Merge https://source.denx.de/u-boot/custodians/u-boot-x86

- Fixed broken ICH SPI driver in software sequencer mode
- Added "m25p,fast-read" to SPI flash node for x86 boards
- Drop ROM_NEEDS_BLOBS and BUILD_ROM for x86 ROM builds
- Define a default TSC timer frequency for all x86 boards
- x86 MTRR MSR programming codes bug fixes
- x86 "hob" command bug fixes
- Don't program MTRR for DRAM for FSP1
- Move INIT_PHASE_END_FIRMWARE to FSP2
- Use external graphics card by default on Intel Crown Bay
- tangier: Fix DMA controller IRQ polarity in CSRT

1 files changed, 2 insertions, 11 deletions

diff --git a/doc/arch/x86.rst b/doc/arch/x86.rst
index 2ebfed871b..0fdd43be80 100644
--- a/doc/arch/x86.rst
+++ b/doc/arch/x86.rst
@@ -42,17 +42,8 @@ Build Instructions for U-Boot as BIOS replacement (bare mode)
 -------------------------------------------------------------
 Building a ROM version of U-Boot (hereafter referred to as u-boot.rom) is a
 little bit tricky, as generally it requires several binary blobs which are not
-shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build is
-not turned on by default in the U-Boot source tree. Firstly, you need turn it
-on by enabling the ROM build either via an environment variable::
-
-   $ export BUILD_ROM=y
-
-or via configuration::
-
-   CONFIG_BUILD_ROM=y
-
-Both tell the Makefile to build u-boot.rom as a target.
+shipped in the U-Boot source tree. Due to this reason, the u-boot.rom build may
+print some warnings if required binary blobs (e.g.: FSP) are not present.
 
 CPU Microcode
 -------------