2 files changed, 5 insertions, 47 deletions
diff --git a/board/freescale/ls2080aqds/ls2080aqds.c b/board/freescale/ls2080aqds/ls2080aqds.c
index 9572319234..c48b01f7d7 100644
--- a/board/freescale/ls2080aqds/ls2080aqds.c
+++ b/board/freescale/ls2080aqds/ls2080aqds.c
@@ -23,7 +23,7 @@
 #include <fsl_sec.h>
 #include <asm/arch/ppa.h>
 #include <asm/arch-fsl-layerscape/fsl_icid.h>
-
+#include "../common/i2c_mux.h"
 
 #include "../common/qixis.h"
 #include "ls2080aqds_qixis.h"
@@ -161,27 +161,6 @@ unsigned long get_board_ddr_clk(void)
 	return 66666666;
 }
 
-int select_i2c_ch_pca9547(u8 ch)
-{
-	int ret;
-#if CONFIG_IS_ENABLED(DM_I2C)
-	struct udevice *dev;
-
-	ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
-	if (!ret)
-		ret = dm_i2c_write(dev, 0, &ch, 1);
-
-#else
-	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
-#endif
-	if (ret) {
-		puts("PCA: failed to select proper channel\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 int config_board_mux(int ctrl_type)
 {
 	u8 reg5;
@@ -235,7 +214,7 @@ int board_init(void)
 #ifdef CONFIG_ENV_IS_NOWHERE
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 
 #ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT
 #if CONFIG_IS_ENABLED(DM_I2C)
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index 3a026b0827..6504cf768f 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -25,6 +25,7 @@
 #include <asm/arch/ppa.h>
 #include <fsl_sec.h>
 #include <asm/arch-fsl-layerscape/fsl_icid.h>
+#include "../common/i2c_mux.h"
 
 #ifdef CONFIG_FSL_QIXIS
 #include "../common/qixis.h"
@@ -205,31 +206,9 @@ unsigned long get_board_sys_clk(void)
 	return 100000000;
 }
 
-int select_i2c_ch_pca9547(u8 ch)
-{
-	int ret;
-
-#if !CONFIG_IS_ENABLED(DM_I2C)
-	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
-#else
-	struct udevice *dev;
-
-	ret = i2c_get_chip_for_busnum(0, I2C_MUX_PCA_ADDR_PRI, 1, &dev);
-	if (!ret)
-		ret = dm_i2c_write(dev, 0, &ch, 1);
-#endif
-
-	if (ret) {
-		puts("PCA: failed to select proper channel\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-	return select_i2c_ch_pca9547(channel);
+	return select_i2c_ch_pca9547(channel, 0);
 }
 
 int config_board_mux(int ctrl_type)
@@ -267,7 +246,7 @@ int board_init(void)
 #ifdef CONFIG_ENV_IS_NOWHERE
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
-	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 
 #ifdef CONFIG_FSL_QIXIS
 	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET_EN);