imx: Add SeeedStudio NPI-IMX6ULL Support

CPU:   Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz)
CPU:   Industrial temperature grade (-40C to 105C) at 49C
Reset cause: POR
Model: Seeed NPi iMX6ULL Dev Board with NAND
Board: Seeed NPi i.MX6ULL Dev Board
DRAM:  512 MiB
NAND:  512 MiB
MMC:   FSL_SDHC: 0
In:    serial@2020000
Out:   serial@2020000
Err:   serial@2020000
Net:   FEC0

Working:
- Eth0
- MMC/SD
- NAND
- UART 1
- USB host

Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com>

Note:

Changes in v2:

 * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file.
 * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation.

6 files changed, 405 insertions, 0 deletions

diff --git a/board/seeed/npi_imx6ull/Kconfig b/board/seeed/npi_imx6ull/Kconfig
new file mode 100644
index 0000000000..5e298299a3
--- /dev/null
+++ b/board/seeed/npi_imx6ull/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_NPI_IMX6ULL
+
+config SYS_BOARD
+	default "npi_imx6ull"
+
+config SYS_VENDOR
+	default "seeed"
+
+config SYS_CONFIG_NAME
+	default "npi_imx6ull"
+
+endif
diff --git a/board/seeed/npi_imx6ull/MAINTAINERS b/board/seeed/npi_imx6ull/MAINTAINERS
new file mode 100644
index 0000000000..c6a915c79b
--- /dev/null
+++ b/board/seeed/npi_imx6ull/MAINTAINERS
@@ -0,0 +1,9 @@
+NPI_IMX6ULL BOARD
+M:	Navin Sankar Velliangiri <navin@linumiz.com>
+S:	Maintained
+F:	arch/arm/dts/imx6ull-seeed-npi-imx6ull-dev-board.dts
+F:	arch/arm/dts/imx6ull-seeed-npi-imx6ull-u-boot.dtsi
+F:	arch/arm/dts/imx6ull-seeed-npi-imx6ull.dtsi
+F:	board/seeed/npi-imx6ull/
+F:	configs/seeed_npi_imx6ull_defconfig
+F:	include/configs/npi_imx6ull.h
diff --git a/board/seeed/npi_imx6ull/Makefile b/board/seeed/npi_imx6ull/Makefile
new file mode 100644
index 0000000000..93ea413517
--- /dev/null
+++ b/board/seeed/npi_imx6ull/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier:	GPL-2.0+
+
+obj-y	:= npi_imx6ull.o
+obj-$(CONFIG_SPL_BUILD) += spl.o
diff --git a/board/seeed/npi_imx6ull/README b/board/seeed/npi_imx6ull/README
new file mode 100644
index 0000000000..01d218a9bc
--- /dev/null
+++ b/board/seeed/npi_imx6ull/README
@@ -0,0 +1,61 @@
+How to use U-BOOT on SeeedStudio NPI-IMX6ULL Single Board Computer
+------------------------------------------------------------------
+
+- Configure and build U-Boot for NPI-IMX6ULL:
+
+    $ export ARCH=arm
+    $ export CROSS_COMPILE=arm-none-linux-gnueabihf-
+    $ make seeed_npi_imx6ull_defconfig
+    $ make
+
+This will generate SPL and u-boot-dtb.img images.
+
+Boot from MMC/SD:
+- The SPL and u-boot-dtb.img images need to be flashed into the micro SD card:
+
+    $ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+    $ sudo dd if=u-boot-dtb.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
+- Boot mode settings:
+
+  Boot switch position: SW1 -> 0
+			SW2 -> 1
+			SW3 -> 0
+			SW4 -> 0
+			SW5 -> 1
+			SW6 -> 0
+			SW7 -> 0
+			SW8 -> 1
+
+Boot from NAND:
+- Boot the board using SD/MMC or Serial download and load the SPL into memory
+either from SD/MMC or TFTP.
+
+Default MTD layout is 512k(spl),1m(uboot),1m(uboot-dup),-(ubi)
+
+Flash SPL to NAND from SD/MMC,
+
+    $ ext4load mmc 0:2 $loadaddr SPL
+    $ nand erase.part spl
+    $ nandbcb init $loadaddr 0x0 $filesize
+
+Flash u-boot image to NAND from SD/MMC,
+
+    $ ext4load mmc 0:2 $loadaddr u-boot-dtb.img
+    $ nand erase.part uboot
+    $ nand write $loadaddr uboot $filesize
+
+- Boot mode settings:
+
+  Boot switch position: SW1 -> 0
+			SW2 -> 1
+			SW3 -> 1
+			SW4 -> 0
+			SW5 -> 0
+			SW6 -> 1
+			SW7 -> 0
+			SW8 -> 0
+
+- Connect the Serial cable to UART0 and the PC for the console.
+
+- Reset the board using reset button and U-Boot should boot from NAND.
