diff options
Diffstat (limited to 'arch/arm/dts/imx8mm-verdin.dtsi')
-rw-r--r-- | arch/arm/dts/imx8mm-verdin.dtsi | 50 |
1 files changed, 37 insertions, 13 deletions
diff --git a/arch/arm/dts/imx8mm-verdin.dtsi b/arch/arm/dts/imx8mm-verdin.dtsi index eafa88d980..bcab830c6e 100644 --- a/arch/arm/dts/imx8mm-verdin.dtsi +++ b/arch/arm/dts/imx8mm-verdin.dtsi @@ -32,10 +32,10 @@ }; /* Fixed clock dedicated to SPI CAN controller */ - clk20m: oscillator { + clk40m: oscillator { compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <20000000>; + clock-frequency = <40000000>; }; gpio-keys { @@ -43,7 +43,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - wakeup { + key-wakeup { debounce-interval = <10>; /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */ gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; @@ -53,6 +53,21 @@ }; }; + hdmi_connector: hdmi-connector { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&i2c2>; + label = "hdmi"; + type = "a"; + status = "disabled"; + }; + + panel_lvds: panel-lvds { + compatible = "panel-lvds"; + backlight = <&backlight>; + data-mapping = "vesa-24"; + status = "disabled"; + }; + /* Carrier Board Supplies */ reg_1p8v: regulator-1p8v { compatible = "regulator-fixed"; @@ -154,6 +169,14 @@ cpu-supply = <®_vdd_arm>; }; +&cpu_alert0 { + temperature = <95000>; +}; + +&cpu_crit0 { + temperature = <105000>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>; @@ -194,8 +217,8 @@ can1: can@0 { compatible = "microchip,mcp251xfd"; - clocks = <&clk20m>; - interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>; + clocks = <&clk40m>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_can1_int>; reg = <0>; @@ -359,8 +382,8 @@ nxp,dvs-standby-voltage = <850000>; regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1050000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_ARM (BUCK2)"; regulator-ramp-delay = <3125>; }; @@ -368,8 +391,8 @@ reg_vdd_dram: BUCK3 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <950000>; - regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; + regulator-min-microvolt = <805000>; regulator-name = "On-module +VDD_GPU_VPU_DDR (BUCK3)"; }; @@ -408,7 +431,7 @@ reg_vdd_snvs: LDO2 { regulator-always-on; regulator-boot-on; - regulator-max-microvolt = <900000>; + regulator-max-microvolt = <800000>; regulator-min-microvolt = <800000>; regulator-name = "On-module +V0.8_SNVS (LDO2)"; }; @@ -553,8 +576,8 @@ status = "disabled"; }; - lvds_ti_sn65dsi83: bridge@2c { - compatible = "ti,sn65dsi83"; + lvds_ti_sn65dsi84: bridge@2c { + compatible = "ti,sn65dsi84"; /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */ /* Verdin GPIO_10_DSI (SODIMM 21) */ enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>; @@ -595,7 +618,7 @@ pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>; reg = <0x4a>; /* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */ - reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; status = "disabled"; }; @@ -737,6 +760,7 @@ }; &usbphynop2 { + power-domains = <&pgc_otg2>; vcc-supply = <®_vdd_3v3>; }; |