diff options
| author | Alan Ott <alan@softiron.com> | 2017-11-29 06:25:24 +0300 |
|---|---|---|
| committer | Heiko Schocher <hs@denx.de> | 2017-12-07 11:29:19 +0300 |
| commit | cab8a27d80afbdcb7ba422c4c4f85130678373a9 (patch) | |
| tree | 33a083bed997bd2da2dd260f8febad8796fea732 /drivers/i2c | |
| parent | 0afbb0e1c01382f4bcd728ecbd4e49a928dbbccb (diff) | |
| download | u-boot-cab8a27d80afbdcb7ba422c4c4f85130678373a9.tar.xz | |
i2c: at91_i2c: remove the .probe_chip function
The .probe_chip function is supposed to probe an i2c device on the bus to
determine whether a device is answering to a particular address.
at91_i2c_probe_chip() did not do anything resembling this and always
returned 0.
It looks as though at91_i2c_probe_chip() was intended to be a .probe
function for the controller, as it was copied-and-pasted to become
at91_i2c_probe() in 0bc8f640a4d7ed.
Removing the at91_i2c_probe_chip() function makes the higher layer
(i2c_probe_chip()) try a zero-length read transfer to test for the
presence of a device instead, which does work.
Signed-off-by: Alan Ott <alan@softiron.com>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'drivers/i2c')
| -rw-r--r-- | drivers/i2c/at91_i2c.c | 22 |
1 files changed, 0 insertions, 22 deletions
diff --git a/drivers/i2c/at91_i2c.c b/drivers/i2c/at91_i2c.c index 20d09296a1..7917ca1231 100644 --- a/drivers/i2c/at91_i2c.c +++ b/drivers/i2c/at91_i2c.c @@ -201,27 +201,6 @@ static int at91_i2c_enable_clk(struct udevice *dev) return 0; } -static int at91_i2c_probe_chip(struct udevice *dev, uint chip, uint chip_flags) -{ - struct at91_i2c_bus *bus = dev_get_priv(dev); - struct at91_i2c_regs *reg = bus->regs; - int ret; - - ret = at91_i2c_enable_clk(dev); - if (ret) - return ret; - - writel(TWI_CR_SWRST, ®->cr); - - at91_calc_i2c_clock(dev, bus->clock_frequency); - - writel(bus->cwgr_val, ®->cwgr); - writel(TWI_CR_MSEN, ®->cr); - writel(TWI_CR_SVDIS, ®->cr); - - return 0; -} - static int at91_i2c_set_bus_speed(struct udevice *dev, unsigned int speed) { struct at91_i2c_bus *bus = dev_get_priv(dev); @@ -256,7 +235,6 @@ static int at91_i2c_ofdata_to_platdata(struct udevice *dev) static const struct dm_i2c_ops at91_i2c_ops = { .xfer = at91_i2c_xfer, - .probe_chip = at91_i2c_probe_chip, .set_bus_speed = at91_i2c_set_bus_speed, .get_bus_speed = at91_i2c_get_bus_speed, }; |