diff options
author | Hans de Goede <hdegoede@redhat.com> | 2015-01-13 15:21:46 +0300 |
---|---|---|
committer | Hans de Goede <hdegoede@redhat.com> | 2015-01-22 14:34:55 +0300 |
commit | 6515032e3b88f0774f93fb05deaf20e48a515fe4 (patch) | |
tree | 7f4d251b1b4b07d64e5bff19d2e44c975498ef88 /configs/Ippo_q8h_v1_2_defconfig | |
parent | b56f6e2b4e0291efbe1b50f082dec73272ad7ab3 (diff) | |
download | u-boot-6515032e3b88f0774f93fb05deaf20e48a515fe4.tar.xz |
sunxi: display: Make lcd display clk phase configurable
While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module
I noticed that the screen flickered. This is caused by the lcd display clk
phase reg value being set to 0, where it should be 1 in this setup.
This commit adds a Kconfig option for the lcd display clk phase, so that we
can set it per board. This defaults to 1, because looking at all the fex
files in sunxi-boards, that is by far the most used value.
This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the
default of 1 with 0, as that is the correct value for those tablets, this
keeps the register settings the same as before this commit.
The Olinuxino-A13 defconfigs are not updated, changing the register setting
for these boards from 0 to 1, this is intentional.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Diffstat (limited to 'configs/Ippo_q8h_v1_2_defconfig')
-rw-r--r-- | configs/Ippo_q8h_v1_2_defconfig | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/configs/Ippo_q8h_v1_2_defconfig b/configs/Ippo_q8h_v1_2_defconfig index 0447b06c2b..e68fff0f32 100644 --- a/configs/Ippo_q8h_v1_2_defconfig +++ b/configs/Ippo_q8h_v1_2_defconfig @@ -2,6 +2,7 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" CONFIG_FDTFILE="sun8i-a23-ippo-q8h-v1.2.dtb" CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:167,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_DCLK_PHASE=0 CONFIG_VIDEO_LCD_POWER="PH7" CONFIG_VIDEO_LCD_BL_EN="PH6" CONFIG_VIDEO_LCD_BL_PWM="PH0" |