summaryrefslogtreecommitdiff
path: root/arch/arm/dts/zynqmp-zcu102-revA.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts/zynqmp-zcu102-revA.dts')
-rw-r--r--arch/arm/dts/zynqmp-zcu102-revA.dts20
1 files changed, 11 insertions, 9 deletions
diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts
index a2128ebfd8..64a883b96e 100644
--- a/arch/arm/dts/zynqmp-zcu102-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu102-revA.dts
@@ -14,6 +14,7 @@
#include "zynqmp-clk.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+#include <dt-bindings/phy/phy.h>
/ {
model = "ZynqMP ZCU102 RevA";
@@ -80,16 +81,10 @@
/* fpd_dma clk 667MHz, lpd_dma 500MHz */
&fpd_dma_chan1 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
- xlnx,overfetch; /* for testing purpose */
- xlnx,ratectrl = <0>; /* for testing purpose */
- xlnx,src-issue = <31>;
};
&fpd_dma_chan2 {
status = "okay";
- xlnx,ratectrl = <100>; /* for testing purpose */
- xlnx,src-issue = <4>; /* for testing purpose */
};
&fpd_dma_chan3 {
@@ -98,7 +93,6 @@
&fpd_dma_chan4 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
};
&fpd_dma_chan5 {
@@ -107,7 +101,6 @@
&fpd_dma_chan6 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
};
&fpd_dma_chan7 {
@@ -116,7 +109,6 @@
&fpd_dma_chan8 {
status = "okay";
- xlnx,include-sg; /* for testing purpose */
};
&gem3 {
@@ -884,6 +876,8 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
+ phy-names = "sata-phy";
+ phys = <&lane3 PHY_TYPE_SATA 1 1 125000000>;
};
/* SD1 with level shifter */
@@ -895,6 +889,10 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
xlnx,mio_bank = <1>;
};
+&serdes {
+ status = "okay";
+};
+
&uart0 {
status = "okay";
pinctrl-names = "default";
@@ -917,6 +915,10 @@ drivers/hwmon/pmbus/Makefile:11:obj-$(CONFIG_SENSORS_MAX20751) += max20751.o
&dwc3_0 {
status = "okay";
dr_mode = "host";
+ snps,usb3_lpm_capable;
+ phy-names = "usb3-phy";
+ phys = <&lane2 PHY_TYPE_USB3 0 2 26000000>;
+ maximum-speed = "super-speed";
};
&watchdog0 {