diff options
author | Igor Opaniuk <igor.opaniuk@toradex.com> | 2019-11-04 13:12:02 +0300 |
---|---|---|
committer | Stefano Babic <sbabic@denx.de> | 2020-01-07 12:26:56 +0300 |
commit | a781ed271e6707c90180091b9d7b6d43d8ef8c40 (patch) | |
tree | 942c05cca284194a4b94c66d9cdff37c1e0797f6 /board/toradex | |
parent | f9be62a6081c086ab14b2c247ea88a2601112af9 (diff) | |
download | u-boot-a781ed271e6707c90180091b9d7b6d43d8ef8c40.tar.xz |
apalis_imx6: migrate to DM_ETH
Migrate to DM_ETH and remove hardcoded pinmux configuration.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Diffstat (limited to 'board/toradex')
-rw-r--r-- | board/toradex/apalis_imx6/apalis_imx6.c | 51 |
1 files changed, 0 insertions, 51 deletions
diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c index d4d6eed11a..d569782a19 100644 --- a/board/toradex/apalis_imx6/apalis_imx6.c +++ b/board/toradex/apalis_imx6/apalis_imx6.c @@ -177,22 +177,6 @@ iomux_v3_cfg_t const enet_pads[] = { # define GPIO_ENET_PHY_RESET IMX_GPIO_NR(1, 25) }; -static void setup_iomux_enet(void) -{ - imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); -} - -static int reset_enet_phy(struct mii_dev *bus) -{ - /* Reset KSZ9031 PHY */ - gpio_request(GPIO_ENET_PHY_RESET, "ETH_RESET#"); - gpio_direction_output(GPIO_ENET_PHY_RESET, 0); - mdelay(10); - gpio_set_value(GPIO_ENET_PHY_RESET, 1); - - return 0; -} - /* mux the Apalis GPIO pins, so they can be used from the U-Boot cmdline */ iomux_v3_cfg_t const gpio_pads[] = { /* Apalis GPIO1 - GPIO8 */ @@ -367,41 +351,6 @@ int board_phy_config(struct phy_device *phydev) return 0; } -int board_eth_init(bd_t *bis) -{ - uint32_t base = IMX_FEC_BASE; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - int ret; - - setup_iomux_enet(); - -#ifdef CONFIG_FEC_MXC - bus = fec_get_miibus(base, -1); - if (!bus) - return 0; - - bus->reset = reset_enet_phy; - /* scan PHY 4,5,6,7 */ - phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); - if (!phydev) { - free(bus); - puts("no PHY found\n"); - return 0; - } - - printf("using PHY at %d\n", phydev->addr); - ret = fec_probe(bis, -1, base, bus, phydev); - if (ret) { - printf("FEC MXC: %s:failed\n", __func__); - free(phydev); - free(bus); - } -#endif /* CONFIG_FEC_MXC */ - - return 0; -} - static iomux_v3_cfg_t const pwr_intb_pads[] = { /* * the bootrom sets the iomux to vselect, potentially connecting |