000000	16M	FLASH (lower half)
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_16M, 1),
-
-	/*
-	 * TLBe 2:	1G	Non-cacheable, guarded
-	 * 0x80000000	512M	PCI1 MEM
-	 * 0xa0000000	512M	PCIe MEM
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_1G, 1),
-
-	/*
-	 * TLBe 3:	64M	Non-cacheable, guarded
-	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	8M	PCI1 IO
-	 * 0xe280_0000	8M	PCIe IO
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLBe 4:	64M	Cacheable, non-guarded
-	 * 0xf000_0000	64M	LBC SDRAM
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_M,
-		      0, 4, BOOKE_PAGESZ_64M, 1),
-
-	/*
-	 * TLBe 5:	256K	Non-cacheable, guarded
-	 * 0xf8000000	32K BCSR
-	 * 0xf8008000	32K PIB (CS4)
-	 * 0xf8010000	32K PIB (CS5)
-	 */
-	SET_TLB_ENTRY(1, CONFIG_SYS_BCSR_BASE, CONFIG_SYS_BCSR_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 5, BOOKE_PAGESZ_256K, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);