diff options
| -rw-r--r-- | drivers/fpga/virtex2.c | 96 | ||||
| -rw-r--r-- | include/virtex2.h | 13 |
2 files changed, 86 insertions, 23 deletions
diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c index 502824424c..395736875f 100644 --- a/drivers/fpga/virtex2.c +++ b/drivers/fpga/virtex2.c @@ -3,6 +3,8 @@ * (C) Copyright 2002 * Rich Ireland, Enterasys Networks, rireland@enterasys.com. * Keith Outwater, keith_outwater@mvis.com + * + * Copyright (c) 2019 SED Systems, a division of Calian Ltd. */ /* @@ -141,8 +143,8 @@ static int virtex2_info(xilinx_desc *desc) } /* - * Virtex-II Slave SelectMap configuration loader. Configuration via - * SelectMap is as follows: + * Virtex-II Slave SelectMap or Serial configuration loader. Configuration + * is as follows: * 1. Set the FPGA's PROG_B line low. * 2. Set the FPGA's PROG_B line high. Wait for INIT_B to go high. * 3. Write data to the SelectMap port. If INIT_B goes low at any time @@ -154,7 +156,7 @@ static int virtex2_info(xilinx_desc *desc) * INIT_B and DONE lines. If both are high, configuration has * succeeded. Congratulations! */ -static int virtex2_slave_pre(xilinx_virtex2_slave_selectmap_fns *fn, int cookie) +static int virtex2_slave_pre(xilinx_virtex2_slave_fns *fn, int cookie) { unsigned long ts; @@ -243,7 +245,7 @@ static int virtex2_slave_pre(xilinx_virtex2_slave_selectmap_fns *fn, int cookie) return FPGA_SUCCESS; } -static int virtex2_slave_post(xilinx_virtex2_slave_selectmap_fns *fn, +static int virtex2_slave_post(xilinx_virtex2_slave_fns *fn, int cookie) { int ret_val = FPGA_SUCCESS; @@ -284,11 +286,16 @@ static int virtex2_slave_post(xilinx_virtex2_slave_selectmap_fns *fn, ret_val = FPGA_FAIL; break; } - (*fn->wdata) (0xff, true, cookie); - CONFIG_FPGA_DELAY(); - (*fn->clk) (false, true, cookie); - CONFIG_FPGA_DELAY(); - (*fn->clk) (true, true, cookie); + if (fn->wbulkdata) { + unsigned char dummy = 0xff; + (*fn->wbulkdata)(&dummy, 1, true, cookie); + } else { + (*fn->wdata)(0xff, true, cookie); + CONFIG_FPGA_DELAY(); + (*fn->clk)(false, true, cookie); + CONFIG_FPGA_DELAY(); + (*fn->clk)(true, true, cookie); + } } if (ret_val == FPGA_SUCCESS) { @@ -312,7 +319,7 @@ static int virtex2_slave_post(xilinx_virtex2_slave_selectmap_fns *fn, static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; - xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; + xilinx_virtex2_slave_fns *fn = desc->iface_fns; size_t bytecount = 0; unsigned char *data = (unsigned char *)buf; int cookie = desc->cookie; @@ -387,7 +394,7 @@ static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize) static int virtex2_ssm_dump(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; - xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; + xilinx_virtex2_slave_fns *fn = desc->iface_fns; if (fn) { unsigned char *data = (unsigned char *)buf; @@ -438,8 +445,71 @@ static int virtex2_ssm_dump(xilinx_desc *desc, const void *buf, size_t bsize) static int virtex2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) { - printf("%s: Slave Serial Loading is unsupported\n", __func__); - return FPGA_FAIL; + int ret_val = FPGA_FAIL; + xilinx_virtex2_slave_fns *fn = desc->iface_fns; + unsigned char *data = (unsigned char *)buf; + int cookie = desc->cookie; + + ret_val = virtex2_slave_pre(fn, cookie); + if (ret_val != FPGA_SUCCESS) + return ret_val; + + if (fn->wbulkdata) { + /* Load the data in a single chunk */ + (*fn->wbulkdata)(data, bsize, true, cookie); + } else { + size_t bytecount = 0; + + /* + * Load the data bit by bit + */ + while (bytecount < bsize) { + unsigned char curr_data = data[bytecount++]; + int bit; + +#ifdef CONFIG_SYS_FPGA_CHECK_CTRLC + if (ctrlc()) { + (*fn->abort) (cookie); + return FPGA_FAIL; + } +#endif + + if ((*fn->done)(cookie) == FPGA_SUCCESS) { + PRINTF("%s:%d:done went active early, bytecount = %d\n", + __func__, __LINE__, bytecount); + break; + } + +#ifdef CONFIG_SYS_FPGA_CHECK_ERROR + if ((*fn->init)(cookie)) { + printf("\n%s:%d: ** Error: INIT asserted during configuration\n", + __func__, __LINE__); + printf("%zu = buffer offset, %zu = buffer size\n", + bytecount, bsize); + (*fn->abort)(cookie); + return FPGA_FAIL; + } +#endif + + for (bit = 7; bit >= 0; --bit) { + unsigned char curr_bit = (curr_data >> bit) & 1; + (*fn->wdata)(curr_bit, true, cookie); + CONFIG_FPGA_DELAY(); + (*fn->clk)(false, true, cookie); + CONFIG_FPGA_DELAY(); + (*fn->clk)(true, true, cookie); + } + + /* Slave serial never uses a busy pin */ + +#ifdef CONFIG_SYS_FPGA_PROG_FEEDBACK + if (bytecount % (bsize / 40) == 0) + putc('.'); +#endif + } + } + + return virtex2_slave_post(fn, cookie); } static int virtex2_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize) diff --git a/include/virtex2.h b/include/virtex2.h index a48113060e..7e8d93f24d 100644 --- a/include/virtex2.h +++ b/include/virtex2.h @@ -11,7 +11,7 @@ #include <xilinx.h> /* - * Slave SelectMap Implementation function table. + * Slave SelectMap or Serial Implementation function table. */ typedef struct { xilinx_pre_fn pre; @@ -24,18 +24,11 @@ typedef struct { xilinx_wr_fn wr; xilinx_rdata_fn rdata; xilinx_wdata_fn wdata; + xilinx_bwr_fn wbulkdata; xilinx_busy_fn busy; xilinx_abort_fn abort; xilinx_post_fn post; -} xilinx_virtex2_slave_selectmap_fns; - -/* Slave Serial Implementation function table */ -typedef struct { - xilinx_pgm_fn pgm; - xilinx_clk_fn clk; - xilinx_rdata_fn rdata; - xilinx_wdata_fn wdata; -} xilinx_virtex2_slave_serial_fns; +} xilinx_virtex2_slave_fns; #if defined(CONFIG_FPGA_VIRTEX2) extern struct xilinx_fpga_op virtex2_op; |