diff options
Diffstat (limited to 'board/altera/cyclone5-socdk/socfpga.c')
-rw-r--r-- | board/altera/cyclone5-socdk/socfpga.c | 85 |
1 files changed, 85 insertions, 0 deletions
diff --git a/board/altera/cyclone5-socdk/socfpga.c b/board/altera/cyclone5-socdk/socfpga.c new file mode 100644 index 0000000000..a1dbc492c9 --- /dev/null +++ b/board/altera/cyclone5-socdk/socfpga.c @@ -0,0 +1,85 @@ +/* + * Copyright (C) 2012 Altera Corporation <www.altera.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arch/reset_manager.h> +#include <asm/io.h> + +#include <usb.h> +#include <usb/s3c_udc.h> +#include <usb_mass_storage.h> + +#include <micrel.h> +#include <netdev.h> +#include <phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +void s_init(void) {} + +/* + * Miscellaneous platform dependent initialisations + */ +int board_init(void) +{ + /* Address of boot parameters for ATAG (if ATAG is used) */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +/* + * PHY configuration + */ +#ifdef CONFIG_PHY_MICREL_KSZ9021 +int board_phy_config(struct phy_device *phydev) +{ + int ret; + /* + * These skew settings for the KSZ9021 ethernet phy is required for ethernet + * to work reliably on most flavors of cyclone5 boards. + */ + ret = ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, + 0x0); + if (ret) + return ret; + + ret = ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, + 0x0); + if (ret) + return ret; + + ret = ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, + 0xf0f0); + if (ret) + return ret; + + if (phydev->drv->config) + return phydev->drv->config(phydev); + + return 0; +} +#endif + +#ifdef CONFIG_USB_GADGET +struct s3c_plat_otg_data socfpga_otg_data = { + .regs_otg = CONFIG_USB_DWC2_REG_ADDR, + .usb_gusbcfg = 0x1417, +}; + +int board_usb_init(int index, enum usb_init_type init) +{ + return s3c_udc_probe(&socfpga_otg_data); +} + +int g_dnl_board_usb_cable_connected(void) +{ + return 1; +} +#endif |