diff --git a/board/seeed/npi_imx6ull/npi_imx6ull.c b/board/seeed/npi_imx6ull/npi_imx6ull.c
new file mode 100644
index 0000000000..eb9ee555c8
--- /dev/null
+++ b/board/seeed/npi_imx6ull/npi_imx6ull.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Linumiz
+ * Author: Navin Sankar Velliangiri <navin@linumiz.com>
+ */
+
+#include <init.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <fsl_esdhc_imx.h>
+#include <linux/bitops.h>
+#include <miiphy.h>
+#include <net.h>
+#include <netdev.h>
+#include <usb.h>
+#include <usb/ehci-ci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+	gd->ram_size = imx_ddr_size();
+
+	return 0;
+}
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE         | PAD_CTL_PUE       | \
+			PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+			PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | \
+			PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const uart1_pads[] = {
+	MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+static void setup_iomux_uart(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+
+	return 0;
+}
+
+#ifdef CONFIG_FEC_MXC
+
+static int setup_fec(int fec_id)
+{
+	struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+	int ret;
+
+	if (fec_id == 0) {
+		/*
+		 * Use 50MHz anatop loopback REF_CLK1 for ENET1,
+		 * clear gpr1[13], set gpr1[17].
+		 */
+		clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC1_MASK,
+				IOMUX_GPR1_FEC1_CLOCK_MUX1_SEL_MASK);
+	} else {
+		/*
+		 * Use 50MHz anatop loopbak REF_CLK2 for ENET2,
+		 * clear gpr1[14], set gpr1[18].
+		 */
+		clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC2_MASK,
+				IOMUX_GPR1_FEC2_CLOCK_MUX1_SEL_MASK);
+	}
+
+	ret = enable_fec_anatop_clock(fec_id, ENET_50MHZ);
+	if (ret)
+		return ret;
+
+	enable_enet_clk(1);
+
+	return 0;
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x8190);
+
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+#endif
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+#ifdef CONFIG_FEC_MXC
+	setup_fec(CONFIG_FEC_ENET_DEV);
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	printf("Board: Seeed NPi i.MX6ULL Dev Board\n");
+
+	return 0;
+}
diff --git a/board/seeed/npi_imx6ull/spl.c b/board/seeed/npi_imx6ull/spl.c
new file mode 100644
index 0000000000..4b56f52d98
--- /dev/null
+++ b/board/seeed/npi_imx6ull/spl.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2021 Linumiz
+ * Author: Navin Sankar Velliangiri <navin@linumiz.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <spl.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/sys_proto.h>
+#include <fsl_esdhc_imx.h>
+
+/* Configuration for Micron MT41K256M16TW-107 32M x 16 x 8 -> 512MiB */
+
+static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
+	.grp_addds = 0x00000030,
+	.grp_ddrmode_ctl = 0x00020000,
+	.grp_b0ds = 0x00000030,
+	.grp_ctlds = 0x00000030,
+	.grp_b1ds = 0x00000030,
+	.grp_ddrpke = 0x00000000,
+	.grp_ddrmode = 0x00020000,
+	.grp_ddr_type = 0x000c0000,
+};
+
+static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
+	.dram_dqm0 = 0x00000030,
+	.dram_dqm1 = 0x00000030,
+	.dram_ras = 0x00000030,
+	.dram_cas = 0x00000030,
+	.dram_odt0 = 0x00000030,
+	.dram_odt1 = 0x00000030,
+	.dram_sdba2 = 0x00000000,
+	.dram_sdclk_0 = 0x00000030,
+	.dram_sdqs0 = 0x00000030,
+	.dram_sdqs1 = 0x00000030,
+	.dram_reset = 0x00000030,
+};
+
+static struct mx6_mmdc_calibration mx6_mmcd_calib = {
+	.p0_mpwldectrl0 = 0x00000000,
+	.p0_mpdgctrl0 = 0x41480148,
+	.p0_mprddlctl = 0x40403E42,
+	.p0_mpwrdlctl = 0x40405852,
+};
+
+struct mx6_ddr_sysinfo ddr_sysinfo = {
+	.dsize = 0,             /* Bus size = 16bit */
+	.cs_density = 32,
+	.ncs = 1,
+	.cs1_mirror = 0,
+	.rtt_wr = 1,
+	.rtt_nom = 1,
+	.walat = 1,             /* Write additional latency */
+	.ralat = 5,             /* Read additional latency */
+	.mif3_mode = 3,         /* Command prediction working mode */
+	.bi_on = 1,             /* Bank interleaving enabled */
+	.pd_fast_exit = 1,
+	.sde_to_rst = 0x10,
+	.rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
+	.ddr_type = DDR_TYPE_DDR3,
+	.refsel = 1,            /* Refresh cycles at 32KHz */
+	.refr = 7,              /* 8 refresh commands per refresh cycle */
+};
+
+static struct mx6_ddr3_cfg mem_ddr = {
+	.mem_speed = 1600,
+	.density = 4,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 15,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+static void ccgr_init(void)
+{
+	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+
+	writel(0xFFFFFFFF, &ccm->CCGR0);
+	writel(0xFFFFFFFF, &ccm->CCGR1);
+	writel(0xFFFFFFFF, &ccm->CCGR2);
+	writel(0xFFFFFFFF, &ccm->CCGR3);
+	writel(0xFFFFFFFF, &ccm->CCGR4);
+	writel(0xFFFFFFFF, &ccm->CCGR5);
+	writel(0xFFFFFFFF, &ccm->CCGR6);
+}
+
+static void spl_dram_init(void)
+{
+	mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
+	mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
+}
+
+#ifdef CONFIG_FSL_ESDHC_IMX
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE         | PAD_CTL_PUE       | \
+			PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW | \
+			PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | \
+			PAD_CTL_HYS)
+
+static iomux_v3_cfg_t const usdhc1_pads[] = {
+	MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_UART1_RTS_B__USDHC1_CD_B | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+
+#ifndef CONFIG_NAND_MXS
+static iomux_v3_cfg_t const usdhc2_pads[] = {
+	MX6_PAD_NAND_RE_B__USDHC2_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_WE_B__USDHC2_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA00__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA01__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA02__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA03__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA04__USDHC2_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA05__USDHC2_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA06__USDHC2_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	MX6_PAD_NAND_DATA07__USDHC2_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+};
+#endif
+
+static struct fsl_esdhc_cfg usdhc_cfg[] = {
+	{
+		.esdhc_base = USDHC1_BASE_ADDR,
+		.max_bus_width = 4,
+	},
+#ifndef CONFIG_NAND_MXS
+	{
+		.esdhc_base = USDHC2_BASE_ADDR,
+		.max_bus_width = 8,
+	},
+#endif
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	return 1;
+}
+
+int board_mmc_init(struct bd_info *bis)
+{
+	int i, ret;
+
+	for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
+		switch (i) {
+		case 0:
+			SETUP_IOMUX_PADS(usdhc1_pads);
+			usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+#ifndef CONFIG_NAND_MXS
+		case 1:
+			SETUP_IOMUX_PADS(usdhc2_pads);
+			usdhc_cfg[i].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
+			break;
+#endif
+		default:
+			printf("Warning - USDHC%d controller not supporting\n",
+			       i + 1);
+			return 0;
+		}
+
+		ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+		if (ret) {
+			printf("Warning: failed to initialize mmc dev %d\n", i);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+#endif /* CONFIG_FSL_ESDHC_IMX */
+
+void board_init_f(ulong dummy)
+{
+	ccgr_init();
+
+	/* Setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	/* Setup iomux and fec */
+	board_early_init_f();
+
+	/* Setup GP timer */
+	timer_init();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+}